MIL-F-1183 (NOTICE 1), MILITARY STANDARD WELDING, GAS. STEELS, CONSTRUCTIONAL, READILY WELDABLE, FOR LOW-STRESSED JOINTS (9 JUL 1996) (S/S BY AWS-D1.3)., MIL-STD-1183(AT), dated 12 December 1978, is hereby cancelled. Future acquisitions should refer to American Welding Society (AWS) D 1.3 “Structural Welding Code-Sheet Steel”.

MIL-F-1183, MILITARY STANDARD WELDING, GAS. STEELS, CONSTRUCTIONAL, READILY WELDABLE, FOR LOW-STRESSED JOINTS (12 DEC 1978)., This standard covers oxy-acetylene gas welding of readily weldable constructional steels when joint strength is not a consideration in the function of the part.

MIL-F-13926B (AMENDMENT 5), MILITARY SPECIFICATION, FIRE CONTROL MATERIAL, MANUFACTURE AND INSPECTION, GENERAL SPECIFICATION FOR, (8 JUL 1991) [SUPERSEDING MIL-F-13926A, MIL-F-45133B & MIL-STD-1242].

MIL-F-13926B, MILITARY SPECIFICATION, FIRE CONTROL MATERIAL, MANUFACTURE AND INSPECTION, GENERAL SPECIFICATION FOR, (26 MAR 1984) [SUPERSEDING MIL-F-13926A, MIL-F-45133B & MIL-STD-1242]., This specification covers the general requirements for the procurement, manufacture and inspection of systems, components,a and assemblies used in fire control material.

MIL-F-13927A (AMENDMENT 3), MILITARY SPECIFICATION, FUNGUS RESISTANCE TEST, AUTOMOTIVE COMPONENTS (25 APR 1983) [S/S BY ASTM-G21].

MIL-F-13927A, MILITARY SPECIFICATION, FUNGUS RESISTANCE TEST, AUTOMOTIVE COMPONENTS (22 AUG 1957) [S/S BY ASTM-G21]., This specification covers methods of treating automotive components for resistance to fungus attack to determine conformance to requirements specified in the item specification.

MIL-F-14072D (ER), DETAIL SPECIFICATION FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT (16 AUG 1984)(S/S BY MIL-DTL-14072E)., This specification covers requirements for finishes necessary to protect ground electronic equipment from the deteriorating effects of climatic conditions encountered in military use.

MIL-F-14252 (AMENDMENT 2), MILITARY SPECIFICATION, FIRE CONTROL MATERIEL, GENERAL SPECIFICATION GOVERNING THE DESIGN AND INSPECTION OF (24 FEB 1959)., This amendment forms a part of Military Specification MIL-F-14252, 14 February 1956.

MIL-F-14252, MILITARY SPECIFICATION, FIRE CONTROL MATERIEL, GENERAL SPECIFICATION GOVERNING THE DESIGN AND INSPECTION OF (14 FEB 1956)., This specification covers general requirements for the design and inspection of fire-control material.

MIL-F-14256F (AMENDMENT 1), MILITARY SPECIFICATION FLUX, SOLDERING, LIQUID, PASTE FLUX, SOLDER PASTE AND SOLDER-PASTE FLUX, (FOR ELECTRONIC/ELECTRICAL USE), GENERAL SPECIFICATION FOR (18 MAY 1994) [S/S BY J-STD-004, J-STD-005 AND J-STD-006].

MIL-F-14256F, MILITARY SPECIFICATION FLUX, SOLDERING, LIQUID, PASTE FLUX, SOLDER PASTE AND SOLDER-PASTE FLUX, (FOR ELECTRONIC/ELECTRICAL USE), GENERAL SPECIFICATION FOR (26 APR 1993) [S/S BY J-STD-004, J-STD-005 AND J-STD-006]., This specification covers liquid fluxes, paste flux and solder-past flux used in the preparation of solder joints for electrical/electronic circuits.

MIL-F-16377G, DETAIL SPECIFICATION FIXTURES, LIGHTING; AND ASSOCIATED PARTS; SHIPBOARD USE, GENERAL SPECIFICATION FOR (5 JUN 1981)., This specification covers fluorescent and incandescent lighting fixtures (lights) and associated parts. used for detail and general illumination on Naval ships and boats.

MIL-F-17874B (AMENDMENT 1), MILITARY SPECIFICATION FUEL SYSTEMS, AIRCRAFT, INSTALLATION AND TEST OF (12 AUG 1985).

