Your free source for specifications, standards, and handbooks
NASA - PRC Specs
Ident. Num:
PRC-0001
Rev. Num:
G
PRC-0001 (Rev. G), PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF ALUMINUM ALLOY HARDWARE.This process specification provides the minimum requirements that govern the manual arc welding of aluminum alloy hardware. Design, procedural and quality assurance requirements are given. All work instructions and Weld Procedure Specifications (WPS) used during welding shall satisfy the requirements of this process specification.
Ident. Num:
PRC-0001
Rev. Num:
F
PRC-0001(REV.F), PROCESS SPECIFICATION FOR THE HEAT TREATMENT OF STEEL ALLOYS (OCTOBER 2006., This process specification establishes the engineering requirements for the heat treatment of steel and stainless steel alloys.
Ident. Num:
PRC-0001
Rev. Num:
G
PRC-0001 (REV.G), PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF ALUMINUM ALLOY HARDWARE (NOV 2007)., This process specification provides the minimum requirements that govern the manual arc welding of aluminum alloy hardware. Design, procedural and quality assurance requirements are given. All work instructions and Weld Procedure Specifications (WPS) used during welding shall satisfy the requirements of this process specification.
Ident. Num:
PRC-0001
Rev. Num:
G
PRC-0001(REV.G), PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF ALUMINUM ALLOY HARDWARE (NOVEMBER 2007) This process specification provides the minimum requirements that govern the manual arc welding of aluminum alloy hardware. Design, procedural and quality assurance requirements are given. All work instructions and Weld Procedure Specifications (WPS) used during welding shall satisfy the requirements of this process specification.
Ident. Num:
PRC-0002
Rev. Num:
B
PRC-0002(REV.B), PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF TITANIUM ALLOY HARDWARE (DECEMBER 2003) This process specification provides the minimum requirements that govern the manual arc welding of titanium alloy flight and non flight hardware. Procedural and quality assurance requirements are given. All work instructions and Welding Procedure Specifications (WPS) used during welding shall satisfy the requirements of this process specification and its applicable documents.
Ident. Num:
PRC-0005
Rev. Num:
F
PRC-0005 (REV F), PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF CARBON STEEL AND NICKEL ALLOY HARDWARE (NOV 2007). This process specification provides the minimum requirements that govern the manual arc welding of carbon steel and nickel alloy flight and non flight hardware. Design, procedural and quality assurance requirements are given. All work instructions and Weld Procedure Specifications (WPS) used during welding shall satisfy the requirements of this process specification.
Ident. Num:
PRC-0005
Rev. Num:
F
PRC-0005(REV.F), PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF CARBON STEEL AND NICKEL ALLOY HARDWARE (NOVEMBER 2007) This process specification provides the minimum requirements that govern the manual arc welding of carbon steel and nickel alloy flight and non flight hardware. Design, procedural and quality assurance requirements are given. All work instructions and Weld Procedure Specifications (WPS) used during welding shall satisfy the requirements of this process specification.
Ident. Num:
PRC-0009
Rev. Num:
D
PRC-0009(REV.D), PROCESS SPECIFICATION FOR THE RESISTANCE SPOT WELDING OF BATTERY AND ELECTRONIC ASSEMBLIES (FEBRUARY 2004) This process specification provides the requirements that govern the Resistance Spot Welding (RSW) of battery tabs and component wires/leads to batteries, battery tabs, or other associated electronic components. Procedural and quality assurance requirements are given. All work instructions and Weld Procedure Specifications (WPSs) used during welding shall satisfy the requirements of this process specification and it’s applicable documents.
Ident. Num:
PRC-0010
Rev. Num:
C
PRC-0010 (REV. C), PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF STEEL AND NICKEL ALLOY HARDWARE (FEB 2006)., This process specification provides the minimum requirements that govern the automatic and machine arc welding of steel and nickel alloy hardware. Procedural and quality assurance requirements are given. All Detailed Process Instructions (DPI) and Weld Procedure Specifications (WPS) used during welding shall satisfy the requirements of this process specification and its applicable documents.
