Your free source for specifications, standards, and handbooks
MIL SPECS (MIL-P)
MIL-P-116J, MILITARY SPECIFICATION PRESERVATION, METHODS OF (8 APR 1988)
MIL-P-116J, MILITARY SPECIFICATION PRESERVATION, METHODS OF (8 APR 1988)., This specification covers the methods of preservation required to protect material against environment induced corrosion and deterioration, physical and mechanical damage, and other forms of degradation. This specification provides for routine examination and hen specified, test procedures to be employed in verifying conformance (unit pack validation) with the requirements contained herein.
Ident. Num:
MIL-P-116
Rev. Num:
J
MIL-P-116J, MILITARY SPECIFICATION PRESERVATION, METHODS OF (8 APR 1988)., This specification covers the methods of preservation required to protect material against environment induced corrosion and deterioration, physical and mechanical damage, and other forms of degradation. This specification provides for routine examination and hen specified, test procedures to be employed in verifying conformance (unit pack validation) with the requirements contained herein.
MIL-P-15011J, MILITARY SPECIFICATION, PALLET, MATERIAL HANDLING, WOOD, POST CONSTRUCTION, 4 WAY ENTRY (16 SEP 1985)
MIL-P-15011J, MILITARY SPECIFICATION, PALLET, MATERIAL HANDLING, WOOD, POST CONSTRUCTION, 4 WAY ENTRY (16 SEP 1985)., This specification covers the design, materials, and fabrication of material handling pallets for general storage and air cargo handling.
Ident. Num:
MIL-P-15011
Rev. Num:
J
MIL-P-15011J, MILITARY SPECIFICATION, PALLET, MATERIAL HANDLING, WOOD, POST CONSTRUCTION, 4 WAY ENTRY (16 SEP 1985)., This specification covers the design, materials, and fabrication of material handling pallets for general storage and air cargo handling.
MIL-P-15024E, DETAIL SPECIFICATION PLATES, TAGS, AND BANDS FOR IDENTIFICATION OF EQUIPMENT, GENERAL SPECIFICATION FOR (29 JAN 1993) (S/S BY MIL-DTL-15
MIL-P-15024E, DETAIL SPECIFICATION PLATES, TAGS, AND BANDS FOR IDENTIFICATION OF EQUIPMENT, GENERAL SPECIFICATION FOR (29 JAN 1993) (S/S BY MIL-DTL-1502F)., This performance specification covers the physical characteristics of plates, tags and bands (identification devices) used for identification of equipment. Examples of information to be marked on the identification devices are covered in the applicable specification sheets.
Ident. Num:
MIL-P-15024
Rev. Num:
E
MIL-P-15024E, DETAIL SPECIFICATION PLATES, TAGS, AND BANDS FOR IDENTIFICATION OF EQUIPMENT, GENERAL SPECIFICATION FOR (29 JAN 1993) (S/S BY MIL-DTL-1502F)., This performance specification covers the physical characteristics of plates, tags and bands (identification devices) used for identification of equipment. Examples of information to be marked on the identification devices are covered in the applicable specification sheets.
MIL-P-15280J, MILITARY SPECIFICATION PLASTIC, MATERIAL, UNICELLULAR (SHEETS AND TUBES) (19 DEC 1988)
MIL-P-15280J, MILITARY SPECIFICATION PLASTIC, MATERIAL, UNICELLULAR (SHEETS AND TUBES) (19 DEC 1988)., This specification establishes the requirements for chemically expanded plastic foam material for thermal insulation.
Ident. Num:
MIL-P-15280
Rev. Num:
J
MIL-P-15280J, MILITARY SPECIFICATION PLASTIC, MATERIAL, UNICELLULAR (SHEETS AND TUBES) (19 DEC 1988)., This specification establishes the requirements for chemically expanded plastic foam material for thermal insulation.
MIL-P-15943D, FEDERAL SPECIFICATION PALLET, MATERIAL HANDLING, WOOD, SHIP CARGO, STEVEDORING, 48 INCHES LONG BY 72 INCHES WIDE, 2-WAY ENTRY (30 MAR 19
MIL-P-15943D, FEDERAL SPECIFICATION PALLET, MATERIAL HANDLING, WOOD, SHIP CARGO, STEVEDORING, 48 INCHES LONG BY 72 INCHES WIDE, 2-WAY ENTRY (30 MAR 1982)., This specification covers the design, materials, and fabrication of materials handling pallets for stevedoring and drum handling operations.
Ident. Num:
MIL-P-15943
Rev. Num:
D
MIL-P-15943D, FEDERAL SPECIFICATION PALLET, MATERIAL HANDLING, WOOD, SHIP CARGO, STEVEDORING, 48 INCHES LONG BY 72 INCHES WIDE, 2-WAY ENTRY (30 MAR 1982)., This specification covers the design, materials, and fabrication of materials handling pallets for stevedoring and drum handling operations.
MIL-P-16005E, MILITARY SPECIFICATION PROPELLANT, HYDROGEN PEROXIDE
MIL-P-16005E, MILITARY SPECIFICATION PROPELLANT, HYDROGEN PEROXIDE. This specification covers hydrogen peroxide (H2O2) propellant.