MIL-F-17874B, MILITARY SPECIFICATION FUEL SYSTEMS, AIRCRAFT, INSTALLATION AND TEST OF (20 AUG 1965)., This specification covers the general requirements for functional operation, installation, and testing of fuel systems for all piloted aircraft, target drones and guided missiles, and shall be followed except as otherwise authorized by the procuring activity for each design.

MIL-F-18113E (NOTICE 1), MILITARY SPECIFICATION, FEEDERS, BOILERS WATER TREATMENT, BY-PASS AND COMPOUND RECEIVER TYPES (21 APR 1997), Military Specification MIL-F-18113E, dated 11 May 1992, is hereby canceled. Future acquisition of this material should refer to Federal Specification F-F-2901.

MIL-F-18240E, DETAIL SPECIFICATION FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250°F MAXIMUM (1 DEC 1989) [S/S BY MIL-DTL-18240F)., This specification defines the requirements for self-locking elements for use in externally threaded fasteners such as bolts and screws to be used in fasteners with either UNC, UNJC, UNF, UNJF, UNRC or UNRF threads and where the temperatures will not exceed 250°F.

MIL-F-18372, MILITARY SPECIFICATION, FLIGHT CONTROL SYSTEMS: DESIGN, INSTALLATION AND TEST OF, AIRCRAFT (GENERAL SPECIFICATION FOR) (31 MAR 1955) [SUPERSEDING SR-169A]., This specification covers the general requirements for the design, installation, and test of flight control systems for all types of piloted aircraft contracted for by the U. S. Navy. (Power plant controls are excluded).

MIL-F-18866H, MILITARY SPECIFICATION, FITTING, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL (6 MAY 1987) [S/S BY SAE-J514]., This specification covers 37 degree flared and flareless steel tube fittings, 1500 and 3000 pounds per square inch (psi) maximum design pressure, -65 Deg to 250 Deg Fahrenheit temperature range, for use in hydraulic or air systems.

MIL-F-18870E (AMENDMENT 1), MILITARY SPECIFICATION, FIRE CONTROL EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION (23 MAY 1986)., This amendment forms a part of Military Specification MIL-F-18870E(OS), dated 25 April 1975, and is approved for use within the Naval Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.

MIL-F-18870E, MILITARY SPECIFICATION, FIRE CONTROL EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION (25 APR 1975)., This specification covers the Common requirements for the procurement of fire control equipment to be used in Naval shipboard weapon systems. Such equipment may be a complete system or a part of such a system.

MIL-F-19700A (SH), MILITARY SPECIFICATION FASTENERS, SCREW THREADED, AND RELATED ITEMS, NON-MAGNETIC (12 NOV 1987)., This specification describes the characteristics of nonmagnetic, screw threaded fasteners and related items that are dimensionally in conformance to recognized Military and industrial standards. The intent of this specification is to supplement,not supersede,the specifications normally used for the acquisition of threaded fasteners and related items

MIL-F-22606C(SH)_AMENDMENT-1, MILITARY SPECIFICATION, FLASK COMPRESSED GAS AND END PLUGS FOR AIR, OXYGEN AND NITROGEN (17 SEP 1993)., This amendment forms a part of Military Specification MIL_F_22606(SH), dated 22 August 1992 and is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.

MIL-F-24385F(SH)(AMENDMENT 1),MILITARY SPECIFICATION, FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEAWATER (5 AUG 1994), This amendment forms a part of MIL-F-24385F(SH), dated 07 January 1992 and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-F-25173A, MILITARY SPECIFICATION FASTENER, CONTROL PANEL, AIRCRAFT EQUIPMENT (16 FEB 1956)., This specification covers one type of control panel fastener.

MIL-F-29177A (NOTICE 1), MILITARY SPECIFICATION, FILTER, AIR-EXTENDED AREA, INITIAL INSTALLATION (17 JAN 1992) [S/S BY F-F-2790]., MIL-F-29177A, dated 8 March 1985, is hereby canceled. Future acquisition of this material should refer to F-F-2790.

MIL-F-3541C (SUPPLEMENT 1), MILITARY SPECIFICATION FITTINGS, LUBRICATION, GENERAL SPECIFICATION FOR (3 MAR 1989) [S/S BY SAE-AS35411].

MIL-F-3541C, MILITARY SPECIFICATION FITTINGS, LUBRICATION, GENERAL SPECIFICATION FOR (28 FEB 1989) [S/S BY SAE-AS35411]., This specification covers threaded lubrication fittings to be used for admitting and retaining lubricants supplied by pressure lubricating equipment

MIL-F-37618B, MILITARY SPECIFICATION, FRAME, SPECTACLE, GOLD PLATED, BAYONET TEMPLES (15 JUN 1990)., This specification covers one type and size of all metal gold plated spectacle sunglass frames with plastic tipped, bayonet type temples, 42 by 52 eye, 20 bridge.

