Your free source for specifications, standards, and handbooks
MIL SPECS (MIL-D)
MIL-D-1000/2A (SHIPS) (NOTICE 1), MILITARY SPECIFICATION DRAWINGS, ENGINEERING, AND ASSOCIATED LISTS (17 APR 1978)
MIL-D-1000/2A (SHIPS) (NOTICE 1), MILITARY SPECIFICATION DRAWINGS, ENGINEERING, AND ASSOCIATED LISTS (17 APR 1978)., Specification MIL-S-1000/2A (SHIPS), dated 15 June 1972, is hereby canceled/ The requirements of this specification have been incorporated into MIL-D-1000A, Drawings, Engineering, and Associated Lists, and MIL-STD-100B, Engineering Drawing Practices.
Ident. Num:
MIL-D-1000
Rev. Num:
/2A
MIL-D-1000/2A (SHIPS) (NOTICE 1), MILITARY SPECIFICATION DRAWINGS, ENGINEERING, AND ASSOCIATED LISTS (17 APR 1978)., Specification MIL-S-1000/2A (SHIPS), dated 15 June 1972, is hereby canceled/ The requirements of this specification have been incorporated into MIL-D-1000A, Drawings, Engineering, and Associated Lists, and MIL-STD-100B, Engineering Drawing Practices.
MIL-D-18300H, MILITARY SPECIFICATION DESIGN EXAMINATIONS, ENGINEERING AVIONIC SYSTEMS/EQUIPMENT GENERAL REQUIREMENTS FOR (23 FEB 1993)
MIL-D-18300H, MILITARY SPECIFICATION DESIGN EXAMINATIONS, ENGINEERING AVIONIC SYSTEMS/EQUIPMENT GENERAL REQUIREMENTS FOR (23 FEB 1993)., This specification covers the preparation of data for the General Requirements for Design Examinations, Engineering Avionic Systems/Equipment in support of Naval Air Systems Command (NAVAIR) avionics design, development, test, production and installation, For aircraft weapon systems. This specification does not cover financial or administrative data nor development, manufacturing or test facilities data nor evaluation, operational or material support data. (See 6.1 for intended use.)
Ident. Num:
MIL-D-18300
Rev. Num:
H
MIL-D-18300H, MILITARY SPECIFICATION DESIGN EXAMINATIONS, ENGINEERING AVIONIC SYSTEMS/EQUIPMENT GENERAL REQUIREMENTS FOR (23 FEB 1993)., This specification covers the preparation of data for the General Requirements for Design Examinations, Engineering Avionic Systems/Equipment in support of Naval Air Systems Command (NAVAIR) avionics design, development, test, production and installation, For aircraft weapon systems. This specification does not cover financial or administrative data nor development, manufacturing or test facilities data nor evaluation, operational or material support data. (See 6.1 for intended use.)
MIL-D-19326H, MILITARY SPECIFICATION DESIGN AND INSTALLATION OF LIQUID OXYGEN SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (31 AUG 1990)
MIL-D-19326H, MILITARY SPECIFICATION DESIGN AND INSTALLATION OF LIQUID OXYGEN SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (31 AUG 1990)., This specification covers, the general requirements for the design and installation of liquid oxygen (70 and 300 pounds per square inch gauge) (psig) (483kPa and 2068 kPa) systems in aircraft.
Ident. Num:
MIL-D-19326
Rev. Num:
H
MIL-D-19326H, MILITARY SPECIFICATION DESIGN AND INSTALLATION OF LIQUID OXYGEN SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (31 AUG 1990)., This specification covers, the general requirements for the design and installation of liquid oxygen (70 and 300 pounds per square inch gauge) (psig) (483kPa and 2068 kPa) systems in aircraft.
