MIL-W- 17122D (NOTICE 1), MILITARY SPECIFICATION, WATER SOFTENER UNIT, LIME-SODA TYPE (21 APR 1997)., Military Specification MIL-W- 17122D, dated 30 August 1991, is hereby canceled. Future Acquisition of this material should refer to Commercial Item Description A-A-50573

MIL-W-10430D, MILITARY SPECIFICATION, WELDING RODS AND ELECTRODES; PACKAGING OF (22 MAR 1994)., This specification covers the requirements for the packaging of covered and bare welding rods and electrodes as required for each level of protection (see 6.5.1)

MIL-W-12133D, MILITARY SPECIFICATION WASHER, SPRING TENSION, GENERAL SPECIFICATION FOR (17 JUN 1994).

MIL-W-13855D (AMENDMENT 2),, MILITARY SPECIFICATION WEAPONS: SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR (21 FEB 1973).

MIL-W-13855D (AR) (INTERIM AMENDMENT 4), MILITARY SPECIFICATION WEAPONS: SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR (9 OCT 1994)., This interim amendment is approved for use by the Department of the Army with Military Specification MIL-W-13855D(AR) dated 21 February 1973.

MIL-W-13855D (INTERIM AMENDMENT 4 - NOTICE 1), MILITARY SPECIFICATION WEAPONS: SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR (6 MAY 1999)., MIL-W-13855D Interim Amendment 4, dated 9 October 1984, is hereby canceled without replacement.

MIL-W-13855D,, MILITARY SPECIFICATION WEAPONS: SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR (21 FEB 1973)., This specification covers general requirements for small arms weapons and aircraft armament subsystems, attachments, accessories, equipment, and parts and assemblies thereof, as applicable.

MIL-W-16878/4C, MILITARY SPECIFICATION WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE (PTFE) INSULATED, 200 DEG. C, 600 VOLTS, EXTRUDED INSULATION (11 SEP 1992) (S/S BY NEMA-HP3).

MIL-W-17337F, MILITARY SPECIFICATION WEBBING, TEXTILE, WOVEN NYLON (11 DEC 1989)., This specification covers the requirements for woven nylon webbing, woven on shuttle or shuttleless looms.

MIL-W-21157A, MILITARY SPECIFICATION WELDMENT, STEEL, CARBON AND LOW ALLOY (YIELD STRENGTH 30,000 - 60,000 PS1 (26 OCT 1971)., This specification covers the requirements for steel weldments fabricated by metal electrode welding processes.

MIL-W-21338A, MILITARY SPECIFICATION, WASHER, KEY, RETAINING BALL AND ROLLER BEARINGS (15 JAN 1970)., This specification covers the procurement requirements for retaining key washers for use in assemblies with ball and roller bearings.

MIL-W-2196D (NAVY) (AMENDMENT 1), WATER COOLING OF SHIPBOARD ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR. Page 4 - 3.3.3, third line: Delete "2 degrees Celsius" and substitute "3 degrees Celsius".

MIL-W-2196D (NAVY), WATER COOLING OF SHIPBOARD ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR.This specification covers the general design and construction requirements and methods for the internal water cooling of electronic equipment utilizing shipboard cooling water support systems.

MIL-W-21985, MILITARY SPECIFICATION, WHEEL - CUSHION TREAD (SEMI-PNEUMATIC) FOR MOBILE GROUND SUPPORT EQUIPMENT (13 MAR 1959) [S/S BY SAE-AS21985]., This specification covers one type of cushion tread (semi-pneumatic) wheels for use on mobile ground support equipment.

MIL-W-22248A (AMENDMENT 2), MILITARY SPECIFICATION WELDMENTS, ALUMINUM AND ALUMINUM ALLOY. This amendment forms a part of Military Specification MIL-W-22248A, dated 29 September 1971, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-W-22248A, MILITARY SPECIFICATION WELDMENTS, ALUMINUM AND ALUMINUM ALLOY. This specification covers the general requirements for aluminum and aluminum alloy weldments fabricated by the inert-gas metal-arc and inert-gas tungsten-arc welding processes

MIL-W-22759E (AMENDMENT 1), MILITARY SPECIFICATION WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY (7 MAY 1991) [SUPERSEDING MIL-W-7139B] [S/S BY SAE-AS22759].