MIL-F-38762 (AMENDMENT 1), MILITARY STANDARD, FLUORESCENT PENETRANT INSPECTION UNITS (26 APR 1966).

MIL-F-38762, MILITARY STANDARD, FLUORESCENT PENETRANT INSPECTION UNITS (26 APR 1966)., This specification covers three types of fluorescent penetrant inspection units.

MIL-F-43402D (SH) (INTERIM AMENDMENT 3) , MILITARY SPECIFICATION, FOOD CUTTER, ELECTRIC (29 OCT 1992)., This interim amendment is approved for use within the Naval Sea Systems Command, Department of the Navy, with MIL-F-43402D, dated 30 December 1982.

MIL-F-44422, MILITARY SPECIFICATION, FIBER ROPE ASSEMBLY, INSERTION/EXTRACTION (27 DEC 1990)., This specification covers a fiber rope assembly (see 6.1).

MIL-F-46032A, MILITARY SPECIFICATION, FUNGUS-RESISTANT TREATMENT FOR SANDBAGS; COPPER PROCESSES (26 NOV 1971)., This specification covers the processing of sandbags with copper compounds for protection against fugus attack. These processes are not intended for application to materials which will come into frequent contact with a person's skin

MIL-F-46851C, MILITARY SPECIFICATION, FANS, GUIDED MISSILE, GROUND SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR (21 SEP 1993) [SUPERSEDING MIL-E-46S5IB]., This specification covers the general requirements for three types of general purpose, air circulation fans to be used within the ground support equipment of a guided missile system.

MIL-F-48616 (AMENDMENT 2), MILITARY SPECIFICATION, FILTER (COATINGS), INFRARED INTERFERENCE, GENERAL SPECIFICATION FOR (28 JAN 1985).

MIL-F-48616, MILITARY SPECIFICATION, FILTER (COATINGS), INFRARED INTERFERENCE, GENERAL SPECIFICATION FOR (29 JUL 1977)., This specification establishes general performance and durability requirements for this film coated optical elements which are used in the spectral region from 0.7 um to 50.0 um (see 6.1).

MIL-F-495E (AMENDMENT 1), MILITARY SPECIFICATION FINISH, CHEMICAL, BLACK, FOR COPPER ALLOYS (5 FEB 1990)., This amendment forms a part of MIL-F-495, dated 30 SEPTEMBER 1988, and is approved for use by all Departments and Agencies of the Department of Defense

MIL-F-495E (NOTICE 1), MILITARY SPECIFICATION FINISH, CHEMICAL, BLACK, FOR COPPER ALLOYS (24 SEPT 1999)., MIL-F-495E, including Amendment 1, dated 5 February 1990, is hereby canceled without replacement.

MIL-F-495E (NOTICE 2), MILITARY SPECIFICATION FINISH, CHEMICAL, BLACK, FOR COPPER ALLOYS (19 JAN 2001)., MIL-F-495E, including Amendment 1, dated 5 February 1990, is hereby reinstated and may be used for acquisition.

MIL-F-495E, MILITARY SPECIFICATION FINISH, CHEMICAL, BLACK, FOR COPPER ALLOYS (30 SEPT 1988)., This specification covers a black chemical finish for copper alloys.

MIL-F-51079D (NOTICE 2), MILITARY SPECIFICATION, FILTER MEDIUM, FIRE-RESISTANT, HIGH-EFFICIENCY (10 DEC 1998)., MIL-F-51079D, dated 14 March 1985, with Interim Amendment 1, dated 17 February 1988, is hereby canceled. Future acquisitions should refer to Appendix FC-I of American Society of Mechanical Engineers (ASME) AG-1- Code on Nuclear Air and Gas Treatment.

MIL-F-51184A, MILITARY SPECIFICATION, FASTENERS, SNAP (19 JAN 1973).

MIL-F-5509D (AMENDMENT 4), MILITARY SPECIFICATION FITTINGS, FLARED TUBE, FLUID CONNECTION (30 NOV 1987) [SUPERSEDING MIL-L-5509C] [SEE NOTICE 2 FOR ADDITIONAL SUPERSEDING INFORMATION].