Ident. Num:
MIL-P-16500
Rev. Num:
E
MIL-P-16005E, MILITARY SPECIFICATION PROPELLANT, HYDROGEN PEROXIDE. This specification covers hydrogen peroxide (H2O2) propellant.
MIL-P-17549D, MILITARY SPECIFICATION PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE (31 AUG 1981)
MIL-P-17549D, MILITARY SPECIFICATION PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE (31 AUG 1981)., This specification covers fibrous glass reinforced plastic laminates for use in marine applications. The characteristics defined for specific grades of laminate are representative of those laminates produced by good commercial practice.
Ident. Num:
MIL-P-17549
Rev. Num:
D
MIL-P-17549D, MILITARY SPECIFICATION PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE (31 AUG 1981)., This specification covers fibrous glass reinforced plastic laminates for use in marine applications. The characteristics defined for specific grades of laminate are representative of those laminates produced by good commercial practice.
MIL-P-18177C, MILITARY SPECIFICATION PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBER BASE, EPOXY-RESIN (23 MAY 1960) (S/S BY MIL-I-24768/2 AND MIL-I-24768/3)
MIL-P-18177C, MILITARY SPECIFICATION PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBER BASE, EPOXY-RESIN (23 MAY 1960) (S/S BY MIL-I-24768/2 AND MIL-I-24768/3)., This specification covers glass cloth, or oriented nonwoven parallel aligned glass fibers, epoxy-resin, plastic thermosetting sheet material primarily for electrical insulating purposes.
Ident. Num:
MIL-P-18177
Rev. Num:
C
MIL-P-18177C, MILITARY SPECIFICATION PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBER BASE, EPOXY-RESIN (23 MAY 1960) (S/S BY MIL-I-24768/2 AND MIL-I-24768/3)., This specification covers glass cloth, or oriented nonwoven parallel aligned glass fibers, epoxy-resin, plastic thermosetting sheet material primarily for electrical insulating purposes.
MIL-P-18317 (NOrd), MILITARY SPECIFICATION PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL
MIL-P-18317 (NOrd), MILITARY SPECIFICATION PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL. This specification covers one type, class, and grade of plating, black nickel (electrodeposited) for blackening brass, bronze and steel surfaces, applicable where a minimum distraction of the operators vision is desired as in the interior of optical instruments.
Ident. Num:
MIL-P-18317
Rev. Num:
-
MIL-P-18317 (NOrd), MILITARY SPECIFICATION PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL. This specification covers one type, class, and grade of plating, black nickel (electrodeposited) for blackening brass, bronze and steel surfaces, applicable where a minimum distraction of the operators vision is desired as in the interior of optical instruments.
MIL-P-197H (w/ AMENDMENT 1), DETAIL SPECIFICATION PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES (29 JUL 1994)
MIL-P-197H (w/ AMENDMENT 1), DETAIL SPECIFICATION PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES (29 JUL 1994)., This specification covers the cleaning, drying, preservation, packaging, and packaging marking requirements for all types and sizes of stock and production bearings, associated parts, and subassemblies (see 6.1).
Ident. Num:
MIL-P-197
Rev. Num:
H
MIL-P-197H (w/ AMENDMENT 1), DETAIL SPECIFICATION PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES (29 JUL 1994)., This specification covers the cleaning, drying, preservation, packaging, and packaging marking requirements for all types and sizes of stock and production bearings, associated parts, and subassemblies (see 6.1).
MIL-P-197H, DETAIL SPECIFICATION PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES (29 JUL 1994)
MIL-P-197H, DETAIL SPECIFICATION PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES (29 JUL 1994)., This specification covers the cleaning, drying, preservation, packaging, and packaging marking requirements for all types and sizes of stock and production bearings, associated parts, and subassemblies (see 6.1).
Ident. Num:
MIL-P-197
Rev. Num:
H
MIL-P-197H, DETAIL SPECIFICATION PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES (29 JUL 1994)., This specification covers the cleaning, drying, preservation, packaging, and packaging marking requirements for all types and sizes of stock and production bearings, associated parts, and subassemblies (see 6.1).
MIL-P-19834B, MILITARY SPECIFICATION PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED GENERAL SPECIFICATION FOR (7 NOV 1972) (S/S BY
MIL-P-19834B, MILITARY SPECIFICATION PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED GENERAL SPECIFICATION FOR (7 NOV 1972) (S/S BY MIL-DTL-19834C). This specification covers adhesive-backed metal foil identification or instruction plates, herein referred to as identification plates, for use as internal and external equipment identification or instruction (see 6.1).
Ident. Num:
MIL-P-19834
Rev. Num:
B
MIL-P-19834B, MILITARY SPECIFICATION PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED GENERAL SPECIFICATION FOR (7 NOV 1972) (S/S BY MIL-DTL-19834C). This specification covers adhesive-backed metal foil identification or instruction plates, herein referred to as identification plates, for use as internal and external equipment identification or instruction (see 6.1).
