MIL-S-0055541H, MILITARY SPECIFICATION, SHELTER, ELECTRICAL EQUIPMENT S-250( )/G (NO S/S DOCUMENT)(20 DEC 1991)., This specification covers one type of Shelter, Electrical Equipment S-250()/G.

MIL-S-008806B, MILITARY SPECIFICATION, SOUND PRESSURE LEVELS IN AIRCRAFT, GENERAL SPECIFICATION FOR (21 SEP 1970) (FUTURE PROCUREMENT - SEE MIL-STD-1789). This specification covers the general requirements for maximum allowable sound pressure levels in aircraft crew and passenger compartments and the testing requirements for determining conformance to these levels.

MIL-S-11207D, MILITARY SPECIFICATION STEEL SHEETS, CORRUGATED, 2-1/2-INCH NOMINAL CORRUGATIONS, PAINTED OR UNPAINTED (20 AUG 1979) [S/S BY A-A-52313]., This specification covers painted or unpainted corrugated steel sheets.

MIL-S-12204C, MILITARY SPECIFICATION, SOLDER, LEAD-TIN ALLOY (4 JAN 1974) [S/S BY ASTM-B32]., This specification covers solder intended for use on aluminum and aluminum alloys.

MIL-S-12227F, MILITARY SPECIFICATION, SUIT, TOXICOLOGICAL AGENTS PROTECTIVE COVER, COOLING 8 MAY 1989)., This specification covers the requirements for a two-piece cotton birdseye cloth cooling suit comprised of a jacket and trousers.

MIL-S-13165C, MILITARY SPECIFICATION SHOT PEENING OF METAL PARTS (7 JUN 1989)., This specification covers procedure requirements for shot peening of metal parts, to induce residual compressive stresses in specified surfaces, for the purpose of improving resistance to fatigue, stress corrosion cracking, and galling

MIL-S-13949H (AMENDMENT 2), MILITARY SPECIFICATION, SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR (29 FEB 1996) [SUPERSEDING MIL-P-13949H]., This amendment forms a part of MIL-S-13949H dated 31 March 1993, and is approved for use by all Departments and Agencies of the Department of Defense

MIL-S-13949H (SUPPLEMENT 1), MILITARY SPECIFICATION, SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR (16 AUG 1993) [SUPERSEDING MIL-P-13949G].

MIL-S-13949H, MILITARY SPECIFICATION SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR (31 MAR 1993) [SUPERSEDING MIL-P-13949G]., This specification establishes the general requirements for fully cured metal clad or unclad laminates and prepreg to be used primarily for the fabrication of printed wiring for electrical and electronic circuits.

MIL-S-15464B, MILITARY SPECIFICATION, STEEL ALLOY, CHROMIUM-MOLYBDENUM; CASTINGS (15 JUN 1953) [S/S BY MIL-C-24707/2, ASTM-A217 AND ASTM-A389]., This specification covers heat treated alloy steel castings suitable for Naval use at temperatures not in excess of 1050 Deg. Fahrenheit (F).

MIL-S-16165E (SH), MILITARY SPECIFICATION SHIELDING HARNESSES, SHIELDING ITEMS AND SHIELDING ENCLOSURES FOR USE IN THE REDUCTION OF INTERFERENCE FROM ENGINE ELECTRICAL SYSTEMS () [SUPERSEDING MIL-I-16165D(SHIPS)]., This specification covers requirements for interference shielding items, shielding harnesses and shielding enclosures for engine electrical systems aboard Naval ships, at advance bases, and in the vicinity of electronic installations. It includes the allowable electromagnetic interference limits for such items and the permissible limits for auxiliary devices normally installed on electrical wiring systems associated with these engines.

