MIL-STD-2000, MILITARY STANDARD STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES

MIL-STD-2000, MILITARY STANDARD STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES. This standard establishes general requirements for materials and procedures for making soldered electrical and electronic connections. Soldered connections for leads and wires inserted in holes, surface mounted to lands, or attached to terminals shall be in accordance with this standard. In addition, component mounting requirements and acceptance criteria are provided to permit evaluation of complete assemblies. The manufacture of discrete devices, microcircuits, multichip microcircuits, and film microcircuits is outside the scope of this standard.

MIL-STD-2000A (NOTICE 1), MILITARY STANDARD STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES (NO S/S DOCUMENT)

MIL-STD-2000A (NOTICE 1), MILITARY STANDARD STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES (NO S/S DOCUMENT). MIL-STD-2000A, dated 14 February 1991, is hereby canceled without replacement. Future acquisitions shall not cite any soldering process requirements.

MIL-STD-2000A, MILITARY STANDARD STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES

MIL-STD-2000A, MILITARY STANDARD STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES. This standard establishes requirements for materials and procedures for making soldered connections in electrical and electronic assemblies. Soldered connections for leads and wires inserted in holes, surface mounted to kinds, or attached to terminals shall be in accordance with this standard. In addition, component mounting requirements and acceptance criteria are provided to permit evaluation of complete assemblies.

MIL-STD-2001, MANUALS, TECHNICAL, SYSTEMS OPERATOR'S INTERFACE PROCEDURES FOR WRITING MARKING OF ELECTRIC SYSTEMS (14 JAN 1987)

MIL-STD-2001, MANUALS, TECHNICAL, SYSTEMS OPERATOR'S INTERFACE PROCEDURES FOR WRITING MARKING OF ELECTRIC SYSTEMS (14 JAN 1987)., This standard establishes uniform style and format requirements for preparation of Systems Operator's Interface Technical Manuals.

MIL-STD-2031, DOD TEST METHOD STANDARD FIRE AND TOXICITY TEST METHODS AND QUALIFICATION PROCEDURE FOR COMPOSITE MATERIAL SYSTEMS USED IN HULL, MACHINE

MIL-STD-2031, DOD TEST METHOD STANDARD FIRE AND TOXICITY TEST METHODS AND QUALIFICATION PROCEDURE FOR COMPOSITE MATERIAL SYSTEMS USED IN HULL, MACHINERY, AND STRUCTURAL APPLICATIONS INSIDE NAVAL SUBMARINES (26 FEB 1991)., This standard provides the fire and toxicity test methods, requirements and the qualification procedure to supply NAVSEA with the information needed to certify composite material systems, proposed for use in hull, machinery and structural applications, as fit for use in the closed environment of Naval submarines. This standard is applicable to all composites, such as, metallic, ceramic, carbon, or organic matrix materials used as alternatives to conventional metals.

MIL-STD-2035A (SH) DEPARTMENT OF DEFENSE TEST METHOD NONDESTRUCTIVE TESTING ACCEPTANCE CRITERIA (15 MAY 1995)

MIL-STD-2035A (SH) DEPARTMENT OF DEFENSE TEST METHOD NONDESTRUCTIVE TESTING ACCEPTANCE CRITERIA (15 MAY 1995)., The acceptance criteria contained herein are for use in determining the acceptability of non-destructive test (NDT) discontinuities in castings, forgings, extrusions, cladding, and other products when specified by the applicable NAVSEA drawing, specification, contract, order, or directive. Acceptance criteria contained herein are based on the inspection methods performed in accordance with MIL-STD-271.

MIL-STD-2042 (SH), MILITARY STANDARD FIBER OPTIC TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS

MIL-STD-2042 (SH), MILITARY STANDARD FIBER OPTIC TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS. This standard provides detailed methods for the installation and test of fiber optic cabling and associated components on Naval surface ships and submarines.

MIL-STD-2042A (SH), MILITARY STANDARD FIBER OPTIC TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS

MIL-STD-2042A (SH), MILITARY STANDARD FIBER OPTIC TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS. This standard provides detailed methods for the installation and test of fiber optic cabling and associated components on Naval surface ships and submarines.

MIL-STD-2042B (NOTICE 1), MILITARY STANDARD FIBER OPTIC TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS

MIL-STD-2042B (NOTICE 1), MILITARY STANDARD FIBER OPTIC TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS. MIL-STD-2042B, dated 25 July 2002, has been reviewed and determined to be valid for use in acquisition.

MIL-STD-2042B (SH), MILITARY STANDARD FIBER OPTIC TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS

MIL-STD-2042B (SH), MILITARY STANDARD FIBER OPTIC TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS. This standard provides detailed methods for the installation and test of fiber optic cabling and associated components on Naval surface ships and submarines.s.