MIL-W-22759E (AMENDMENT 2), MILITARY SPECIFICATION WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY (16 OCT 1998) [SUPERSEDING MIL-W-7139B] [S/S BY SAE-AS22759].

MIL-W-22759E (SUPPLEMENT 1), MILITARY SPECIFICATION WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY (31 DEC 1990) [SUPERSEDING MIL-W-7139B] [S/S BY SAE-AS22759].

MIL-W-22759E, MILITARY SPECIFICATION WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY (31 DEC 1990) [SUPERSEDING MIL-W-7139B] [S/S BY SAE-AS22759]., This specification covers fluoropolymer-insulated single conductor electrical wires made with tin-coated, silver-coated, or nickel-coated conductors of copper or copper alloy.

MIL-W-25140B, MILITARY SPECIFICATION WEIGHT AND BALANCE CONTROL SYSTEM 9FOR AIRCRAFT AND ROTORCRAFT) (31 OCT 1977) [S/S By SAWE-RP7]., This specification covers the requirements for Weight and Balance Control Systems to provide for the management of mass characeristics program and to facilitate the preparation and submission of data in standard format during the life of an aircraft or rotorcraft contract.

MIL-W-25913, MILITARY SPECIFICATION, WAVEGUIDE, RIDGED ASSEMBLIES, FLEXIBLE AND RIGID GENERAL SPECIFICATION FOR (19 DEC 1957)., This specification is a performance type of specification for Ridged Waveguide Assemblies. These Ridged Waveguide Assemblies, rigid and flexible, shall be constructed in accordance with the mechanical and electrical requirements of the applicable drawings to insure interchangeability.

MIL-W-27000A, MILITARY SPECIFICATION, WEAPONS, NUCLEAR, PRACTICE AND TRAINING - AND SIMILAR SPECIAL WEAPONS ITEMS, GENERAL SPECIFICATION FOR (30 JUN 1965) [SUPERSEDING MIL-B-27000(USAF)]., This specification covers the requirements for processes, performance and testing. cogmon to full scale and miniature practice and training weapons add to similar items including dummy reentry vehic Le groups, dummy warheads, dumay missiles, parachute test vehicles and full scale equipment designed for like application and service conditions. Throughout the specification the term �practice weapon� includes training �weapons and similar items unless obviously not applicable.

MIL-W-27076 (NOTICE 1), MILITARY SPECIFICATION WORKMANSHIP STANDARDS FOR GROUND ELECTRONIC AND ASSOCIATED EQUIPMENT (19 JAN 1976) [S/S BY MIL-STD-454].

MIL-W-3314A, MILITARY SPECIFICATION, WIRES, IRON OR STEEL, GALVANIZED (29 MAR 1965)., This specification covers three types of galvanized iron or steel wires used for open wire lines for communication.

MIL-W-3795B (NOTICE 4), MILITARY SPECIFICATION WIRE, ELECTRICAL (TINSEL). MIL-W-3795B, dated 12 November 1968, is hereby reinstated and may be used for acquisition.

MIL-W-38387B, MILITARY SPECIFICATION WEIGHT AND BALANCE SYSTEM, AIRCRAFT, INTEGRAL A/A32H-8 (6 MAY 1976)., This specification covers a weight and balance system, designated A/A32H-8, suitable for use in Type C-130 aircraft. The system is to be mounted in the aircraft and become a part of the flight vehicle. No ground equipment nor external ground power is required to operate the system.

MIL-W-3947B (NOTICE 1), MILITARY SPECIFICATION, WEIGHT AND BALANCE CONTROL SYSTEM FOR GUIDED MISSILES AND SPACE LAUNCH VEHICLES (18 SEP 1991)., MIL-W-3947B dated 3 October 1969, has been reviewed and determined to be valid for use in acquisition.

