Your free source for specifications, standards, and handbooks
MIL SPECS (MIL-H)
MIL-H-22868 (WEP), MILITARY SPECIFICATION HYDROGEN PEROXIDE, E-STABILIZED, 70% AND 90% (FOR TORPEDO USE)
MIL-H-22868 (WEP), MILITARY SPECIFICATION HYDROGEN PEROXIDE, E-STABILIZED, 70% AND 90% (FOR TORPEDO USE). This specification covers aqueous solutions of hydrogen peroxide in which additives have been dissolved to impart a low decomposition rate, to repress the effects of an accidental catalytic contamination, and to prevent corrosion of aluminum containers. Such hydrogen peroxide solutions are designated as "E" stabilized.
Ident. Num:
MIL-H-22868
MIL-H-22868 (WEP), MILITARY SPECIFICATION HYDROGEN PEROXIDE, E-STABILIZED, 70% AND 90% (FOR TORPEDO USE). This specification covers aqueous solutions of hydrogen peroxide in which additives have been dissolved to impart a low decomposition rate, to repress the effects of an accidental catalytic contamination, and to prevent corrosion of aluminum containers. Such hydrogen peroxide solutions are designated as "E" stabilized.
MIL-H-25579E, MILITARY SPECIFICATION HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR (24 JAN 1985
MIL-H-25579E, MILITARY SPECIFICATION HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR (24 JAN 1985)., This specification contains the requirements for medium pressure, high temperature, polytetrafluoroethylene (PTFE) hose assemblies, reinforced with a corrosion-resistant steel (CRES) wire braid for use in fuel, lubricating oil, water-alcohol, hydraulics and pneumatic systems within the limits specified herein.
Ident. Num:
MIL-H-25579
Rev. Num:
E
MIL-H-25579E, MILITARY SPECIFICATION HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR (24 JAN 1985)., This specification contains the requirements for medium pressure, high temperature, polytetrafluoroethylene (PTFE) hose assemblies, reinforced with a corrosion-resistant steel (CRES) wire braid for use in fuel, lubricating oil, water-alcohol, hydraulics and pneumatic systems within the limits specified herein.
MIL-H-26626D, MILITARY SPECIFICATION HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN (1 NOV 1991)
MIL-H-26626D, MILITARY SPECIFICATION HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN (1 NOV 1991)., This specification covers reinforced cryogenic oxygen hose assemblies with flared tube style fittings.
Ident. Num:
MIL-H-26626
Rev. Num:
D
MIL-H-26626D, MILITARY SPECIFICATION HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN (1 NOV 1991)., This specification covers reinforced cryogenic oxygen hose assemblies with flared tube style fittings.
MIL-H-5440H, MILITARY SPECIFICATION HYDRAULIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION REQUIREMENTS FOR (25 MAY 1993)
MIL-H-5440H, MILITARY SPECIFICATION HYDRAULIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION REQUIREMENTS FOR (25 MAY 1993)., This specification covers the design and installation requirements for Types I and II aircraft hydraulic systems.
Ident. Num:
MIL-H-5440
Rev. Num:
H
MIL-H-5440H, MILITARY SPECIFICATION HYDRAULIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION REQUIREMENTS FOR (25 MAY 1993)., This specification covers the design and installation requirements for Types I and II aircraft hydraulic systems.
MIL-H-5606G, PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (9 SEP 1994)
MIL-H-5606G, PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (9 SEP 1994)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54°C to +135°C temperature range (see 6.1). This fluid is identified by military symbol OHA and NATO Code No. H-515 (see 6.5).
Ident. Num:
MIL-H-5606
Rev. Num:
G
MIL-H-5606G, PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (9 SEP 1994)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54°C to +135°C temperature range (see 6.1). This fluid is identified by military symbol OHA and NATO Code No. H-515 (see 6.5).
MIL-H-6000B, DETAIL SPECIFICATION HOSE, RUBBER, AIRCRAFT, FUEL, OIL, COOLANT, WATER, AND ALCOHOL (22 MAR 1982)
MIL-H-6000B, DETAIL SPECIFICATION HOSE, RUBBER, AIRCRAFT, FUEL, OIL, COOLANT, WATER, AND ALCOHOL (22 MAR 1982)., This specification covers one type of hose for use in fuel, oil, coolant, water, and for alcohol lines in engine installations.
