Your free source for specifications, standards, and handbooks
MISC
ADF/AAP 7001.054 AIRWORTHINESS DESIGN REQUIREMENTS MANUAL (6 JUN 07)
ADF/AAP 7001.054 AIRWORTHINESS DESIGN REQUIREMENTS MANUAL (6 JUN 07). This publication provides guidance on the application of airworthiness design requirements within the Australian Defence Force (ADF) design acceptance process. It is intended for reference by project staff involved in the acquisition or modification of ADF aircraft, and engineers involved in design changes to ADF aircraft or aircraft systems. At the project manager’s discretion it may also provide useful guidance to Contractors in the establishment and completion of airworthiness certification bases.
Ident. Num:
7001.054
Rev. Num:
-
ADF/AAP 7001.054 AIRWORTHINESS DESIGN REQUIREMENTS MANUAL (6 JUN 07). This publication provides guidance on the application of airworthiness design requirements within the Australian Defence Force (ADF) design acceptance process. It is intended for reference by project staff involved in the acquisition or modification of ADF aircraft, and engineers involved in design changes to ADF aircraft or aircraft systems. At the project manager’s discretion it may also provide useful guidance to Contractors in the establishment and completion of airworthiness certification bases.
ADF/AAP 7045.002-1, ADF AIRCRAFT WIRING AND BONDING MANUAL (1 NOV 07)
ADF/AAP 7045.002-1, ADF AIRCRAFT WIRING AND BONDING MANUAL (1 NOV 07)., AUSTRALIAN DEFENCE FORCE RE-ISSUE OF AUSTRALIAN AIR PUBLICATION 7045.002-1, ADF AIRCRAFT WIRING AND BONDING MANUAL. This publication has been produced to assist personnel engaged in the installation, maintenance and repair of aircraft and ground support equipment (GSE) electrical systems.
Ident. Num:
7045.002-1
Rev. Num:
-
ADF/AAP 7045.002-1, ADF AIRCRAFT WIRING AND BONDING MANUAL (1 NOV 07)., AUSTRALIAN DEFENCE FORCE RE-ISSUE OF AUSTRALIAN AIR PUBLICATION 7045.002-1, ADF AIRCRAFT WIRING AND BONDING MANUAL. This publication has been produced to assist personnel engaged in the installation, maintenance and repair of aircraft and ground support equipment (GSE) electrical systems.
AIM-BC1, ADOPTION NOTICE (18 JUN 1997)
AIM-BC1, ADOPTION NOTICE (18 JUN 1997)., AIM-BC1, "Uniform Symbology Specification Code 39", was adopted on 18-JUN-97 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: LOGSA Packaging, Storage, and Containerization Center, Attn: AMXLS-TP-P, Hap Arnold Blvd., Tobyhanna, PA 18466-5097. Copies of this document may be purchased from the Automatic Identification Manufacturers, 634 Alpha Drive, Pittsburgh, PA 15238-2802.
Ident. Num:
AIM-BC1
Rev. Num:
-
AIM-BC1, ADOPTION NOTICE (18 JUN 1997)., AIM-BC1, "Uniform Symbology Specification Code 39", was adopted on 18-JUN-97 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: LOGSA Packaging, Storage, and Containerization Center, Attn: AMXLS-TP-P, Hap Arnold Blvd., Tobyhanna, PA 18466-5097. Copies of this document may be purchased from the Automatic Identification Manufacturers, 634 Alpha Drive, Pittsburgh, PA 15238-2802.
ASQC-Q9000.1, ADOPTION NOTICE (1 AUG 1994)
ASQC-Q9000.1 ADOPTION NOTICE (1 AUG 1994)., ASQC-Q9000.1, "Quality Management and Quality Assurance Standards--Guidelines for Selection and Use", was adopted on 01-AUG-94 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Office of the Assistant Secretary of the Air Force for Acquisition, Deputy Assistant Secretary for Science, Technology and Engineering, Systems Engineering Division, Attn: SAF/AQRE, 1060 Air Force Pentagon, Washington, DC 20330-1060. Copies of this document may be purchased from the American Society for Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203.
Ident. Num:
ASQC-Q9000.1
Rev. Num:
-
ASQC-Q9000.1 ADOPTION NOTICE (1 AUG 1994)., ASQC-Q9000.1, "Quality Management and Quality Assurance Standards--Guidelines for Selection and Use", was adopted on 01-AUG-94 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Office of the Assistant Secretary of the Air Force for Acquisition, Deputy Assistant Secretary for Science, Technology and Engineering, Systems Engineering Division, Attn: SAF/AQRE, 1060 Air Force Pentagon, Washington, DC 20330-1060. Copies of this document may be purchased from the American Society for Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203.