MIL-D-23119G, DRUMS, FABRIC, COLLAPSIBLE, LIQUID FUEL, CYLINDRICAL, 500-GALLON CAPACITY (15 JUL 1992)
MIL-D-23119G, DRUMS, FABRIC, COLLAPSIBLE, LIQUID FUEL, CYLINDRICAL, 500-GALLON CAPACITY (15 JUL 1992)., This specification covers three types of nonvented cylindrical, 500-gallon capacity, collapsible rubber drums, for storing and transporting fuels.
Ident. Num:
MIL-D-23119
Rev. Num:
G
MIL-D-23119G, DRUMS, FABRIC, COLLAPSIBLE, LIQUID FUEL, CYLINDRICAL, 500-GALLON CAPACITY (15 JUL 1992)., This specification covers three types of nonvented cylindrical, 500-gallon capacity, collapsible rubber drums, for storing and transporting fuels.
MIL-D-23140D, MILITARY SPECIFICATION DRAWINGS, INSTALLATION CONTROL, FOR ELECTRONIC EQUIPMENT (30 APR 1982)
MIL-D-23140D, MILITARY SPECIFICATION DRAWINGS, INSTALLATION CONTROL, FOR ELECTRONIC EQUIPMENT (30 APR 1982)., This specification covers the preparation and acquisition of installation control drawings for electronic equipment.
Ident. Num:
MIL-D-23140
Rev. Num:
D
MIL-D-23140D, MILITARY SPECIFICATION DRAWINGS, INSTALLATION CONTROL, FOR ELECTRONIC EQUIPMENT (30 APR 1982)., This specification covers the preparation and acquisition of installation control drawings for electronic equipment.
MIL-D-3464E, MILITARY SPECIFICATION DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION (21 APR 1987)
MIL-D-3464E, MILITARY SPECIFICATION DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION (21 APR 1987)., This specification covers bagged, chemically inert, dehydrating agents that prevent corrosion and mildew by adsorbing the moisture from the air of an enclosed space.
Ident. Num:
MIL-D-3464
Rev. Num:
E
MIL-D-3464E, MILITARY SPECIFICATION DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION (21 APR 1987)., This specification covers bagged, chemically inert, dehydrating agents that prevent corrosion and mildew by adsorbing the moisture from the air of an enclosed space.
MIL-D-3716B, MILITARY SPECIFICATION DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION (28 SEP 1987)
MIL-D-3716B, MILITARY SPECIFICATION DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION (28 SEP 1987)., This specification covers desiccants that remove moisture from air, other gases, and from liquids by dynamic means and that offer an approximate indication of the relative humidity of an enclosed space.
Ident. Num:
MIL-D-3716
Rev. Num:
B
MIL-D-3716B, MILITARY SPECIFICATION DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION (28 SEP 1987)., This specification covers desiccants that remove moisture from air, other gases, and from liquids by dynamic means and that offer an approximate indication of the relative humidity of an enclosed space.
MIL-D-50827A(MU), SOFT SOLDERED ELECTRICAL CONNECTIONS FOR CONVENTIONAL WEAPONS ITEMS INCLUDING OTHER RELATED ELECTRONICS DEVICES
MIL-D-50827A(MU), SOFT SOLDERED ELECTRICAL CONNECTIONS FOR CONVENTIONAL WEAPONS ITEMS INCLUDING OTHER RELATED ELECTRONICS DEVICES. This specification covers requirements and inspection criteria for soft soldered electrical connections in intricate and complex electronic or electromechanical items related to conventional weapons and other associated electronic devices. These items are high production rate devices in which mission performance is accomplished by a pattern or salvo. The specification aims at the establishment and maintenance of a process level adequate to support functional requirements. The requirements herein shall apply to all soldering operations under the contract, including those on subcontracts and purchase orders, except for those cases in which the component specifications cite other Government soldering specifications.
