Your free source for specifications, standards, and handbooks
SAE
SAE AEROSPACE TECHNICAL REPORT STYLE MANUAL (AUG 2007)
SAE AEROSPACE TECHNICAL REPORT STYLE MANUAL (AUG 2007)., This SAE Aerospace Technical Report Style Manual was prepared specifically for sponsors of SAE Aerospace Technical Reports (excluding Aerospace Material Specifications (AMS)). It contains all pertinent editorial and technical requirements for the preparation of SAE Aerospace Technical Reports, Aerospace Standards, Aerospace Recommended Practices, Aerospace Information Reports, and Aerospace Resource Documents (in inch-pound units/SI units versions). Editorial and technical requirements for the preparation of SAE AMS specifications can be found in the Manual for the Preparation of Aerospace Material Specifications.
Ident. Num:
No Number
Rev. Num:
-
SAE AEROSPACE TECHNICAL REPORT STYLE MANUAL (AUG 2007)., This SAE Aerospace Technical Report Style Manual was prepared specifically for sponsors of SAE Aerospace Technical Reports (excluding Aerospace Material Specifications (AMS)). It contains all pertinent editorial and technical requirements for the preparation of SAE Aerospace Technical Reports, Aerospace Standards, Aerospace Recommended Practices, Aerospace Information Reports, and Aerospace Resource Documents (in inch-pound units/SI units versions). Editorial and technical requirements for the preparation of SAE AMS specifications can be found in the Manual for the Preparation of Aerospace Material Specifications.
SAE-AMS-H-6875, ADOPTION NOTICE (2 FEB 1999)
SAE-AMS-H-6875, ADOPTION NOTICE (2 FEB 1999)., SAE-AMS-H-6875, "HEAT TREATMENT OF STEEL RAW MATERIALS", was adopted on 02-FEB-99 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-AMS-H-6875
Rev. Num:
-
SAE-AMS-H-6875, ADOPTION NOTICE (2 FEB 1999)., SAE-AMS-H-6875, "HEAT TREATMENT OF STEEL RAW MATERIALS", was adopted on 02-FEB-99 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
SAE-AMS-T-6845, ADOPTION NOTICE (5 FEB 1999)
SAE-AMS-T-6845, ADOPTION NOTICE (5 FEB 1999)., SAE-AMS-T-6845, "TUBING, STEEL, CORROSION-RESISTANT (S30400), AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION", was adopted on 05-FEB-99 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: ASC/ENOI, Building 560, 2530 Loop Road West, Wright-Patterson AFB, OH 45433-7101. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-AMS-T-6845
Rev. Num:
-
SAE-AMS-T-6845, ADOPTION NOTICE (5 FEB 1999)., SAE-AMS-T-6845, "TUBING, STEEL, CORROSION-RESISTANT (S30400), AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION", was adopted on 05-FEB-99 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: ASC/ENOI, Building 560, 2530 Loop Road West, Wright-Patterson AFB, OH 45433-7101. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
SAE-AMS5513 ADOPTION NOTICE (20 DEC 1991)
SAE-AMS5513 ADOPTION NOTICE (20 DEC 1991)., SAE-AMS5513, "STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 19CR - 9.2NI (SAE 30304) SOLUTION HEAT TREATED", was adopted on 20-DEC-91 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ILEA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-AMS5513
Rev. Num:
-
SAE-AMS5513 ADOPTION NOTICE (20 DEC 1991)., SAE-AMS5513, "STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 19CR - 9.2NI (SAE 30304) SOLUTION HEAT TREATED", was adopted on 20-DEC-91 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ILEA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
SAE-AMS5514, ADOPTION NOTICE (20 DEC 1991)
SAE-AMS5514, ADOPTION NOTICE (20 DEC 1991)., STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 18CR - 11.5NI (SAE 30305) SOLUTION HEAT TREATED (20 Dec 1991)., This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate.
Ident. Num:
SAE-AMS5514
Rev. Num:
-
SAE-AMS5514, ADOPTION NOTICE (20 DEC 1991)., STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 18CR - 11.5NI (SAE 30305) SOLUTION HEAT TREATED (20 Dec 1991)., This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate.
