MIL-G-1175B (NOTICE 1), MILITARY SPECIFICATION GUN, SUBMACHINE, CALIBER .45, M3A1 (18 APR 1986)Ident. Num:
MIL-G-1175
Rev. Num:
B
MIL-G-1175B (NOTICE 1), MILITARY SPECIFICATION GUN, SUBMACHINE, CALIBER .45, M3A1 (18 APR 1986)., This notice should be filed in front of MIL-G-1175B, dated 13 March 1968.
MIL-G-1175B has been reviewed and determined to be valid for use in acquisition.
MIL-G-1175B, MILITARY SPECIFICATION GUN, SUBMACHINE, CALIBER .45, M3A1 (13 MAR 1968)Ident. Num:
MIL-G-1175
Rev. Num:
B
MIL-G-1175B, MILITARY SPECIFICATION GUN, SUBMACHINE, CALIBER .45, M3A1 (13 MAR 1968)., 1.1 This specification covers one type of fully automatic, air-cooled, blowback operated, magazine fed, submachinegun.
MIL-G-174B, DETAIL SPECIFICATION GLASS, OPTICALIdent. Num:
MIL-G-174
Rev. Num:
B
MIL-G-174B, DETAIL SPECIFICATION GLASS, OPTICAL. This specification establishes the requirements for optical glass to be used in the fabrication of optical elements.
MIL-G-21164D, MILITARY SPECIFICATION, GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES, NATO CODE NUMBER G-353 (8 DEC 1981)Ident. Num:
MIL-G-21164
Rev. Num:
D
MIL-G-21164D, MILITARY SPECIFICATION, GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES, NATO CODE NUMBER G-353 (8 DEC 1981)., This specification covers the requirements for one grade of low and high temperature molybdenum disulfide grease for use as a lubricant on heavily loaded sliding steel surfaces. This grease is identified by NATO Symbol G-353 Military Symbol GMD.
MIL-G-24696B, MILITARY SPECIFICATION, GASKET, SHEET, NON-ASBESTOS (25 MAY 1995)Ident. Num:
MIL-G-24696
Rev. Num:
B
MIL-G-24696B, MILITARY SPECIFICATION, GASKET, SHEET, NON-ASBESTOS (25 MAY 1995)., This specification establishes the requirements of non-asbestos sheet gasket material for non-propulsion and propulsion steam and water applications and for all petroleum based hydraulic oil applications.
MIL-G-25013E, MILITARY SPECIFICATION, GREASE, AIRCRAFT, BALL AND ROLLER BEARING, NATO CODE NUMBER G-372 (20 JUN 1983)Ident. Num:
MIL-G-25013
Rev. Num:
E
MIL-G-25013E, MILITARY SPECIFICATION, GREASE, AIRCRAFT, BALL AND ROLLER BEARING, NATO CODE NUMBER G-372 (20 JUN 1983)., This specification covers the requirements for one grade of grease for use in anti-friction bearings where operation of low torque equipment will require lubrication for extended periods at temperatures as low as -73 Degrees C and as high as 232 Degrees C. This grease is identified by NATO symbol G-372 (see 6.5).
MIL-G-25871B, MILITARY SPECIFICATION, GLASS, LAMINATED, AIRCRAFT GLAZING (27 NOV 1978) (S/S BY SAE-AMS-G-25871)Ident. Num:
MIL-G-25871
Rev. Num:
B
MIL-G-25871B, MILITARY SPECIFICATION, GLASS, LAMINATED, AIRCRAFT GLAZING (27 NOV 1978) (S/S BY SAE-AMS-G-25871)., This specification covers laminated glass, ready-cut, with various types of edge attachments, for use in aircraft glazing.
MIL-G-3036C, MILITARY SPECIFICATION GROMMET, ELASTIC, HOT OIL AND COOLANT RESISTANT (20 MAR 1978) [S/S BY NASM3036]Ident. Num:
MIL-G-3036
Rev. Num:
C
MIL-G-3036C, MILITARY SPECIFICATION GROMMET, ELASTIC, HOT OIL AND COOLANT RESISTANT (20 MAR 1978) [S/S BY NASM3036]., This specification covers two compositions of grommet suitable for use in applications requiring resistance to hot petroleum-based opil, coolant, fungus or ozone, and for use in less severe applications.
MIL-G-45185 (INTERIM AMENDMENT 4), GUN, AUTOMATIC, 20-MM, M39A2 (W/REPAIR PARTS AND W/O EQUIPMENT OR ACCESSORIES) (6 JUN 1967)Ident. Num:
MIL-G-45185
Rev. Num:
-
MIL-G-45185 (INTERIM AMENDMENT 4), GUN, AUTOMATIC, 20-MM, M39A2 (W/REPAIR PARTS AND W/O EQUIPMENT OR ACCESSORIES) (6 JUN 1967)., This Interim Amendment is issued for use by the
Department of the Army with Military Specification
MIL-G-45185, dated 16 October 1958.
MIL-G-45185, GUN, AUTOMATIC, 20-MM, M39A2 (W/REPAIR PARTS AND W/O EQUIPMENT OR ACCESSORIES) (16 OCT 1958)Ident. Num:
MIL-G-45185
Rev. Num:
-
MIL-G-45185, GUN, AUTOMATIC, 20-MM, M39A2 (W/REPAIR PARTS AND W/O EQUIPMENT OR ACCESSORIES) (16 OCT 1958)., This specification covers the requirements
for one type of 20-MM gas operated,
belt fed, electrically fired, revolver type
weapon that may be adapted to either right
hand or left hand feed (see 6.1).
MIL-G-45204C (NOTICE 1), MILITARY SPECIFICATION GOLD PLATING, ELECTRODEPOSITED (7 APRIL 1998)Ident. Num:
MIL-G-45204
Rev. Num:
C
MIL-G-45204C (NOTICE 1), MILITARY SPECIFICATION GOLD PLATING, ELECTRODEPOSITED (7 APRIL 1998)., MIL-G-45204C, dated 7 June 1983, and AMENDMENT 3, dated 9 June 1993, are hereby canceled. Users may consult the appropriate portions of AMS 2422, "Plating, Gold" and/or ASTM B488,
“Electrodeposited Coatings of Gold for Engineering Uses” as
possible replacements. Users are cautioned to evaluate AMS 2422 and
ASTM B488 for their particular application before citing them as
replacement documents.
(Application for copies of AMS publications should be
addressed to the Society of Automotive Engineers, Inc. (SAE), 400
Commonwealth Drive, Warrendale, PA 15096.)
(Application for copies of ASTM publications should be
addressed to the American Society for Testing and Materials, 100
Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
MIL-G-45204C (NOTICE 2), MILITARY SPECIFICATION, GOLD PLATING, ELECTRODEPOSITED (28 JUNE 2007)Ident. Num:
MIL-G-45204
Rev. Num:
C
MIL-G-45204C (NOTICE 2), MILITARY SPECIFICATION, GOLD PLATING, ELECTRODEPOSITED (28 JUNE 2007)., MIL-G-45204C, dated 7 June 1983, including Amendment 3, dated 9 June 1993, are hereby reinstated and may be used for acquisition.
MIL-G-81827A, MILITARY SPECIFICATION, GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE (24 JAN 1983)Ident. Num:
MIL-G-81827
Rev. Num:
A
MIL-G-81827A, MILITARY SPECIFICATION, GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE (24 JAN 1983)., This specification covers the requirements for one grade of grease for use as a lubricant on heavily loaded sliding steel surfaces.