MIL-P-10971E (AMENDMENT 3), MILITARY STANDARD, PIN, SPRING, TUBULAR (COILED AND SLOTTED) (3 APR 1992) [S/S BY NASM 10971].

MIL-P-10971E, MILITARY STANDARD, PIN, SPRING, TUBULAR (COILED AND SLOTTED) (13 MAR 1956) [S/S BY NASM 10971].

MIL-P-116J (AMENDMENT 1), MILITARY SPECIFICATION PRESERVATION, METHODS OF (29 SEPT 1989)., This amendment forms a part of MIL-P-116J, dated 08 April 1988, and is approved for use by all Departments and Agencies of the Department of Defense

MIL-P-116J (AMENDMENT 2), MILITARY SPECIFICATION PRESERVATION, METHODS OF (18 AUG 1993)., This amendment forms a part of MIL-P116J, dated 8 April 1988, and is approved for use by all departments and Agencies of the Department of Defense.

MIL-P-116J, MILITARY SPECIFICATION PRESERVATION, METHODS OF (8 APR 1988)., This specification covers the methods of preservation required to protect material against environment induced corrosion and deterioration, physical and mechanical damage, and other forms of degradation. This specification provides for routine examination and hen specified, test procedures to be employed in verifying conformance (unit pack validation) with the requirements contained herein.

MIL-P-130F, MILITARY SPECIFICATION, PAPER, WRAPPING, LAMINATED AND CREPED (30 SEP 1985)., This document covers creped wrapping paper, laminated or treated if necessary, for use as a protective cover or wrapper.

MIL-P-15011J, MILITARY SPECIFICATION, PALLET, MATERIAL HANDLING, WOOD, POST CONSTRUCTION, 4 WAY ENTRY (16 SEP 1985)., This specification covers the design, materials, and fabrication of material handling pallets for general storage and air cargo handling.

MIL-P-15024E, DETAIL SPECIFICATION PLATES, TAGS, AND BANDS FOR IDENTIFICATION OF EQUIPMENT, GENERAL SPECIFICATION FOR (29 JAN 1993) (S/S BY MIL-DTL-1502F)., This performance specification covers the physical characteristics of plates, tags and bands (identification devices) used for identification of equipment. Examples of information to be marked on the identification devices are covered in the applicable specification sheets.

MIL-P-15280J (NOTICE 1), MILITARY SPECIFICATION, PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES) (22 APR 1998)., MIL-P-15280J, dated 19 December 1988, is inactive for new design and is no longer used, except for replacement purposes.

MIL-P-15280J, MILITARY SPECIFICATION PLASTIC, MATERIAL, UNICELLULAR (SHEETS AND TUBES) (19 DEC 1988)., This specification establishes the requirements for chemically expanded plastic foam material for thermal insulation.

MIL-P-15877D, MILITARY SPECIFICATION, PIPE SUPPORT DEVICES (HANGERS AND SWAYBRACES, SHIPBOARD USE) (29 JUN 1973)., This specification covers constant support, variable support pipe hangers and swaybraces for shipboard piping.

MIL-P-15943D, FEDERAL SPECIFICATION PALLET, MATERIAL HANDLING, WOOD, SHIP CARGO, STEVEDORING, 48 INCHES LONG BY 72 INCHES WIDE, 2-WAY ENTRY (30 MAR 1982)., This specification covers the design, materials, and fabrication of materials handling pallets for stevedoring and drum handling operations.

MIL-P-16005E, MILITARY SPECIFICATION PROPELLANT, HYDROGEN PEROXIDE. This specification covers hydrogen peroxide (H2O2) propellant.

MIL-P-17549D, MILITARY SPECIFICATION PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE (31 AUG 1981)., This specification covers fibrous glass reinforced plastic laminates for use in marine applications. The characteristics defined for specific grades of laminate are representative of those laminates produced by good commercial practice.

MIL-P-17552F (YD)(NOTICE 1), MILITARY SPECIFICATION, PUMP UNITS, CENTRIFUGAL, WATER, HORIZONTAL; GENERAL SERVICE AND BOILER-FEED: ELECTRIC-MOTOR- OR STEAM-TURBINE-DRIVEN (19 JUN 1997)., Military Specification MIL-P-17552F(YD), dated 25 November 1991, is hereby canceled. Future acquisition of this material should refer to Commercial Item Description A-A-50562.