MIL-STD-2045-13501, MILITARY STANDARD INFORMATION TECHNOLOGY DOD STANDARDIZED PROFILE INTERNET ROUTING BETWEEN AUTONOMOUS SYSTEMS BORDER GATEWAY PROTO

MIL-STD-2045-13501, MILITARY STANDARD INFORMATION TECHNOLOGY DOD STANDARDIZED PROFILE INTERNET ROUTING BETWEEN AUTONOMOUS SYSTEMS BORDER GATEWAY PROTOCOL (29 JUL 1994)., This DOD Standardized Profile (DSP) 2045-13501 applies to the Border Gateway Protocol 3 (BGP-3) Standard

MIL-STD-2045-44500 (NOTICE 1), DOD INTERFACE STANDARD TACTICAL COMMUNICATIONS PROTOCOL 2 (TACO2) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

MIL-STD-2045-44500 (NOTICE 1), DOD INTERFACE STANDARD TACTICAL COMMUNICATIONS PROTOCOL 2 (TACO2) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD. THE FOLLOWING PAGES OF MIL-STD-2045-44500 HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-2045-44500 (NOTICE 2), DOD INTERFACE STANDARD TACTICAL COMMUNICATIONS PROTOCOL 2 (TACO2) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

MIL-STD-2045-44500 (NOTICE 2), DOD INTERFACE STANDARD TACTICAL COMMUNICATIONS PROTOCOL 2 (TACO2) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD. THE FOLLOWING PAGES OF MIL-STD-2045-44500 HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-2045-44500, DOD INTERFACE STANDARD TACTICAL COMMUNICATIONS PROTOCOL 2 (TACO2) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

MIL-STD-2045-44500, DOD INTERFACE STANDARD TACTICAL COMMUNICATIONS PROTOCOL 2 (TACO2) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD. This document establishes the requirements for the TActical COmmunications protocol 2 (TACO2), part of the National Imagery Transmission Format Standards (NITFS). National Imagery Transmission Format (NITF) is a standard format for transmitting digital imagery and imagery-related products among members of the Intelligence Community, and TACO2 is a protocol suite that may be used for that transmission. It includes requirements for Forward Error Correction (FEC), which is necessary to ensure interoperability and to promote commonality among subsystems that comply with NITFS.

MIL-STD-2045-47001D, DEPARTMENT OF DEFENSE INTERFACE STANDARD CONNECTIONLESS DATA TRANSFER APPLICATION LAYER STANDARD (29 SEP 2005)

MIL-STD-2045-47001D, DEPARTMENT OF DEFENSE INTERFACE STANDARD CONNECTIONLESS DATA TRANSFER APPLICATION LAYER STANDARD (29 SEP 2005)., This military standard presents the minimum essential technical parameters in the form of a mandatory system standard and optional design objectives for interoperability and compatibility among digital message transfer devices (DMTDs), between DMTDs and applicable command, control, communications, computers, and intelligence (C4I) systems and among C4I systems using digital data for information transfer over limited bandwidth communication channels.

MIL-STD-2069, REQUIREMENTS FOR AIRCRAFT NONNUCLEAR SURVIVABILITY PROGRAM (24 AUG 1961) (S/S BY MIL-HDBK-2069)

MIL-STD-2069, REQUIREMENTS FOR AIRCRAFT NONNUCLEAR SURVIVABILITY PROGRAM (24 AUG 1961) (S/S BY MIL-HDBK-2069)., The survivability of an aircraft operating in an enemy threat environment depends on its design and on the emphasis placed on its survivability throughout its life cycle. The cost of modern aircraft weapon systems, the aircraft and personnel attrition experienced in recent combat, and the resulting loss of operational capability make survivability enhancement imperative. Significant advances in technology have been, and are being made which provide the potential to increase substantially the survivability of existing and future military aircraft in the nonnuclear threat environment. To obtain the maximum payoff from these technology advances, it is essential that the survivability design discipline be effectively implemented throughout the life cycle of the aircraft weapon system. This standard was prepared in recognition of the need for a standardized systems approach to improving the survivability of military aircraft. The standard provides the requirements and guidelines necessary for the establishment and conduct of aircraft survivability programs while maintaining the flexibility required by system acquisition program managers in the development of a survivability program compatible with the needs of the procuring service and the scope of the system acquisition program.

MIL-STD-2072 (AS), MILITARY STANDARD SURVIVABILITY, AIRCRAFT, ESTABLISHMENT AND CONDUCT OF PROGRAMS FOR (25 AUG 1977)

MIL-STD-2072 (AS), MILITARY STANDARD SURVIVABILITY, AIRCRAFT, ESTABLISHMENT AND CONDUCT OF PROGRAMS FOR (25 AUG 1977)., This standard provides (a) uniform requirements and criteria for establishing and conducting aircraft survivability programs and provides guidelines for preparing survivability program plans. (b_ directions and requirements for management organization, plans, procedures, and reviews for the defined survivability tasks. (c) requirements for program tasks e.g., analyses, assessments, and studies. (d) requirements for survivability enhancement. (e) requirements for verification and demonstration.

MIL-STD-2072 (NOTICE 1), MILITARY STANDARD SURVIVABILITY, AIRCRAFT, ESTABLISHMENT AND CONDUCT OF PROGRAMS FOR (5 DEC 1995)

MIL-STD-2072 (NOTICE 1), MILITARY STANDARD SURVIVABILITY, AIRCRAFT, ESTABLISHMENT AND CONDUCT OF PROGRAMS FOR (5 DEC 1995). MIL-STD-2072 dated 25 August 1977, is hereby canceled without replacement.

MIL-STD-2073-1D (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE FOR MILITARY PACKAGING (10 MAY 2002)

MIL-STD-2073-1D (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE FOR MILITARY PACKAGING (10 MAY 2002)., THE FOLLOWING PAGES OF MIL-STD-2073-1D HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-2073-1D, STANDARD PRACTICE FOR MILITARY PACKAGING (15 DEC 1999)

MIL-STD-2073-1D, STANDARD PRACTICE FOR MILITARY PACKAGING (15 DEC 1999). This document outlines standard processes for the development and documentation of military packaging, as distinct from commercial packaging. This standard covers methods of preservation to protect materiel against environmentally induced corrosion and deterioration, physical and mechanical damage, and other forms of degradation during storage, multiple handling, and shipment associated with the military distribution system. A decision chart is included for developing these packaging requirements.