MIL-F-5509D (NOTICE 1), MILITARY SPECIFICATION FITTINGS, FLARED TUBE, FLUID CONNECTION (20 DEC 1996) [SUPERSEDING MIL-L-5509C] [SEE NOTICE 2 FOR ADDITIONAL SUPERSEDING INFORMATION]., MIL-F-5509D(4), dated 30 November 1987; and MIL-F-5509D, Supplement 1, dated 16 June 1978, are hereby canceled. Future acquisitions for these products should refer to the following standard(s) as applicable to the specific fittings. Each replacement standard cites superseding information for known fittings that have MIL-F-5509 designated as a procurement specification:

MIL-F-5509D (NOTICE 2), MILITARY SPECIFICATION FITTINGS, FLARED TUBE, FLUID CONNECTION (30 SEP 1998) [SUPERSEDING MIL-L-5509C] [SEE NOTICE 2 FOR ADDITIONAL SUPERSEDING INFORMATION]., MIL-F-5509D(4), dated 30 November 1987; and MIL-F-5509D, Supplement 1, dated 16 June 1978, are hereby canceled. Future acquisitions for these products should refer to the following standard(s) as applicable to the specific fittings. Each replacement standard cites superseding information for known fittings that have MIL-F-5509 designated as a procurement specification. The attached cross-reference listing is provided to indicate which AN or MS from MIL-F-5509D, Supplement 1, applies to the superseding procurement specifications.

MIL-F-5509D (SUPPLEMENT 1), MILITARY SPECIFICATION FITTINGS, FLARED TUBE, FLUID CONNECTION (16 JUN 1978) [SUPERSEDING MIL-L-5509C] [SEE NOTICE 2 FOR ADDITIONAL SUPERSEDING INFORMATION].

MIL-F-5509D, MILITARY SPECIFICATION FITTINGS, FLARED TUBE, FLUID CONNECTION (16 JUN 1978) [SUPERSEDING MIL-L-5509C] [SEE NOTICE 2 FOR ADDITIONAL SUPERSEDING INFORMATION]., This specification establishes the requirements for flared tube, pipe threaded and beaded type fluid connection fittings for use in all types of fluid systems. (see 6.1)

MIL-F-5591C (AMENDMENT 1), FASTENERS; PANEL; NONSTRUCTURAL (20 JUN 1988) [S/S BY NASM5591]., This amendment forms a part of MIL-F-5591C,dated 23 July 1986, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-F-5591C (AMENDMENT 2), MILITARY SPECIFICATION, FASTENERS; PANEL; NONSTRUCTURAL (15 DEC 1999) [S/S BY NASM5591].

MIL-F-5591C, MILITARY SPECIFICATION, FASTENERS; PANEL; NONSTRUCTURAL (23 JUL 1986) [S/S BY NASM5591]., This specification covers nonstructural panel fasteners used on internal or external parts of a aircraft

MIL-F-6001A (ASG), MILITARY STANDARD FITTING, AIRCRAFT, SOLDER TYPE, TUBE (15 JUL 1958)., This specification covers one type of tube fitting known as the solder type.

MIL-F-62668, MILITARY SPECIFICATION, FIGHTING VEHICLE, INFANTRY, M2, M2A1, M2A2, AND FIGHTING VEHICLE, CAVALRY, M3, M3A1, M3A2: PROCESSING FOR STORAGE AND SHIPMENT OF (22 DEC 1989).

MIL-F-6939B, MILITARY SPECIFICATION FLUX, ALUMINUM AND ALUMINUM ALLOY, GAS WELDING (26 JUN 1970) [S/S BY SAE-AMS3414]., This specification covers one grade of flux for use in the gas welding of aluminum alloys

MIL-F-7092, MILITARY SPECIFICATION, FITTINGS, CARGO TIEDOWN, AIRCRAFT (18 DEC 1950) [SUPERSEDING AN-F-46]., This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

MIL-F-7179G, MILITARY SPECIFICATION FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEMS (14 APR 1993) [S/S BY MIL-STD-7179]., This specification establishes the minimum requirements for finishes, protective coatings, and sealants used in the protection of aerospace weapons systems (see 6.1)

MIL-F-7417, MILITARY SPECIFICATION FIXED GUN AND ROCKET INSTALLATIONS, ENGINEERING TEST OF (22 JUL 1954)., This specification covers the requirements for the fabrication of a firing test stand and the engineering tests of fixed gun and rocket installations of new model military aircraft and succeeding models therof in which the installation has been re-designed, and any alternate installations thereof.