MIL-S-16216K (NOTICE 1), MILITARY SPECIFICATION, STEEL PLATE, ALLOY, STRUCTURAL, HIGH YIELD STRENGTH (HY-80 AND HY-100) (5 JUN 2003) [S/S BY T9074-BD-GIB-010/300]., MIL-S-16216K(SH), dated 19 June 1987, is hereby canceled. T9074-BD- GIB-010/300, "Base Materials for Critical Applications: Requirements for Low Alloy Steel Plate, Forgings, Castings, Shapes, Bars, and Heads of HY- 80/100/130 and HSLA-80/100", with Change Notice 1, has been determined to be the suitable replacement. Users are cautioned to evaluate this document for their particular application before citing it as a replacement document.

MIL-S-16216K, MILITARY SPECIFICATION, STEEL PLATE, ALLOY, STRUCTURAL, HIGH YIELD STRENGTH (HY-80 AND HY-100) (19 JUN 1987) [S/S BY T9074-BD-GIB-010/300]., This specification covers grade HY-80 and grade HY-100, sheared or gas cut, alloy steel plates, intended primarily for use in critical applications where a notch-tough high-strength material is required.

MIL-S-16626D, MILITARY SPECIFICATION SLINGS, CARGO NET (NYLON OR MANILA) (11 MAY 1971) [S/S BY A-A-52534]., This specification covers three sizes of cargo net slings made of manila rope, nylon rope, or nylon braided cord.

MIL-S-17917A, MILITARY SPECIFICATION, SANDWICH CONSTRUCTION, ALUMINUM ALLOY FACINGS, BALSA WOOD CORE (9 JUL 1969)., This specification covers the requirements for structural sandwich composites consisting of aluminum alloy facings and balsa wood cores for aircraft structural application.

MIL-S-18313G, MILITARY SPECIFICATION SLINGS, CARGO, NET, NYLON WEBBING (11 APR 1978)., This specification covers flexible, lightweight with low storage cube nylon webbing, net, cargo slings.

MIL-S-18471G (AS), MILITARY SPECIFICATION, SYSTEM, AIRCREW AUTOMATED ESCAPE, EJECTION SEAT TYPE: GENERAL SPECIFICATION FOR (8 JUN 1983)., This specification establishes the requirements for the design, installation, demonstration, performance, and testing of an open type ejection seat aircrew automated escape systems. The escape system includes the ejection seat assembly, the aircraft canopy and escape path clearance subsystem the sequencing subsystem aircraft interface and the air crewmember interface.

MIL-S-19434B, MILITARY SPECIFICATION STEEL GEAR AND PINION FORGINGS, CARBON AND ALLOY, HEAT TREATED, NAVAL SHIPBOARD PROPULSION UNIT AND AUXILIARY TURBINE (31 DEC 1990)., This specification covers forging rims and blanks for gears and pinions to be used in gear assemblies for Naval shipboard propulsion units and auxiliary turbines.

MIL-S-19653B (NOTICE 1), MILITARY SPECIFICATION, SEALING COMPOUND (WOOD BEDDING)(13 JUL 1999)., MIL-S-19653B, including Amendment 2, dated 26 August 1992, is inactive for new design and is no longer used, except for replacement purposes.

MIL-S-19653B (SH), MILITARY SPECIFICATION SEALING COMPOUND (WOOD BEDDING), FORTIFIED (27 JUL 1984)., This specification covers a permanently plastic, waterproofing sealing compound for use between inner and outer planking of double planked hulls, and on other faying surfaces of wooden craft to prevent the passage or accumulation of water and to resist deterioration by decay fungi.

MIL-S-19653B(SH) (AMENDMENT 1), MILITARY SPECIFICATION, SEALING COMPOUND (WOOD BEDDING), FORTIFIED (19 FEB 1990)., This amendment forms a part of MIL-S-19653B(SH),dated 27 July 1984,and is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

MIL-S-19653B(SH) (AMENDMENT 2), MILITARY SPECIFICATION, SEALING COMPOUND (WOOD BEDDING), FORTIFIED (26 AUG 1992)., This amendment forms part of MIL-S-19653(SH), dated 27 July 1984, and is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

MIL-S-19653B(SH), MILITARY SPECIFICATION, SEALING COMPOUND (WOOD BEDDING), FORTIFIED (27 JUL 1984)., This specification covers a permanently plastic, waterproofing sealing compound for use between inner and outer planking of double planked hulls, and on other faying surfaces of wooden craft to prevent the passage or accumulation of water and to resist deterioration by decay fungi.