MIL-STD-2074 (AS), FAILURE CLASSIFICATION FOR RELIABILITY TESTING

MIL-STD-2074, FAILURE CLASSIFICATION FOR RELIABILITY TESTING. This standard establishes criteria for classification of failures occurring during reliability tests.

MIL-STD-2077B. MILITARY STANDARD GENERAL REQUIREMENTS TEST SETS

MIL-STD-2077B. MILITARY STANDARD GENERAL REQUIREMENTS TEST SETS. This standard contains requirements to achieve cost effective acquisition and life cycle maintenance of Operational Test Program Sets/Test Program Sets.

MIL-STD-2078, REQUIREMENT FOR PREPARATION OF SUPPORT EQUIPMENT DEPOT LEVEL REWORK STANDARDS (14 DEC 1981)

MIL-STD-2078, REQUIREMENT FOR PREPARATION OF SUPPORT EQUIPMENT DEPOT LEVEL REWORK STANDARDS (14 DEC 1981)., This standard establishes the requirements for format and provides instruction for the preparation of Support Equipment (SE) depot level rework standards.

MIL-STD-2100, MILITARY STANDARD PROPELLANT, SOLID, CHARACTERIZATION OF (EXCEPT GUN PROPELLANT) (30 MAR 1979)

MIL-STD-2100, MILITARY STANDARD PROPELLANT, SOLID, CHARACTERIZATION OF (EXCEPT GUN PROPELLANT) (30 MAR 1979)., The purpose of this standard is to provide a compendium of standardized methods to determine the intrinsic physical, chemical and interface properties of a solid propellant or propellants proposed for use in tactical rockets, missiles, aircrew escape systems, or auxiliary devices.

MIL-STD-2101, MILITARY STANDARD CLASSIFICATION OF CHARACTERISTICS (10 MAY 1979)

MIL-STD-2101, MILITARY STANDARD CLASSIFICATION OF CHARACTERISTICS (10 MAY 1979)., The purpose of this document is to establish requirements and procedures for selecting, identifying and classifying essential design characteristics required for government acceptance of products.

MIL-STD-2105C, DEPARTMENT OF DEFENSE TEST METHOD STANDARD HAZARD ASSESSMENT TESTS FOR NON-NUCLEAR MUNITIONS (14 JULY 2003)

MIL-STD-2105C, DEPARTMENT OF DEFENSE TEST METHOD STANDARD HAZARD ASSESSMENT TESTS FOR NON-NUCLEAR MUNITIONS (14 JULY 2003)., This standard provides or references tests and test procedures for the assessment of safety and insensitive munitions (IM) characteristics for all non-nuclear munitions, munition subsystems and explosive devices. The purpose is to provide a framework for the development of a consolidated safety and IM assessment test program for non-nuclear munitions. The tests are to characterize the munitions and provide the service review organization information with which to make a decision. This standard applies to all non-nuclear munitions (i.e., all-up missiles, rockets, pyrotechnics), and munitions subsystems (e.g., warheads, fuzes, cartridge actuated devices, propulsion units, safe and arm devices, pyrotechnic devices, chemical payloads), and other explosive devices. In all likelihood, it may not be possible to test against all threats. In this case, select the most probable, credible stimuli that is expected to cause the greatest damage to life, property, or combat effectiveness.

MIL-STD-2113A (NOTICE 1), MILITARY STANDARD RADIO FREQUENCY CIRCULATORS AND ISOLATORS, SELECTION OF

MIL-STD-2113A (NOTICE 1), MILITARY STANDARD RADIO FREQUENCY CIRCULATORS AND ISOLATORS, SELECTION OF. MIL-STD-2113A, dated 18 September 1989, is hereby canceled without replacement.

MIL-STD-2115 (NOTICE 1), MILITARY SPECIFICATION AUDIO DEVICES AND COMPONENTS, SELECTION AND USE OF

MIL-STD-2115 (NOTICE 1), MILITARY SPECIFICATION AUDIO DEVICES AND COMPONENTS, SELECTION AND USE OF. This notice should be filed in front of MIL-STD-2115, dated 25 September 1974. MIL-STD-2115, dated 25 September 1974, is hereby canceled without replacement.

MIL-STD-2118 (NOTICE 2), MILITARY STANDARD FLEXIBLE AND RIGID-FLEX PRINTED–WIRING FOR ELECTRONIC EQUIPMENT, DESIGN RQMTS FOR (S/S BY IPC2221 AND IPC2)

MIL-STD-2118 (NOTICE 2), MILITARY STANDARD FLEXIBLE AND RIGID–FLEX PRINTED–WIRING FOR ELECTRONIC EQUIPMENT, DESIGN REQUIREMENTS FOR. MIL–STD–2118, dated 4 May 1984, is hereby canceled. Future acquisitions should refer to IPC-2223, “Sectional Design Standard for Flexible Printed Boards” and IPC–2221 “Generic Standard on Printed Board Design.

