Your free source for specifications, standards, and handbooks
MS Specs
AN340, AIR FORCE-NAVY AERONAUTICAL STANDARD NUT, PLAIN, HEXAGON, NON-STRUCTURAL, COARSE THREAD (1 NOV 1989)
AN340, AIR FORCE-NAVY AERONAUTICAL STANDARD NUT, PLAIN, HEXAGON, NON-STRUCTURAL, COARSE THREAD (1 NOV 1989).
Ident. Num:
AN340
Rev. Num:
-
AN340, AIR FORCE-NAVY AERONAUTICAL STANDARD NUT, PLAIN, HEXAGON, NON-STRUCTURAL, COARSE THREAD (1 NOV 1989).
AN345, AIR FORCE-NAVY AERONAUTICAL STANDARD NUT, PLAIN, HEXAGON, NON-STRUCTURAL, FINE THREAD (1 NOV 1989)
AN345, AIR FORCE-NAVY AERONAUTICAL STANDARD NUT, PLAIN, HEXAGON, NON-STRUCTURAL, FINE THREAD (1 NOV 1989).
Ident. Num:
AN345
Rev. Num:
-
AN345, AIR FORCE-NAVY AERONAUTICAL STANDARD NUT, PLAIN, HEXAGON, NON-STRUCTURAL, FINE THREAD (1 NOV 1989).
AN364, AIR FORCE/NAVY AERONAUTICAL STANDARD NUT-SELF LOCKING, THIN, 250 DEG. F (22 JUL 1969) (S/S BY MS21042, MS21083, OR MS21245)
AN364, AIR FORCE/NAVY AERONAUTICAL STANDARD NUT-SELF LOCKING, THIN, 250 DEG. F (22 JUL 1969) (S/S BY MS21042, MS21083, OR MS21245).
Ident. Num:
AN364
Rev. Num:
-
AN364, AIR FORCE/NAVY AERONAUTICAL STANDARD NUT-SELF LOCKING, THIN, 250 DEG. F (22 JUL 1969) (S/S BY MS21042, MS21083, OR MS21245).
AN500, MILITARY STANDARD SCREW, MACHINE, FILLISTER HEAD, COARSE THREAD (24 MAY 1967)
AN500, MILITARY STANDARD SCREW, MACHINE, FILLISTER HEAD, COARSE THREAD (24 MAY 1967).
Ident. Num:
AN500
Rev. Num:
-
AN500, MILITARY STANDARD SCREW, MACHINE, FILLISTER HEAD, COARSE THREAD (24 MAY 1967).
AN501, MILITARY STANDARD SCREW, MACHINE, FILLISTER HEAD, FINE THREAD (12 NOV 1980) (S/S BY NASM501)
AN501, MILITARY STANDARD SCREW, MACHINE, FILLISTER HEAD, FINE THREAD (12 NOV 1980) (S/S BY NASM501).
Ident. Num:
AN501
Rev. Num:
6
AN501, MILITARY STANDARD SCREW, MACHINE, FILLISTER HEAD, FINE THREAD (12 NOV 1980) (S/S BY NASM501).
AN508, REV. A, AIR FORCE-NAVY AERONAUTICAL STANDARD,SCREW, ROUND HEAD MACHINE, (FOR ELECTRICAL USE) (23 MAR 1984)
AN508, REV. A, AIR FORCE-NAVY AERONAUTICAL STANDARD,SCREW, ROUND HEAD MACHINE, (FOR ELECTRICAL USE) (23 MAR 1984).
Ident. Num:
AN508
Rev. Num:
A
AN508, REV. A, AIR FORCE-NAVY AERONAUTICAL STANDARD,SCREW, ROUND HEAD MACHINE, (FOR ELECTRICAL USE) (23 MAR 1984).
AN530, MILITARY STANDARD SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, ROUND HEAD, SPACED THD (17 FEB 1959) (S/S BY MS51861)
AN530, MILITARY STANDARD SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, ROUND HEAD, SPACED THD (17 FEB 1959) (S/S BY MS51861).
Ident. Num:
AN530
Rev. Num:
6
AN530, MILITARY STANDARD SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, ROUND HEAD, SPACED THD (17 FEB 1959) (S/S BY MS51861).
AN565, MILITARY STANDARD SETSCREW-HEXAGON AND FLUTED SOCKET, HEADLESS (13 MAR 1996) (S/S BY NASM565)
AN565, AIR FORCE - NAVY AERONAUTICAL STANDARD SETSCREW-HEXAGON AND FLUTED SOCKET, HEADLESS (13 MAR 1996) (S/S BY NASM565).