MIL-W-3947B (NOTICE 2), MILITARY SPECIFICATION, WEIGHT AND BALANCE CONTROL SYSTEM FOR GUIDED MISSILES AND SPACE LAUNCH VEHICLES (27 NOV 1997)., MIL-W-3947B and Notice 1 are inactive for new design. Refer to the Department of Defense, Adopted, Society of Allied Weight Engineers (SAWE). Recommended Practice No. 9, “Weight and Balance Control System for Guided Missiles and Space Launch Vehicles,” for new design.

MIL-W-3947B, MILITARY SPECIFICATION, WEIGHT AND BALANCE CONTROL SYSTEM FOR GUIDED MISSILES AND SPACE LAUNCH VEHICLES (3 OCT 1969)., This specification requires the establishment of a weight and balance control system to provide for the management of mass characteristics programs and to facilitate the preparation and submission of data as specified herein. The term "Weight and Balance" as used herein is intended to include terms relating to mass and mass properties.

MIL-W-41B, MILITARY SPECIFICATION, WELDING OF ARMOR, METAL-ARC, MANUAL, WITH AUSTENITIC ELECTRODES; FOR AIRCRAFT (26 MAY 1955) [S/S BY MIL-STD-1941] [SUPERSEDES JAN-W-41A]., This specification covers the requirements for manual metal-arc welding with austenitic electrodes of built-up metal structures, hereinafter designated as weldments, constructed of face-hardened or homogeneous armor, or both, in thicknesses 1/8 to 1 1/8 inches, inclusive; and the attachment of brackets, clips, and other connecting members to armor by manual arc-welding.

MIL-W-41B (AMENDMENT 1), MILITARY SPECIFICATION, WELDING OF ARMOR, METAL-ARC, MANUAL, WITH AUSTENITIC ELECTRODES; FOR AIRCRAFT (14 NOV 1955) [S/S BY MIL-STD-1941] [SUPERSEDES JAN-W-41A].

MIL-W-41B (NOTICE 1), MILITARY SPECIFICATION, WELDING OF ARMOR, METAL-ARC, MANUAL, WITH AUSTENITIC ELECTRODES; FOR AIRCRAFT (15 MAR 1990) [S/S BY MIL-STD-1941] [SUPERSEDES JAN-W-41A].

MIL-W-45205B (NOTICE 1), MILITARY SPECIFICATION WELDING, GAS METAL-ARC AND GAS TUNGSTEN-ARC, ALUMINUM ALLOYS, READILY WELDABLE FOR STRUCTURES, EXCLUDING ARMOR (1 SEP 1988)., MIL-W-45205B(MRI, dated 6 April 1982, is hereby cancelled. Future acquisitions for this material shall refer to MIL-STD-372(MR).

MIL-W-45205B (NOTICE 2), MILITARY SPECIFICATION WELDING, GAS METAL-ARC AND GAS TUNGSTEN-ARC, ALUMINUM ALLOYS, READILY WELDABLE FOR STRUCTURES, EXCLUDING ARMOR (8 OCT 2004).

MIL-W-45205B, MILITARY SPECIFICATION WELDING, GAS METAL-ARC AND GAS TUNGSTEN-ARC, ALUMINUM ALLOYS, READILY WELDABLE FOR STRUCTURES, EXCLUDING ARMOR (6 APR 1982)., This specification covers the welding of aluminum alloys for structural applications other than armor by the gas metal-arc or gas tungsten-arc welding process.

MIL-W-45205B (AMENDMENT 1), MILITARY SPECIFICATION WELDING, GAS METAL-ARC AND GAS TUNGSTEN-ARC, ALUMINUM ALLOYS, READILY WELDABLE FOR STRUCTURES, EXCLUDING ARMOR (9 SEP 1985).