MIL-P-20700A, MILITARY SPECIFICATION PIN, GROOVED, HEADLESS, LONGITUDINAL GROOVE (17 MAR 1965) [S/S BY NASM20700]
MIL-P-20700A, MILITARY SPECIFICATION PIN, GROOVED, HEADLESS, LONGITUDINAL GROOVE (17 MAR 1965) [S/S BY NASM20700]., This specification covers headless grooved pins having longitudinal grooves (see 6.1).
Ident. Num:
MIL-P-20700
Rev. Num:
A
MIL-P-20700A, MILITARY SPECIFICATION PIN, GROOVED, HEADLESS, LONGITUDINAL GROOVE (17 MAR 1965) [S/S BY NASM20700]., This specification covers headless grooved pins having longitudinal grooves (see 6.1).
MIL-P-22314, MILITARY SPECIFICATION PROPELLANTS, U.S. NAVY GUNS; BALLISTIC APPENDIX (17 FEB 1960)
MIL-P-22314, MILITARY SPECIFICATION PROPELLANTS, U.S. NAVY GUNS; BALLISTIC APPENDIX (17 FEB 1960)., This specification covers the ballistic requirements for all propellant powders procured for use in U. S. Navy guns except aircraft guns.
Ident. Num:
MIL-P-22314
Rev. Num:
-
MIL-P-22314, MILITARY SPECIFICATION PROPELLANTS, U.S. NAVY GUNS; BALLISTIC APPENDIX (17 FEB 1960)., This specification covers the ballistic requirements for all propellant powders procured for use in U. S. Navy guns except aircraft guns.
MIL-P-23210E, MILITARY SPECIFICATION PLATFORMS, ALUMINUM AND STEEL; AND ACCESSORIES (FOR SHIPS BROWS) (5 FEB 1991)
MIL-P-23210E, MILITARY SPECIFICATION PLATFORMS, ALUMINUM AND STEEL; AND ACCESSORIES (FOR SHIPS BROWS) (5 FEB 1991)., This document covers aluminum and steel platforms and accessories for brows (ships' gangplanks).
Ident. Num:
MIL-P-23210
Rev. Num:
E
MIL-P-23210E, MILITARY SPECIFICATION PLATFORMS, ALUMINUM AND STEEL; AND ACCESSORIES (FOR SHIPS BROWS) (5 FEB 1991)., This document covers aluminum and steel platforms and accessories for brows (ships' gangplanks).
MIL-P-23377F, PERFORMANCE SPECIFICATION PRIMER COATINGS: EPOXY, HIGH-SOLIDS (5 MAY 1989) (S/S BY MIL-PRF-23377)
MIL-P-23377F, PERFORMANCE SPECIFICATION PRIMER COATINGS: EPOXY, HIGH-SOLIDS (5 MAY 1989) (S/S BY MIL-PRF-23377). This specification covers the requirements for corrosion inhibiting, chemical and solvent resistant, solvent-borne, epoxy primer coatings that have a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L)(2.8 pounds per gallon [lb/gal]).
Ident. Num:
MIL-P-23377
Rev. Num:
F
MIL-P-23377F, PERFORMANCE SPECIFICATION PRIMER COATINGS: EPOXY, HIGH-SOLIDS (5 MAY 1989) (S/S BY MIL-PRF-23377). This specification covers the requirements for corrosion inhibiting, chemical and solvent resistant, solvent-borne, epoxy primer coatings that have a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L)(2.8 pounds per gallon [lb/gal]).
MIL-P-23460E, MILITARY SPECIFICATION PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING (20 NOV 1991) [S/S BY NASM23460]
MIL-P-23460E, MILITARY SPECIFICATION PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING (20 NOV 1991) [S/S BY NASM23460]., This specification covers positive locking, single and double-acting quick release pins for use on aircraft.
Ident. Num:
MIL-P-23460
Rev. Num:
E
MIL-P-23460E, MILITARY SPECIFICATION PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING (20 NOV 1991) [S/S BY NASM23460]., This specification covers positive locking, single and double-acting quick release pins for use on aircraft.
MIL-P-24014 (WEP) (NOTICE 1), MILITARY SPECIFICATION PRECLUSION OF HAZARDS FROM ELECTROMAGNETIC RADIATION TO ORDNANCE, GENERAL REQUIREMENTS FOR
MIL-P-24014 (WEP) (NOTICE 1), MILITARY SPECIFICATION PRECLUSION OF HAZARDS FROM ELECTROMAGNETIC RADIATION TO ORDNANCE, GENERAL REQUIREMENTS FOR. Specification MIL-P-24014 (WEP) is hereby canceled. The superseding document is MIL-STD-1385.
Ident. Num:
MIL-P-24014
Rev. Num:
-
MIL-P-24014 (WEP) (NOTICE 1), MILITARY SPECIFICATION PRECLUSION OF HAZARDS FROM ELECTROMAGNETIC RADIATION TO ORDNANCE, GENERAL REQUIREMENTS FOR. Specification MIL-P-24014 (WEP) is hereby canceled. The superseding document is MIL-STD-1385.