Ident. Num:
MIL-D-50827
Rev. Num:
A
MIL-D-50827A(MU), SOFT SOLDERED ELECTRICAL CONNECTIONS FOR CONVENTIONAL WEAPONS ITEMS INCLUDING OTHER RELATED ELECTRONICS DEVICES. This specification covers requirements and inspection criteria for soft soldered electrical connections in intricate and complex electronic or electromechanical items related to conventional weapons and other associated electronic devices. These items are high production rate devices in which mission performance is accomplished by a pattern or salvo. The specification aims at the establishment and maintenance of a process level adequate to support functional requirements. The requirements herein shall apply to all soldering operations under the contract, including those on subcontracts and purchase orders, except for those cases in which the component specifications cite other Government soldering specifications.
MIL-D-81950 (AMENDMENT 1), MILITARY SPECIFICATION DESIGN AND EVALUATION OF SIGNAL TRANSMISSION SUBSYSTEMS, GENERAL SPECIFICATION FOR (14 AUG 1975)
MIL-D-81950 (AMENDMENT 1), MILITARY SPECIFICATION DESIGN AND EVALUATION OF SIGNAL TRANSMISSION SUBSYSTEMS, GENERAL SPECIFICATION FOR (14 AUG 1975)., This amendment forms a part of Military Specification MIL-D-81980 (AS) dated 24 SEP 1974 and is approved for use by the Naval Sir Systems Command, Department of the Navy.
Ident. Num:
MIL-D-81950
Rev. Num:
-
MIL-D-81950 (AMENDMENT 1), MILITARY SPECIFICATION DESIGN AND EVALUATION OF SIGNAL TRANSMISSION SUBSYSTEMS, GENERAL SPECIFICATION FOR (14 AUG 1975)., This amendment forms a part of Military Specification MIL-D-81980 (AS) dated 24 SEP 1974 and is approved for use by the Naval Sir Systems Command, Department of the Navy.
MIL-D-81950, MILITARY SPECIFICATION DESIGN AND EVALUATION OF SIGNAL TRANSMISSION SUBSYSTEMS, GENERAL SPECIFICATION FOR (24 SEP 1974)
MIL-D-81950, MILITARY SPECIFICATION DESIGN AND EVALUATION OF SIGNAL TRANSMISSION SUBSYSTEMS, GENERAL SPECIFICATION FOR (24 SEP 1974)., This specification covers the general requirements for design and establishes uniform methods for testing signal transmission subsystems. For purposes of this specification, a signal transmission subsystem (STS) includes the energy source(s) and output control function devices, and is composed of the following components: cartridges, electric initiators, cartridge actuated devices (CAD's), transmission lines, and other associated equipment (see 6.3.2). The transmission lines (hose/tubing, detonating cord, electrical,deflagrating cord, optical, etc.) provide the means for routing a signal(s) between STS components.
Ident. Num:
MIL-D-81950
Rev. Num:
-
MIL-D-81950, MILITARY SPECIFICATION DESIGN AND EVALUATION OF SIGNAL TRANSMISSION SUBSYSTEMS, GENERAL SPECIFICATION FOR (24 SEP 1974)., This specification covers the general requirements for design and establishes uniform methods for testing signal transmission subsystems. For purposes of this specification, a signal transmission subsystem (STS) includes the energy source(s) and output control function devices, and is composed of the following components: cartridges, electric initiators, cartridge actuated devices (CAD's), transmission lines, and other associated equipment (see 6.3.2). The transmission lines (hose/tubing, detonating cord, electrical,deflagrating cord, optical, etc.) provide the means for routing a signal(s) between STS components.
MIL-D-8507D, MILITARY SPECIFICATION COATING, WASH PRIMER (PRETREATMENT) FOR METALS, APPLICATION OF (FOR AERONAUTICAL USE) (23 DEC 1963).
MIL-D-8507D, MILITARY SPECIFICATION COATING, WASH PRIMER (PRETREATMENT) FOR METALS, APPLICATION OF (FOR AERONAUTICAL USE) (23 DEC 1963)., This specification provides instructions for the application of wash primer pretreatment coating compound, Specification MIL-C-8514, prior to application of a primer.