MIL-W-45595D, MILITARY SPECIFICATION, WASHERS, SHOULDERED, RECESSED, SADDLE, CONCAVE AND CONVEX (16 AUG 1985) [S/S BY NASM45595]., This specification covers washers; Shouldered, Recessed, Saddle, Concave, and Convex.

MIL-W-46132 (AMENDMENT 1), MILITARY SPECIFICATION, WELDING, FUSION, ELECTRON BEAM, PROCESS FOR (11 MAR 1970) [S/S BY SAE-AMS2680 AND SAE-AMS2681].

MIL-W-46132, MILITARY SPECIFICATION, WELDING, FUSION, ELECTRON BEAM, PROCESS FOR (11 MAR 1970) [S/S BY SAE-AMS2680 AND SAE-AMS2681]., This specification covers the requirements for the electron beam fusion welding process.

MIL-W-47091A, (NOTICE1), MILITARY SPECIFICATION WELDING, ARC AND GAS; FOR FABRICATING GROUND EQUIPMENT FOR ROCKETS AND GUIDED MISSILES (28 MAY 1996)., MIL-W-47091A (MI) is inactive for new design and is no longer used, except for replacement purposes.

MIL-W-47091A, MILITARY SPECIFICATION WELDING, ARC AND GAS; FOR FABRICATING GROUND EQUIPMENT FOR ROCKETS AND GUIDED MISSILES (30 JUN 1992)., This specification covers electric arc and gas welding of metallic members in ground handling equipment for rockets and guided missiles.

MIL-W-5013L, MILITARY SPECIFICATION WHEEL AND BRAKE ASSEMBLIES, AIRCRAFT, GENERAL SPECIFICATION FOR (31 OCT 1991)., This specification covers main and auxillary wheel and brake assemblies for all types of military aircraft.

MIL-W-5044C (AMENDMENT 1), MILITARY SPECIFICATION, WALKWAY COMPOUND, NONSLIP AND WALKWAY MATTING, NONSLIP (19 JUN 1974) [S/S BY A-A-59166 AND A-A-59124].

MIL-W-5044C (NOTICE 1), MILITARY SPECIFICATION WALKWAY COMPOUND, NONSLIP, AND WALKWAY MATING (24 MAR 1998)., MIL-W-5044C, dated 25 August 1970, is hereby canceled. Future acquisitions for this item should refer to Commercial Item Descriptions (CID) A-A-59166, Type I and II, dated 16 March 1998, �COATING COMPOUND, NONSLIP (FOR WALKWAYS)� and CID A-A-59124, Type III and IV, dated 25 September 1997 �DECK COVERING, LIGHTWEIGHT, NONSLIP�.

MIL-W-5044C, MILITARY SPECIFICATION, WALKWAY COMPOUND, NONSLIP AND WALKWAY MATTING, NONSLIP (25 AUG 1970) [S/S BY A-A-59166 AND A-A-59124]., This specification covers nonslip walkway materials.

MIL-W-5050A, MILITARY SPECIFICATION, WALKWAY, COATING AND MATTING, NONSLIP, AIRCRAFT, APPLICATION OF (ASG) (31 JAN 1958)., This specification provides instructions for the application of smooth and rough walkway coatings and walkway matting to wingwalks of aircraft.

MIL-W-5088L (AMENDMENT 1), MILITARY SPECIFICATION WIRING AEROSPACE VEHICLE (9 DEC 1992) [S/S BY SAE-AS50881]., This amendment forms a part of MIL-W-5088Lm dated 10 Mat 1991, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-W-5088L (NOTICE 1), MILITARY SPECIFICATION WIRING AEROSPACE VEHICLE (30 SEP 1998) [S/S BY SAE-AS50881]., MIL-W-5088L, dated 9 December 1992, is inactive for new design and is no longer used except for replacement purposes. Future design should refer to SAE-AS50881.