MIL-P-24534A, MILITARY SPECIFICATION PLANNED MAINTENANCE SYSTEM: DEVELOPMENT OF MAINTENANCE REQUIREMENT CARDS, MAINTENANCE INDEX PAGES, AND ASSOCIATED
MIL-P-24534A, MILITARY SPECIFICATION PLANNED MAINTENANCE SYSTEM: DEVELOPMENT OF MAINTENANCE REQUIREMENT CARDS, MAINTENANCE INDEX PAGES, AND ASSOCIATED DOCUMENTATION (7 MAY 1985)., This specification identifies the requirements and standards for the development and production of Maintenance Requirements Cards (MRCs), Maintenance Index Pages (MIPs), and other associated documentation used with the Navy Maintenance and Material Management (3-M) Systems , Planned Maintenance System (PMS), OPNAVINST 4790.4, Volme 1.
Ident. Num:
MIL-P-24534
Rev. Num:
A
MIL-P-24534A, MILITARY SPECIFICATION PLANNED MAINTENANCE SYSTEM: DEVELOPMENT OF MAINTENANCE REQUIREMENT CARDS, MAINTENANCE INDEX PAGES, AND ASSOCIATED DOCUMENTATION (7 MAY 1985)., This specification identifies the requirements and standards for the development and production of Maintenance Requirements Cards (MRCs), Maintenance Index Pages (MIPs), and other associated documentation used with the Navy Maintenance and Material Management (3-M) Systems , Planned Maintenance System (PMS), OPNAVINST 4790.4, Volme 1.
MIL-P-24589A (AMENDMENT 1), MILITARY SPECIFICATION PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE (7 APR 1994)
MIL-P-24589A (AMENDMENT 1), MILITARY SPECIFICATION PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE (7 APR 1994).
Ident. Num:
MIL-P-24589
Rev. Num:
A
MIL-P-24589A (AMENDMENT 1), MILITARY SPECIFICATION PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE (7 APR 1994).
MIL-P-24589A, MILITARY SPECIFICATION PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE (20 MAY 1992)
MIL-P-24589A, MILITARY SPECIFICATION PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE (20 MAY 1992)., This specification establishes requirements for balanced pressure proportioning systems for use with AFFF liquid concentrate for fire fighting services.
Ident. Num:
MIL-P-24589
Rev. Num:
A
MIL-P-24589A, MILITARY SPECIFICATION PROPORTIONER SYSTEMS, BALANCED PRESSURE, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE (20 MAY 1992)., This specification establishes requirements for balanced pressure proportioning systems for use with AFFF liquid concentrate for fire fighting services.
MIL-P-28809B (NOTICE 1), MILITARY SPECIFICATION CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE, AND RIGID FLEX (21 APR 1995)
MIL-P-28809B (NOTICE 1), MILITARY SPECIFICATION CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE, AND RIGID FLEX (21 APR 1995)., MIL-9-28809B, dated 13 May 1988, is hereby canceled without replacement.
Ident. Num:
MIL-P-28809
Rev. Num:
B
MIL-P-28809B (NOTICE 1), MILITARY SPECIFICATION CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE, AND RIGID FLEX (21 APR 1995)., MIL-9-28809B, dated 13 May 1988, is hereby canceled without replacement.
MIL-P-28809B, MILITARY SPECIFICATION CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE, AND RIGID FLEX (13 MAY 1988)
MIL-P-28809B, MILITARY SPECIFICATION CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE, AND RIGID FLEX (13 MAY 1988)., This specification establishes the requirements for circuit card assemblies, consisting of printed wiring boards on which separately manufactured parts have been added. The term ‘assemblies” Is used herein when referring to circuit card assemblies. The term “board’ is used herein when referring to printed wiring board or printed circuit boards.
Ident. Num:
MIL-P-28809
Rev. Num:
B
MIL-P-28809B, MILITARY SPECIFICATION CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE, AND RIGID FLEX (13 MAY 1988)., This specification establishes the requirements for circuit card assemblies, consisting of printed wiring boards on which separately manufactured parts have been added. The term ‘assemblies” Is used herein when referring to circuit card assemblies. The term “board’ is used herein when referring to printed wiring board or printed circuit boards.
MIL-P-29590, MILITARY SPECIFICATION POWER SUPPLIES, AIRBORNE, ELECTRONIC GENERAL SPECIFICATION FOR
MIL-P-29590, MILITARY SPECIFICATION POWER SUPPLIES, AIRBORNE, ELECTRONIC GENERAL SPECIFICATION FOR. This specification covers the general requirements for families of standard electronic power supplies for use in military aircraft systems including combat and other mission critical applications. These power supplies are coordinated under the Standard Hardware Acquisition and Reliability Program (SHARP).
Ident. Num:
MIL-P-29590
Rev. Num:
-
MIL-P-29590, MILITARY SPECIFICATION POWER SUPPLIES, AIRBORNE, ELECTRONIC GENERAL SPECIFICATION FOR. This specification covers the general requirements for families of standard electronic power supplies for use in military aircraft systems including combat and other mission critical applications. These power supplies are coordinated under the Standard Hardware Acquisition and Reliability Program (SHARP).