MIL-P-17749E (NOTICE 1), MILITARY SPECIFICATION, PUMPING UNITS, CONDENSATE, RETURN; AND BOILER FEED PACKAGE (2 JUN 1997)., Military Specification MIL-P-17749E, dated 22 March 1993, is hereby canceled. Future acquisition of this material should refer to Federal Specification F-P-2908.

MIL-P-17842, MILITARY SPECIFICATION, POWER PLANT VIBRATION ISOLATOR, DESIGN AND INSTALLATION REQUIREMENTS (1 JUL 1954)., This specification establishes the requirements for the design and installation of power-plant vibration isolators.

MIL-P-18066C (NOTICE 1), MILITARY SPECIFICATION, PLYWOOD, SHIP AND BOAT CONSTRUCTION (27 DEC 1990)., MIL-P-18066C, dated 31 July 1985 has been reviewed and determined to be valid for use in acquisition.

MIL-P-18177C, MILITARY SPECIFICATION PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBER BASE, EPOXY-RESIN (23 MAY 1960) (S/S BY MIL-I-24768/2 AND MIL-I-24768/3)., This specification covers glass cloth, or oriented nonwoven parallel aligned glass fibers, epoxy-resin, plastic thermosetting sheet material primarily for electrical insulating purposes.

MIL-P-18317 (NOrd), MILITARY SPECIFICATION PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL. This specification covers one type, class, and grade of plating, black nickel (electrodeposited) for blackening brass, bronze and steel surfaces, applicable where a minimum distraction of the operators vision is desired as in the interior of optical instruments.

MIL-P-18324D (AMENDMENT 2), MILITARY SPECIFICATION, PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION) (14 JUN 1968).

MIL-P-18324D, MILITARY SPECIFICATION, PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION) (24 NOV 1964)., This specification covers laminated phenolic resin cotton fabric base material. The material is available in the form of sheets or shapes. This specification is applicable only to sizes such that polished 1/2 inch cubes may be prepared from the material.

MIL-P-19380/1 (NOTICE 1), MILITARY SPECIFICATION SHEET, PONTOONS, STEEL, SECTIONAL, P-SERIES DETAIL SPECIFICATION FOR (10 MAY 1995)., This notice should be filed in front of MIL-P-193801/1 dated 29 March 1981. MIL-P-19380/1 is inactive for new design and is no longer used, except for replacement purposes.

MIL-P-19380/2 (NOTICE 1), MILITARY SPECIFICATION SHEET, PONTOONS, JOINING FITTINGS, TOOLS, AND GAGES, DETAIL SPECIFICATION FOR (10 MAY 1995)., This notice should be filed in front of MIL-P-193801/2 dated 28 March 1981. MIL-P-19380/2 is inactive for new design and is no longer used, except for replacement purposes.

MIL-P-19380/3 (NOTICE 1), MILITARY SPECIFICATION SHEET, DECK FITTINGS AND OUTFITTING ACCESSORIES, DETAIL SPECIFICATION FOR (10 MAY 1995)., This notice should be filed in front of MIL-P-19380/3 dated 28 March 1981. MIL-P-19830/3 is inactive for new design and is no longer used, except for replacement purposes.

MIL-P-19380/4 (NOTICE 1), MILITARY SPECIFICATION SHEET, DRYDOCK EQUIPMENT, MISCELLANEOUS FITTINGS AND ACCESSORIES, DETAIL SPECIFICATION FOR (10 MAY 1995)., This notice should be filed in front of MIL-P-19380/4 dated 7 September 1967. Mil-P-19380/4 is inactive for new design and is no longer used, except for replacement purposes.

MIL-P-19380J (NOTICE 1), MILITARY SPECIFICATION, PONTOONS, STEEL, SECTIONAL, P-SERIES: INCLUDING FITTINGS AND TOOLS (FOR COUPLING INTO FLOATING STRUCTURES), GENERAL SPECIFICATION FOR (10 MAY 1995)., This notice should be filed in front of MIL-P-19380J dated 28 March 1981. MIL-P-19380J is inactive for new design and is no longer used, except for replacement purposes.