MIL-STD-2119A, DEPARTMENT OF DEFENSE DESIGN CRITERIA DESIGN REQUIREMENTS FOR PRINTED-WIRING ELECTRICAL BACKPLANE ASSEMBLIES (19 FEB 1990)

MIL-STD-2119A, DEPARTMENT OF DEFENSE DESIGN CRITERIA DESIGN REQUIREMENTS FOR PRINTED-WIRING ELECTRICAL BACKPLANE ASSEMBLIES (19 FEB 1990)., This standard establishes design requirements governing printed-wiring electrical backplane assemblies consisting of rigid printed-wiring boards in accordance with MIL-P-55110 on which separately manufactured connector component parts qualified in accordance with MIL-C-28859 have been added. The design criteria (such as printed-wiring board thickness) contained in this standard are predicated on the requirement that end item assemblies are conformal coated or solder masked.

MIL-STD-2138A, MILITARY STANDARD, METAL SPRAYED COATINGS FOR CORROSION PROTECTION ABOARD NAVAL SHIPS (13 MAY 1992)

MIL-STD-2138A, MILITARY STANDARD, METAL SPRAYED COATINGS FOR CORROSION PROTECTION ABOARD NAVAL SHIPS (13 MAY 1992)., This standard covers the requirements for the use of metal sprayed coatings (aluminum) for corrosion control applications on board Naval ships.

MIL-STD-2154 (NOTICE 1), INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR (15 NOV 2004) [S/S by SAE-AMS-STD-2154 OR ASTM-E2375]

MIL-STD-2154 (NOTICE 1), INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR (15 NOV 2004) [S/S by SAE-AMS-STD-2154 OR ASTM-E2375]. MIL-STD-2154, dated 30 September 1982, is hereby canceled. Future acquisition for this item may refer to Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS), SAE-AMS-STD-2154, “Inspection, Ultrasonic, Wrought Metals, Process For,”

MIL-STD-2154 (NOTICE 2), INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR (12 MAY 2008) [S/S by SAE-AMS-STD-2154 OR ASTM-E2375]

MIL-STD-2154 (NOTICE 2), INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR (12 MAY 2008) [S/S by SAE-AMS-STD-2154 OR ASTM-E2375]. MIL-STD-2154, dated 30 September 1982, is hereby canceled. Future acquisition for this item may refer to ASTM International Specification ASTM E2375 “Standard Practice for Ultrasonic Testing of Wrought Products.”

MIL-STD-2154, INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR (30 SEP 1982) [S/S by SAE-AMS-STD-2154 OR ASTM-E2375]

MIL-STD-2154, INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR (30 SEP 1982) [S/S by SAE-AMS-STD-2154 OR ASTM-E2375]. The purpose of the military standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

MIL-STD-2155 (AS), FAILURE REPORTING, ANALYSIS AND CORRECTIVE ACTION SYSTEM (FRACAS) (24 JUL 1985)

MIL-STD-2155 (AS), FAILURE REPORTING, ANALYSIS AND CORRECTIVE ACTION SYSTEM (FRACAS) (24 JUL 1985). This standard establishes uniform requirements and criteria for a Failure Reporting,porting, A Analysis, and Corrective Action System to implement the FRACAS requirement of MIL-STD-785.

MIL-STD-2161A (AS), DEPARTMENT OF DEFENSE STANDARD PRACTICE PAINT SCHEMES AND EXTERIOR MARKINGS FOR US NAVY AND MARINE CORPS AIRCRAFT (1 MAY 1993)

MIL-STD-2161A (AS), DEPARTMENT OF DEFENSE STANDARD PRACTICE PAINT SCHEMES AND EXTERIOR MARKINGS FOR US NAVY AND MARINE CORPS AIRCRAFT (1 MAY 1993)., This military standard establishes the requirements for paint schemes and markings to be applied to the exterior surfaces of U.S. Navy and Marine Corps aircraft, including those procured for other government agencies and foreign countries under Navy contracts. The requirements for paint scheme and markings include size, color, and approximate locations, where applicable, as shown in illustrations. This standard also provides a mechanism to obtain approval for deviation from these requirements. The purpose of this document is to standardize paint schemes and application of naval insignia and markings. In addition, this standard provides procedures to obtain approval for deviations from these requirements.

MIL-STD-2162 (NOTICE 1), AMPLIFIER, RADIOFREQUENCY & MICROWAVE, SOLID STATE SELECTION OF (NO S/S DOCUMENT)

MIL-STD-2162 (NOTICE 1), AMPLIFIER, RADIOFREQUENCY and MICROWAVE, SOLID STATE SELECTION OF (NO S/S DOCUMENT). MIL-STD-2162, dated 27 July 1983, is hereby canceled without replacement.

MIL-STD-2163 (NOTICE 1), MILITARY STANDARD INSERT ARRANGEMENTS FOR MIL-C-28876 CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE

MIL-STD-2163 (NOTICE 1), MILITARY STANDARD INSERT ARRANGEMENTS FOR MIL-C-28876 CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINAL. MIL-STD-2163C, dated 16 February 1993, is hereby canceled. Future acquisitions for this item may refer to Appendix B of MIL-PRF-28876E.

MIL-STD-2164 (EC), Environmental Stress Screening Process for Electronic Equipment

Environmental Stress Screening Process for Electronic Equipment. This standard defines the requirements for ESS of electronic equipment, including environmental test conditions, durations of exposure, procedures, equipment operation, actions taken upon detection of defects, and test documentation.

MIL-STD-2165 Testability Program for Electronic Systems and Equipments

Testability Program for Electronic Systems and Equipments. This standard provides uniform procedures and methods for establishing a testability program, for assessing testability in designs and for integration of testability into the acquisition process for electronic systems and equipments.