Ident. Num:
AN565
Rev. Num:
7
AN565, AIR FORCE - NAVY AERONAUTICAL STANDARD SETSCREW-HEXAGON AND FLUTED SOCKET, HEADLESS (13 MAR 1996) (S/S BY NASM565).
AN665 AIR FORCE-NAVY AERONAUTICAL STANDARD TERMINAL-THREADED CLEVIS TYPE TIE ROD (25 MAR 1965)
AN665 (REV. 4), AIR FORCE-NAVY AERONAUTICAL STANDARD TERMINAL-THREADED CLEVIS TYPE TIE ROD (25 MAR 1965).
Ident. Num:
AN665
Rev. Num:
4
AN665 (REV. 4), AIR FORCE-NAVY AERONAUTICAL STANDARD TERMINAL-THREADED CLEVIS TYPE TIE ROD (25 MAR 1965).
AN735, AIR FORCE-NAVY AERONAUTICAL STANDARD CLAMP, LOOP TYPE BONDING (12 FEB 1987) (S/S BY SAE-AS7351)
AN735, AIR FORCE-NAVY AERONAUTICAL STANDARD CLAMP, LOOP TYPE BONDING (12 FEB 1987) (S/S BY SAE-AS7351).
Ident. Num:
AN735
Rev. Num:
-
AN735, AIR FORCE-NAVY AERONAUTICAL STANDARD CLAMP, LOOP TYPE BONDING (12 FEB 1987) (S/S BY SAE-AS7351).
AN818 (REV 19), AIR FORCE-NAVY AERONAUTICAL STANDARD NUT, TUBE COUPLING, SHORT (15 JUN 1994)
AN818 (REV 19), AIR FORCE-NAVY AERONAUTICAL STANDARD NUT, TUBE COUPLING, SHORT (15 JUN 1994).
Ident. Num:
AN818
Rev. Num:
19
AN818 (REV 19), AIR FORCE-NAVY AERONAUTICAL STANDARD NUT, TUBE COUPLING, SHORT (15 JUN 1994).
AN936, AIR FORCE-NAVY AERONAUTICAL STANDARD WASHER, TOOTH LOCK (28 SEPT 1970)
AN936, AIR FORCE-NAVY AERONAUTICAL STANDARD WASHER, TOOTH LOCK (28 SEPT 1970).
Ident. Num:
AN936
Rev. Num:
7
AN936, AIR FORCE-NAVY AERONAUTICAL STANDARD WASHER, TOOTH LOCK (28 SEPT 1970).
AN960, AIR FORCE-NAVY AERONAUTICAL STANDARD, WASHER FLAT (6 AUG 1992)
AN960, AIR FORCE-NAVY AERONAUTICAL STANDARD, WASHER FLAT (6 AUG 1992).
Ident. Num:
AN960
Rev. Num:
21
AN960, AIR FORCE-NAVY AERONAUTICAL STANDARD, WASHER FLAT (6 AUG 1992).
AN961, AIR FORCE/NAVY AERONAUTICAL STANDARD WASHER - FLAT, ELECTRICAL (10 AUG 1967) (S/S BY NASM961)
AN961, AIR FORCE/NAVY AERONAUTICAL STANDARD WASHER - FLAT, ELECTRICAL (10 AUG 1967) (S/S BY NASM961).
Ident. Num:
AN961
Rev. Num:
2
AN961, AIR FORCE/NAVY AERONAUTICAL STANDARD WASHER - FLAT, ELECTRICAL (10 AUG 1967) (S/S BY NASM961).
AN970, AIR FORCE/NAVY AERONAUTICAL STANDARD WASHER, FLAT (4 DEC 1984) (S/S BY NASM970)
AN970, AIR FORCE/NAVY AERONAUTICAL STANDARD WASHER, FLAT (4 DEC 1984) (S/S BY NASM970).
Ident. Num:
AN970
Rev. Num:
6
AN970, AIR FORCE/NAVY AERONAUTICAL STANDARD WASHER, FLAT (4 DEC 1984) (S/S BY NASM970).
AND10133, AIR FORCE/NAVY DESIGN STANDARD, ANGLE - EQUAL LEG EXTRUDED (3 MAR 1982) (S/S BY SAE-AMS10133)
AND10133, AIR FORCE/NAVY DESIGN STANDARD, ANGLE - EQUAL LEG EXTRUDED (3 MAR 1982) (S/S BY SAE-AMS10133).
Ident. Num:
AND10133
Rev. Num:
2
AND10133, AIR FORCE/NAVY DESIGN STANDARD, ANGLE - EQUAL LEG EXTRUDED (3 MAR 1982) (S/S BY SAE-AMS10133).