Ident. Num:
PRC-0011
Rev. Num:
A
PRC-0011(REV.A),PROCESS SPECIFICATION FOR THE SEMI-AUTOMATIC AND MACHINE STUD WELDING OF NON FLIGHT HARDWARE (JANUARY 2004)This process specification provides the requirements that govern the semi-automatic and machine stud welding of non flight hardware. Procedural and quality assurance requirements are given. All work instructions and Weld Procedure Specifications (WPS) used during welding shall satisfy the requirements of this process specification and its applicable documents.
Ident. Num:
PRC-0014
Rev. Num:
C
PRC-0014(REV. C), PROCESS SPECIFICATION FOR FRICTION STIR WELDING (MARCH 2007) This process specification provides the minimum requirements that govern Friction Stir Welding (FSW) of flight and non flight hardware. Procedural and quality assurance requirements are given. All work instructions and Weld Procedure Specifications (WPS) used during welding shall satisfy the requirements of this process specification and its applicable documents.
Ident. Num:
PRC-1001
Rev. Num:
D
PRC-1001 (REV. D), PROCESS SPECIFICATION FOR ADHESIVE BONDING (APRIL 2005)., This document covers the requirements for the adhesive bonding of metals, plastics, and composites in any combination.
Ident. Num:
PRC-2002
Rev. Num:
F
PRC-2002(REV.F), PROCESS SPECIFICATION FOR THE HEAT TREATMENT OF ALUMINUM ALLOYS (OCTOBER 2006)., This process specification establishes the engineering requirements for the heat treatment of aluminum alloys.
Ident. Num:
PRC-2003
Rev. Num:
F
PRC-2003(REV.F),PROCESS SPECIFICATION FOR THE HEAT TREATMENT OF NICKEL ALLOYS (OCTOBER 2006)., This process specification establishes the engineering requirements for the heat treatment of nickel and cobalt alloys.
Ident. Num:
PRC 2004
Rev. Num:
A
PRC-2004 (REV. A), PROCESS SPECIFICATION FOR ION NITRIDING (JUN 2006)., This process specification establishes the engineering requirements for producing a hard, wear-resistant ion nitrided surface on steel parts.
Ident. Num:
PRC-4001
Rev. Num:
C
PRC-4001(REV.C),PROCESS SPECIFICATION FOR THE APPLICATION OF FLUOROELASTOMERIC COATINGS (DECEMBER 2005)., This specification provides requirements for the application of fluoroelastomeric coatings on various substrates. Fluoroelastomeric coatings are typically used for the protection of flammable materials or to reduce the generation of particulates on friable materials.
Ident. Num:
PRC-4002
Rev. Num:
D
PRC-4002(REV.D), PROCESS SPECIFICATION FOR THE APPLICATION OF THERMAL AND CORROSION CONTROL PAINTS AND COATINGS (JULY 2006)., This process specification establishes the technical requirements for the application of thermal and corrosion control paints and coatings to flight hardware, ground support equipment, and models manufactured by JSC.
Ident. Num:
PRC-4003
Rev. Num:
B
PRC-4003 (REV.B), PROCESS SPECIFICATION FOR THE APPLICATION OF ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL COATINGS (DECEMBER 2005)., This specification provides requirements for the application of electromagnetic interference (EMI) control coatings on various substrates. EMI control coatings are commonly applied to electronic equipment enclosures in order to reduce their susceptibility to stray electromagnetic signals.
Ident. Num:
PRC-4004
Rev. Num:
D
PRC-4004 (REV. D), PROCESS SPECIFICATION FOR THE SEALING OF JOINTS AND FAYING SURFACES (AUG 2006)., This process specification establishes requirements for the sealing of joints and faying surfaces for the purposes of moisture exclusion, corrosion protection or the containment of gas pressure.
Ident. Num:
PRC-4005
Rev. Num:
A
PRC-4005 (REV. A), PROCESS SPECIFICATION FOR FLAME RETARDANT TREATMENT OF FABRICS AND WEBBINGS (JUL 2005)., This process specification establishes requirements for the application of flame retardant coatings to fabrics and webbings to fabrics and webbings.
Ident. Num:
PRC-5001
Rev. Num:
E
PRC-5001 (REV. E), PROCESS SPECIFICATION FOR CLEANING OF HARDWARE (JULY 2008)., This process specification establishes surface cleanliness requirements for cleaning and packaging of JSC flight hardware and ground support equipment (GSE).