MIL-STD-2165, Testability Program for Electronic Systems and Equipments

MIL-STD-2165, Testability Program for Electronic Systems and Equipments. This standard prescribes a uniform approach to testability program planning, establishment of testability (including BIT) requirements, testability analysis, prediction, and evaluation, and preparation of testability documentation.

MIL-STD-2166 (NOTICE 1), MILITARY STANDARD, CONNECTIONS, ELECTRICAL COMPLIANT PIN

MIL-STD-2166 (NOTICE 1), MILITARY STANDARD, CONNECTIONS, ELECTRICAL COMPLIANT PIN. MIL-STD-2166, dated 5 December 1984, is hereby canceled without replacement.

MIL-STD-2166, MILITARY STANDARD, CONNECTIONS, ELECTRICAL COMPLIANT PIN

MIL-STD-2166, MILITARY STANDARD, CONNECTIONS, ELECTRICAL COMPLIANT PIN. This standard is intended to be used in conjunction with other connector documents to verify the suitability of the compliant pin/connector printed wiring board interface.

MIL-STD-2173 (AS), Reliability - Centered Maintenance Requirements for Naval Aircraft, Weapons Systems and Support Equipment

Reliability - Centered Maintenance Requirements for Naval Aircraft, Weapons Systems and Support Equipment. The purpose of this standard is to provide the procedures for a Reliability-Centered Maintenance analysis for Naval Aircraft, weapons systems, and support equipment.

MIL-STD-2175A, CASTINGS, CLASSIFICATION AND INSPECTION OF (25 AUG 1975) [S/S BY SAE-AMS-STD-2175]

MIL-STD-2175A, CASTINGS, CLASSIFICATION AND INSPECTION OF (25 AUG 1975) [S/S BY SAE-AMS-STD-2175]., The purpose of this military standard is to prescribe the non-destructive testing acceptance criteria for the inspection of metal castings that are classified (see 1.3) in accordance with this standard. .,

MIL-STD-2177, MILITARY STANDARD DEPOT REWORK SPECIFICATION, AIR-LAUNCHED WEAPONS, ARMAMENT, ORDNANCE, MISSILE LAUNCHERS, & PECULIAR SUPPORT EQUIPMENT,

MIL-STD-2177, MILITARY STANDARD DEPOT REWORK SPECIFICATION, AIR-LAUNCHED WEAPONS, ARMAMENT, ORDNANCE, MISSILE LAUNCHERS, & PECULIAR SUPPORT EQUIPMENT, PREPARATION OF (7 FEB 1989)., This standard establishes the format, contents, and procedures for the preparation of depot rework specifications for air-launched weapons, armament, ordnance, PSE, and missile launchers.

MIL-STD-2191 (SH), DEPARTMENT OF DEFENSE STANDARD PRACTICE REPAIR WELDING, WELD CLADDING, STRAIGHTENING, AND COLD ROLLING OR MAIN PROPULSION SHAFTING (5 NOV 1992) [SUPERSEDING NAVSEA 0900-LP-014-1010]

MIL-STD-2191 (SH), DEPARTMENT OF DEFENSE STANDARD PRACTICE REPAIR WELDING, WELD CLADDING, STRAIGHTENING, AND COLD ROLLING OR MAIN PROPULSION SHAFTING (5 NOV 1992) [SUPERSEDING NAVSEA 0900-LP-014-1010]., This standard contains minimum requirements for weld cladding, repair welding, mechanical straightening, and cold rolling of new and refurbished main propulsion shafting and for repair welding of rudder stocks for ships of the U.S. Navy.

MIL-STD-2199 (SH), MILITARY STANDARD GLASS REINFORCED PLASTIC COVERINGS FOR PROPELLER SHAFTING (METRIC)

MIL-STD-2199 (SH), MILITARY STANDARD GLASS REINFORCED PLASTIC COVERINGS FOR PROPELLER SHAFTING (METRIC). This standard defines requirements for the materials to be used and provides detailed instructions for guidance on surface preparation, resin preparation, and application of fiberglass reinforced plastic coverings on waterborne propulsion shafting.

MIL-STD-2202A, MILITARY STANDARD ENERGY MONITORING AND CONTROL SYSTEMS, FACTORY TESTS

MIL-STD-2202A, MILITARY STANDARD ENERGY MONITORING AND CONTROL SYSTEMS, FACTORY TESTS. The purpose of this Military Standard is to define generic Factory Tests for Energy Monitoring and Control Systems (EMCS), Utility Monitor and Control Systems (UMCS) and Utility Control Systems (UCS). These tests are to be used to assure that the physical and functional requirements of the guide specifications are tested, and that the test results are adequately documented. The Government will base certain contractual decisions on the results of these tests. The EMCS, UMCS or UCS systems will typically have different names for the various devices used. For example, computer based devices used in the field are referred to as FIDs, smart field panels, RTUs, RCUs, or other names. Regardless of what the devices are named, the appropriate tests should be performed.

MIL-STD-2203A, MILITARY STANDARD ENERGY MONITORING AND CONTROL SYSTEMS, PERFORMANCE VERIFICATION AND ENDURANCE TEST (10 JUN 1994)

MIL-STD-2203A, MILITARY STANDARD ENERGY MONITORING AND CONTROL SYSTEMS, PERFORMANCE VERIFICATION AND ENDURANCE TEST (10 JUN 1994)., The purpose of this Military Standard is to define generic Performance Verification and Endurance Tests for Energy Monitoring and Control Systems (EMCS), Utility Monitor and Control Systems (UMCS) and Utility Control Systems (UCS). These tests are to be used to assure that the physical and performance requirements of guide specifications for EMCS are tested, and that the test results are adequately documented. The Government shall base certain contractual decisions on the results of these tests. The EMCS, UMCS or UCS systems will typically have different names for the various devices used. For example, computer based devices used in the field are referred to as FIDs, smart field panels, RTUs, RCUs, or other names. Regardless of what the devices are named, the appropriate tests should be performed.