Ident. Num:
MIL-H-6000
Rev. Num:
B
MIL-H-6000B, DETAIL SPECIFICATION HOSE, RUBBER, AIRCRAFT, FUEL, OIL, COOLANT, WATER, AND ALCOHOL (22 MAR 1982)., This specification covers one type of hose for use in fuel, oil, coolant, water, and for alcohol lines in engine installations.
MIL-H-6088G (AMENDMENT 1), MILITARY SPECIFICATION HEAT TREATMENT OF ALUMINUM ALLOYS (15 SEP 1992) (S/S BY SAE-AMS-H-6088)
MIL-H-6088G (AMENDMENT 1), MILITARY SPECIFICATION HEAT TREATMENT OF ALUMINUM ALLOYS (15 SEP 1992) (S/S BY SAE-AMS-H-6088).
Ident. Num:
MIL-H-6088
Rev. Num:
G
MIL-H-6088G (AMENDMENT 1), MILITARY SPECIFICATION HEAT TREATMENT OF ALUMINUM ALLOYS (15 SEP 1992) (S/S BY SAE-AMS-H-6088).
MIL-H-6088G, MILITARY SPECIFICATION HEAT TREATMENT OF ALUMINUM ALLOYS (1 APR 1991) (S/S BY SAE-AMS-H-6088)
MIL-H-6088G, MILITARY SPECIFICATION HEAT TREATMENT OF ALUMINUM ALLOYS (1 APR 1991) (S/S BY SAE-AMS-H-6088)., This specification covers the requirements and recommendations for the heat treatment of aluminum alloy rolled, extruded, forged, drawn, and cast product (see 6.1 and 6.5.1). It does not cover the requirements for the heat treatment of aluminum alloy parts (see 3.4).
Ident. Num:
MIL-H-6088
Rev. Num:
G
MIL-H-6088G, MILITARY SPECIFICATION HEAT TREATMENT OF ALUMINUM ALLOYS (1 APR 1991) (S/S BY SAE-AMS-H-6088)., This specification covers the requirements and recommendations for the heat treatment of aluminum alloy rolled, extruded, forged, drawn, and cast product (see 6.1 and 6.5.1). It does not cover the requirements for the heat treatment of aluminum alloy parts (see 3.4).
MIL-H-6875H (AMENDMENT 1), MILITARY SPECIFICATION HEAT TREATMENT OF STEEL, PROCESS FOR (16 JULY 1993)
MIL-H-6875H (AMENDMENT 1), MILITARY SPECIFICATION HEAT TREATMENT OF STEEL, PROCESS FOR (16 JULY 1993)., This amendment forms a part of MIL-H-6875H, dated 1 March 1989, and is approved for use by all Departments and Agencies of the Department of Defense.
Ident. Num:
MIL-H-6875
Rev. Num:
H
MIL-H-6875H (AMENDMENT 1), MILITARY SPECIFICATION HEAT TREATMENT OF STEEL, PROCESS FOR (16 JULY 1993)., This amendment forms a part of MIL-H-6875H, dated 1 March 1989, and is approved for use by all Departments and Agencies of the Department of Defense.
MIL-H-6875H (AMENDMENT 2), MILITARY SPECIFICATION HEAT TREATMENT OF STEEL, PROCESS FOR (27 OCT 1998)
MIL-H-6875H (AMENDMENT 2), MILITARY SPECIFICATION HEAT TREATMENT OF STEEL, PROCESS FOR (27 OCT 1998)., This amendment forms a part of MIL-H-6875H, dated 1 March 1989, and is approved for use by all Departments and Agencies of the Department of Defense.
Ident. Num:
MIL-H-6875
Rev. Num:
H
MIL-H-6875H (AMENDMENT 2), MILITARY SPECIFICATION HEAT TREATMENT OF STEEL, PROCESS FOR (27 OCT 1998)., This amendment forms a part of MIL-H-6875H, dated 1 March 1989, and is approved for use by all Departments and Agencies of the Department of Defense.
MIL-H-6875H (NOTICE 1), MILITARY SPECIFICATION HEAT TREATMENT OF STEEL RAW MATERIALS (2 FEB 1999) (S/S BY SAE-AMS-H-6875)
MIL-H-6875H (NOTICE 1), MILITARY SPECIFICATION HEAT TREATMENT OF STEEL RAW MATERIALS (2 FEB 1999) (S/S BY SAE-AMS-H-6875)., Mil-H-6875H, dated 1 March 198 9, along with amendment 2 dated 27 October 1998, is hereby cancelled. Future acquisitions should refer to SAE-AMS-H-6875, “Heat Treatment of Steel raw materials.” (Applications for copies of SAE publications should be addressed to the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001).