MIL-S-21472C, MILITARY SPECIFICATION SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR (31 OCT 1988) [S/S BY NASM21472]., This specification covers hexagaon slotted-head shoulder screws and socket-head shoulder screws

MIL-S-22141B (NOTICE 1), MILITARY SPECIFICATION STEEL INVESTMENT CASTINGS ALLOY AND CARBON (6 NOV 1991).

MIL-S-22141B, MILITARY SPECIFICATION STEEL INVESTMENT CASTINGS ALLOW AND CARBON (13 APR 1976)., This specification covers alloy and carbon steel castings made by the investment precision casting process.

MIL-S-22664B (SH) (AMENDMENT 1), MILITARY SPECIFICATION STEEL, STRUCTURAL SHAPES ALLOY, HIGH YIELD STRENGTH (HY-80 AND HY-100) (23 APR 1991).

MIL-S-22664B (SH) (NOTICE 1), MILITARY SPECIFICATION STEEL, STRUCTURAL SHAPES ALLOY, HIGH YIELD STRENGTH (HY-80 AND HY-100) (5 JUN 2003)., MIL-S-22664B(SH), dated 15 March 1988, with Amendment 1, dated 23 April 1991, is hereby canceled. T9074-BD-GIB-010/300, "Base Materials for Critical Applications: Requirements for Low Alloy Steel Plate, Forgings, Castings, Shapes, Bars, and Heads of HY-80/100/130 and HSLA-80/100", with Change Notice 1, has been determined to be the suitable replacement. Users are cautioned to evaluate this document for their particular application before citing it as a replacement document.

MIL-S-22664B (SH), MILITARY SPECIFICATION STEEL, STRUCTURAL SHAPES ALLOY, HIGH YIELD STRENGTH (HY-80 AND HY-100) (15 MAR 1988)., This specification covers HY-80 and HY-100 alloy steel rolled and extruded shapes for use in applications where good weldability and notch toughness are required.

MIL-S-22698C (AMENDMENT 1), MILITARY SPECIFICATION STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL (20 OCT 1994).,

MIL-S-22698C (SH) (AMENDMENT 2), MILITARY SPECIFICATION STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL (20 OCT 1994)., This amendment forms a part of MIL-S-22698C(SH), dated 29 June 1988, and is approved for use by the Naval Sea Systems Command, Departments and Agencies of the Department of Defense.

MIL-S-22698C, MILITARY SPECIFICATION STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL (29 JUN 1988)., This specification covers ordinary strength and higher strength steel plate, shapes and bars.

MIL-S-22824E, MILITARY SPECIFICATION SLINGS, MULTIPLE LEG, VEHICLE (SHIPBOARD LOADING (14 SEP 1993)[S/S BY FF-S-2874]., This specification covers multiple leg slings for shipboard loading of vehicles.

MIL-S-23190/1A, MILITARY SPECIFICATION, STRAP, CLAMPS, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT (27 SEP 1974) [S/S BY SAE-AS23190/1].

MIL-S-23190/2, MILITARY SPECIFICATION, STRAPS, CLAMPS, PLASTIC AND METAL, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP, LOOP, METAL, CUSHIONED, ADJUSTABLE, WIRE SUPPORT, TYPE V, CLASS 1 (28 MAR 1986) [S/S BY SAE-AS23190/2].

MIL-S-23190/3, MILITARY SPECIFICATION, STRAP, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT STRAP, TIE DOWN, ADJUSTABLE, CORROSION RESISTANT STEEL TYPE VI, CLASS 1 (28 MAR 1986 [S/S BY SAE-AS23190/3].

