MIL-E-1115D, MILITARY SPECIFICATION, ENAMEL, INTERIOR AND EXTERIOR, ALKYD, WHITE, (FORMULA NO. 30) (1 JUN 1995) [SUPERSEDING DOD-E-1115C]., This specification covers general purpose white alkyd enamel (Formula No. 30) for interior and exterior shipboard use. This product may be used where air pollution regulations apply.

MIL-E-15809D, MILITARY SPECIFICATION, EXPANDER, TUBE, CONDENSER AND HEAT EXCHANGERS (19 MAY 1992)., This specification covers tube expanders of the self-feeding type for use in expanding titanium, copper-nickel alloy or other non-ferrous alloy tubes in all types of tubular heat exchangers.

MIL-E-16400G (NAVY) (AMENDMENT 1), MILITARY SPECIFICATION ELECTRONIC, INTERIOR COMMUNICATION AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE: GENERAL SPECIFICATION FOR (1 DEC 1976).

MIL-E-16400G (NAVY), MILITARY SPECIFICATION ELECTRONIC, INTERIOR COMMUNICATION AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE: GENERAL SPECIFICATION FOR (24 DEC 1974).,

MIL-E-16400H (NAVY) (AMENDMENT 1), MILITARY SPECIFICATION ELECTRONIC, INTERIOR COMMUNICATION AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE: GENERAL SPECIFICATION FOR (7 SEP 1990) (S/S BY MIL-STD-2036)., This amendment forms a part of MIL-E-16400H, dated 13 July 1987, and is approved for use by the Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.

MIL-E-16400H (NAVY) (NOTICE 1), MILITARY SPECIFICATION ELECTRONIC, INTERIOR COMMUNICATION AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE: GENERAL SPECIFICATION FOR (18 jun 1991) (S/S BY MIL-STD-2036)., MIL-E-16400H (NAVY), dated 13 JUL 1987, is hereby cancelled. Future acquisition for this equipment should refer to MIL-STD-2036, General Requirements for Electronic Equipment Specifications.

MIL-E-16400H (NAVY), MILITARY SPECIFICATION ELECTRONIC, INTERIOR COMMUNICATION AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE: GENERAL SPECIFICATION FOR (13 JUL 1987) (S/S BY MIL-STD-2036)., This specification covers Naval ship and shore electronic, interior communication and navigation equipment, and those units of other Naval ship and shore equipment that utilize electronic technology (see 6.1). Guidance is provided in 6.4.1 for the selective application and tailoring of requirements to the equipment development phase and the equipment installation site.

MIL-E-17341C, MILITARY SPECIFICATION ENGINE, GAS TURBINE, PROPULSION AND AUXILIARY NAVAL SHIPBOARD (9 APR 1970)., This specification covers gas turbine engines for propulsion, generator, and auxiliary drive for marine service.

MIL-E-17555H (AMENDMENT 2), MILITARY SPECIFICATION ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS): PACKAGING OF (2 NOV 1992)., This amendment forms a part of MIL-E-17555H, dated 15 November 1984, and is approved for use by all Departents and Agencies of the Department of Defense.

MIL-E-17555H, MILITARY SPECIFICATION ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS): PACKAGING OF (15 NOV 1984)., This specification covers the packaging (preservation, packing and marking) requirements for electronic equipment, accessories, auxiliary equipment, miscellaneous electrical equipment and provisioned items (repair parts).

MIL-E-17814F (NOTICE 1)., MILITARY SPECIFICATION EXPANSION JOINTS, PIPE, SLIP-TYPE, PACKED (17 OCT 2001)., MIL-E-17814F, dated 1 June 1992, is hereby cancelled without replacement.

MIL-E-19933E (AMENDMENT 1), MILITARY SPECIFICATION, ELECTRODES AND RODS - WELDING, BARE, CHROMIUM AND CHROMIUM-NICKEL STEELS (29 SEP 1982).

MIL-E-19933E, MILITARY SPECIFICATION, ELECTRODES AND RODS - WELDING, BARE, CHROMIUM AND CHROMIUM-NICKEL STEELS (5 AUG 1981)., This specification covers chromium and chromium-nickel alloy bare welding electrodes and out-length rods for use with the inert-gas metal-are (consumable electrode) and the tungsten-arc welding processes: and bare welding electrode in coils for submerged-arc welding process.

MIL-E-2036D, MILITARY SPECIFICATION, ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD (10 MAR 1988)., This specification covers requirements for enclosures that house electric and electronic equipment for Naval shipboard use. Details concerning construction, ventilation, cooling, and mechanical protection are included in this specification

MIL-E-22200G, MILITARY SPECIFICATION ELECTRODES, WELDING, COVERED: GENERAL SPECIFICATION FOR (3 MAY 1989)., This specification covers the general requirements, quality assurance provisions, test procedures, and instructions for preparation for delivery for covered welding electrodes.