MIL-P-19419A, MILITARY SPECIFICATION, PLATING, CHROMIUM, ELECTRO-DEPOSITED, (ON THE INTERIOR SURFACES OF 20 MM MARK 11 GUN BARRELS) (1 NOV 1960)., This specification presents detailed requirements for high contraction electro-deposited chromium plating on the bores, grooves, and chambers of 20mm Mark 11 Gun Barrels.

MIL-P-19644C, MILITARY SPECIFICATION, PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD) (10 JUL 1970)., This specification covers shapes formed from expandable bead or pellet polystyrene and the general requirements for both the material and the shapes

MIL-P-197H (w/ AMENDMENT 1), DETAIL SPECIFICATION PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES (29 JUL 1994)., This specification covers the cleaning, drying, preservation, packaging, and packaging marking requirements for all types and sizes of stock and production bearings, associated parts, and subassemblies (see 6.1).

MIL-P-197H, DETAIL SPECIFICATION PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES (29 JUL 1994)., This specification covers the cleaning, drying, preservation, packaging, and packaging marking requirements for all types and sizes of stock and production bearings, associated parts, and subassemblies (see 6.1).

MIL-P-19834B, MILITARY SPECIFICATION PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED GENERAL SPECIFICATION FOR (7 NOV 1972) (S/S BY MIL-DTL-19834C). This specification covers adhesive-backed metal foil identification or instruction plates, herein referred to as identification plates, for use as internal and external equipment identification or instruction (see 6.1).

MIL-P-20700A, MILITARY SPECIFICATION PIN, GROOVED, HEADLESS, LONGITUDINAL GROOVE (17 MAR 1965) [S/S BY NASM20700]., This specification covers headless grooved pins having longitudinal grooves (see 6.1).

.MIL-P-21035B (NOTICE 1), MILITARY SPECIFICATION, PAINT HIGH ZINC DUST CONTENT, GALVANIZING REPAIR (5 MAY 1998)., MIL-P-21035B, dated 30 April 1991, is hereby canceled without replacement.

MIL-P-21035B(SH) (NOTICE 2), MILITARY SPECIFICATION, PAINT HIGH ZINC DUST CONTENT, GALVANIZING REPAIR (30 JAN 2003)., MIL-P-21035B, dated 30 April 1991, is hereby reinstated and may be used for acquisition.

MIL-P-21035B (SH) (NOTICE 2), MILITARY SPECIFICATION, PAINT HIGH ZINC DUST CONTENT, GALVANIZING REPAIR (METRIC) (30 JAN 2003)., MIL-P-21035B, dated 30 April 1991, is hereby reinstated and may be used for acquisition.

MIL-P-21035B, MILITARY SPECIFICATION, PAINT HIGH ZINC DUST CONTENT, GALVANIZING REPAIR (30 APR 1991)., This specification covers a high zinc dust content paint for regalvanizing welds in galvanized steels.

MIL-P-21415C (OS), MILITARY SPECIFICATION, PROTECTIVE FINISH AND PAINTING FOR POLARIS FLEET BALLISTIC MISSILE (1 FEB 1973)., This specification defines the requirements for protective finish and painting of fleet ballistic missile components.

MIL-P-21563B, MILITARY SPECIFICATION, PAINT SYSTEM, FLUORESCENT, FOR AIRCRAFT APPLICATION (ASA) (11 DEC 1962)., This specification covers a high visibility, durable, exterior, fluorescent paint system including clear overlay containing a weathering stabilizer

MIL-P-21600A (WEP), MILITARY SPECIFICATION, PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION (26 OCT 1962) [S/S BY SAE-AMS-P-21600]., This specification covers the requirements for a high visibility, durable, exterior, fluorescent paint system consisting of a pigmented fluorescent paint with a clear protective over coating containing a weathering stabilizer. This paint system is capable of being removed without softening the permanent undercoats.

MIL-P-21698A (NOTICE 1), PAINT, FLUORESCENT, FOR AIRCRAFT, PROCESS FOR APPLICATION OF (1 APR 1987)., MIL-P-21698A(AS) , dated 1 October 1960, is hereby cancel led without replacement.