MIL-STD-2204 (NOTICE 1), MILITARY STANDARD SURVIVABLE ADAPTABLE FIBER OPTIC EMBEDDED NETWORK (SAFENET) (4 MAY 1998)

MIL-STD-2204 (NOTICE 1), MILITARY STANDARD SURVIVABLE ADAPTABLE FIBER OPTIC EMBEDDED NETWORK (SAFENET) (4 MAY 1998)., MIL-STD-2204, dated 31 October 1992, is hereby canceled without replacement.

MIL-STD-2204, MILITARY STANDARD SURVIVABLE ADAPTABLE FIBER OPTIC EMBEDDED NETWORK (SAFENET) (31 OCT 1992)

MIL-STD-2204, MILITARY STANDARD SURVIVABLE ADAPTABLE FIBER OPTIC EMBEDDED NETWORK (SAFENET) (31 OCT 1992)., This standard establishes requirements for the implementation of a Survivable Adaptable Fiber Optic Embedded Network, SAFENET.

MIL-STD-2219 (NOTICE 1), MILITARY STANDARD FUSION WELDING FOR AEROSPACE APPLICATIONS

MIL-STD-2219 (NOTICE 1), MILITARY STANDARD FUSION WELDING FOR AEROSPACE APPLICATIONS. MIL-STD-2219, dated 30 December 1988, is hereby cancelled. Future acquisition for this item should refer to SAE-AMS-STD-2219, "Fusion Welding for Aerospace Applications."

MIL-STD-2219 (NOTICE 2), DOD MILITARY STANDARD FUSION WELDING FOR AEROSPACE APPLICATIONS

MIL-STD-2219 (NOTICE 2), DOD MILITARY STANDARD FUSION WELDING FOR AEROSPACE APPLICATIONS. MIL-STD-2219, dated 30 December 1988, is hereby reinstated and may be used for acquisition.

MIL-STD-2219, MILITARY STANDARD FUSION WELDING FOR AEROSPACE APPLICATIONS

MIL-STD-2219, MILITARY STANDARD FUSION WELDING FOR AEROSPACE APPLICATIONS. The scope of this document is to provide minimum requirements for weld filler materials, workmanship, inspection and record requirements for fusion welding of alloys applicable to aircraft, missiles, other aerospace equipment, their parts and accessories.

MIL-STD-2219A, MILITARY STANDARD FUSION WELDING FOR AEROSPACE APPLICATIONS

MIL-STD-2219A, MILITARY STANDARD FUSION WELDING FOR AEROSPACE APPLICATIONS. The scope of this document is to provide minimum requirements for weld filler materials, workmanship, inspection and record requirements for fusion welding of alloys applicable to aircraft, missiles, other aerospace equipment, their parts and accessories.

MIL-STD-2361 (SC), DEPARTMENT OF DEFENSE INTERFACE STANDARD DIGITAL PUBLICATIONS DEVELOPMENT

MIL-STD-2361 (SC), DEPARTMENT OF DEFENSE INTERFACE STANDARD DIGITAL PUBLICATIONS DEVELOPMENT. This standard establishes the Army Standard Generalized Markup Language (SGML) requirementsfor digital development, acquisition, and delivery of Army administrative, training and doctrine, and technical equipment publications. The requirements for technical equipment publications include the development, acquisition, and delivery requirements for Electronic and Interactive Electronic Technical Manuals (ETM/ IETM) when used in conjunction with MIL-M-87268 and MIL-D-87269. Designated appendicies of this standard contain references to, and access instructions for, the modular SGML Document Type Definitions (DTD) and Tag Description Lists for the development of Army publications in conjunction with the respective functional requirements documents. Data prepared in conformance to these requirements will facilitate the automated storage, retrieval, interchange, and processing of publications from heterogeneous data sources.

MIL-STD-2361A (AC), DEPARTMENT OF DEFENSE INTERFACE STANDARD DIGITAL PUBLICATIONS DEVELOPMENT (31 MAY 2000)

MIL-STD-2361A (AC), DEPARTMENT OF DEFENSE INTERFACE STANDARD DIGITAL PUBLICATIONS DEVELOPMENT (31 MAY 2000)., This standard establishes Standard Generalized Markup Language (SGML) and Extensible Markup Language (XML) requirements for digital development, acquisition, and delivery of Army administrative, training and doctrine, and technical and equipment publications. The requirements for technical and equipment publications include the development, acquisition, and delivery requirements for Electronic and Interactive Electronic Technical Manuals (ETM/IETM) when used in conjunction with MIL-PRF-87268 and MIL-PRF-87269. Designated appendices of this standard contain references to, and access instructions for, the modular SGML Document Type Definitions (DTD) and Tag Description Lists for the development of Army publications in conjunction with the respective functional requirements documents. Data prepared in conformance to these requirements will facilitate the automated storage, retrieval, interchange, and processing of publications from heterogeneous data sources.