BOSS, FLUID CONNECTION - INTERNAL MS33649C, BOSS, FLUID CONNECTION - INTERNAL STRAIGHT THREAD (2 AUG 1984) (S/S BY SAE-AS5202)
MS33649C, BOSS, FLUID CONNECTION - INTERNAL STRAIGHT THREAD (2 AUG 1984) (S/S BY SAE-AS5202).
Ident. Num:
MS33649
Rev. Num:
C
MS33649C, BOSS, FLUID CONNECTION - INTERNAL STRAIGHT THREAD (2 AUG 1984) (S/S BY SAE-AS5202).
MS14061B, (NOTICE 1) MILITARY SPECIFICATION SHEET PLATE, COVER, CONNECTOR
MS14061B, (NOTICE 1) MILITARY SPECIFICATION SHEET PLATE, COVER, CONNECTOR. MS14061B, dated 30 April 1979, is hereby canceled. Future acquisition for this material should refer to MIL-DTL-28754/17.
Ident. Num:
MS14061
Rev. Num:
B
MS14061B, (NOTICE 1) MILITARY SPECIFICATION SHEET PLATE, COVER, CONNECTOR. MS14061B, dated 30 April 1979, is hereby canceled. Future acquisition for this material should refer to MIL-DTL-28754/17.
MS14065B (NOTICE 1) MILITARY SPECIFICATION SHEET SCREW, FLAT HEAD
MS14065B (NOTICE 1) MILITARY SPECIFICATION SHEET SCREW, FLAT HEAD. MS14065B, dated 30 April 1979, is hereby canceled. Future acquisition for this material should refer to MIL-DTL-28754/17.
Ident. Num:
MS14065
Rev. Num:
B
MS14065B (NOTICE 1) MILITARY SPECIFICATION SHEET SCREW, FLAT HEAD. MS14065B, dated 30 April 1979, is hereby canceled. Future acquisition for this material should refer to MIL-DTL-28754/17.
MS14104J, MILITARY SPECIFICATION SHEET BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, CHAMFERED OUTER RING, -65 DEG. F TO 325 DEG
MS14104J, MILITARY SPECIFICATION SHEET BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, CHAMFERED OUTER RING, -65 DEG. F TO 325 DEG. F (5 JAN 1994 (S/S BY SAE-AS14104).
Ident. Num:
MS14104
Rev. Num:
J
MS14104J, MILITARY SPECIFICATION SHEET BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, CHAMFERED OUTER RING, -65 DEG. F TO 325 DEG. F (5 JAN 1994 (S/S BY SAE-AS14104).
MS15795G, MILITARY STANDARD WASHER, FLAT METAL, ROUND, GENERAL PURPOSE (10 JUL 1986) (S/S BY NASM15795)
MS15795G, MILITARY STANDARD WASHER, FLAT METAL, ROUND, GENERAL PURPOSE (10 JUL 1986) (S/S BY NASM15795).
Ident. Num:
MS15795
Rev. Num:
G
MS15795G, MILITARY STANDARD WASHER, FLAT METAL, ROUND, GENERAL PURPOSE (10 JUL 1986) (S/S BY NASM15795).
MS16142C, MILITARY STANDARD BOSS, GASKET SEAL STRAIGHT THREAD TUBE FITTING, STANDARD DIMENSIONS FOR (21 JUN 1979) (S/S BY SAE-J1926/1 AND ISO725)
MS16142C, MILITARY STANDARD BOSS, GASKET SEAL STRAIGHT THREAD TUBE FITTING, STANDARD DIMENSIONS FOR (21 JUN 1979) (S/S BY SAE-J1926/1 AND ISO725).
Ident. Num:
MS16142
Rev. Num:
C
MS16142C, MILITARY STANDARD BOSS, GASKET SEAL STRAIGHT THREAD TUBE FITTING, STANDARD DIMENSIONS FOR (21 JUN 1979) (S/S BY SAE-J1926/1 AND ISO725).
MS17400B, , MILITARY STANDARD INDICATOR, ATTITUDE, REMOTE - 3 INCH CASE (15 JUL 1964)
MS17400B, MILITARY STANDARD INDICATOR, ATTITUDE, REMOTE - 3 INCH CASE (15 JUL 1964).
Ident. Num:
MS17400
Rev. Num:
B
MS17400B, MILITARY STANDARD INDICATOR, ATTITUDE, REMOTE - 3 INCH CASE (15 JUL 1964).