SAE-AMS5518 ADOPTION NOTICE (15 AUG 1990)
SAE-AMS5518 ADOPTION NOTICE (15 AUG 1990)., SAE-AMS5518, "STEEL, CORROSION RESISTANT, SHEET AND STRIP 18CR - 8NI (SAE 30301) COLD ROLLED, 150 KSI (1034 MPA) TENSILE STRENGTH", was adopted on 15-AUG-90 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ILEA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-AMS5518
Rev. Num:
-
SAE-AMS5518 ADOPTION NOTICE (15 AUG 1990)., SAE-AMS5518, "STEEL, CORROSION RESISTANT, SHEET AND STRIP 18CR - 8NI (SAE 30301) COLD ROLLED, 150 KSI (1034 MPA) TENSILE STRENGTH", was adopted on 15-AUG-90 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ILEA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
SAE-AMS5840, ADOPTION NOTICE (15 AUG 1990)
SAE-AMS5840, ADOPTION NOTICE (15 AUG 1990)., SAE-AMS5840, "STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 13CR - 8.0NI - 2.3MO - 1.1AL VACUUM MELTED", was adopted on 15-AUG-90 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Defense Supply Center Richmond, Attn: DSCR-VBD, Richmond, VA 23297-5610. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001. h_t_t_p_:_/_/_w_w_w_._s_a_e_._o_r_g_/_
Ident. Num:
SAE-AMS5840
Rev. Num:
-
SAE-AMS5840, ADOPTION NOTICE (15 AUG 1990)., SAE-AMS5840, "STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 13CR - 8.0NI - 2.3MO - 1.1AL VACUUM MELTED", was adopted on 15-AUG-90 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Defense Supply Center Richmond, Attn: DSCR-VBD, Richmond, VA 23297-5610. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001. h_t_t_p_:_/_/_w_w_w_._s_a_e_._o_r_g_/_
SAE-AMS6526, ADOPTION NOTICE (15 AUG 1990)
SAE-AMS6526, ADOPTION NOTICE (15 AUG 1990)., SAE-AMS6526, "STEEL BARS, FORGINGS, TUBING, AND RINGS 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V - (0.29-0.34C) CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED", was adopted on 15-AUG-90 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-AMS6526
Rev. Num:
-
SAE-AMS6526, ADOPTION NOTICE (15 AUG 1990)., SAE-AMS6526, "STEEL BARS, FORGINGS, TUBING, AND RINGS 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V - (0.29-0.34C) CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED", was adopted on 15-AUG-90 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
SAE-ARP1575 ADOPTION NOTICE (20 DEC 1991)
SAE-ARP1575 ADOPTION NOTICE (20 DEC 1991)., SAE-ARP1575, "ALUMINUM ALLOY PARTS FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING HAND APPLIED PHOSPHORIC ACID ANODIZING, SURFACE PREPARATION AND PRIMING OF", was adopted on 20-DEC-91 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: ASC/ENOI, Building 560, 2530 Loop Road West, Wright-Patterson AFB, OH 45433-7101. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-ARP1575
Rev. Num:
-
SAE-ARP1575 ADOPTION NOTICE (20 DEC 1991)., SAE-ARP1575, "ALUMINUM ALLOY PARTS FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING HAND APPLIED PHOSPHORIC ACID ANODIZING, SURFACE PREPARATION AND PRIMING OF", was adopted on 20-DEC-91 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: ASC/ENOI, Building 560, 2530 Loop Road West, Wright-Patterson AFB, OH 45433-7101. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
SAE-AS25487 ADOPTION NOTICE (20 FEB 2006)
SAE-AS25487 ADOPTION NOTICE (20 FEB 2006)., SAE-AS25487, “Connector, Plug, Attachable External Electric Power, Aircraft, 28 Volt DC, Jet Starting,” was adopted on February 20, 2006, for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: The Naval Air Systems Command (Commander, Naval Air Warfare Center Aircraft Division, Code 491000B120-3, Highway 547, Lakehurst, NJ 08733-5100). Copies of this document may be purchased from the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001 or www.sae.org. SAE-AS25487 should be used instead of MS25487G, which was canceled on February 20, 2006.
Ident. Num:
SAE-AS25487
Rev. Num:
-
SAE-AS25487 ADOPTION NOTICE (20 FEB 2006)., SAE-AS25487, “Connector, Plug, Attachable External Electric Power, Aircraft, 28 Volt DC, Jet Starting,” was adopted on February 20, 2006, for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: The Naval Air Systems Command (Commander, Naval Air Warfare Center Aircraft Division, Code 491000B120-3, Highway 547, Lakehurst, NJ 08733-5100). Copies of this document may be purchased from the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001 or www.sae.org. SAE-AS25487 should be used instead of MS25487G, which was canceled on February 20, 2006.