MIL-STD-2361C, DIGITAL PUBLICATIONS DEVELOPMENT

This standard establishes the Extensible Markup Language (XML) requirements for digital development, acquisition, and delivery of Army administrative and technical and equipment publications. The requirements for technical and equipment publications include the development, acquisition, and delivery requirements for Electronic and Interactive Electronic Technical Manuals (ETM/IETM). Further, this standard establishes the Standard Generalized Markup Language (SGML) requirements for digital development, acquisition, and delivery of Army training and doctrine publications. Designated appendices of this standard contain references to, and access instructions for, the Document Type Definitions (DTD) and Tag Description Lists for the development of Army publications in conjunction with the respective functional requirements documents. Data prepared in conformance to these requirements will facilitate the automated storage, retrieval, interchange, and processing of publications from heterogeneous data sources.

MIL-STD-2401, MILITARY STANDARD DOD WORLD GEODETIC SYSTEM (WGS).

MIL-STD-2401, MILITARY STANDARD DOD WORLD GEODETIC SYSTEM (WGS). This standard specifies the requirements for use of World Geodetic System 1984 (WGS 84), the defining and derived parameters for WGS 84, and methods for transforming between WGS 84 and other geodetic systems. This standard applies to all DoD systems and products which require use of a World Geodetic System. A world geodetic system is a consistent global coordinate system which allows an unambiguous representation of positional information. Navigation solutions from the NAVSTAR Global Positioning System (GPS) and the Navy Navigation Satellite System (NNSS) are referred to this system. A WGS 84 ellipsoid provides a reference surface upon which coordinates are calculated and is particularly applicable to inertial systems. A WGS 84 Earth Gravitational Model (EGM) provides necessary force models for accurate global operation of strategic weapons, navigation, and satellite systems. Many MC&G products produced by other agencies and governments (and DMA products not yet placed on WGS 84) are not referred to the WGS 84. Parameters to transform these products to WGS 84 are part of this standard.

MIL-STD-2402 (DMA), MILITARY STANDARD, MAPPING, CHARTING, AND GEODESY SYMBOLS FOR GRAPHIC PRODUCTS (21 APR 1995)

MIL-STD-2402 (DMA), MILITARY STANDARD, MAPPING, CHARTING, AND GEODESY SYMBOLS FOR GRAPHIC PRODUCTS (21 APR 1995)., This standard defines Mapping, Charting, and Geodesy (MC&G) symbology for the Defense Mapping Agency (DMA) graphic (hardcopy) products. This is one of two military standards that document symbology for DMA products. Symbology associated with DMA Vector Products (those in Vector Product Format), are found in Mil-STD-2412, Vector Product Format Symbology.

MIL-STD-2407, DEPARTMENT OF DEFENSE INTERFACE STANDARD FOR VECTOR PRODUCT FORMAT (28 JUN 1996) [SUPERSEDING MIL-STD-600006]

MIL-STD-2407, DEPARTMENT OF DEFENSE INTERFACE STANDARD FOR VECTOR PRODUCT FORMAT (28 JUN 1996) [SUPERSEDING MIL-STD-600006]., The vector product format (VPF) is a standard format, structure, and organization for large geographic databases that are based on a georelational data model and are intended for direct use. VPF is designed to be compatible with a widevariety of applications and products. VPF allows application software to read data directly from computer-readable media without prior conversion to an intermediate form. VPF uses tables and indexes that permit direct access by spatial location and thematic content and is designed to be used with any digital geographic data in vector format that can be represented using nodes, edges, and faces. VPF defines the format of data objects, and the georelational data model provides a data organization within which software can manipulate the VPF data objects. A product specification corresponding to a specific database product determines the precise contents of feature tables and their relationships in the database. In this context, each separate product or application is defined by a product specification and implemented by using VPF structures.

MIL-STD-2408, DEPARTMENT OF DEFENSE STANDARD PRACTICE MAPPING, CHARTING & GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS (21 APR 1995)

MIL-STD-2408, DEPARTMENT OF DEFENSE STANDARD PRACTICE MAPPING, CHARTING & GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS (21 APR 1995)., This Military Standard , MIL-STD-2408, is a specialized dictionary wherein physical and conceptual earth objects/entities and their descriptive characteristics/properties are defined as Mapping, Charting, and Geodesy (MC&G) features and their associated attributes.

MIL-STD-2410, MILITARY STANDARD, MAPPING, CHARTING, AND GEODESY REPRODUCTION AND PRINTING (31 JAN 1995)

MIL-STD-2410, MILITARY STANDARD, MAPPING, CHARTING, AND GEODESY REPRODUCTION AND PRINTING (31 JAN 1995)., This standard defines MC&G reproduction and printing and requirements for lithographic products produced by the Defense Mapping Agency (DMA). Included are detailed specifications for dot screens, area patterns (APs), line patterns (LPs), posicuts, and type styles.

MIL-STD-2411 (NOTICE 1), MILITARY STANDARD, RASTER PRODUCT FORMAT (17 JAN 1995)

MIL-STD-2411 (NOTICE 1), MILITARY STANDARD, RASTER PRODUCT FORMAT (17 JAN 1995).

MIL-STD-2411 (NOTICE 2), MILITARY STANDARD, RASTER PRODUCT FORMAT (16 AUG 2001)

MIL-STD-2411 (NOTICE 2), MILITARY STANDARD, RASTER PRODUCT FORMAT (16 AUG 2001).