MIL-S-23190E (AMENDMENT 1), MILITARY SPECIFICATION, STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT (30 DEC 1987) [S/S BY SAE-AS23190].

MIL-S-23190E, MILITARY SPECIFICATION, STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT (28 MAR 1976) [S/S BY SAE-AS23190]., This specification covers a series of plastic and metal components and devices used for the tying and support of cable, cable assemblies and wire in electrical, electronic and communications equipment, and in interconnection systems.

MIL-S-23284A, MILITARY SPECIFICATION, STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, PROPELLER NUTS, COUPLINGS, AND STOCKS (RUDDERS AND DIVING PLANES) (15 JUN 1990)., This specification covers carbon and alloy steel forgings for torsional shafts, including propulsion shafts for ships, sleeves, couplings, propeller nuts, rudder stocks, diving plane stocks, and related parts.

MIL-S-23284A, STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, NUTS, COUPLINGS, AND STOCKS (RUDDERS AND SLEEVES, PROPELLER DIVING PLANES). This specification covers carbon and alloy steel forgings for torsional shafts, including propulsion shafts for ships, sleeves, couplings , propeller nuts, rudder stocks, diving plane stocks, and related parts.

MIL-S-24020A (NOTICE 1), MILITARY SPECIFICATION SONOBUOY AN/SSQ-48 (NO S/S DOCUMENT). Specification MIL-S-24020 (WEP) dated 1 November 1965 is hereby canceled.

MIL-S-24149C (AMENDMENT 1), MILITARY SPECIFICATION, STUDS, WELDING, AND ARC SHIELDS (FERRULES), GENERAL SPECIFICATION FOR (1 DEC 1989).

MIL-S-24149C, MILITARY SPECIFICATION, STUDS, WELDING, AND ARC SHIELDS (FERRULES), GENERAL SPECIFICATION FOR (1 JUN 1981)., This specification covers studs for welding with stud welding equipment and arc shields (ferrules) for shielding studs where applicable.

MIL-S-24214A, MILITARY SPECIFICATION, SHACKLES, STEEL, GENERAL PURPOSE REGULAR AND HIGH STRENGTH (10 OCT 1990) [S/S BY RR-C-271]., MIL-S-24214A(SH) , dated 20 June 1986, is hereby canceled. Future acquisition should be made under federal specification RR-C-271, Chains and Attachments, Welded and Weldless.

MIL-S-24948A, MILITARY SPECIFICATION SLACKS, WOMEN'S (WITH SIDE POCKETS) (10 FEB 1993)., This specification covers the requirements for women's side pocket slacks with straight and bell bottom legs.

MIL-S-25043C, MILITARY SPECIFICATION STEEL PLATE, SHEET, AND STRIP, 17-7 PH, CORROSION RESISTANT, PRECIPITATION HARDENING (9 MAY 1997) (S/S BY SAE-AMS5528 OR SAE-AMS5529)., MIL-S-25043C, dated 5 November 1965, is hereby canceled. Future acquisitions for this material should refer to the following SAE-AMS specifications, depending on which condition is desired, as indicated below.

MIL-S-28633C, MILITARY SPECIFICATION, SHELTER, EQUIPMENT, MULTIPURPOSE (20 MAY 1988) [S/S BY MIL-C-28689]., This specification covers one type of portable, multipurpose equipment shelter nominal 8 feet by 6 feet 8 inches.

MIL-S-29432B, MILITARY SPECIFICATION SLACKS, WOMEN'S (1 JUN 1994)., This specification covers the requirements for women's slacks.

MIL-S-29435B, MILITARY SPECIFICATION, MILITARY SPECIFICATION, SHELTER, ELECTRONICS MAINTENANCE COMPLEX (EMC); 10 FOOT, ELECTROMAGNETIC INTERFERENCE (EMI), 20 FOOT, ELECTROMAGNETIC INTERFERENCE (EMI), 10 FOOT, RIGID 20 FOOT, RIGID (1 MAR 1994)., This specification establishes the requirements for manufacture, acceptance and configuration for four types of EMC shelters.