MIL-F-83142A (NOTICE 5), MILITARY SPECIFICATION, FORGING, TITANIUM ALLOYS, PREMIUM QUALITY (15 MAY 2006)[S/S BY SAE-AMS4931, SAE-AMS4965, AND SAE-AMS-T-9047]., MIL-F-83142A(USAF), dated 1 December 1969, is hereby canceled. Future acquisitions for this item may refer to: Society of Automotive Engineers (SAE) Aerospace Materials Specifications (AMS): SAE-AMS4931 “Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness” SAE-AMS4965 “Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0AI - 4.0V Solution Heat Treated and Aged” SAE-AMS-T-9047 “Titanium and Titanium Alloy, Bars (Rolled or Forged) and Reforging Stock, Aircraft Quality” (Copies of these documents are available

MIL-F-83142A, MILITARY SPECIFICATION, FORGING, TITANIUM ALLOYS, PREMIUM QUALITY (1 DEC 1969)[S/S BY SAE-AMS4931, SAE-AMS4965, AND SAE-AMS-T-9047]., This specification covers unalloyed titanium and titanium alloy forgings suitable for aircraft and aerospace components.

MIL-F-83300, MILITARY STANDARD FLYING QUALITIES OF PILOTED V/STOL AIRCRAFT (31 DEC 1970)., This specification contains the requirements for the flying qualities of U.S. military piloted vertical and short takeoff and landing (V/STOL) aircraft operating at speeds less than Vcon.

MIL-F-85720 (AS), FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, GENERAL SPECIFICATION FOR (17 JUN 1985) (S/S BY SAE-AS85720)., This specification covers the basic test and design requirements for one style separable high pressure beam seai fittings tnciuding boss or port seal connectors for use in 5000/8000 psi aerospace fluid systems.

MIL-F-8785C, MILITARY SPECIFICATION FLYING QUALITIES OF PILOTED AIRPLANES (5 NOV 1980)., This specification contains the requirements for the flying and handling qualities, in flight and on the ground, of U.S. Military, manned, piloted airplanes except for flight at airspeeds below Vcon (MIL-F-83300). It is intended to assure flying qualities that provide adequate mission performance and flight safety regardless of design implementation or flight control system mechanization. The structure of the specification allows its use to guide these aspects in design tradeoffs, analyses and tests.

MIL-F-8905B, MILITARY SPECIFICATION, FITTINGS AND CARGO RINGS, AIRCRAFT FLOOR (1 DEC 1967) [S/S by SAE-AS8905]., This specification establishes requirements for two types of aircraft floor fittings for tiedown of cargo and seats, and two types of cargo tiedown rings.

MIL-F-8975/1A, MILITARY SPECIFICATION, FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, CORROSION RESISTANT AND HEAT RESISTANT STEEL AND TITANIUM, DESIGN AND USAGE LIMITATIONS FOR (29 SEP 1982) [S/S BY NASM8975/1]., The complete requirements for acquiring The fastener described herein shall consist of this document and the latest issue of MIL-F-8975.

MIL-F-8975B (AMENDMENT 4), MILITARY SPECIFICATION, FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, CORROSION RESISTANT STEEL, HEAT RESISTANT STEEL AND TITANIUM, GENERAL SPECIFICATION FOR (7 DEC 1998) [S/S BY NASM8975]., This amendment forms a part of Military Specification MIL-F-8975, dated 29 September 1982, and is approved for use by all departments and agencies of the Department of Defense

MIL-F-8975B, MILITARY SPECIFICATION, FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, CORROSION RESISTANT STEEL, HEAT RESISTANT STEEL AND TITANIUM, GENERAL SPECIFICATION FOR (29 SEP 1972) [S/S BY NASM8975]., This specification covers installation formed high strength, corrosion resistant, heat resistant steel and titanium fasteners which can be installed from only one side of an assembly.

MIL-F-9490D (USAF), FLIGHT CONTROL SYSTEMS, DESIGN, INSTALLATION AND TEST. This specification establishes general performance, design, development, and quality assurance requirements for the flight control systems of USAF manned piloted aircraft.

MIL-F-9490D, FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT GENERAL SPECIFICATION FOR (6 JUN 1975)., This specification establishes general performance, design, development and quality assurance requirements for the flight control systems of USAF manned piloted aircraft. Flight control systems (FCS) include all components used to transmit flight control commands from the pilot or other sources to appropriate force and moment producers. Flight control commands may result in control of aircraft flight path, attitude, airspeed, aero dynamic configuration, ride, and structural modes. Among components included are the pilot's controls, dedicated displays and logic switching, transducers, system dynamic and air data sensors, signal computation, test devices, transmission devices, actuators, and signal transmission lines dedicated to flight control. ExcIuded are aerodynamic surfaces, engines, helicopter rotors, fire control devices, crew displays and electronics not dedicated to flight control. The interfaces of flight control systems with related subsystems are defined.