MIL-W-5088L, MILITARY SPECIFICATION WIRING AEROSPACE VEHICLE (10 MAY 1991) [S/S BY SAE-AS50881]. This specification covers all aspects from the selection through installation of wiring and wiring devices used in aerospace vehicles. Aerospace vehicles include airplanes, helicopters, lighter-than-air vehicles, and missiles.

MIL-W-52263C, MILITARY SPECIFICATION, WIRE, STEEL, CORROSION RESISTING, FREE MACHINING STOCK (30 JUN 1975) [S/S BY ASTM-A555 AND ASTM-A581]., Specification MIL-W-52263C(PIR),dated 7 May 1969, is hereby canceled. Future procurements for this material should refer to ASTM A 555 and ASTM A 581.

MIL-W-530H, MILITARY SPECIFICATION WEBBING, TEXTILE, COTTON, GENERAL PURPOSE, NATURAL OR IN COLORS (29 APR 1988)., This document covers various types of cotton webbing.

MIL-W-5424B, MILITARY SPECIFICATION, WIRE ROPE, STEEL, (CORROSION RESISTING) FLEXIBLE, PREFORMED (FOR AERONAUTICAL USE) (26 MAR 1970) [S/S BY MIL-W-83420]., This specification presents requirementsfor flexible, corrosion- resisting steel cable intended for aircraft structural applications.

MIL-W-5664D (NOTICE 1), MILITARY SPECIFICATION, WEBBING, TEXTILE, ELASTIC (12 JAN 1987).

MIL-W-5664D, MILITARY SPECIFICATION, WEBBING, TEXTILE, ELASTIC (12 JAN 1987)., This specification covers requirements for elastic webbings used in aviator and ground combat clothing and equipment.

MIL-W-5693C, MILITARY SPECIFICATION, WIRE STRAND, STEEL (CORROSION RESISTANT) PREFORMED (AIRCRAFT APPLICATIONS) (29 MAY 1963) [S/S BY MIL-W-87161]., This specification covers non-flexible, corrosion-resistant steel cable intended for use in aircraft applications other than flight controls.

MIL-W-63150, MILITARY SPECIFICATION WEAPONS AND SUPPORT MATERIEL STANDARD QUALITY ASSURANCE PROVISIONS FOR (1 AUG 1977)., This specification establishes quality assurance requirements for parts, assemblies, subsystems, and systems.

MIL-W-6370C (AMENDMENT 2), MILITARY SPECIFICATION, WIRE, ELECTRICAL, INSULATED, ANTENNA (14 NOV 1983).

MIL-W-6370C, MILITARY SPECIFICATION, WIRE, ELECTRICAL, INSULATED, ANTENNA (15 JUL 1963)., This specification covers insulated wire for use in external aircraft antennas.

MIL-W-6712C, MILITARY SPECIFICATION, WIRE, METALLIZING (3 OCT 1984) [S/S BY AWS-C2.25/C2.25M]., This specification covers wire for use in depositing metallic coatings by flame-spray techniques.

MIL-W-6858D (AMENDMENT 1), MILITARY SPECIFICATION, WELDING, RESISTANCE: SPOT AND SEAM (6 NOV 1992) [S/S BY SAE-AMS-W-6858]., This amendment forms a part of MIL-W38158D, dated 28 March 1978, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-W-6858D (NOTICE 1), MILITARY SPECIFICATION, WELDING, RESISTANCE: SPOT AND SEAM (30 JUL 1987) [S/S BY SAE-AMS-W-6858].

MIL-W-6858D (NOTICE 2), MILITARY SPECIFICATION, WELDING, RESISTANCE: SPOT AND SEAM (5 AUG 1999) [S/S BY SAE-AMS-W-6858]., MIL-W-6858D, dated 28 March 1978 and Amendment 1 dated 6 November 1992, is hereby canceled. Users may refer to SAE-AMS-W-6858, �Welding, Resistance: Spot and Seam�, as a possible replacement. Users are cautioned to evaluate AMS-W-6858 for their particular application before citing it as a replacement document.