MIL-S-29593(AS) (NOTICE 1), MILITARY SPECIFICATION SONOBUOY, AN/SSQ-110 (XJ-1), GENERAL SPECIFICATION FOR. MIL-S-29593(AS) is inactive for new design and is no longer used, except for replacement purposes.

MIL-S-29594, MILITARY SPECIFICATION, SPECTACLES, AVIATORS, SEVEN WAVELENGTH LASER EYE PROTECTIVE (17 JUL 1992)., This specification covers the requirements for one type of aviator's spectacles, with carrying case, designated EDU-6/P, which provide protection against seven fixed laser wavelengths and have prescription capability (see 6.2d and 6.21).

MIL-S-29630, MILITARY SPECIFICATION SLACKS, WOMEN'S (5 MAR 1991)., This specification covers the requirements for women's slacks with body types and lengths.

MIL-S-3105C (NOTICE 3), MILITARY SPECIFICATION, SEALING COMPOUND, INERT (FOR USE IN AMMUNITION) (19 SEP 2002)., MIL-S-3105C dated 4 December 1970 is hereby reinstated and may be used for acquisition.

MIL-S-3289 (AMENDMENT 1), MILITARY SPECIFICATION, STEEL, PLATE AND DISK, CARBON, FORGING QUALITY (13 JUN 2002)., This amendment forms a part of MIL-S-3289B, dated 25 SEPTEMBER 1984, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-S-3289, MILITARY SPECIFICATION, STEEL, PLATE AND DISK, CARBON, FORGING QUALITY (23 APR 1965)., This specification covers one composition of forging quality carbon steel plate and disks, for steel cartridge cases for 20MM and larger ammunition.

MIL-S-3443D, MILITARY SPECIFICATION SHOTGUN 12 GAGE, RIOT-TYPE, (5 NOV 1975)., This specification covers two types and classes of manually operated, slide action, hammerless, 12 gage riot-type shotguns.

MIL-S-3443E, MILITARY SPECIFICATION SHOTGUN 12 GAGE, RIOT-TYPE, (20 MAR 1989)., This specification covers the requirements, examinations and tests for three types and two classes, of manually operated, slide action, hammerless, 12 gage riot-type shotguns.

MIL-S-3443G (AR) (NOTICE 1), MILITARY SPECIFICATION SHOTGUN, 12 GAGE RIOT-TYPE (12 DEC 1995)., MIL-S-3443 (AR), dated 4 OCT 1993, is inactive for new design and is no longer used, except for replacement purposes.

MIL-S-3443G, MILITARY SPECIFICATION SHOTGUN 12 GAGE, RIOT-TYPE, (4 OCT 1993)., This specification covers the requirements, examinations and tests for three types and two classes, of manually operated, slide action, hammerless, 12 gage riot-type shotguns.

MIL-S-36609B, MILITARY SPECIFICATION SURVIVAL KIT, INDIVIDUAL, TROPICAL, TACTICAL AIR CREW (19 JAN 1977)., This specification covers a kit containing specified medical and survival items intended to sustain the lives of air crewmen under survival conditions in the tropical climate of Southeast Asia (see 6.4).

MIL-S-37988, MILITARY SPECIFICATION SURVIVAL KIT, INDIVIDUAL, TROPICAL, TACTICAL AIR CREW, IN PLASTIC BAG (2 OCT 1985)., This specification covers a kit containing specified medical and survival items intended to sustain the lives of air crewmen under survival conditions in a tropical climate.

MIL-S-38228 (AMENDMENT 2), MILITARY SPECIFICATION, SEALING COMPOUND, ENVIRONMENTAL, FOR AIRCRAFT SURFACES (8 MAY 1967).

MIL-S-38228, MILITARY SPECIFICATION, SEALING COMPOUND, ENVIRONMENTAL, FOR AIRCRAFT SURFACES (28 JUL 1964)., This specification covers temperature-resistant and weather-resistant synthetic rubber compounds for filling and sealing exterior surfaces of aircraft and missiles.