MIL-E-22267A, MILITARY SPECIFICATION EXPLOSIVE COMPOSITIONS, HBX TYPE (31 MAY 1963)., This specification covers three explosive compositions of the HBX type. These are: HBX-1, HBX-3 and H-6.

MIL-E-23919A, MILITARY SPECIFICATION ELECTRODES, REFERENCE, CIRCULAR, CORROSION PREVENTIVE, (FLUSH TYPE): SILVER-SILVER CHLORIDE (18 APR 1983)., This specification covers the requirements for circular silver-silver chloride flush type reference electrode used in impressed current cathodic protection systems. The reference electrode provides the control signal to the impressed current system and may be used to monitor the system operation. It includes features of design and fabrication of these electrodes, including alternate components.

MIL-E-24403A, MILITARY SPECIFICATION ELECTRODES - WELDING, FLUX CORED GENERAL SPECIFICATION FOR (21 DEC 1981)., This specification covers the general requirements for flux cored welding electrodes designed for use with the flux cored arc welding process with or without gas shielding.

MIL-E-24763A(SH) (W/ INTERIM AMENDMENT 1), MILITARY SPECIFICATION, ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE (9 AUG 2006)., This specification covers the requirements of (95 percent acrylic) water based emulsion (latex), enamels primarily for use on primed metal surfaces. The enamel shall be volatile organic content (VOC) compliant and shall be supplied in a variety of colors. (See 6.2 and 6.5) for shipboard use.

MIL-E-25499C (AMENDMENT-1), MILITARY SPECIFICATION, ELECTRICAL SYSTEM, AIRCRAFT, DESIGN AND INSTALLATION OF, GENERAL REQUIREMENTS FOR (23 MAR 1970) [SUPERSEDING MIL-E-25499B AND MIL-D-9402B]., This amendment forms a part of Military Specification MIL-E-25499c , dated 23 March 1970, and is approved for use by all Departments and Agencies of the Department of Defense .

MIL-E-25499C, MILITARY SPECIFICATION, ELECTRICAL SYSTEM, AIRCRAFT, DESIGN AND INSTALLATION OF, GENERAL REQUIREMENTS FOR (23 MAR 1970) [SUPERSEDING MIL-E-25499B AND MIL-D-9402B]., This specification covers the general requirements for the design and installation of alternating-current and direct-current electrical systems in military aircr

MIL-E-278B, MILITARY SPECIFICATION ELECTRODES, WELDING, COVERED, ALUMINUM BRONZE (26 JUN 1968) (S/S BY ANSI/AWS A5.6 & 5.13), This specification covers aluminum bronze electrodes for use with the shielded metal arc process.

MIL-E-4158E (AMENDMENT 3), MILITARY SPECIFICATION, ELECTRONIC EQUIPMENT, GROUND; GENERAL REQUIREMENTS FOR (31 DEC 1985) [S/S BY MIL-STD-454].

MIL-E-4158E, MILITARY SPECIFICATION, ELECTRONIC EQUIPMENT, GROUND; GENERAL REQUIREMENTS FOR (11 JAN 1973) [S/S BY MIL-STD-454]., This specification covers the general requirements of the design and manufacture of ground electronic equipment.

MIL-E-5272C (ASG) (AMENDMENT 1), MILITARY SPECIFICATION, ENVIRONMENTAL TESTING AND ASSOCIATED EQUIPMENT, GENERAL SPECIFICATION FOR (20 JAN 1960) [S/S BY MIL-STD-810].

MIL-E-5272C (ASG) (AMENDMENT 2), MILITARY SPECIFICATION, ENVIRONMENTAL TESTING AND ASSOCIATED EQUIPMENT, GENERAL SPECIFICATION FOR (18 SEP 1970) [S/S BY MIL-STD-810].

MIL-E-5272C (ASG), MILITARY SPECIFICATION, ENVIRONMENTAL TESTING AND ASSOCIATED EQUIPMENT, GENERAL SPECIFICATION FOR (13 APR 1959) [S/S BY MIL-STD-810].

MIL-E-5400T (AMENDMENT 1), MILITARY SPECIFICATION, ELECTRONIC EQUIPMENT, AIRBORNE, GENERAL SPECIFICATION FOR (5 SEP 1980)., This amendment forms a part of Military Specification MIL-E-5400T dated 16 November 1979, and is approved for use by al1 Departments and Agencies of The Department of Defense.