MIL-W-6858D, MILITARY SPECIFICATION, WELDING, RESISTANCE: SPOT AND SEAM (28 MAR 1978) [S/S BY SAE-AMS-W-6858]., This specification covers requirements for resistance spot , and seam welding of the following metals and their alloys. Group 1 - Aluminum and magnesium Group 2 - Iron, nickel, and cobalt Group 3 - Titanium

MIL-W-7072B (ASG), WIRE, ELECTRIC, 600-VOLT, ALUMINUM, AIRCRAFT, GENERAL SPECIFICATION FOR (4 SEP 1962)., This specification covers 600-volt insulated single aluminum conductors capable of continuous operation at a maximum conductor temperature of 105 Degrees C (221 Degrees F).

MIL-W-76D (AMENDMENT 1), MILITARY SPECIFICATION, WIRE AND CABLE, HOOKUP, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR (6 FEB 2003)., This amendment forms part of MIL-W-76D, dated 21 September 1992, and is approved for use by all Departments and Agencies of the Department of Defense. MIL-W-76D is inactive for new design and is no longer used, except for replacement purposes.

MIL-W-76D (NOTICE 3), MILITARY SPECIFICATION, WIRE AND CABLE, HOOKUP, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR (19 JUN 2008)., MIL-W-76D, dated 21 September 1992, is hereby reinstated and may be used for acquisition.

MIL-W-76D, MILITARY SPECIFICATION, WIRE AND CABLE, HOOKUP, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR (21 SEP 1992)., This specification covers single-conductor, synthetic-resin insulated, electrical hookup wire and cable for use, at temperature from -55 Deg C to +90 Deg C (see 6.4.3), in the internal wiring of electrical and electronic equipment.

MIL-W-80043C (NOTICE 1), MILITARY SPECIFICATION, WELDING MACHINE, ARC, DC, TRANSFORMER-RECTIFIER, CONSTANT CURRENT (15 OCT 1998) [S/S BY NEMA-EW1]., MIL-W-80043C, dated 28 January 1981, is hereby canceled. Future acquisition for this material should refer to NEMA EW 1.

MIL-W-80043C, MILITARY SPECIFICATION, WELDING MACHINE, ARC, DC, TRANSFORMER-RECTIFIER, CONSTANT CURRENT (28 JAN 1981) [S/S BY NEMA-EW1]., This specification covers Arc Welding Machines of the industrial type, rated at 60 percent duty cycle, producing direct current, (DC) constant current output characteristics from a transformer-rectifier power supply for single operator shielded metal Arc Welding (SMAW) processes.

MIL-W-80243B, MILITARY SPECIFICATION, WELDING MACHINE, ARC, DC, TRANSFORMER-RECTIFIER, CONSTANT CURRENT, PROGRAMMED (31 DEC 1987)., This specification covers welding machine, arc, DC, rectifier, constant current, programmed with equipment and accessories specified herein.

MIL-W-81044B (SUPPLEMENT 1A), MILITARY SPECIFICATION, WIRE, ELECTRICAL, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARLYENE INSULATED, COPPER OR COPPER ALLOY (23 MAR 1981) [S/S BY SAE-AS81044].

MIL-W-81044B (SUPPLEMENT 1A), MILITARY SPECIFICATION, WIRE, ELECTRICAL, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARLYENE INSULATED, COPPER OR COPPER ALLOY (30 JUN 1990) [S/S BY SAE-AS81044].

MIL-W-81044B, MILITARY SPECIFICATION, WIRE, ELECTRICAL, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARLYENE INSULATED, COPPER OR COPPER ALLOY (31 DEC 1973) [S/S BY SAE-AS81044]., This specification covers single conductor electric wires made as specified in the applicable specification sheet with tin-coated, silver-coated, or nickel-coated copper or copper alloy conductors insulated with cross-linked polyalkene , cross-linked alkane-imide polymer, or polyarylene. The cross-linked polyalkene, cross-linked alkane-imide polymer, or polyarylene may be used alone or in combination with other insulation materials as specified in the specification sheet.