MIL-P-45209B, MILITARY SPECIFICATION PALLADIUM PLATING, (ELECTRODEPOSITED) (23 JAN 1981) [S/S BY ASTM-B679]
MIL-P-45209B, MILITARY SPECIFICATION PALLADIUM PLATING, (ELECTRODEPOSITED) (23 JAN 1981) [S/S BY ASTM-B679]., This specification covers electrodeposited palladium plating on metal surfaces.
Ident. Num:
MIL-P-45209
Rev. Num:
B
MIL-P-45209B, MILITARY SPECIFICATION PALLADIUM PLATING, (ELECTRODEPOSITED) (23 JAN 1981) [S/S BY ASTM-B679]., This specification covers electrodeposited palladium plating on metal surfaces.
MIL-P-46115B, MILITARY STANDARD, PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE (12 SEP 1977)
MIL-P-46115B, MILITARY STANDARD, PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE (12 SEP 1977)., This specification covers one type of polyphenylene oxide molding and extrusion material.
Ident. Num:
MIL-P-46115
Rev. Num:
B
MIL-P-46115B, MILITARY STANDARD, PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE (12 SEP 1977)., This specification covers one type of polyphenylene oxide molding and extrusion material.
MIL-P-46144C, MILITARY SPECIFICATION PLASTIC SHEET, POLYCARBONATE (3 JUN 1986) (S/S BY A-A-59502)
MIL-P-46144C, MILITARY SPECIFICATION PLASTIC SHEET, POLYCARBONATE (3 JUN 1986) (S/S BY A-A-59502)., This specification covers polycarbonate sheet.
Ident. Num:
MIL-P-46144
Rev. Num:
C
MIL-P-46144C, MILITARY SPECIFICATION PLASTIC SHEET, POLYCARBONATE (3 JUN 1986) (S/S BY A-A-59502)., This specification covers polycarbonate sheet.
MIL-P-46195 (AMENDMENT 1), MILITARY SPECIFICATION PROGRAM REQUIREMENTS, NONDESTRUCTIVE INSPECTION, FOR WEAPONS SYSTEMS, SUBSYSTEMS, PARTS AND MATERIALS (18 AUG 1988)
MIL-P-46195 (AMENDMENT 1), MILITARY SPECIFICATION PROGRAM REQUIREMENTS, NONDESTRUCTIVE INSPECTION, FOR WEAPONS SYSTEMS, SUBSYSTEMS, PARTS AND MATERIALS (18 AUG 1988).
Ident. Num:
MIL-P-46195
Rev. Num:
-
MIL-P-46195 (AMENDMENT 1), MILITARY SPECIFICATION PROGRAM REQUIREMENTS, NONDESTRUCTIVE INSPECTION, FOR WEAPONS SYSTEMS, SUBSYSTEMS, PARTS AND MATERIALS (18 AUG 1988).
MIL-P-46195, MILITARY SPECIFICATION PROGRAM REQUIREMENTS, NONDESTRUCTIVE INSPECTION, FOR WEAPONS SYSTEMS, SUBSYSTEMS, PARTS AND MATERIALS (13 JUL 1987)
MIL-P-46195, MILITARY SPECIFICATION PROGRAM REQUIREMENTS, NONDESTRUCTIVE INSPECTION, FOR WEAPONS SYSTEMS, SUBSYSTEMS, PARTS AND MATERIALS (13 JUL 1987)., This specification provides requirements for establishing a nondestructive inspection program for the life cycle of weapons systems, subsystems, parts and materials.
Ident. Num:
MIL-P-46195
Rev. Num:
-
MIL-P-46195, MILITARY SPECIFICATION PROGRAM REQUIREMENTS, NONDESTRUCTIVE INSPECTION, FOR WEAPONS SYSTEMS, SUBSYSTEMS, PARTS AND MATERIALS (13 JUL 1987)., This specification provides requirements for establishing a nondestructive inspection program for the life cycle of weapons systems, subsystems, parts and materials.
MIL-P-46463C, MILITARY SPECIFICATION PRIMER, PERCUSSION, M71A1 PARTS FOR (14 NOV 1966)
MIL-P-46463C, MILITARY SPECIFICATION PRIMER, PERCUSSION, M71A1 PARTS FOR (14 NOV 1966)., This specification covers the parts for one type of percussion primer designated as Primer, Percussion, M71A1.
Ident. Num:
MIL-P-46463
Rev. Num:
C
MIL-P-46463C, MILITARY SPECIFICATION PRIMER, PERCUSSION, M71A1 PARTS FOR (14 NOV 1966)., This specification covers the parts for one type of percussion primer designated as Primer, Percussion, M71A1.
MIL-P-52971 (INTERIM AMENDMENT 1 (ME)), MILITARY SPECIFICATION PALLETS, MATERIAL HANDLING, GENERAL CARGO, 40 X 48 INCH, NON-WOOD, 4-WAY (30 MAR 1987
MIL-P-52971 (INTERIM AMENDMENT 1 (ME)), MILITARY SPECIFICATION PALLETS, MATERIAL HANDLING, GENERAL CARGO, 40 X 48 INCH, NON-WOOD, 4-WAY (30 MAR 1987)., This interim amendment is approved for use within MIL-P-52971 INTERIM AMENDMENT 1 (ME) 30 March 19S7 CARGO , the US Army Belvoir Research, Development, and Engineering Center, Department of the Army, with MIL-P-52971, dated 1 October 1979.