MIL-P-22241B, MILITARY SPECIFICATION, PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN) (26 NOV 1973) [S/S BY ASTM-D3293, ASTM-D3308, AND ASTM-D3369]., This specification covers sintered, unfilled, unpigmented, polytetrafluoroethylene (TFE-fluorocarbon resin) sheet ranging in thickness from 0.001 inch to 4 inches inclusive.

MIL-P-22314, MILITARY SPECIFICATION PROPELLANTS, U.S. NAVY GUNS; BALLISTIC APPENDIX (17 FEB 1960)., This specification covers the ballistic requirements for all propellant powders procured for use in U. S. Navy guns except aircraft guns.

MIL-P-23210E, MILITARY SPECIFICATION PLATFORMS, ALUMINUM AND STEEL; AND ACCESSORIES (FOR SHIPS BROWS) (5 FEB 1991)., This document covers aluminum and steel platforms and accessories for brows (ships' gangplanks).

MIL-P-23210E, MILITARY SPECIFICATION, PLATFORMS, ALUMINUM AND STEEL; AND ACCESSORIES (FOR SHIPS' BROWS) (5 FEB 1991)., This document covers aluminum and steel platforms and accessories for brows (ships' gangplanks).

MIL-P-23242B, MILITARY SPECIFICATION, PLASTIC COATING COMPOUND, STRIPPABLE - ELECTROPLATING (22 MAR 1982)., This specification covers the requirements for one type of hot-dip, stop-off, strippable plastic coating intended for masking metallic areas not to be plated during an electroplating process.

MIL-P-23377F, PERFORMANCE SPECIFICATION PRIMER COATINGS: EPOXY, HIGH-SOLIDS (5 MAY 1989) (S/S BY MIL-PRF-23377). This specification covers the requirements for corrosion inhibiting, chemical and solvent resistant, solvent-borne, epoxy primer coatings that have a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L)(2.8 pounds per gallon [lb/gal]).

MIL-P-23408B, MILITARY SPECIFICATION, PLATING: TIN-CADMIUM (ELECTRO-DEPOSITED) (23 AUG 1983)., This specification covers the requirements for three classes of tin-cadmium alloy plating.

MIL-P-23460E (AMENDMENT 2), MILITARY SPECIFICATION, PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING (14 DEC 1999) [S/S BY NASM23460]. This amendment forms a part of MIL-P-23460E, dated 20 November 1991, and is approved by all Departments and Agencies of the Department of Defense.

MIL-P-23460E, MILITARY SPECIFICATION PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING (20 NOV 1991) [S/S BY NASM23460]., This specification covers positive locking, single and double-acting quick release pins for use on aircraft.

MIL-P-23469D (SUPPLEMENT 1), MILITARY SPECIFICATION, PIN-RIVET, GROOVED AND COLLAR, GROOVED PIN-RIVET, SWAGE-LOCKED (LOCKPIN) GENERAL SPECIFICATION FOR (22 DEC 1992).

MIL-P-23469D, MILITARY SPECIFICATION, PIN-RIVET, GROOVED AND COLLAR, GROOVED PIN-RIVET, SWAGE-LOCKED (LOCKPIN) GENERAL SPECIFICATION FOR (22 DEC 1992)., This specification covers metal fasteners of the pull-tool type, each comprising a headed, grooved pin secured by a collar swaged into the grooves, and for installation without bucking more than manual restraint on the head.

MIL-P-24014 (WEP) (NOTICE 1), MILITARY SPECIFICATION PRECLUSION OF HAZARDS FROM ELECTROMAGNETIC RADIATION TO ORDNANCE, GENERAL REQUIREMENTS FOR. Specification MIL-P-24014 (WEP) is hereby canceled. The superseding document is MIL-STD-1385.

MIL-P-24380B, MILITARY SPECIFICATION, PAINT, ANCHOR CHAIN, SOLVENT TYPE, GLOSS BLACK (25 JAN 1989) [SUPERSEDING DOD-P-24380C]., This specification establishes the requirements for a fast drying, solvent type, gloss black paint for application on steel anchor chains.