MIL-S-38794B, MILITARY SPECIFICATION, SOURCE DATA: PREPARATION OF (FOR NON-NUCLEAR MUNITIONS DISPOSAL PROCEDURES MANUALS, LOADING PROCEDURES, MANUALS, AND POSITIONING AND TIEDOWN MANUALS) (17 JUN 1983)., This specification covers the requirements for the preparation of source data for inclusion in non-nuclear munitions disposal procedures manuals, loading procedures manuals and positioning and tiedown manuals.

MIL-S-4174B, MILITARY SPECIFICATION, STEEL SHEET AND STRIP, FLAT, ALUMINUM COATED LOW CARBON (9 FEB 1968) [S/S BY SAE-AMS5036 AND ASTM-A463]., This specification covers the requirements for cold rolled low carbon steel sheet and strip coated on both sides with a layer of aluminum using a hot-dipped coating process.

MIL-S-41825F, MILITARY SPECIFICATION, SLACKS, WOMEN'S (30 AUG 1988)., This specification covers the requirements for women's slacks.

MIL-S-43292D, MILITARY SPECIFICATION, STATIC LINES, CARGO PARACHUTES, GENERAL SPECIFICATION FOR (23 AUG 1989)., This specification covers the general requirements for four types of airdrop cargo static lines.

MIL-S-44110B, MILITARY SPECIFICATION SLACKS, MATERNITY, UTILITY WORK UNIFORM (10 JAN 1991)., This specification covers maternity slacks made of cotton poplin cloth, woodland camouflage pattern.

MIL-S-45743E (AMENDMENT 1), MILITARY SPECIFICATION, SOLDERING, MANUAL TYPE, HIGH RELIABILITY ELECTRICAL AND ELECTRONIC EQUIPMENT (17 SEP 1979) (S/S BY MIL-STD-2000).

MIL-S-45743E (NOTICE 1), MILITARY SPECIFICATION, SOLDERING, MANUAL TYPE, HIGH RELIABILITY ELECTRICAL AND ELECTRONIC EQUIPMENT (8 SEP 1989) (S/S BY MIL-STD-2000).

MIL-S-45743E (NOTICE 2), MILITARY SPECIFICATION, SOLDERING, MANUAL TYPE, HIGH RELIABILITY ELECTRICAL AND ELECTRONIC EQUIPMENT (27 FEB 1995) (S/S BY MIL-STD-2000)., MIL-S-45743E, dated 15 October 1976, is hereby canceled. Future acquisitions should refer to MIL-STD-2000A, “Standard Requirements for Soldered Electrical and Electronic Assemblies.”

MIL-S-45743E, MILITARY SPECIFICATION, SOLDERING, MANUAL TYPE, HIGH RELIABILITY ELECTRICAL AND ELECTRONIC EQUIPMENT (15 OCT 1976) (S/S BY MIL-STD-2000)., This specification covers soldering, high reliability electrical and electronic connections with maual soldering apparatus as applicable to guided missile and certain aerospace equipment requiring extraordinary control of soldering environment and techniques. Is not applicable to general soldering requirements

MIL-S-45909C (SUPPLEMENT 1), MILITARY SPECIFICATION, STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (27 MAR 1989) [S/S BY NASM45909].

MIL-S-45909C, MILITARY SPECIFICATION, STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (27 MAR 1989) [S/S BY NASM45909]., This specification covers the requirements for locked-in studs. The method of locking the stud is by means of a serrated collar and an accessory lock ring with matching serrations installed within a parent material to prevent rotation.

