EverySpec Logo
Your free source for specifications, standards, and handbooks

MIL-STD (0500 - 0699)

MIL-STD-636 (NOTICE 1), MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (15 AUG 1988)
Ident. Num:
MIL-STD-636  
  Rev. Num:

MIL-STD-636 (NOTICE 1), MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (15 AUG 1988).
MIL-STD-636 (NOTICE 2), MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (16 SEP 1989)
Ident. Num:
MIL-STD-636 
  Rev. Num:

MIL-STD-636 (NOTICE 2), MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (16 SEP 1989).
MIL-STD-636 (NOTICE 3), MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (5 JUN 1991)
Ident. Num:
MIL-STD-636  
  Rev. Num:

MIL-STD-636 (NOTICE 3), MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (5 JUN 1991).
MIL-STD-636 (NOTICE 4), MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (7 OCT 1996)
Ident. Num:
MIL-STD-636 
  Rev. Num:

MIL-STD-636 (NOTICE 4), MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (7 OCT 1996).
MIL-STD-636, MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (5 JUN 1958)
Ident. Num:
MIL-STD-636, 
  Rev. Num:

MIL-STD-636, MILITARY STANDARD VISUAL INSPECTION STANDARDS FOR SMALL ARMS AMMUNITION THROUGH CALIBER .50 (5 JUN 1958)., This standard provides procedures for determining and evaluating defects in small arms ammunition up to and including caliber .50, and the standard shall be used as a supplement to pertinent specifications.
MIL-STD-637A (NOTICE 1), MILITARY STANDARD MACHINE AND AUTOMATIC GUNS AND MACHINE GUN TRAINERS THROUGH 30-MM (10 DEC 1962)
Ident. Num:
MIL-STD-637 
  Rev. Num:

MIL-STD-637A (NOTICE 1), MILITARY STANDARD MACHINE AND AUTOMATIC GUNS AND MACHINE GUN TRAINERS THROUGH 30-MM (10 DEC 1962)., The following pages of Mil-Std-637A have been revised and supersede the pages listed.
MIL-STD-637A, MILITARY STANDARD MACHINE AND AUTOMATIC GUNS AND MACHINE GUN TRAINERS THROUGH 30-MM (13 FEB 1961)
Ident. Num:
MIL-STD-637 
  Rev. Num:

MIL-STD-637A, MILITARY STANDARD MACHINE AND AUTOMATIC GUNS AND MACHINE GUN TRAINERS THROUGH 30-MM (13 FEB 1961)., The purpose of this standard list guide design selection and limit procurement for stock and issue of adopted Machine and Automatic Guns and Machinegun Trainers through 30-MM in FSC 1005. Prepared by the Army Ordnance Corps in conjunction with the Department of Defense Standardization Program, it is one of a series of limitation standards which will encompass all FSC 1005 weapons, accessories, and related-equipment.
MIL-STD-642L, MILITARY STANDARD IDENTIFICATION MARKING OF COMBAT AND TACTICAL TRANSPORT VEHICLES (15 MAY 1991)
Ident. Num:
MIL-STD-642 
  Rev. Num:

MIL-STD-642L, MILITARY STANDARD IDENTIFICATION MARKING OF COMBAT AND TACTICAL TRANSPORT VEHICLES (15 MAY 1991)., This standard covers mandatory requirements for marking military tactical and tracked vehicles, self propelled guns and transport vehicles.
MIL-STD-646A, MILITARY STANDARD, ELECTRICAL CIRCUIT (WIRE MARKING) IDENTIFICATION FOR TACTICAL MILITARY VEHICLES (16 MAY 1968)
Ident. Num:
MIL-STD-646 
  Rev. Num:

MIL-STD-646A, MILITARY STANDARD, ELECTRICAL CIRCUIT (WIRE MARKING) IDENTIFICATION FOR TACTICAL MILITARY VEHICLES (16 MAY 1968)., This standard covers a method of identifying wires connecting components in electrical circuits of service vehicles based on wire end markings which identify the component and the terminal to which the wire end is connected.
MIL-STD-648D, DEPARTMENT OF DEFENSE DESIGN CRITERIA STANDARD SPECIALIZED SHIPPING CONTAINERS (10 APR 2008
Ident. Num:
MIL-STD-648 
  Rev. Num:

MIL-STD-648D, DEPARTMENT OF DEFENSE DESIGN CRITERIA STANDARD SPECIALIZED SHIPPING CONTAINERS (10 APR 2008)., This standard establishes general design guidelines and associated tests for specialized shipping containers used by the Department of Defense. Definitive requirements for specific containers will be defined by the individual specification, acquisition, or task order. This standard is intended to be used as the basic reference document in all specifications and standards prescribing performance requirements to be applied to a shipping container. Compliance with this intent is expected through normal application of the specification or standard preparation and revision processes.
MIL-STD-652C (MU), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (30 NOV 1973)
Ident. Num:
MIL-STD-652 
  Rev. Num:

MIL-STD-652D (MU), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (30 NOV 1973)., This standard covers the chemical, physical, and packing requirements for cannon propellants. The ballistic requirements for the detailed propellants are covered in their detailed specifications.
MIL-STD-652D (AR) (NOTICE 1), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (5 OCT 1979)
Ident. Num:
MIL-STD-652 
  Rev. Num:

MIL-STD-652D (AR) (NOTICE 1), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (5 OCT 1979).
MIL-STD-652D (AR) (NOTICE 3), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (27 OCT 1982)
Ident. Num:
MIL-STD-652 
  Rev. Num:

MIL-STD-652D (AR) (NOTICE 3), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (27 OCT 1982).
MIL-STD-652D (AR) (NOTICE 3), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (27 OCT 1982)
Ident. Num:
MIL-STD-652 
  Rev. Num:

MIL-STD-652D (AR) (NOTICE 2), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (13 MAR 1981).
MIL-STD-652D (AR) (NOTICE 4), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (21 NOV 1983)
Ident. Num:
MIL-STD-652 
  Rev. Num:

MIL-STD-652D (AR) (NOTICE 4), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (21 NOV 1983).
MIL-STD-652D (AR) (NOTICE 5), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (29 AUG 1984)
Ident. Num:
MIL-STD-652 
  Rev. Num:

MIL-STD-652D (AR) (NOTICE 5), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (29 AUG 1984).
MIL-STD-652D (AR) (NOTICE 6), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (28 APR 1990)
Ident. Num:
MIL-STD-652 
  Rev. Num:

MIL-STD-652D (AR) (NOTICE 6), MILITARY STANDARD PROPELLANTS, SOLID, FOR CANNONS REQUIREMENTS AND PACKING (28 APR 1990).
MIL-STD-655D, PROVISIONS FOR EVALUATING QUALITY OF CLOTH, WOOL, WORSTED AND WOOL BLENDS (6 AUG 1992)
Ident. Num:
MIL-STD-655 
  Rev. Num:

MIL-STD-655D, PROVISIONS FOR EVALUATING QUALITY OF CLOTH, WOOL, WORSTED AND WOOL BLENDS (6 AUG 1992)., The purpose of this standard is to provide standardized examination provisions for evaluating the quality of woolen, worsted, and wool blended cloths that are the basic materials for quality uniform items.
MIL-STD-656, MILITARY STANDARD PROVISIONS FOR EVALUATING QUALITY OF SLACKS, WOMEN'S (18 JUL 1990)
Ident. Num:
MIL-STD-656 
  Rev. Num:

MIL-STD-656, MILITARY STANDARD PROVISIONS FOR EVALUATING QUALITY OF SLACKS, WOMEN'S (18 JUL 1990)., This document provides a standardized procedure for evaluating the quality of women's slacks procured for the Department of Defense. It is intended to list, in a single document, defects irrespective of fabrics (i.e., cotton, wool, or synthetic) or end use.
MIL-STD-662F, MILITARY STANDARD DEPARTMENT OF DEFENSE TEST METHOD STANDARD V50 BALLISTIC TEST FOR ARMOR (18 DEC 1997)
Ident. Num:
MIL-STD-662 
  Rev. Num:

MIL-STD-662F, MILITARY STANDARD DEPARTMENT OF DEFENSE TEST METHOD STANDARD V50 BALLISTIC TEST FOR ARMOR (18 DEC 1997)., The purpose of this standard is to provide general guidelines for procedures, equipment, physical conditions, and terminology for determining the ballistic resistance of metallic, nonmetallic and composite armor against small arms projectiles. The ballistic test procedure described in this standard determines the V50 ballistic limit of armor. This test method standard is intended for use in ballistic acceptance testing of armor and for the research and development of new armor materials. This ballistic test method is applicable to the following types of armor: a. Body armor. b. Armored seats for aircraft and ground vehicles. c. Crew station armor for military aircraft. d. Internal and external armor for aircraft. e. Transparent armor, such as windows, windshields and vision blocks for aircraft and ground vehicles. f. Bulkhead armor for shipboard use. g. Structural or integral armor for use on ship exteriors. h. Armor for military tactical shelters (AFWAL-TR-82-4163). i. Visors for eye and face protection. j. Armor for potential space applications. k. Armor for light and heavy combat vehicles and structures.
MIL-STD-681D (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE (19 JUN 2000)
Ident. Num:
MIL-STD-681 
  Rev. Num:

MIL-STD-681D (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE (19 JUN 2000). The following pages of MIL-STD-681D have been revised and supersede the pages listed.
MIL-STD-681D, MILITARY STANDARD IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE (31 AUG 1990)
Ident. Num:
MIL-STD-681 
  Rev. Num:

MIL-STD-681D, MILITARY STANDARD IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE (31 AUG 1990). This standard establishes identification coding systems for all insulated hookup and lead wire used in electrical and electronic equipment by the Departments of the Army, Navy, and Air Force.
MIL-STD-683 (NOTICE 1), MILITARY STANDARD CRYSTAL UNITS (QUARTZ), CRYSTAL HOLDERS (ENCLOSURES), AND OSCILLATORS, SELECTION OF.
Ident. Num:
MIL-STD-683 
  Rev. Num:

MIL-STD-683 (NOTICE 1), MILITARY STANDARD CRYSTAL UNITS (QUARTZ), CRYSTAL HOLDERS (ENCLOSURES), AND OSCILLATORS, SELECTION OF. MIL-STD-683G, dated 23 September 1992, is hereby canceled without replacement.
MIL-STD-685 (NOTICE 1), MILITARY STANDARD IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH, AND TELETYPE SIGNALS
Ident. Num:
MIL-STD-685 

MIL-STD-685, MILITARY STANDARD IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH, AND TELETYPE SIGNALS. The following pages have been revised and supersede the pages listed.
MIL-STD-685 (NOTICE 2), MILITARY STANDARD IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH, AND TELETYPE SIGNALS
Ident. Num:
MIL-STD-685 

MIL-STD-685 (NOTICE 2), MILITARY STANDARD IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH, AND TELETYPE SIGNALS. MIL-STD-685 dated 7 December 1961, has been reviewed and determined to be valid for use in acquisition.
MIL-STD-685, MILITARY STANDARD IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH, AND TELETYPE SIGNALS
Ident. Num:
MIL-STD-685 

MIL-STD-685, MILITARY STANDARD IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH, AND TELETYPE SIGNALS. This standard establishes a uniform identification code for all wires and cables used by the Departments of the Army, Navy, and the Air Force for transmission of telephone, telegraph, and teletype signals.
MIL-STD-686C, MILITARY STANDARD CABLE AND CORD, ELECTRICAL; IDENTIFICATION MARKING AND COLOR CODING OF (28 SEP 1990
Ident. Num:
MIL-STD-686 
  Rev. Num:

MIL-STD-686C, MILITARY STANDARD CABLE AND CORD, ELECTRICAL; IDENTIFICATION MARKING AND COLOR CODING OF (28 SEP 1990). This standard establishes a uniform identification code of all electrical cables and cords used by the Departments of the Army, Navy, and Air Force,except for the following. a. High-tension and low-tension cables for vehicular use covered by MIL-C-3702and MIL-W-13486. b. Cables used for construction. c. Cables and cords for transmission of telephone,telegraph,and teletype signals covered by MIL-STD-685. d. Flexible coaxial cables.
MIL-STD-687A (NOTICE 1), MILITARY STANDARD WIRE, THERMOCOUPLE, IDENTIFICATION MARKING AND COLOR CODING OF
Ident. Num:
MIL-STD-687 
  Rev. Num:

MIL-STD-687A (NOTICE 1), MILITARY STANDARD WIRE, THERMOCOUPLE, IDENTIFICATION MARKING AND COLOR CODING OF. MIL-STD-687A, dated 10 July 1973, is hereby canceled without replacement.
MIL-STD-690C (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE FAILURE RATE SAMPLING PLANS AND PROCEDURES
Ident. Num:
MIL-STD-690 
  Rev. Num:

MIL-STD-690C (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE FAILURE RATE SAMPLING PLANS AND PROCEDURES. The following pages of MIL-STD-690C have been revised and supersede the pages listed.
MIL-STD-690C, DEPARTMENT OF DEFENSE STANDARD PRACTICE FAILURE RATE SAMPLING PLANS AND PROCEDURES
Ident. Num:
MIL-STD-690 
  Rev. Num:

MIL-STD-690C, DEPARTMENT OF DEFENSE STANDARD PRACTICE FAILURE RATE SAMPLING PLANS AND PROCEDURES. This standard provides procedures for failure rate (FR) qualification, sampling plans for establishing and maintaining FR levels at selected confidence levels, and lot conformance inspection procedures associated with FR testing for the purpose of direct reference in appropriate military electronic parts established reliability specifications.
MIL-STD-690D, DOD STANDARD PRACTICE FAILURE RATE SAMPLING PLANS AND PROCEDURES
Ident. Num:
MIL-STD-690 
  Rev. Num:

MIL-STD-690D, DEPARTMENT OF DEFENSE STANDARD PRACTICE FAILURE RATE SAMPLING PLANS AND PROCEDURES. This standard provides procedures for failure rate (FR) qualification, sampling plans for establishing FR levels at selected confidence levels, and lot conformance inspection procedures associated with FR testing for the purpose of direct reference in appropriate military electronic parts established reliability (ER) specifications. Figures and tables throughout this standard are based on exponential distribution. Weibull distribution will be acceptable in certain components such as capacitors. Use of Weibull distribution for any component must be approved by the qualifying activity. This standard also provides guidance to specification writers in the use of this standard (see appendix A) and references material for users of ER parts.
MIL-STD-698B, MILITARY STANDARD, QUALITY STANDARDS FOR AIRCRAFT PNEUMATIC TIRES AND INNER TUBES (15 JUL 1977)
Ident. Num:
MIL-STD-698 
  Rev. Num:

MIL-STD-698B, MILITARY STANDARD, QUALITY STANDARDS FOR AIRCRAFT PNEUMATIC TIRES AND INNER TUBES (15 JUL 1977)., This standard establishes the quality standards for aircraft pneumatic tires and inner tubes, and the inspection criteria for contractors snd Government quality control representatives.


EverySpec powered by Epiware document management software contact: jimkern@everyspec.com Valid HTML 4.01 Strict