MIL-P-24396A (SH), MILITARY SPECIFICATION, PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFIJJOROETHYLENE) (28 FEB 1994)., This specification covers three types of braided polytetrafluoroethylene (PTFE) yarn packing impregnated with PTFE dispersion. All types of packing are for setice on Naval ships when stuffing box temperatures are limited to a maximum of 450 degrees Fahrenheit (“F).

MIL-P-24396A(SH), MILITARY SPECIFICATION, PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUROETHYLENE) (28 FEB 1994)., This specification covers three types of braided polytetra-fluoroethylene (PTFE) yarn packing impregnated with PTFE dispersion. All types of packing are for service on Naval ships when stuffing box temperatures are limited to a maximum of 450 degrees Fahrenheit (“F).

MIL-P-24423 (SHIPS) (AMENDMENT 1), MILITARY SPECIFICATION, PROPULSION AND AUXILIARY CONTROL CONSOLES AND ASSOCIATED CONTROL AND INSTRUMENTATION EQUIPMENT, NAVAL SHIPBOARD USE, BASIC DESIGN REQUIREMENTS (1 MAY 1970).

MIL-P-24423, MILITARY SPECIFICATION, PROPULSION AND AUXILIARY CONTROL CONSOLES AND ASSOCIATED CONTROL AND INSTRUMENTATION EQUIPMENT, NAVAL SHIPBOARD USE, BASIC DESIGN REQUIREMENTS (1 MAY 1970)., This specification covers the basic general requirements applicable to the design, materials, construction, inspection, and operation conditions for automated or centralized propulsion and auxiliary control consoles together with their associated control and instrumentation equipment used for Naval shipboard service.

MIL-P-24441/11A, MILITARY SPECIFICATION, PAINT, EPOXY-POLYAMIDE, EXTERIOR TOPCOAT, HAZE GRAY, FORMULA 151R66, TYPE 2 (15 JUL 1980) [S/S BY MIL-P-24441/21]., The requirements for acquiring the paint described herein shall consist of this document and the latest issue of MIL-P-24441(SH).

MIL-P-24441/2C, MILITARY SPECIFICATION, PAINT, EPOXY-POLYAMIDE, EXTERIOR TOPCOAT, HAZE GRAY, FORMULA 151, TYPE I (23 JUL 1991) [S/S BY MIL-P-24441/21]., The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of”Defense Index of Specifications and Standards (DODISS) specified in the solicitation: MIL-P-24441.

MIL-P-24534A, MILITARY SPECIFICATION PLANNED MAINTENANCE SYSTEM: DEVELOPMENT OF MAINTENANCE REQUIREMENT CARDS, MAINTENANCE INDEX PAGES, AND ASSOCIATED DOCUMENTATION (7 MAY 1985)., This specification identifies the requirements and standards for the development and production of Maintenance Requirements Cards (MRCs), Maintenance Index Pages (MIPs), and other associated documentation used with the Navy Maintenance and Material Management (3-M) Systems , Planned Maintenance System (PMS), OPNAVINST 4790.4, Volme 1.

MIL-P-24589A (AMENDMENT 1), MILITARY SPECIFICATION PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE (7 APR 1994).

MIL-P-24589A, MILITARY SPECIFICATION PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE (20 MAY 1992)., This specification establishes requirements for balanced pressure proportioning systems for use with AFFF liquid concentrate for fire fighting services.

MIL-P-24691 (AMENDMENT 2), MILITARY SPECIFICATION, PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR (4 FEB 1991).

MIL-P-24691, MILITARY SPECIFICATION, PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR (23 SEP 1987)., This specification covers carbon, alloy, and stainless steel seamless and welded pipe and tube.

MIL-P-26366A (AMENDMENT 1), MILITARY SPECIFICATION, PROPELLER SYSTEMS, AIRCRAFT, GENERAL SPECIFICATION FOR (7 SEP 1977)., This specification covers standard requirements and test for aircraft propeller systems

MIL-P-26366A, MILITARY SPECIFICATION, PROPELLER SYSTEMS, AIRCRAFT, GENERAL SPECIFICATION FOR (15 NOV 1962)., This specification covers standard requirements and test for aircraft propeller systems.