MIL-S-46850D, MILITARY SPECIFICATION STEEL: BAR, PLATE, SHEET, STRIP, FORGINGS, AND EXTRUSIONS, 18 PERCENT NICKEL ALLOY, MARAGING, 200 KSI, 250 KSI, 300 KSI, AND 350 KSI, HIGH QUALITY (22 MAR 1991)., This specification covers steel bars, plate, sheet, strip, forgings and extrusions containing 18 percent nickel and capable of attaining high ultimate tensile properties by means of a relatively low temperature heat treating process

MIL-S-47147, MILITARY SPECIFICATION, SEALS, RUBBER EXTRUSIONS, NON-CELLULAR [SUPERSEDING MIS-15736]., This specification covers the requirements for non-cellular rubber extrusions of four different shapes.

MIL-S-47319A, MILITARY SPECIFICATION, STEEL, BAR, BILLET, AND FORGINGS, COBALT-FREE MARAGING (26 NOV 1991)., This specification defines the requirements of two classes of one type of steel bar, forgings and stock for forging, cobalt-free maraging, containing 18 percent nickel and capable of attaining high ultimate tensile properties by means of a relatively low temperature heat treating process.

MIL-S-49248B, MILITARY SPECIFICATION, SHELTER, ELECTRONIC EQUIPMENT, S-639/G AND S-640/G (12 FEB 1987)., This specification covers the following: (i) Shelter, Electronics Equipment S-639/G is a mobile assemblage house in a modified S-280()/G shelter equipped with work benches, storage cabinets and racks, lighting, air conditioning, and power to form an electronic repair shop for the maintenance of electronic equipment. It is cable of being transported by railroad, military truck, and airlift; and (ii) ) Shelter, Electronics Equipment S-639/G is a mobile assemblage house in a modified S-640()/G shelter equipped with storage cabinets and racks, lighting, exhaust blowers, and dehumidifier to form an storage shelter to support the repair shop assemblage. It is cable of being transported by railroad, military truck, and airlift.

MIL-S-5000E (NOTICE 1), MILITARY SPECIFICATION STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS, AND FORGING STOCK (27 SEP 1995)., MIL-S-5000E, dated 12 November 1982, is hereby cancelled. Future acquisitions for this material should refer to AMS 6415, Bars, Forgings, and Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340); or, AMS 6484, Steel Bars, Forgings, and Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.38-0.43C), Normalized and Tempered, (SAE 4340). (Application for copies of SAE AMS publications should be addressed to the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096.)

MIL-S-5000E (NOTICE 2), MILITARY SPECIFICATION STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS, AND FORGING STOCK (11 AUG 2000)., MIL-S-5000E, dated 12 November 1982, is hereby canceled. Future acquisition for this material should refer to SAE-AMS-S-5000, “Steel, Chrome-Nickel-Molybdenum (E4340) bars and reforging stock.” (Application for copies of SAE – Aerospace Standards should be addressed to SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)

MIL-S-5000E, MILITARY SPECIFICATION STEEL, CHROME-NICKEL-MOLYBDENUM (E4340) BARS AND REFORGING STOCK (12 NOV 1982)., This specification covers electric furnace steel bars and reforging stock of aircraft quantity.

MIL-S-5002D (AMENDMENT 2), MILITARY SPECIFICATION, SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS (20 OCT 1999)[SUPERSEDING AMENDMENT 1]., This amendment forms a part of MIL-S-5002D, dated 30 November 1989, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-S-5002D, MILITARY SPECIFICATION, SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS (30 NOV 1989)., This specification covers the requirements for cleaning, surface treatments and inorganic coatings for metallic surfaces of weapons systems parts.

MIL-S-5059D (AMENDMENT 2), STEEL, CORROSION RESISTANT (18-8) PLATE, SHEET AND STRIP (29 NOV 1985)., This amendment forms a part of MIL-S-50590, dated 30 May 1983, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-S-5059D (AMENDMENT 3), STEEL, CORROSION RESISTANT (18-8) PLATE, SHEET AND STRIP (6 APR 1990)., This amendment forms a part of MIL-S-50590, dated 30 May 1983, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-S-5059D (NOTICE 1), STEEL, CORROSION RESISTANT (18-8) PLATE, SHEET AND STRIP (20 SEP 1993) (S/S BY SAE-AMS5513, SAE-AMS5910 THRU 5913, SAE-AMS5524, SAE-AMS5516 THRU 5519, SAE-AMS5901 THRU 5907)., MIL-S-5059D,dated 30 May 1983, including amendment 3 dated 6 April 1990, is hereby canceled. Future aquis!tlons for this material should refer to the following Aerospace Material Specifications (AMS) shown below for each alloy and temper condition.