Ident. Num:
MIL-P-52971
Rev. Num:
-
MIL-P-52971 (INTERIM AMENDMENT 1 (ME)), MILITARY SPECIFICATION PALLETS, MATERIAL HANDLING, GENERAL CARGO, 40 X 48 INCH, NON-WOOD, 4-WAY (30 MAR 1987)., This interim amendment is approved for use within MIL-P-52971 INTERIM AMENDMENT 1 (ME) 30 March 19S7 CARGO , the US Army Belvoir Research, Development, and Engineering Center, Department of the Army, with MIL-P-52971, dated 1 October 1979.
MIL-P-52971, MILITARY SPECIFICATION PALLETS, MATERIAL HANDLING, GENERAL CARGO, 40 X 48 INCH, NON-WOOD, 4-WAY (1 OCT 1979)
MIL-P-52971, MILITARY SPECIFICATION PALLETS, MATERIAL HANDLING, GENERAL CARGO, 40 X 48 INCH, NON-WOOD, 4-WAY (1 OCT 1979)., This specification covers performance requirements and design characteristics for reusable, non-wood, 4-way, 40 x 48 inch pallets for military general cargo (see 6.1).
Ident. Num:
MIL-P-52971
Rev. Num:
-
MIL-P-52971, MILITARY SPECIFICATION PALLETS, MATERIAL HANDLING, GENERAL CARGO, 40 X 48 INCH, NON-WOOD, 4-WAY (1 OCT 1979)., This specification covers performance requirements and design characteristics for reusable, non-wood, 4-way, 40 x 48 inch pallets for military general cargo (see 6.1).
MIL-P-5444, MILITARY SPECIFICATION PROPELLER BLADES, GENERAL SPECIFICATION FOR DETACHABLE (LAMINATED VENEER UNCOMPRESSED) (14 DEC 1949)
MIL-P-5444, MILITARY SPECIFICATION PROPELLER BLADES, GENERAL SPECIFICATION FOR DETACHABLE (LAMINATED VENEER UNCOMPRESSED) (14 DEC 1949).,
Ident. Num:
MIL-P-5444
Rev. Num:
-
MIL-P-5444, MILITARY SPECIFICATION PROPELLER BLADES, GENERAL SPECIFICATION FOR DETACHABLE (LAMINATED VENEER UNCOMPRESSED) (14 DEC 1949).,
MIL-P-5518D, MILITARY SPECIFICATION PNEUMATIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION, GENERAL REQUIREMENTS FOR (30 JUN 1993)
MIL-P-5518D, MILITARY SPECIFICATION PNEUMATIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION, GENERAL REQUIREMENTS FOR (30 JUN 1993)., This specification covers the design and installation requirements of aircraft pneumatic systems.
Ident. Num:
MIL-P-5518
Rev. Num:
D
MIL-P-5518D, MILITARY SPECIFICATION PNEUMATIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION, GENERAL REQUIREMENTS FOR (30 JUN 1993)., This specification covers the design and installation requirements of aircraft pneumatic systems.
MIL-P-5673D, MILITARY SPECIFICATION PIN, STRAIGHT, HEADED (31 JAN 1983) (S/S BY NASM5673)
MIL-P-5673D, MILITARY SPECIFICATION PIN, STRAIGHT, HEADED (31 JAN 1983) (S/S BY NASM5673)., This specification establishes the requirements for the manufacture and inspection of one type of straight headed pin.
Ident. Num:
MIL-P-5673
Rev. Num:
D
MIL-P-5673D, MILITARY SPECIFICATION PIN, STRAIGHT, HEADED (31 JAN 1983) (S/S BY NASM5673)., This specification establishes the requirements for the manufacture and inspection of one type of straight headed pin.
MIL-P-7567B, DETAIL SPECIFICATION PARACHUTES, PERSONNEL, DETAIL MANUFACTURING INSTRUCTIONS FOR (28 MAR 1985) [S/S BY MIL-DTL-7567B]
MIL-P-7567B, DETAIL SPECIFICATION PARACHUTES, PERSONNEL, DETAIL MANUFACTURING INSTRUCTIONS FOR (28 MAR 1985) [S/S BY MIL-DTL-7567C]., This specification covers detail instructions relative to the dimensions, tolerances, repair procedures and other specific manufacturing instructions to be used in the assembly of personnel parachutes. The personnel parachutes covered include the chest, seat, back, troop, training, rescue, integrated, maneuverable, and special purpose.
Ident. Num:
MIL-P-7567
Rev. Num:
B
MIL-P-7567B, DETAIL SPECIFICATION PARACHUTES, PERSONNEL, DETAIL MANUFACTURING INSTRUCTIONS FOR (28 MAR 1985) [S/S BY MIL-DTL-7567C]., This specification covers detail instructions relative to the dimensions, tolerances, repair procedures and other specific manufacturing instructions to be used in the assembly of personnel parachutes. The personnel parachutes covered include the chest, seat, back, troop, training, rescue, integrated, maneuverable, and special purpose.