MIL-P-26367A, MILITARY SPECIFICATION, PROPELLER SYSTEMS, AIRCRAFT, MODEL SPECIFICATION FOR (OUTLINE AND INSTRUCTIONS FOR PREPARATION) (11 FEB 1966)., This specification establishes the form to be used by manufacturers in the preparation of specifications for aircraft propeller system models.

MIL-P-27235A, MILITARY SPECIFICATION, PIN, STRAIGHT, HEADED (CLEVIS PINS) (27 NOV 1968)., This specification covers solid, metal, cylindrical, headed straight pins, which are commonly referred to as clevis pins (see 6.1).

MIL-P-27418, MILITARY SPECIFICATION, PLATING, SOFT NICKEL ELECTRO-DEPOSITED, SULFAMATE BATH (14 JUL 1967)., This specification covers the processes and requirements for soft nickel plating.

MIL-P-28578B (NOTICE 1), MILITARY SPECIFICATION, PAINT, WATER-BORNE, ACRYLIC OR MODIFIED ACRYLIC, SEMIGLOSS, FOR METAL SURFACES (17 JAN 1997)., Military Specification MIL-P-28578B, dated 7 July 1988, is hereby canceled. Future acquisition of this material should refer to Commercial Item Description A-A-50570.

MIL-P-28809B (NOTICE 1), MILITARY SPECIFICATION CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE, AND RIGID FLEX (21 APR 1995)., MIL-9-28809B, dated 13 May 1988, is hereby canceled without replacement.

MIL-P-28809B, MILITARY SPECIFICATION CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE, AND RIGID FLEX (13 MAY 1988)., This specification establishes the requirements for circuit card assemblies, consisting of printed wiring boards on which separately manufactured parts have been added. The term ‘assemblies” Is used herein when referring to circuit card assemblies. The term “board’ is used herein when referring to printed wiring board or printed circuit boards.

MIL-P-29191B(YD1), MILITARY SPECIFICATION, PLATFORM, PONTOON, WORKBOAT, (OIL CONTAINMENT BOOM HANDLING) (3 JUN 1994)., This specification covers one type and size workboat platform, for use in handling oil containment booms in harbors and inland waterways.

MIL-P-29206A (NOTICE 1), MILITARY SPECIFICATION, PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, FOR LIQUID PETROLEUM LINES (17 OCT 2001)., MIL-P-29206A, dated 7 August 1992, is hereby cancelled without replacement.

MIL-P-29590, MILITARY SPECIFICATION POWER SUPPLIES, AIRBORNE, ELECTRONIC GENERAL SPECIFICATION FOR. This specification covers the general requirements for families of standard electronic power supplies for use in military aircraft systems including combat and other mission critical applications. These power supplies are coordinated under the Standard Hardware Acquisition and Reliability Program (SHARP).

MIL-P-36863, PAD, SANITARY, HEAVY (7 JUL 1972) [S/S BY A-A-54856]., This specification covers an absorbent cellulose filled type pad suitable for perineal use after rectal surgery, for vaginal bleeding, and for obstetrics and gynecological purposes.

MIL-P-3984J (AMENDMENT 3, MILITARY SPECIFICATION, PROPELLANTS FOR SMALL ARMS AMMUNITION (12 JUN 2000)., This Amendment forms a part of MIL-P-3984J dated 25 May 1992, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-P-3984J, MILITARY SPECIFICATION, PROPELLANTS FOR SMALL ARMS AMMUNITION (25 MAY 1992)., This specification covers propellant for use in small arms ammunition.

MIL-P-43607G (AMENDMENT 4), MILITARY SPECIFICATION, PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE (8 JUN 1992)., This amendment forms a part of Military Specification MIL-P-43607G, dated 18 June 1986, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-P-44403, MILITARY SPECIFICATION, PASSAGEWAY, COMPLEXING KIT (16 MAR 1990)., This specification covers the requirements for two types of passageways for the complexing kit.

MIL-P-45209B, MILITARY SPECIFICATION PALLADIUM PLATING, (ELECTRODEPOSITED) (23 JAN 1981) [S/S BY ASTM-B679]., This specification covers electrodeposited palladium plating on metal surfaces.

MIL-P-46094 (AMENDMENT 1), MILITARY SPECIFICATION, PLASTIC FILLER COMPOUND, EPOXY, FOR HONEYCOMB PANELS (22 JUN 1977) [SUPERSEDING MPD-3219A].