Ident. Num:
PRC-5001
Rev. Num:
D
PRC-5001 (REV.D), PROCESS SPECIFICATION FOR CLEANING OF HARDWARE (JAN 2006)., This process specification establishes surface cleanliness requirements for cleaning and packaging of JSC flight hardware and ground support equipment (GSE).
Ident. Num:
PRC-5001
Rev. Num:
D
PRC-5001, REV D, PROCESS SPECIFICATION FOR CLEANING OF HARDWARE (JAN 2006)., This process specification establishes surface cleanliness requirements for cleaning and packaging of JSC flight hardware and ground support equipment (GSE).
Ident. Num:
PRC-5002
Rev. Num:
E
PRC-5002(REV. E), PROCESS SPECIFICATION FOR PASSIVATION AND PICKLING OF METALLIC MATERIALS (SEPTEMBER 2006).,
Ident. Num:
PRC-5003
Rev. Num:
C
PRC-5003 (REV. C), PROCESS SPECIFICATION FOR ELECTRODEPOSITED CHROMIUM PLATING (OCTOBER 2004)., This process specification establishes technical requirements for the application of electrodeposited chromium plating on steel, copper and copper alloys, and zinc and zinc alloys.
Ident. Num:
PRC-5004
Rev. Num:
C
PRC-5004(REV. C),PROCESS SPECIFICATION FOR ELECTRODEPOSITED NICKEL PLATING (OCTOBER 2004)., This process specification establishes technical requirements for the application of electrodeposited nickel plating on steel, copper and copper alloys, and zinc and zinc alloys.
Ident. Num:
PRC-5005
Rev. Num:
C
PRC-5005 (REV. C), PROCESS SPECIFICATION FOR THE CHEMICAL CONVERSION COATING OF ALUMINUM ALLOYS. This process specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials and the surfaces of aluminum and aluminum alloys. Conversion coatings covered by this specification are intended to provide increased corrosion resistance and/or a surface having better paint adhesion than uncoated aluminum. They are not intended to be used for decorative applications.
Ident. Num:
PRC-5005
Rev. Num:
C
PRC-5005(REV.C),PROCESS SPECIFICATION FOR THE CHEMICAL CONVERSION COATING OF ALUMINUM ALLOYS (DECEMBER 2007)., This process specification establishes technical requirements for the application of chemical conversion coatings on aluminum and aluminum alloys.
Ident. Num:
PRC-5006
Rev. Num:
C
PRC-5006(REV.C), PROCESS SPECIFICATION FOR THE ANODIZING OF ALUMINUM ALLOYS (MAY 2003)., This process specification establishes the technical requirements for anodizing aluminum alloys for use in JSC flight hardware.
Ident. Num:
PRC-5006C
Rev. Num:
C
PRC-5006C, PROCESS SPECIFICATION FOR THE ANODIZING OF ALUMINUM ALLOYS. This process specification establishes the technical requirements for anodizing aluminum alloys for use in JSC flight hardware. This process specification covers the requirements for six types and two classes of electrolytically formed anodic coatings on aluminum and aluminum alloys. It does not cover the requirements for anodic coatings with controlled optical properties for long-duration exposure to spacecraft external environments.
Ident. Num:
PRC-5007
Rev. Num:
B
PRC-5007(REV. B),PROCESS SPECIFICATION FOR ELECTROLESS NICKEL PLATING (DECEMBER 2005)., This process specification establishes requirements for electroless nickel plating in the manufacture of JSC flight hardware.
Ident. Num:
PRC-5008
Rev. Num:
A
PRC-5008(REV. A), PROCESS SPECIFICATION FOR SPECIALTY ANODIZING OF ALUMINUM ALLOYS TO CONTROL OPTICAL PROPERTIES (JUNE 2002)., This process specification establishes requirements for anodizing of aluminum alloys for JSC flight hardware, when controlled optical properties are required.
Ident. Num:
PRC-5009
Rev. Num:
A
PRC-5009(REV.A),PROCESS SPECIFICATION FOR ELECTROPOLISHING OF CORROSION- RESISTANT STEEL (MARCH 2002)., This process specification establishes the technical engineering requirements for electropolishing of corrosion-resistant stainless steel alloys. Electropolishing of aluminum, copper, or titanium alloys is not permitted. This specification is not intended to be used for electropolishing of parts with internal surfaces, such as tubing. In addition, this process specification is not intended to be used to electropolish parts with faying surfaces or deeply recessed areas where internal cathodes cannot be effectively applied.