MIL-STD-2411, MILITARY STANDARD, RASTER PRODUCT FORMAT (6 OCT 1994)

MIL-STD-2411, MILITARY STANDARD, RASTER PRODUCT FORMAT (6 OCT 1994)., The Raster Product Format (RPF) is a standard data structure for geospatial databases composed of rectangular arrays of pixel values (e.g. in digitized maps or images) in compressed or uncompressed form. RPF is intended to enable application software to use the data in RPF format on computer-readable interchange media directly without further manipulations or transformation.

MIL-STD-2411-1 (NOTICE 1), DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (16 AUG 2001)

MIL-STD-2411-1 (NOTICE 1), DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (16 AUG 2001).

MIL-STD-2411-1, DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (30 AUG 1994)

MIL-STD-2411-1, DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (30 AUG 1994)., This document is a companion document to the military standard for Raster Product Format (RPF), MIL-STD-2411. It contains all registered data values referenced in the standard.

MIL-STD-2411-2, DEPARTMENT OF DEFENSE INTERFACE STANDARD INTEGRATION OF RASTER PRODUCT FORMAT FILES INTO THE NATIONAL IMAGERY TRANSMISSION FORMAT (26 AUG 1994)

MIL-STD-2411-2, DEPARTMENT OF DEFENSE INTERFACE STANDARD INTEGRATION OF RASTER PRODUCT FORMAT FILES INTO THE NATIONAL IMAGERY TRANSMISSION FORMAT (26 AUG 1994)., The Raster Product Format (RPF) is a standard data structure for geospatial databases composed of rectangular arrays of pixel values (e.g. in digitized maps or images) in compressed or uncompressed form.

MIL-STD-2413, MILITARY STANDARD PRACTICE STANDARD PRACTICE FOR STANDARD LINEAR FORMAT (SLF) FOR DIGITAL CARTOGRAPHIC FEATURE DATA (22 OCT 1993)

MIL-STD-2413, MILITARY STANDARD PRACTICE STANDARD PRACTICE FOR STANDARD LINEAR FORMAT (SLF) FOR DIGITAL CARTOGRAPHIC FEATURE DATA (22 OCT 1993)., This document defines the Standard Linear Format (SLF) as used by the Modernization Production System (MPS) of the Defense Mapping Agency (DMA) Digital Production System (DPS).

MIL-STD-2414A, MILITARY STANDARD BAR CODING FOR GEOSPATIAL PRODUCTS (1 AUG 2002)

MIL-STD-2414A, MILITARY STANDARD BAR CODING FOR GEOSPATIAL PRODUCTS (1 AUG 2002)., This standard defines the requirements for bar coding of geospatial products.

MIL-STD-2500A (NOTICE 1) DOD INTERFACE STD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.0) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD.

MIL-STD-2500A (NOTICE 1) DOD INTERFACE STD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.0) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD. THE FOLLOWING PAGES OF MIL-STD-2500A HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-2500A, DOD INTERFACE STANDARD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.0) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

MIL-STD-2500A, DOD INTERFACE STANDARD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.0) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD. This standard establishes the requirements for the file format component of the National Imagery Transmission Format Standard (NITFS). The file format described in this document is called the National Imagery Transmission Format (NITF). The NITFS is a collection of related standards and specifications developed to provide a foundation for interoperability in the dissemination of imagery and imagery-related products among different computer systems. An overview of the component documents of the NITFS can be found in MIL-HDBK-1300A.

MIL-STD-2500B (NOTICE 1) DOD INTERFACE STD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.1) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

MIL-STD-2500B (NOTICE 1) DOD INTERFACE STD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.1) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD. THE FOLLOWING PAGES OF MIL-STD-2500B HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-2500B (NOTICE 2) DOD INTERFACE STD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.1) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

MIL-STD-2500B (NOTICE 2) DOD INTERFACE STD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.1) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD. THE FOLLOWING PAGES OF MIL-STD-2500B HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-STD-2500B, DOD INTERFACE STANDARD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.1) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

MIL-STD-2500B, DOD INTERFACE STANDARD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.1) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD. This standard establishes the requirements for the file format component of the NITFS. The file format described in this document is called the NITF. The NITFS is a collection of related standards and specifications developed to provide a foundation for interoperability in the dissemination of imagery and imagery associated data among different computer systems.

MIL-STD-2500C, DOD INTERFACE STANDARD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.1) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

MIL-STD-2500C, DOD INTERFACE STANDARD NATIONAL IMAGERY TRANSMISSION FORMAT (VERSION 2.1) FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD. This standard establishes the requirements for the file format component of the NITFS. The file format described in this document is called the NITF. The NITFS is a collection of related standards and specifications developed to provide a foundation for interoperability in the dissemination of imagery and imagery associated data among different computer systems.

MIL-STD-2525B (w/ CHANGE 2), DEPARTMENT OF DEFENSE INTERFACE STANDARD COMMON WARFIGHTING SYMBOLOGY (7 MAR 2007)

MIL-STD-2525B (w/ CHANGE 2), DEPARTMENT OF DEFENSE INTERFACE STANDARD COMMON WARFIGHTING SYMBOLOGY (7 MAR 2007)., This standard provides common warfighting symbology along with details on its display and plotting to ensure the compatibility, and to the greatest extent possible, the interoperability of DOD Command, Control, Communications, Computer, and Intelligence (C4I) systems development, operations, and training. The standard addresses the efficient transmission of symbology information within the infosphere through the use of a standard methodology for symbol hierarchy and symbol identifiers. The standard applies to both automated and hand-drawn graphic displays. These symbols are designed to enhance DOD`s joint warfighting interoperability by providing a standard set of common C4I symbols. Additional symbol sets may be provided when this document is updated.