MIL-P-46094, MILITARY SPECIFICATION, PLASTIC FILLER COMPOUND, EPOXY, FOR HONEYCOMB PANELS (23 FEB 1965) [SUPERSEDING MPD-3219A]., This specification covers an epoxy type material with filler.

MIL-P-46115B, MILITARY STANDARD, PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE (12 SEP 1977)., This specification covers one type of polyphenylene oxide molding and extrusion material.

MIL-P-46144C (NOTICE 1), MILITARY SPECIFICATION, PLASTIC SHEET, POLYCARBONATE (9 JUN 2000)., MIL-P-46144C, dated 3 June 1986, is hereby canceled. Future acquisition for this material should refer commercial item description A-A-59502, "PLASTIC SHEET, POLYCARBONATE".

MIL-P-46144C, MILITARY SPECIFICATION PLASTIC SHEET, POLYCARBONATE (3 JUN 1986) (S/S BY A-A-59502)., This specification covers polycarbonate sheet.

MIL-P-46179A, MILITARY SPECIFICATION, PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYAMIDE IMIDE (PAI) (15 JAN 1986) [S/S BY ASTM-D5204]., This specification covers polyamide-imide (PAI) thermoplastic materials intended for use up to 260 degrees C (500 degrees F).

MIL-P-46195 (AMENDMENT 1), MILITARY SPECIFICATION PROGRAM REQUIREMENTS, NONDESTRUCTIVE INSPECTION, FOR WEAPONS SYSTEMS, SUBSYSTEMS, PARTS AND MATERIALS (18 AUG 1988).

MIL-P-46195, MILITARY SPECIFICATION PROGRAM REQUIREMENTS, NONDESTRUCTIVE INSPECTION, FOR WEAPONS SYSTEMS, SUBSYSTEMS, PARTS AND MATERIALS (13 JUL 1987)., This specification provides requirements for establishing a nondestructive inspection program for the life cycle of weapons systems, subsystems, parts and materials.

MIL-P-46463C, MILITARY SPECIFICATION PRIMER, PERCUSSION, M71A1 PARTS FOR (14 NOV 1966)., This specification covers the parts for one type of percussion primer designated as Primer, Percussion, M71A1.

MIL-P-46994B (AMENDMENT 4), MILITARY SPECIFICATION, PELLETS/GRANULES BORON/POTASSIUM NITRATE (11 NOV 1993).

MIL-P-46994B, MILITARY SPECIFICATION, PELLETS/GRANULES BORON/POTASSIUM NITRATE (4 JAN 1982)., This specification covers seven (7) types of igniter pellets/granules for use in rocket motors and fuzes.

MIL-P-47158, MILITARY SPECIFICATION, PENETRANT INSPECTION, SOUNDNESS REQUIREMENTS FOR MATERIALS, PARTS AND WELDMENTS (7 JUN 1974) [SUPERSEDING MPD-I0567A] [S/S BY MIL-STD-1907]., This specification describes the defect limits allowed under four quality level classifications for the penetrant inspection of forgings, castings, tubes, sheets, bars, etc., (usually nonmagnetic 7 in the following fabrication stages: a. Unmachined or unwelded parts or materials. b. Machined parts. c. Weldments; for purposes of this specification, the term Weldments refers to deposited filler metal and areas of base metal adjacent thereto which are likely to be affected by the welding operation. Brazed joints may also be considered as Weldments under this specification.

MIL-P-47184A, MILITARY SPECIFICATION, PLATING, NICKEL-TUNGSTEN, ELECTRODEPOSITED ON ALUMINUM ALLOYS, BY SELECTIVE (BRUSH) METHOD (12 DEC 1990)., This specification establishes the materials, method, and requirements for the plating of a nickel-tungsten alloy on aluminum as applied by the brush method.

MIL-P-47226A, MILITARY SPECIFICATION, PLATING, COPPER, ELECTROLESS (FOR NON-CONDUCTING MATERIAL) (30 MAR 1992)., This specification covers the requirements for chemically-deposited conductive copper films used to coat electrically non-conducting materials.

MIL-P-50884D (w/AMENDMENT 2), MILITARY SPECIFIC