Ident. Num:
PRC-5010
Rev. Num:
C
PRC-5010(REV. C), PROCESS SPECIFICATION FOR PICKLING, ETCHING, AND DESCALING OF METALS (FEBRUARY 2007) This document provides the standard requirements for etching, pickling, and descaling of metals by acids or alkali aqueous solutions.
Ident. Num:
PRC-5011
PRC-5011 (BASELINE), PROCESS SPECIFICATION FOR POLYTETRAFLUOROETHYLENE (PTFE) - IMPREGNATED OR CODEPOSITED SURFACE TREATMENT OF ALUMINUM ALLOYS (JAN 2007)., This process specification establishes the engineering requirements for producing a hard, PTFE-impregnated or codeposited coating on metal alloys and the properties of the coating. PTFE is commonly known as Teflon.
Ident. Num:
PRC-6001
Rev. Num:
F
PRC-6001 (REV F), PROCESS SPECIFICATION FOR THE MANUFACTURE OF COMPOSITE LAMINATE PREPREG PARTS (MAY 2007). This document provides the standard requirements for the manufacture of composite laminated parts by the lay-up of pre-impregnated (prepreg) materials.
Ident. Num:
PRC-6001
Rev. Num:
F
PRC-6001(REV.F), PROCESS SPECIFICATION FOR THE MANUFACTURE OF COMPOSITE LAMINATE PREPREG PARTS (MAY 2007)., This document provides the standard requirements for the manufacture of composite laminated parts by the lay-up of pre-impregnated (prepreg) materials.
Ident. Num:
PRC-6002
Rev. Num:
D
PRC-6002 (REV. D), PROCESS SPECIFICATION FOR THE ASSEMBLY OF COMPOSITE SANDWICH STRUCTURES. This document provides the standard requirements for the assembly of sandwich structures.
Ident. Num:
PRC-6002
Rev. Num:
D
PRC-6002 (REV.D), PROCESS SPECIFICATION FOR THE ASSEMBLY OF COMPOSITE SANDWICH STRUCTURES (MAY 2007)
Ident. Num:
PRC-6003
Rev. Num:
D
PRC-6003(REV.D),PROCESS SPECIFICATION FOR THE TRIMMING AND DRILLING OF COMPOSITES (MAY 2007)., This document provides the standard requirements for the trimming and drilling of composite parts.
Ident. Num:
PRC-6501
Rev. Num:
C
PRC-6501(REV. C), PROCESS SPECIFICATION FOR ULTRASONIC INSPECTION OF COMPOSITES (MAY 2003)., This document establishes the minimum requirements for ultrasonic inspection of laminated composites, bonded laminates, and adhesively bonded honeycomb composite structures.
Ident. Num:
PRC-6503
Rev. Num:
B
PRC-6503 (REV. B), PROCESS SPECIFICATION FOR RADIOGRAPHIC INSPECTION (FEB 2007)., This process specification establishes the minimum requirements for radiographic inspection of metallic and nonmetallic materials, components, and assemblies.
Ident. Num:
PRC-6504
Rev. Num:
C
PRC-6504 (REV.C), PROCESS SPECIFICATION FOR ULTRASONIC INSPECTION OF WROUGHT METALS (SEP 2006), This process specification establishes the minimum requirements for ultrasonic inspection of wrought metals and wrought metal components.
Ident. Num:
PRC-6505
Rev. Num:
B
PRC-6505 (REV.B), PROCESS SPECIFICATION FOR MAGNETIC PARTICLE INSPECTION (FEB 2007)., This process specification establishes the minimum requirements for magnetic particle inspection of ferromagnetic materials and components.
Ident. Num:
PRC-6509
Rev. Num:
B
PRC-6509 (REV. B), PROCESS SPECIFICATION FOR EDDY CURRENT INSPECTION (MAY 2008) This process specification establishes the minimum requirements for eddy current inspection of flat surfaces, fastener holes, threaded fasteners and seamless and welded tubular products made from nonmagnetic alloys such as aluminum and stainless steel.