Ident. Num:
MIL-D-8507
Rev. Num:
D
MIL-D-8507D, MILITARY SPECIFICATION COATING, WASH PRIMER (PRETREATMENT) FOR METALS, APPLICATION OF (FOR AERONAUTICAL USE) (23 DEC 1963)., This specification provides instructions for the application of wash primer pretreatment coating compound, Specification MIL-C-8514, prior to application of a primer.
MIL-D-85520 (AS) (AMENDMENT 1), MILITARY SPECIFICATION, DESIGN AND INSTALLATION OF ON BOARD OXYGEN GENERATING SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (16 JAN 1991)
MIL-D-85520 (AS) (AMENDMENT 1), MILITARY SPECIFICATION, DESIGN AND INSTALLATION OF ON BOARD OXYGEN GENERATING SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (16 JAN 1991).
Ident. Num:
MIL-D-85520
MIL-D-85520 (AS) (AMENDMENT 1), MILITARY SPECIFICATION, DESIGN AND INSTALLATION OF ON BOARD OXYGEN GENERATING SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (16 JAN 1991).
MIL-D-85520 (AS), MILITARY SPECIFICATION, DESIGN AND INSTALLATION OF ON BOARD OXYGEN GENERATING SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (10 MAR 1983)
MIL-D-85520 (AS), MILITARY SPECIFICATION, DESIGN AND INSTALLATION OF ON BOARD OXYGEN GENERATING SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (10 MAR 1983)., This specification covers the general requirements for the design and installation of on board oxygen generating systems (OBOGS) in military aircraft
Ident. Num:
MIL-D-85520
Rev. Num:
-
MIL-D-85520 (AS), MILITARY SPECIFICATION, DESIGN AND INSTALLATION OF ON BOARD OXYGEN GENERATING SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (10 MAR 1983)., This specification covers the general requirements for the design and installation of on board oxygen generating systems (OBOGS) in military aircraft
MIL-D-8684B, MILITARY SPECIFICATION DATA AND TESTS, ENGINEERING, CONTACT REQUIREMENTS FOR AIR LAUNCHED GUIDED MISSILE SYSTEMS (28 APR 1967)
MIL-D-8684B, MILITARY SPECIFICATION DATA AND TESTS, ENGINEERING, CONTACT REQUIREMENTS FOR AIR LAUNCHED GUIDED MISSILE SYSTEMS (28 APR 1967)., This specification contains the requirements for engineering data and tests to be furnished under contracts for air launched guided missile systems.
Ident. Num:
MIL-D-8684
Rev. Num:
B
MIL-D-8684B, MILITARY SPECIFICATION DATA AND TESTS, ENGINEERING, CONTACT REQUIREMENTS FOR AIR LAUNCHED GUIDED MISSILE SYSTEMS (28 APR 1967)., This specification contains the requirements for engineering data and tests to be furnished under contracts for air launched guided missile systems.
MIL-D-8708C, MILITARY SPECIFICATION, DEMONSTRATION: AIRCRAFT WEAPON SYSTEMS, GENERAL SPECIFICATION FOR (12 AUG 1991)
MIL-D-8708C, MILITARY SPECIFICATION, DEMONSTRATION: AIRCRAFT WEAPON SYSTEMS, GENERAL SPECIFICATION FOR (12 AUG 1991)., This specification establishes the general requirements for demonstration of Naval aircraft weapon systems during full scale engineering development.
Ident. Num:
MIL-D-8708
Rev. Num:
C
MIL-D-8708C, MILITARY SPECIFICATION, DEMONSTRATION: AIRCRAFT WEAPON SYSTEMS, GENERAL SPECIFICATION FOR (12 AUG 1991)., This specification establishes the general requirements for demonstration of Naval aircraft weapon systems during full scale engineering development.