SAE-AS50881, ADOPTION NOTICE (30 SEP 1998)
SAE-AS50881, ADOPTION NOTICE (30 SEP 1998)., SAE-AS50881, "WIRING, AEROSPACE VEHICLE", was adopted on 30-SEP-98 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-AS50881
Rev. Num:
-
SAE-AS50881, ADOPTION NOTICE (30 SEP 1998)., SAE-AS50881, "WIRING, AEROSPACE VEHICLE", was adopted on 30-SEP-98 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
SAE-AS5202, ADOPTION NOTICE (17 JUL 2002)
SAE-AS5202, ADOPTION NOTICE (17 JUL 2002)., SAE AS5202 should be used instead of MS33649, which was cancelled on 17 July 2002. SAE-AS5202, "Port or Fitting End, Internal Straight Thread", was adopted on 17-JUL-02 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Defense Supply Center Columbus, P.O. Box 3990, Attn: DSCC-VAI, Columbus, OH 43216-5000. Copies of this document may be purchased from the Society of Automotive Engineers Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001 .
Ident. Num:
SAE-AS5202,
Rev. Num:
-
SAE-AS5202, ADOPTION NOTICE (17 JUL 2002)., SAE AS5202 should be used instead of MS33649, which was cancelled on 17 July 2002. SAE-AS5202, "Port or Fitting End, Internal Straight Thread", was adopted on 17-JUL-02 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Defense Supply Center Columbus, P.O. Box 3990, Attn: DSCC-VAI, Columbus, OH 43216-5000. Copies of this document may be purchased from the Society of Automotive Engineers Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001 .
SAE-AS568, ADOPTION NOTICE (12 JUL 2005)
SAE-AS568, ADOPTION NOTICE (12 JUL 2005)., SAE-AS568, “O-RINGS, AEROSPACE SIZE STANDARD FOR”, was adopted on 12 JULY 2005 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Supply Center Philadelphia, ATTN: DSCP-ITA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document are available from the SOCIETY OF AUTOMOTIVE ENGINEERS, INC., 400 COMMONWEALTH DRIVE, WARRENDALE, PA 15096- 0001.
Ident. Num:
SAE-AS568
Rev. Num:
-
SAE-AS568, ADOPTION NOTICE (12 JUL 2005)., SAE-AS568, “O-RINGS, AEROSPACE SIZE STANDARD FOR”, was adopted on 12 JULY 2005 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Supply Center Philadelphia, ATTN: DSCP-ITA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document are available from the SOCIETY OF AUTOMOTIVE ENGINEERS, INC., 400 COMMONWEALTH DRIVE, WARRENDALE, PA 15096- 0001.
SAE-AS7928, ADOPTION NOTICE (31 AUG 1999)
SAE-AS7928, ADOPTION NOTICE (31 AUG 1999)., SAE-AS7928, "TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR", was adopted on 31-AUG-99 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-AS7928
Rev. Num:
-
SAE-AS7928, ADOPTION NOTICE (31 AUG 1999)., SAE-AS7928, "TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR", was adopted on 31-AUG-99 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
SAE-AS8879, ADOPTION NOTICE (14 MAY 2003)
SAE-AS8879, ADOPTION NOTICE (14 MAY 2003)., SAE-AS8879, "Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter", was adopted on 14-MAY-03 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001.
Ident. Num:
SAE-AS8879
Rev. Num:
-
SAE-AS8879, ADOPTION NOTICE (14 MAY 2003)., SAE-AS8879, "Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter", was adopted on 14-MAY-03 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE-MA3343, ADOPTION NOTICE (15 SEP 1988)
SAE-MA3343, ADOPTION NOTICE (15 SEP 1988)., SAE-MA3343, "BOLT, MACHINE - SPLINE DRIVE EXTENDED WASHER, FULL SHANK, LONG THREAD, AMS 5662, METRIC", was adopted on 15-SEP-88 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-MA3343
Rev. Num:
-
SAE-MA3343, ADOPTION NOTICE (15 SEP 1988)., SAE-MA3343, "BOLT, MACHINE - SPLINE DRIVE EXTENDED WASHER, FULL SHANK, LONG THREAD, AMS 5662, METRIC", was adopted on 15-SEP-88 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
SAE-MA3350, ADOPTION NOTICE (16 JUN 1986)
SAE-MA3350, ADOPTION NOTICE (16 JUN 1986)., SAE-MA3350, "NUT, CASTELLATED, HEX - UNS S66286 MJ THREAD, METRIC", was adopted on 16-JUN-86 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
Ident. Num:
SAE-MA3350
Rev. Num:
-
SAE-MA3350, ADOPTION NOTICE (16 JUN 1986)., SAE-MA3350, "NUT, CASTELLATED, HEX - UNS S66286 MJ THREAD, METRIC", was adopted on 16-JUN-86 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Copies of this document may be purchased from the Society of Automotive Engineers 400 Commonwealth Drive Warrendale, Pennsylvania, United States, 15096-0001.