Ident. Num:
PRC-8001
Rev. Num:
B
PRC-8001 (REV. B),PROCESS SPECIFICATION FOR DRY-FILM LUBRICANT APPLICATION (NOVEMBER 2002)., This process specification establishes requirements for the application of resin-bonded and sodium-silicate-bonded dry-film lubricants to metallic parts used in flight hardware manufactured by JSC.
Ident. Num:
PRC-8002
Rev. Num:
C
PRC-8002(REV.C), PROCESS SPECIFICATION FOR THE APPLICATION OF LIQUID LUBRICANTS (JANUARY 2007)., This process specification applies to the application of all types of liquid lubricants, such as oils and greases, to hardware manufactured by JSC.
Ident. Num:
PRC-9001
Rev. Num:
D
PRC-9001(REV.D), PROCESS SPECIFICATION FOR THE INSTALLATION OF SOLID AND BLIND RIVETS (FEBRUARY 2007)., This process specification establishes requirements for the installation of solid and blind rivets in flight hardware manufactured by JSC.
Ident. Num:
PRC-9002
Rev. Num:
H
PRC-9002(REV. H), PROCESS SPECIFICATION FOR PART MARKING (MAY 2007)., This process specification establishes requirements for identification marking and general marking of flight and non-flight hardware manufactured by JSC or outside vendors.
Ident. Num:
PRC-9004
Rev. Num:
C
PRC-9004(REV.C), PROCESS SPECIFICATION FOR THE INSTALLATION OF THINWALL SCREW THREAD INSERTS (FEBRUARY 2007)., This process specification establishes requirements for the installation of thinwall screw thread inserts in aluminum alloy structures.
Ident. Num:
PRC-9005
Rev. Num:
C
PRC-9005(REV. C),PROCESS SPECIFICATION FOR LOCKWIRING (JANUARY 2007)., This process specification establishes the requirements for lockwiring fasteners used in flight hardware manufactured by JSC.
Ident. Num:
PRC-9005C
Rev. Num:
C
PRC-9005C , PROCESS SPECIFICATION FOR LOCKWIRING (JAN 2007), This process specification establishes the requirements for lockwiring fasteners used in flight hardware manufactured by JSC.
Ident. Num:
PRC-9006
Rev. Num:
D
PRC-9006 (REV.D), PROCESS SPECIFICATION FOR THE INSTALLATION OF KEY-RETAINED SCREW THREAD INSERTS (FEBRUARY 2007) This process specification establishes requirements for the installation of key-retained inserts and studs.
Ident. Num:
PRC-9006
Rev. Num:
D
PRC-9006D, PROCESS SPECIFICATION FOR THE INSTALLATION OF KEY-RETAINED SCREW THREAD INSERTS (FEB 2007)., This process specification establishes requirements for the installation of key-retained inserts and studs.
Ident. Num:
PRC-9007
Rev. Num:
B
PRC-9007(REV. B), PROCESS SPECIFICATION FOR INSTALLATION OF THREADED AND COLLARED FASTENERS (FEBRUARY 2007) This process specification establishes the engineering requirements for the installation of threaded and collared fasteners, including conventional threaded fasteners, and Hi-Lok fasteners.
Ident. Num:
PRC-9008
Rev. Num:
B
PRC-9008(REV.B), PROCESS SPECIFICATION FOR THE INSTALLATION OF HELICAL COIL INSERTS (FEBRUARY 2007)., This process specification establishes the engineering requirements for the installation of helical coil inserts.
Ident. Num:
PRC-9009
Rev. Num:
B
PRC-9009 (REV. B), SURFACE DENSIFICATION OF REUSABLE SURFACE INSULATION TILES (APR 2007)., This PRC establishes the requirements for densifying the IML surfaces of existing Reusable Surface Insulation (RSI) tiles before the Strain Isolator Pad (SIP) is bonded.
Ident. Num:
PRC-9010
Rev. Num:
B
PRC-9010 (REV. B), PROCESS SPECIFICATION FOR BAKING MATERIALS TO REDUCE TOXIC OFFGASSING (JUN 2005)., This process specification defines the JSC process for baking hardware to reduce the offgassing of trace gas contaminants.
Ident. Num:
PRC-9010
Rev. Num:
B
PRC-9010B, PROCESS SPECIFICATION FOR BAKING MATERIALS TO REDUCE TOXIC OFFGASSING (JUN 2005)., This process specification defines the JSC process for baking hardware to reduce the offgassing of trace gas contaminants.