ASTM-D1655, ADOPTION NOTICE (3 OCT 94)
ASTM-D1655, ADOPTION NOTICE (3 OCT 94)., ASTM-D1655, "AVIATION TURBINE FUELS", was adopted on 03-OCT-94 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100. Copies of this document may be purchased from the American Society for Testing and Materials 100 Barr Harbor Drive West Conshohocken, Pennsylvania, United States, 19428-2959.
Ident. Num:
ASTM-D1655
Rev. Num:
-
ASTM-D1655, ADOPTION NOTICE (3 OCT 94)., ASTM-D1655, "AVIATION TURBINE FUELS", was adopted on 03-OCT-94 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100. Copies of this document may be purchased from the American Society for Testing and Materials 100 Barr Harbor Drive West Conshohocken, Pennsylvania, United States, 19428-2959.
DISA ACQUISITION DESKBOOK - SOURCE SELECTION (MAR 2000)
DISA ACQUISITION DESKBOOK - SOURCE SELECTION (MAR 2000)., This deskbook provides supplemental Agency procedures/guidance about the source selection process. Controlling procedures/guidance are found in the Federal Acquisition Regulation (FAR) Part 15; Defense Federal Acquisition Regulation Supplement (DFARS) Part 215 and Defense Information Systems Agency Acquisition Regulation Supplement (DARS) Part 15. For the purposes of future updates, this Deskbook is consistent with Federal Acquisition Regulation (FAR) (through Federal Acquisition Circular 97-15, effective 27 Dec 00); DFARS (through DFARS Change Notice 20000210, effective 10 Feb 00); and DARS (through DISA ACs 97-09 and 97-14). The FAR, DFARS and DARS are accessible on the D41 hompage. In the case of any conflicting guidance between these documents and this deskbook, the other documents are controlling.
Ident. Num:
No Number
Rev. Num:
-
DISA ACQUISITION DESKBOOK - SOURCE SELECTION (MAR 2000)., This deskbook provides supplemental Agency procedures/guidance about the source selection process. Controlling procedures/guidance are found in the Federal Acquisition Regulation (FAR) Part 15; Defense Federal Acquisition Regulation Supplement (DFARS) Part 215 and Defense Information Systems Agency Acquisition Regulation Supplement (DARS) Part 15. For the purposes of future updates, this Deskbook is consistent with Federal Acquisition Regulation (FAR) (through Federal Acquisition Circular 97-15, effective 27 Dec 00); DFARS (through DFARS Change Notice 20000210, effective 10 Feb 00); and DARS (through DISA ACs 97-09 and 97-14). The FAR, DFARS and DARS are accessible on the D41 hompage. In the case of any conflicting guidance between these documents and this deskbook, the other documents are controlling.
NATIONAL DEFENSE INDUSTRIAL ASSOCIATION (NDIA) PROGRAM MANAGEMENT SYSTEMS COMMITTEE (PMSC) ANSI/EIA-748-A STANDARD FOR EARNED VALUE MANAGEMENT SYSTEMS
NATIONAL DEFENSE INDUSTRIAL ASSOCIATION (NDIA) PROGRAM MANAGEMENT SYSTEMS COMMITTEE (PMSC) ANSI/EIA-748-A STANDARD FOR EARNED VALUE MANAGEMENT SYSTEMS INTENT GUIDE (JAN 2005 EDITION)., This intent guide was created by the National Defense Industrial Association (NDIA) Program Management Systems Committee (PMSC) to provide additional insight into the earned value management system (EVMS) guidelines included in Section 2 of the ANSI/EIA-748-A Standard for Earned Value Management Systems. This guide is intended for use by either the government or contractor communities whenever the use of the ANSI/EIA 748 standard is required. It is recommended for use in performing an initial compliance assessment and for performing implementation surveillance.
Ident. Num:
No Number
NATIONAL DEFENSE INDUSTRIAL ASSOCIATION (NDIA) PROGRAM MANAGEMENT SYSTEMS COMMITTEE (PMSC) ANSI/EIA-748-A STANDARD FOR EARNED VALUE MANAGEMENT SYSTEMS INTENT GUIDE (JAN 2005 EDITION)., This intent guide was created by the National Defense Industrial Association (NDIA) Program Management Systems Committee (PMSC) to provide additional insight into the earned value management system (EVMS) guidelines included in Section 2 of the ANSI/EIA-748-A Standard for Earned Value Management Systems. This guide is intended for use by either the government or contractor communities whenever the use of the ANSI/EIA 748 standard is required. It is recommended for use in performing an initial compliance assessment and for performing implementation surveillance.