MIL-P-7962D, MILITARY SPECIFICATION PRIMER COATING, CELLULOSE-NITRATE MODIFIED ALKYD TYPE, CORROSION-INHIBITING, FAST-DRYING (FOR SPRAY APPLICATION OVER PRETREATMENT COATING) (12 AUG 1980)
MIL-P-7962D, MILITARY SPECIFICATION PRIMER COATING, CELLULOSE-NITRATE MODIFIED ALKYD TYPE, CORROSION-INHIBITING, FAST-DRYING (FOR SPRAY APPLICATION OVER PRETREATMENT COATING) (12 AUG 1980)., This specification covers the requirements for one grade of corrosion-inhibiting, fast drying spray-type lacquer primer for use only over pretreatment coating conforming to MIL-C-8514. It provides for one composition which is suitable for use under AIR POLLUTION REGULATIONS.
Ident. Num:
MIL-P-7962
Rev. Num:
D
MIL-P-7962D, MILITARY SPECIFICATION PRIMER COATING, CELLULOSE-NITRATE MODIFIED ALKYD TYPE, CORROSION-INHIBITING, FAST-DRYING (FOR SPRAY APPLICATION OVER PRETREATMENT COATING) (12 AUG 1980)., This specification covers the requirements for one grade of corrosion-inhibiting, fast drying spray-type lacquer primer for use only over pretreatment coating conforming to MIL-C-8514. It provides for one composition which is suitable for use under AIR POLLUTION REGULATIONS.
MIL-P-79C (AMENDMENT 1), MILITARY SPECIFICATION, PLASTIC RODS AND TUBES, THERMOSETTING; LAMINATED (10 SEP 1964) [S/S BY MIL-I-24768/8, MIL-I-24768/10, MIL-I-24768/11, MIL-I-24768/12, MIL-I-24768/13, MIL-I-24768/14 & MIL-I-24768/16]
MIL-P-79C (AMENDMENT 1), MILITARY SPECIFICATION, PLASTIC RODS AND TUBES, THERMOSETTING; LAMINATED (10 SEP 1964) [S/S BY MIL-I-24768/8, MIL-I-24768/10, MIL-I-24768/11, MIL-I-24768/12, MIL-I-24768/13, MIL-I-24768/14 & MIL-I-24768/16].
Ident. Num:
MIL-P-79
Rev. Num:
C
MIL-P-79C (AMENDMENT 1), MILITARY SPECIFICATION, PLASTIC RODS AND TUBES, THERMOSETTING; LAMINATED (10 SEP 1964) [S/S BY MIL-I-24768/8, MIL-I-24768/10, MIL-I-24768/11, MIL-I-24768/12, MIL-I-24768/13, MIL-I-24768/14 & MIL-I-24768/16].
MIL-P-79C, MILITARY SPECIFICATION, PLASTIC RODS AND TUBES, THERMOSETTING; LAMINATED (15 JUN 1961) [S/S BY MIL-I-24768/8, MIL-I-24768/10, MIL-I-24768/11, MIL-I-24768/12, MIL-I-24768/13, MIL-I-24768/14 & MIL-I-24768/16]
MIL-P-79C, MILITARY SPECIFICATION, PLASTIC RODS AND TUBES, THERMOSETTING; LAMINATED (15 JUN 1961) [S/S BY MIL-I-24768/8, MIL-I-24768/10, MIL-I-24768/11, MIL-I-24768/12, MIL-I-24768/13, MIL-I-24768/14 & MIL-I-24768/16]., This specification covers the basic characteristics required of laminated thermosetting rods and tubes, and the methods suited to their satisfactory determination. Rods and tubes machined from sheet stock, and other-than-round rods and tubes, are not covered by this specification.
Ident. Num:
MIL-P-79
Rev. Num:
C
MIL-P-79C, MILITARY SPECIFICATION, PLASTIC RODS AND TUBES, THERMOSETTING; LAMINATED (15 JUN 1961) [S/S BY MIL-I-24768/8, MIL-I-24768/10, MIL-I-24768/11, MIL-I-24768/12, MIL-I-24768/13, MIL-I-24768/14 & MIL-I-24768/16]., This specification covers the basic characteristics required of laminated thermosetting rods and tubes, and the methods suited to their satisfactory determination. Rods and tubes machined from sheet stock, and other-than-round rods and tubes, are not covered by this specification.
MIL-P-81728A (AMENDMENT 1), MILITARY SPECIFICATION PLATING, TIN LEAD (ELECTRODEPOSITED) (28 MAR 1980) (S/S BY SAE-AMS-P-81728)
MIL-P-81728A (AMENDMENT 1), MILITARY SPECIFICATION PLATING, TIN LEAD (ELECTRODEPOSITED) (28 MAR 1980) (S/S BY SAE-AMS-P-81728).
Ident. Num:
MIL-P-81728A
Rev. Num:
A
MIL-P-81728A (AMENDMENT 1), MILITARY SPECIFICATION PLATING, TIN LEAD (ELECTRODEPOSITED) (28 MAR 1980) (S/S BY SAE-AMS-P-81728).