MIL-E-5400T (AMENDMENT 2), MILITARY SPECIFICATION, ELECTRONIC EQUIPMENT, AIRBORNE, GENERAL SPECIFICATION FOR (9 MAY 1986)., This amendment forms a part of Military Specification MIL-E-5400T dated 16 November 1979, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-E-5400T, MILITARY SPECIFICATION, ELECTRONIC EQUIPMENT, AIRBORNE, GENERAL SPECIFICATION FOR (16 NOV 1979)., This specification covers the general requirements for airborne electronic equipment for operation primarily in piloted aircraft.

MIL-E-5595C (AMENDMENT 2), MILITARY SPECIFICATION, ENGINE, AIRCRAFT, GAS TURBINE, CORROSION PREVENTION PRE OILING AND GROUND OPERATION OF, PROCESSES FOR (28 NOV 1979). This amendment forms a part of Military Specification MIL–C–5595C, dated 1 March 1965, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-E-5595C, MILITARY SPECIFICATION, ENGINE, AIRCRAFT, GAS TURBINE, CORROSION PREVENTION PRE OILING AND GROUND OPERATION OF, PROCESSES FOR (1 MAR 1965)., This specification covers the detail requirements governing the corrosion-prevention pre-oiling and ground operation of aircraft gas turbine engines and is applicable to all contractors having physical custody of these engines.

MIL-E-5607, MILITARY SPECIFICATION, ENGINE, GAS TURBINE, PREPARATION FOR STORAGE AND SHIPMENT OF, PROCESS FOR (16 MAR 1983)., This specification covers requirements governing preparation for storage and shipment of gas turbine engines.

MIL-E-6051, MILITARY SPECIFICATION ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS SYSTEMS (7 SEP 1967)., Electromagnetic Compatibility Requirements Systems. This spec outlines the overall requirements for systems electromagnetic compatibility, including control of the system electromagnetic environment, lighting, protection, static electricity, bonding and grounding.

MIL-E-6059A, MILITARY SPECIFICATION, ENGINE, AIRCRAFT, RECIPROCATING PROCESSES FOR CORROSION PROTECTION, PREOILING AND GROUND OPERATIONS OF (25 FEB 1954)., This specification covers the requirements for the prevention of corrosion, preoiling, and ground operation of aircraft reciprocating engines.

MIL-E-75H, DETAIL SPECIFICATION ELECTRON TUBES, PACKAGING OF (22 SEP 1986) [S/S BY MIL-DTL-75J]., This specification covers the requirements for the preservation, packing, and container marking of electron tubes and associated accessories (see 6.1).

MIL-E-82668, MILITARY SPECIFICATION, EXPLOSIVES, CYCLOTOL, 25/75 AND 29/71, RDX/TNT (3 AUG 1977) [SUPERSEDING WS-1724A]., This specification covers two types of cyclotol explosive referenced herein as the "explosive".

MIL-E-85051, MILITARY SPECIFICATION, ENCODERS, SHAFT POSITION TO DIGITAL, NON-CONTACT TYPE, ALTITUDE REPORTING (9 MAR 1977)., This specification covers the requirements for multi-turn non-contact type altitude reporting encoders.

MIL-E-85082/1, MILITARY SPECIFICATION, ENCODER, SHAFT POSITION TO DIGITAL CONTACT TYPE, ALTITUDE REPORTING TYPE 11KUL1267R80A (16 NOV 1992).

MIL-E-85082/2, MILITARY SPECIFICATION SHEET, ENCODER, SHAFT POSITION TO DIGITAL CONTACT TYPE, ALTITUDE REPORTING TYPE 11KUK1267R80A (16 NOV 1992).

MIL-E-917E, MILITARY SPECIFICATION, ELECTRIC POWER EQUIPMENT BASIC REQUIREMENTS (6 AUG 1993)., This specification covers the basic requirements applicable to the design, materials, and construction of Naval shipboard electric power equipment (exclusive of communication equipment, fire control equipment, and electronic equipment, other than that used in electric power applications). Only one classification of equipment is covered by this specification.

MIL-E-9426F, MILITARY SPECIFICATION, MILITARY SPECIFICATION ESCAPE SYSTEMS, REQUIREMENTS CONFORMANCE DEMONSTRATIONS AND PERFORMANCE TESTS FOR: GENERAL SPECIFICATION FOR (13 OCT 1978)., This specification establishes (a) the procedures to be used in demonstrating automated aircrew escape system compliance with the design, installation and performance requirements of MIL-S-18471 or MIL-A- 23121, as applicable, and (b) the demonstration and test requirements which must be satisfied prior to the release of an escape system for installation and service use. In addition, this specification provides guidance for developing demonstration and test programs for automated aircrew escape systems which do not conform to MIL-S-18471 or MIL-A-23121.