MS17400B, MILITARY STANDARD INDICATOR, ATTITUDE, REMOTE - 3 INCH CASE (9 OCT 1996)
MS17400B, MILITARY STANDARD INDICATOR, ATTITUDE, REMOTE - 3 INCH CASE (9 OCT 1996). MS17400B(AS) is inactive for new design and is no longer used, except for replacement purposes
Ident. Num:
MS17400
Rev. Num:
B
MS17400B, MILITARY STANDARD INDICATOR, ATTITUDE, REMOTE - 3 INCH CASE (9 OCT 1996). MS17400B(AS) is inactive for new design and is no longer used, except for replacement purposes
MS17855A (NOTICE 2), MILITARY STANDARD FASTENERS, SCREW THREADED, DESCRIPTIVE FACTOR SYMBOLS AND ORDER OF NOTES FOR ENGINEERING DOCUMENTS FOR
MS17855A (NOTICE 2), MILITARY STANDARD FASTENERS, SCREW THREADED, DESCRIPTIVE FACTOR SYMBOLS AND ORDER OF NOTES FOR ENGINEERING DOCUMENTS FOR. MS17855A, dated 31 July 1989, is hereby canceled. Future design should be done in accordance with NASM17855.
Ident. Num:
MS17855
Rev. Num:
A
MS17855A (NOTICE 2), MILITARY STANDARD FASTENERS, SCREW THREADED, DESCRIPTIVE FACTOR SYMBOLS AND ORDER OF NOTES FOR ENGINEERING DOCUMENTS FOR. MS17855A, dated 31 July 1989, is hereby canceled. Future design should be done in accordance with NASM17855.
MS18150K, DETAIL SPECIFICATION SHEET SWITCH, TOGGLE, 2 CIRCUIT, SEALED TOGGLE (17 OCT 2005)
MS18150K, DETAIL SPECIFICATION SHEET SWITCH, TOGGLE, 2 CIRCUIT, SEALED TOGGLE (17 OCT 2005)., This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-83731.
Ident. Num:
MS18150
Rev. Num:
K
MS18150K, DETAIL SPECIFICATION SHEET SWITCH, TOGGLE, 2 CIRCUIT, SEALED TOGGLE (17 OCT 2005)., This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-83731.
MS20659, MILITARY STANDARD TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS I, FOR 175 DEG. C TOTAL CONDUCTOR TEMPERATURE (
MS20659, MILITARY STANDARD TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS I, FOR 175 DEG. C TOTAL CONDUCTOR TEMPERATURE (30 JUN 1995) (S/S BY SAE-AS20659).
Ident. Num:
MS20659
Rev. Num:
-
MS20659, MILITARY STANDARD TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS I, FOR 175 DEG. C TOTAL CONDUCTOR TEMPERATURE (30 JUN 1995) (S/S BY SAE-AS20659).
MS20813, CAP PNEUMATIC VALVE, HIGH PRESSURE (26 AUG 1987)
MS20813, CAP PNEUMATIC VALVE, HIGH PRESSURE (26 AUG 1987).
Ident. Num:
MS20813
Rev. Num:
-
MS20813, CAP PNEUMATIC VALVE, HIGH PRESSURE (26 AUG 1987).
MS21048, MILITARY STANDARD NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (30 SEP 1987) (S/S BY NASM21048)
MS21048, MILITARY STANDARD NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (30 SEP 1987) (S/S BY NASM21048).
Ident. Num:
MS21048
Rev. Num:
-
MS21048, MILITARY STANDARD NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (30 SEP 1987) (S/S BY NASM21048).
MS21903C, MILITARY STANDARD UNION, FLARELESS TUBE, 3/8 BULKHEAD AND UNIVERSAL (27 JUN 1969) (S/S BY SAE-AS21924)
MS21903C, MILITARY STANDARD UNION, FLARELESS TUBE, 3/8 BULKHEAD AND UNIVERSAL (27 JUN 1969) (S/S BY SAE-AS21924)
Ident. Num:
MS21903
Rev. Num:
C
MS21903C, MILITARY STANDARD UNION, FLARELESS TUBE, 3/8 BULKHEAD AND UNIVERSAL (27 JUN 1969) (S/S BY SAE-AS21924)
MS21924C, MILITARY STANDARD UNION, FLARELESS TUBE, BULKHEAD AND UNIVERSAL (15 SEP 1988) (S/S BY SAE-AS21924)
MS21924C, MILITARY STANDARD UNION, FLARELESS TUBE, BULKHEAD AND UNIVERSAL (15 SEP 1988) (S/S BY SAE-AS21924).
Ident. Num:
MS21924
Rev. Num:
C
MS21924C, MILITARY STANDARD UNION, FLARELESS TUBE, BULKHEAD AND UNIVERSAL (15 SEP 1988) (S/S BY SAE-AS21924).