MIL-P-81728A, MILITARY SPECIFICATION PLATING, TIN LEAD (ELECTRODEPOSITED) (13 FEB 1973) (S/S BY SAE-AMS-P-81728)
MIL-P-81728A, MILITARY SPECIFICATION PLATING, TIN LEAD (ELECTRODEPOSITED) (13 FEB 1973) (S/S BY SAE-AMS-P-81728)., This specification covers the requirements for electrodeposited tin-lead plating.
Ident. Num:
MIL-P-81728
Rev. Num:
A
MIL-P-81728A, MILITARY SPECIFICATION PLATING, TIN LEAD (ELECTRODEPOSITED) (13 FEB 1973) (S/S BY SAE-AMS-P-81728)., This specification covers the requirements for electrodeposited tin-lead plating.
MIL-P-81985, MILITARY SPECIFICATION PEENING OF METALS (18 OCT 1974)
MIL-P-81985, MILITARY SPECIFICATION PEENING OF METALS (18 OCT 1974)., This specification covers procedures and requirements for dry peening the surfaces of metals by impingement of metallic shot or glass beads for the purpose of increasing the fatigue strength and resistance to stress corrosion cracking by inducing residual compressive stresses in specified surfaces.
Ident. Num:
MIL-P-81985, MILITARY SPECIFICATION PEENING OF MET
Rev. Num:
D
MIL-P-81985, MILITARY SPECIFICATION PEENING OF METALS (18 OCT 1974)., This specification covers procedures and requirements for dry peening the surfaces of metals by impingement of metallic shot or glass beads for the purpose of increasing the fatigue strength and resistance to stress corrosion cracking by inducing residual compressive stresses in specified surfaces.
MIL-P-85582B, MILITARY SPECIFICATION PRIMER COATINGS: EPOXY, WATERBORNE (23 MAY 1994) (S/S BY MIL-PRF-85582C)
MIL-P-85582B, MILITARY SPECIFICATION PRIMER COATINGS: EPOXY, WATERBORNE (23 MAY 1994) (S/S BY MIL-PRF-85582C)., This specification covers the requirements for corrosion inhibiting, chemical and solvent resistant, waterborne, epoxy primer coatings that have a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L) (2.8 pounds per gallon [lb/gal]).
Ident. Num:
MIL-P-85582
Rev. Num:
B
MIL-P-85582B, MILITARY SPECIFICATION PRIMER COATINGS: EPOXY, WATERBORNE (23 MAY 1994) (S/S BY MIL-PRF-85582C)., This specification covers the requirements for corrosion inhibiting, chemical and solvent resistant, waterborne, epoxy primer coatings that have a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L) (2.8 pounds per gallon [lb/gal]).
MIL-P-87089, MILITARY SPECIFICATION PALLETS, MATERIAL HANDLING, MOLDED WOOD PARTICLES 40 X 48 INCH, 4-WAY (30 NOV 1981)
MIL-P-87089, MILITARY SPECIFICATION PALLETS, MATERIAL HANDLING, MOLDED WOOD PARTICLES 40 X 48 INCH, 4-WAY (30 NOV 1981)., This specification covers performance requirements and design characteristics for reusable 4-way, 40x48 inch pallets for military general cargo (see 6.1) molded from composite, chipped-wood particles.
Ident. Num:
MIL-P-87089
Rev. Num:
-
MIL-P-87089, MILITARY SPECIFICATION PALLETS, MATERIAL HANDLING, MOLDED WOOD PARTICLES 40 X 48 INCH, 4-WAY (30 NOV 1981)., This specification covers performance requirements and design characteristics for reusable 4-way, 40x48 inch pallets for military general cargo (see 6.1) molded from composite, chipped-wood particles.
MIL-P-9400C, MILITARY SPECIFICATION PLASTIC LAMINATE AND SANDWICH CONSTRUCTION PARTS AND ASSEMBLY, AIRCRAFT STRUCTURAL, PROCESS SPECIFICATION REQUIREMENTS (14 NOV 1991)
MIL-P-9400C, MILITARY SPECIFICATION PLASTIC LAMINATE AND SANDWICH CONSTRUCTION PARTS AND ASSEMBLY, AIRCRAFT STRUCTURAL, PROCESS SPECIFICATION REQUIREMENTS (14 NOV 1991)., This specification provides detailed instructions for the preparation of, and requirements to be included in, process specifications required for the processing, inspection, pre-fit, and assembly of structural plastic laminate and sandwich construction parts for aircraft.
Ident. Num:
MIL-P-9400
Rev. Num:
C
MIL-P-9400C, MILITARY SPECIFICATION PLASTIC LAMINATE AND SANDWICH CONSTRUCTION PARTS AND ASSEMBLY, AIRCRAFT STRUCTURAL, PROCESS SPECIFICATION REQUIREMENTS (14 NOV 1991)., This specification provides detailed instructions for the preparation of, and requirements to be included in, process specifications required for the processing, inspection, pre-fit, and assembly of structural plastic laminate and sandwich construction parts for aircraft.