MIL-W-81560 (NOTICE 1), MILITARY SPECIFICATION, WEAPON, BIOLOGICAL AND CHEMICAL. GENERAL DESIGN SPECIFICATION FOR (09 OCT 1996)., MIL-W-81560 (AS), dated 12 September 1967, is hereby canceled without replacement.

MIL-W-81560, MILITARY SPECIFICATION, WEAPON, BIOLOGICAL AND CHEMICAL. GENERAL DESIGN SPECIFICATION FOR (12 SEP 1967)., This specification establishes general design requirements for all U. S. Navy biological and chemical weapons and prescribes uniform methods for qualification and evaluation testing to assure soundness of design, ability to withstand environmental extremes, adequate shelf life and safety in handling, transportation and storage. This specification. is intended for use by weapon design and developing activities. It covers the philosophy of design and the general design objectives for biological and chemical weapons.

MIL-W-81822A, WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR (3 MAR 1982)., This specification covers both insulated and uninsulated solid conductor wire, designed for solderless wrap connections in electrical and electronic devices and equipment. The terminations of the wire are intended to be made with hand or automatic tools which wrap the wire, under tension, around terminal pins (commonly called wrapposts) to form solderless wrapped connections.

MIL-W-8604A, MILITARY SPECIFICATION WELDING, FUSION; ALUMINUM ALLOYS; PROCESS AND PERFORMANCE OF (15 MAR 1982) (S/S BY MIL-STD-2219)., This specification covers the requirements for eight methods of fusion welding of aluminum alloys and four quality classes of welds.

MIL-W-8611, MILITARY SPECIFICATION, WELDING, METAL ARC AND GAS, STEELS, AND CORROSION AND HEAT RESISTANT ALLOYS; PROCESS FOR (24 JUL 1957) [S/S BY MIL-STD-2219]., This specification covers the requirements for the manual or machine welding of steels and corrosion and heat-resistant alloys for aircraft use.

MIL-W-8958, MILITARY SPECIFICATION, WIRE, STEEL, CORROSION-RESISTANT, HIGH STRENGTH (AM 355) (15 MAY 1967)., This specification covers a premium quality round high-strength wire of corrosion-resistant steel.

MIL-W-9880A (USAF) (AMENDMENT 1), WIRING HARNESS, IGNITION, LOW-TENSION, REWIREABLE, AIRCRAFT RECIPROCATING ENGINES, GENERAL SPECIFICATION FOR (22 APRIL 1971).

MIL-W-9880A, WIRING HARNESS, IGNITION, LOW-TENSION, REWIREABLE, AIRCRAFT RECIPROCATING ENGINES, GENERAL SPECIFICATION FOR (22 FEB 1971)., This specification establishes the requirements for procurement of low tension, rewirable, ignition harnesses for aircraft reciprocating engines. The iflition harnesses shall be of one grade and shall be of the size specified herein.

MIL-Y-1140H (AMENDMENT 1), MILITARY STANDARD YARN, CORD, SLEEVING, CLOTH, AND TAPE-GLASS (25 SEP 1985)., The amendment for& a part of Military Specification MIL-Y-1140H dated 13 Dec 1972, and is approved for use by ,all Departments and Agencies of the Department of Defense.

MIL-Y-1140H, MILITARY STANDARD YARN, CORD, SLEEVING, CLOTH, AND TAPE-GLASS (13 DEC 1972)., This specification primarily covers the basic forms of untreated glass fiber used by themselves or as components of other materials.

MIL-Z-63472, MILITARY SPECIFICATION, ZINC-ALUMINUM SUPERPLASTIC ALLOYS FOR THERMO FORMING, DEEP DRAWING AND STRETCH FORMING (26 SEP 1980)., This specification covers sheet, plate and strip stock Zn-Al superplastic alloys suitable for the production of parts by thermoforming, deep drawing, stretch forming, compression molding and other similar processes.