MIL-S-5059D, STEEL, CORROSION RESISTANT (18-8) PLATE, SHEET AND STRIP (30 MAY 1983)., This specification covers the requirements for four types and five conditions of aircraft quality corrosion-resistant (18-8) steel plate, sheet and strip.

MIL-S-50827A (AR) (NOTICE 1), MILITARY SPECIFICATION SOFT SOLDERED ELECTRICAL CONNECTIONS FOR CONVENTIONAL WEAPONS ITEMS INCLUDING OTHER RELATED ELECTRONIC DEVICES (19 MAR 1990) [S/S BY MIL-STD-2000]., MIL-S-50827A (MU), dated 1 November 1974, with Amendment 1, dated 18 April 1977, are hereby canceled. Future acquisitions invoking these requirements should refer to MIL-STD-2000, Standard Requirements for Soldered Electrical and Electronic Assemblies.

MIL-S-50827A (MU) (AMENDMENT 1), MILITARY SPECIFICATION SOFT SOLDERED ELECTRICAL CONNECTIONS FOR CONVENTIONAL WEAPONS ITEMS INCLUDING OTHER RELATED ELECTRONIC DEVICES (18 APR 1977) [S/S BY MIL-STD-2000].

MIL-S-50827A, MILITARY SPECIFICATION SOFT SOLDERED ELECTRICAL CONNECTIONS FOR CONVENTIONAL WEAPONS ITEMS INCLUDING OTHER RELATED ELECTRONIC DEVICES (1 NOV 1974) [S/S BY MIL-STD-2000]., This specification covers requirements and inspection criteria for soft soldered electrical connections in intricate and complex electronic or electromechanical items related to conventional weapons and other associated electronic devices. These items are high production rate devices in which mission performance is accomplished by a pattern or salvo. The specification aims at the establishment and maintenance of a process level adequate to support functional requirements.

MIL-S-5300(ME)MILITARY SPECIFICATION, SCRAPER, 14-18 CUBIC YARD MINIMUM STRUCK CAPACITY OPEN BOWL, SINGLE-DIESEL-ENGINE-DRIVEN COMMERCIAL CONSTRUCTION EQUIPMENT (CCE) (5 JUL 2005)., This specification is approved for use by the Mobility Equipment Research and Development Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense. This specification covers a commercial open bowl, pneumatic-tired, two-axle, 14-18 cubic yard minimum struck capacity, single-diesel-engine-driven, articulated frame steer scraper.

MIL-S-53000(ME) (NOTICE 1), MILITARY SPECIFICATION, SCRAPER, 14-18 CUBIC YARD MINIMUM STRUCK CAPACITY, OPEN BOWL, SINGLE DIESEL-ENGINE-DRIVEN, COMMERCIAL CONSTRUCTION EQUIPMENT (CCE) (9 MAR 1998)., This notice should be filed in front of MIL-S-53000(ME), dated 18 December 1981. MIL-S-53000(ME) is inactive for new design and is no longer used, except for replacement purposes.

MIL-S-53000(ME), MILITARY SPECIFICATION, SCRAPER, 14-18 CUBIC YARD MINIMUM STRUCK CAPACITY OPEN BOWL, SINGLE-DIESEL-ENGINE-DRIVEN, COMMERCIAL CONSTRUCTION EQUIPMENT (CCE) (18 DEC 1991)., This specification covers a commercial open bowl, pneumatic-tired, two-axle, 14-18 cubic yard minimum struck capacity, single-diesel-engine-driven, articulated frame steer scraper.