MS24264P, DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES F, G AND R (6 FEB 2004)
MS24264P, DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES F, G AND R (6 FEB 2004)., The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-26500.
Ident. Num:
MS24264
Rev. Num:
P
MS24264P, DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES F, G AND R (6 FEB 2004)., The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-26500.
MS25036P, TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL MOUTHED, TYPE II, CLASS I (FOR 105 DEG. C TOTAL CONDUCTOR TEMPERATURE) (8 D
MS25036P, TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL MOUTHED, TYPE II, CLASS I (FOR 105 DEG. C TOTAL CONDUCTOR TEMPERATURE) (8 DEC 1986) (S/S BY SAE-AS25036).
Ident. Num:
MS25036P
Rev. Num:
P
MS25036P, TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL MOUTHED, TYPE II, CLASS I (FOR 105 DEG. C TOTAL CONDUCTOR TEMPERATURE) (8 DEC 1986) (S/S BY SAE-AS25036).
MS25083K, MILITARY STANDARD JUMPER ASSEMBLY, ELECTRIC, BONDING AND CURRENT RETURN (8 MAY 1980) (S/S BY MIL-C-83413/8)
MS25083K, MILITARY STANDARD JUMPER ASSEMBLY, ELECTRIC, BONDING AND CURRENT RETURN (8 MAY 1980) (S/S BY MIL-C-83413/8).
Ident. Num:
MS25083
Rev. Num:
K
MS25083K, MILITARY STANDARD JUMPER ASSEMBLY, ELECTRIC, BONDING AND CURRENT RETURN (8 MAY 1980) (S/S BY MIL-C-83413/8).
MS25487G, MILITARY STANDARD CONNECTOR, PLUG, ATTACHABLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, JET STARTING (23 MAY 1976) (S/S BY SAE-AS25487)
MS25487G, MILITARY STANDARD CONNECTOR, PLUG, ATTACHABLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, JET STARTING (23 MAY 1976) (S/S BY SAE-AS25487).
Ident. Num:
MS25487
Rev. Num:
G
MS25487G, MILITARY STANDARD CONNECTOR, PLUG, ATTACHABLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, JET STARTING (23 MAY 1976) (S/S BY SAE-AS25487).
MS27183J, MILITARY SPECIFICATION SHEET WASHER, FLAT (ROUND, STEEL, CADMIUM PLATED) GENERAL PURPOSE (11 MAR 1996)
MS27183J, MILITARY SPECIFICATION SHEET WASHER, FLAT (ROUND, STEEL, CADMIUM PLATED) GENERAL PURPOSE (11 MAR 1996).
Ident. Num:
MS27183
Rev. Num:
J
MS27183J, MILITARY SPECIFICATION SHEET WASHER, FLAT (ROUND, STEEL, CADMIUM PLATED) GENERAL PURPOSE (11 MAR 1996).
MS27190B (NOTICE 1) MILITARY STANDARD CONNECTOR, RECEPTACLE, ELECTRICAL, HIGH VOLTAGE, WATERPROOF
MS27190B (NOTICE 1) MILITARY STANDARD CONNECTOR, RECEPTACLE, ELECTRICAL, HIGH VOLTAGE, WATERPROOF. MS27190B, dated 13 March 1987, is hereby canceled without replacement.
Ident. Num:
MS27190
Rev. Num:
B
MS27190B (NOTICE 1) MILITARY STANDARD CONNECTOR, RECEPTACLE, ELECTRICAL, HIGH VOLTAGE, WATERPROOF. MS27190B, dated 13 March 1987, is hereby canceled without replacement.
MS27500F, DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, 90° ELBOW, CRIMP TYPE, BAYONET COUPLING, SERIES II (12 JULY 2002)
MS27500F, DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, 90° ELBOW, CRIMP TYPE, BAYONET COUPLING, SERIES II (12 JULY 2002)., The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-38999.
Ident. Num:
MS27500
Rev. Num:
F
MS27500F, DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, 90° ELBOW, CRIMP TYPE, BAYONET COUPLING, SERIES II (12 JULY 2002)., The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-38999.
MS27505G, DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BACK PANEL, BOX MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES I (12 J
MS27505G, DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BACK PANEL, BOX MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES I (12 JUL 2002)., The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-38999.
Ident. Num:
MS27505
Rev. Num:
G
MS27505G, DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BACK PANEL, BOX MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES I (12 JUL 2002)., The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-38999.
MS27722D, MILITARY SPECIFICATION SHEET SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS (7 MAY 2003)
MS27722D, MILITARY SPECIFICATION SHEET SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS (7 MAY 2003).