Ident. Num:
MIL-H-6875
Rev. Num:
H
MIL-H-6875H (NOTICE 1), MILITARY SPECIFICATION HEAT TREATMENT OF STEEL RAW MATERIALS (2 FEB 1999) (S/S BY SAE-AMS-H-6875)., Mil-H-6875H, dated 1 March 198 9, along with amendment 2 dated 27 October 1998, is hereby cancelled. Future acquisitions should refer to SAE-AMS-H-6875, “Heat Treatment of Steel raw materials.” (Applications for copies of SAE publications should be addressed to the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001).
MIL-H-6875H, MILITARY SPECIFICATION HEAT TREATMENT OF STEEL, PROCESS FOR (1 MAR 1989)
MIL-H-6875H, MILITARY SPECIFICATION HEAT TREATMENT OF STEEL, PROCESS FOR (1 MAR 1989)., This specification covers the requirements for heat-treatment of four classes of steel (see 1.2) and the requirements for furnace equipment, test procedures and information for heat-treating procedures, heat-treating temperatures and material (see 6.11) test procedures.
Ident. Num:
MIL-H-6875
Rev. Num:
H
MIL-H-6875H, MILITARY SPECIFICATION HEAT TREATMENT OF STEEL, PROCESS FOR (1 MAR 1989)., This specification covers the requirements for heat-treatment of four classes of steel (see 1.2) and the requirements for furnace equipment, test procedures and information for heat-treating procedures, heat-treating temperatures and material (see 6.11) test procedures.
MIL-H-81200B, MILITARY SPECIFICATION HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS (13 JAN 1991)
MIL-H-81200B, MILITARY SPECIFICATION HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS (13 JAN 1991) (S/S BY SAE-AMS-H-81200B)., This specification covers the heat treatment of titanium and titanium alloy products, including wrought and cast products, by material producers. This specification also covers furnace equipment requirements, test procedures, and general information for heat treating procedures, heat treating temperatures, and material test procedures for the heat treatment of titanium and titanium alloys.
Ident. Num:
MIL-H-81200
Rev. Num:
B
MIL-H-81200B, MILITARY SPECIFICATION HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS (13 JAN 1991) (S/S BY SAE-AMS-H-81200B)., This specification covers the heat treatment of titanium and titanium alloy products, including wrought and cast products, by material producers. This specification also covers furnace equipment requirements, test procedures, and general information for heat treating procedures, heat treating temperatures, and material test procedures for the heat treatment of titanium and titanium alloys.
MIL-H-83282C, PERFORMANCE SPECIFICATION HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 (25 MAR 1986) (S/S
MIL-H-83282C, PERFORMANCE SPECIFICATION HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 (25 MAR 1986) (S/S BY MIL-PRF-83282D)., This specification covers the requirements for a synthetic hydrocarbon-base hydraulic fluid for use in the temperature range of -40° to +205°C. This hydraulic fluid is identified by NATO Code Number H-537 (see 6.6).
Ident. Num:
MIL-H-83282
Rev. Num:
D
MIL-H-83282C, PERFORMANCE SPECIFICATION HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 (25 MAR 1986) (S/S BY MIL-PRF-83282D)., This specification covers the requirements for a synthetic hydrocarbon-base hydraulic fluid for use in the temperature range of -40° to +205°C. This hydraulic fluid is identified by NATO Code Number H-537 (see 6.6).
MIL-H-8891A, HYDRAULIC SYSTEMS, MANNED FLIGHT VEHICLES, TYPE III DESIGN, INSTALLATION AND DATA REQUIREMENTS FOR, GENERAL SPECIFICATION FOR (23 JAN 197
MIL-H-8891A, HYDRAULIC SYSTEMS, MANNED FLIGHT VEHICLES, TYPE III DESIGN, INSTALLATION AND DATA REQUIREMENTS FOR, GENERAL SPECIFICATION FOR (23 JAN 1978)., This specification covers the design and installation requirements for Type III manned flight vehicle hydraulic systems.
Ident. Num:
MIL-H-8891
Rev. Num:
A
MIL-H-8891A, HYDRAULIC SYSTEMS, MANNED FLIGHT VEHICLES, TYPE III DESIGN, INSTALLATION AND DATA REQUIREMENTS FOR, GENERAL SPECIFICATION FOR (23 JAN 1978)., This specification covers the design and installation requirements for Type III manned flight vehicle hydraulic systems.