Ident. Num:
MS27722
Rev. Num:
D
MS27722D, MILITARY SPECIFICATION SHEET SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS (7 MAY 2003).
MS27723C, MILITARY STANDARD SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS (28 SEP 1987)
MS27723C, MILITARY STANDARD SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS (28 SEP 1987).
Ident. Num:
MS27723
Rev. Num:
C
MS27723C, MILITARY STANDARD SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS (28 SEP 1987).
MS27724D, MILITARY STANDARD SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS (28 SEP 1987)
MS27724D, MILITARY STANDARDSWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS (28 SEP 1987).
Ident. Num:
MS27724
Rev. Num:
D
MS27724D, MILITARY STANDARDSWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS (28 SEP 1987).
MS28884E, VALVE, FUEL CHECK, LOW PRESSURE, FLARED TUBE CONNECTION, TYPE A (10 JAN 1977
MS28884E, VALVE, FUEL CHECK, LOW PRESSURE, FLARED TUBE CONNECTION, TYPE A (10 JAN 1977).
Ident. Num:
MS28884
Rev. Num:
E
MS28884E, VALVE, FUEL CHECK, LOW PRESSURE, FLARED TUBE CONNECTION, TYPE A (10 JAN 1977).
MS29513C, MILITARY STANDARD PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RING (16 SEP 1966) (S/S BY SAE-AS29513
MS29513C, MILITARY STANDARD PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RING (16 SEP 1966) (S/S BY SAE-AS29513).
Ident. Num:
MS29513
Rev. Num:
C
MS29513C, MILITARY STANDARD PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RING (16 SEP 1966) (S/S BY SAE-AS29513).
MS3186E, DETAIL SPECIFICATION SHEET CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON
MS3186E, DETAIL SPECIFICATION SHEET CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet.
Ident. Num:
MS3186
Rev. Num:
E
MS3186E, DETAIL SPECIFICATION SHEET CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet.
MS3188B, (NOTICE 1), MILITARY SPECIFICATION SHEET BACKSHELL, 90, CABLE SEALING AND SHIELD TERMINATION CONNECTOR, ELECTRIC
MS3188B, (NOTICE 1), MILITARY SPECIFICATION SHEET BACKSHELL, 90, CABLE SEALING AND SHIELD TERMINATION CONNECTOR, ELECTRIC. MS3188B, dated 10 May 1982 is hereby canceled. Future acquisition for this material should refer to MIL-C-85049/8, /9 and /24. (Application for copies is available from the Defense Printing Service Detachment Office, Building 4D, (Customer Service), 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
Ident. Num:
MS3188
Rev. Num:
B
MS3188B, (NOTICE 1), MILITARY SPECIFICATION SHEET BACKSHELL, 90, CABLE SEALING AND SHIELD TERMINATION CONNECTOR, ELECTRIC. MS3188B, dated 10 May 1982 is hereby canceled. Future acquisition for this material should refer to MIL-C-85049/8, /9 and /24. (Application for copies is available from the Defense Printing Service Detachment Office, Building 4D, (Customer Service), 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
MS3212B (NOTICE 1), SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING
MS3212B (NOTICE 1), SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING
Ident. Num:
MS3212
Rev. Num:
B
MS3212B (NOTICE 1), SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING
MS3212B (NOTICE 2), SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING.
MS3212B (Notice 2), SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING. MB3212B, dated 23 OCTOBER 1986, is hereby canceled and superseded by NASM3212. The part identification numbers (PIN) for MS3212B and the part numbers for NASM3212 are identical. The part numbers have not been changed.
Ident. Num:
MS3212
Rev. Num:
B
MS3212B (Notice 2), SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING. MB3212B, dated 23 OCTOBER 1986, is hereby canceled and superseded by NASM3212. The part identification numbers (PIN) for MS3212B and the part numbers for NASM3212 are identical. The part numbers have not been changed.
MS3212B, SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING
MS3212B, SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING
Ident. Num:
MS3212
Rev. Num:
B
MS3212B, SCREWS, MACHINE, PAN HEAD, CROSS-RECESSED, SELF-SEALING, INTEGRAL SILICONE O-RING, PLAIN AND SELF-LOCKING
MS33537E (AMENDMENT 1), MILITARY SPECIFICATION SHEET, INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMEN
MS33537E (AMENDMENT 1), MILITARY SPECIFICATION SHEET, INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (15 NOV 1994) (S/S BY NASM33537).
Ident. Num:
MS33537
Rev. Num:
E
MS33537E (AMENDMENT 1), MILITARY SPECIFICATION SHEET, INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (15 NOV 1994) (S/S BY NASM33537).
MS33537E, MILITARY SPECIFICATION SHEET, INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (11
MS33537E, MILITARY SPECIFICATION SHEET, INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (11 JUN 1991) (S/S BY NASM33537).
Ident. Num:
MS33537
Rev. Num:
-
MS33537E, MILITARY SPECIFICATION SHEET, INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (11 JUN 1991) (S/S BY NASM33537).
MS33651B (NOTICE 1), MILITARY STANDARD BOSS AND INSTALLATIONS - AIR CONNECTION
MS33651B (NOTICE 1), MILITARY STANDARD BOSS AND INSTALLATIONS - AIR CONNECTION. This notice should be filed in front of MS33651B, dated 3 May 1985. MS33651B is inactive and is no longer to be referenced in new designs. Reference to MIL-L-4343 should be MIL-G-4343.
Ident. Num:
MS33651
Rev. Num:
B
MS33651B (NOTICE 1), MILITARY STANDARD BOSS AND INSTALLATIONS - AIR CONNECTION. This notice should be filed in front of MS33651B, dated 3 May 1985. MS33651B is inactive and is no longer to be referenced in new designs. Reference to MIL-L-4343 should be MIL-G-4343.
MS33656J, MILITARY STANDARD FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL (12 MAR 1987) (S/S BY SAE-AS4395)
MS33656J, MILITARY STANDARD FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL (12 MAR 1987) (S/S BY SAE-AS4395).
Ident. Num:
MS33656
Rev. Num:
J
MS33656J, MILITARY STANDARD FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL (12 MAR 1987) (S/S BY SAE-AS4395).
MS33657G, MILITARY STANDARD FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARED TUBE CONNECTION (10 SEP 1985) (S/S BY SAE-AS4396)
MS33657G, MILITARY STANDARD FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARED TUBE CONNECTION (10 SEP 1985) (S/S BY SAE-AS4396).
Ident. Num:
MS33657
Rev. Num:
G
MS33657G, MILITARY STANDARD FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARED TUBE CONNECTION (10 SEP 1985) (S/S BY SAE-AS4396).
MS3493B (NOTICE 2), MILITARY STANDARD CONNECTOR, PLUG AND CAP, ELECTRIC, GROUNDING.
MS3493B (NOTICE 2), MILITARY STANDARD CONNECTOR, PLUG AND CAP, ELECTRIC, GROUNDING. MS3493B, dated 23 Oct 1993, is hereby canceled and replaced by MIL-C-83413/4A.
Ident. Num:
MS3493
Rev. Num:
B
MS3493B (NOTICE 2), MILITARY STANDARD CONNECTOR, PLUG AND CAP, ELECTRIC, GROUNDING. MS3493B, dated 23 Oct 1993, is hereby canceled and replaced by MIL-C-83413/4A.
MS35335G, MS SPECIFICATION SHEET WASHER, LOCK, FLAT-EXTERNAL TOOTH (2 FEB 2004)
MS35335G, MS SPECIFICATION SHEET WASHER, LOCK, FLAT-EXTERNAL TOOTH (2 FEB 2004)., The requirements for acquiring the product described herein shall consist of this MS specification sheet and ASME B18.21.1
Ident. Num:
MS35335
Rev. Num:
G
MS35335G, MS SPECIFICATION SHEET WASHER, LOCK, FLAT-EXTERNAL TOOTH (2 FEB 2004)., The requirements for acquiring the product described herein shall consist of this MS specification sheet and ASME B18.21.1
MS51607, MILITARY STANDARD VALVE STEM, PURGING (WITH FILTER) (4 JAN 1988)
MS51607, MILITARY STANDARD VALVE STEM, PURGING (WITH FILTER) (4 JAN 1988).
Ident. Num:
MS51607
Rev. Num:
-
MS51607, MILITARY STANDARD VALVE STEM, PURGING (WITH FILTER) (4 JAN 1988).
MS90404 (NOTICE 2), MILITARY STANDARD LUG TERMINAL TYPE 1, CLASS 2
MS90404 (NOTICE 2), MILITARY STANDARD LUG TERMINAL TYPE 1, CLASS 2. MS90404, dated 06 June 1967 is hereby canceled.
Ident. Num:
MS90404
Rev. Num:
-
MS90404 (NOTICE 2), MILITARY STANDARD LUG TERMINAL TYPE 1, CLASS 2. MS90404, dated 06 June 1967 is hereby canceled.
MS9102, MILITARY STANDARD, BRACKET, ANGLE, 90 DEG. .190 X .250 BOLT (18 JUN 1987)
MS9102, MILITARY STANDARD, BRACKET, ANGLE, 90 DEG. .190 X .250 BOLT (18 JUN 1987).
Ident. Num:
MS9102
Rev. Num:
-
MS9102, MILITARY STANDARD, BRACKET, ANGLE, 90 DEG. .190 X .250 BOLT (18 JUN 1987).
MS9177 (AS), SCREW, MACHINE-CRES, DOUBLE HEXAGON, EXTENDED WASHER HEAD, .138-40
MS9177 (AS), SCREW, MACHINE-CRES, DOUBLE HEXAGON, EXTENDED WASHER HEAD, 0.138-40.
Ident. Num:
MS9177
MS9177 (AS), SCREW, MACHINE-CRES, DOUBLE HEXAGON, EXTENDED WASHER HEAD, 0.138-40.
MS9177B (NOTICE 1), MILITARY STANDARD SCREW, MACHINE - CRES, DOUBLE HEXAGON, EXTENDED WASHER HEAD, .138-40
MS9177B (NOTICE 1), MILITARY STANDARD SCREW, MACHINE - CRES, DOUBLE HEXAGON, EXTENDED WASHER HEAD, .138-40. MS9177 is inactive for new design and is no longer used except for replacement purposes.
Ident. Num:
MS9177
Rev. Num:
B
MS9177B (NOTICE 1), MILITARY STANDARD SCREW, MACHINE - CRES, DOUBLE HEXAGON, EXTENDED WASHER HEAD, .138-40. MS9177 is inactive for new design and is no longer used except for replacement purposes.
MS9194B (NOTICE 1), MILITARY STANDARD ELBOW, TUBE-AMS5646, BOSS, 90°
MS9194B (NOTICE 1), MILITARY STANDARD ELBOW, TUBE-AMS5646, BOSS, 90° This notice should be filed in front of MS9194B, dated 27 July 1967. MS9194B is inactive for new design and is no longer to be used except for replacement purposes.
Ident. Num:
MS9194
Rev. Num:
B
MS9194B (NOTICE 1), MILITARY STANDARD ELBOW, TUBE-AMS5646, BOSS, 90° This notice should be filed in front of MS9194B, dated 27 July 1967. MS9194B is inactive for new design and is no longer to be used except for replacement purposes.
MS9198, MILITARY STANDARD NUT, TUBE COUPLING, CRES AMS 5645
MS9198, MILITARY STANDARD NUT, TUBE COUPLING, CRES AMS 5645
Ident. Num:
MS9198
MS9198, MILITARY STANDARD NUT, TUBE COUPLING, CRES AMS 5645
MS9356F, MILITARY SPECIFICATION NUT, PLAIN, HEXAGON-A-286 (30 SEP 1994) (S/S BY SAE-AS9356)
MS9356F, MILITARY SPECIFICATION NUT, PLAIN, HEXAGON-A-286 (30 SEP 1994) (S/S BY SAE-AS9356).
Ident. Num:
MS9356
Rev. Num:
F
MS9356F, MILITARY SPECIFICATION NUT, PLAIN, HEXAGON-A-286 (30 SEP 1994) (S/S BY SAE-AS9356).
MS9357B, NUT, PLAIN, HEXAGON - A-286, SILVER PLATED (17 JUN 1986) (S/S BY SAE-AS9357)
MS9357B, NUT, PLAIN, HEXAGON - A-286, SILVER PLATED (17 JUN 1986) (S/S BY SAE-AS9357).
Ident. Num:
MS9357
Rev. Num:
B
MS9357B, NUT, PLAIN, HEXAGON - A-286, SILVER PLATED (17 JUN 1986) (S/S BY SAE-AS9357).
MS9490A, MILITARY STANDARD BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .250-28 UNJF-3A (S/S BY SAE-AS9490)
MS9490A, MILITARY STANDARD BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .250-28 UNJF-3A (17 NOV 1969) (S/S BY SAE-AS9490).
Ident. Num:
MS9490
Rev. Num:
A
MS9490A, MILITARY STANDARD BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .250-28 UNJF-3A (17 NOV 1969) (S/S BY SAE-AS9490).
MS9712A, MILITARY STANDARD SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL,.138-40 UNJ
MS9712A, MILITARY STANDARD SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL,.138-40 UNJF-3A (24 FEB 1986) (S/S BY SAE-AS9712).
Ident. Num:
MS9712
Rev. Num:
A
MS9712A, MILITARY STANDARD SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL,.138-40 UNJF-3A (24 FEB 1986) (S/S BY SAE-AS9712).
