MIL-C-005011B, MILITARY SPECIFICATION CHARTS. STANDARD AIRCRAFT CHARACTERISTICS AND PERFORMANCE, PILOTED AIRCRAFT (FIXED WING) (21 JUN 1977)., This specification governs the definitions of requirements for, and methods of presenting characteristics and,performances for military piloted airplanes. This specification while primarily oriented to conventional take-off and landing (CTOL) aircraft may be applied to STOL and VIWL airplanes if the design criteria established by requirements for specific designs are substituted for the C~L criteria established herein.

MIL-C-10296J, MILITARY SPECIFICATION, CLOTH, SATEEN, COTTON (12 SEP 1986)., This document covers cotton sateen cloth.

MIL-C-104C (AMENDMENT 1), MILITARY SPECIFICATION CRATES, WOOD: LUMBER AND PLYWOOD SHEATHED, NAILED, AND BOLTED (24 JUN 1993).

MIL-C-104C, MILITARY SPECIFICATION CRATES, WOOD: LUMBER AND PLYWOOD SHEATHED, NAILED, AND BOLTED (30 MAR 1992)., This specification covers requirements for two types and two classes of sheathed crates each of which may have two styles of bases. The crates are designed for net leads not exceeding 30,000 pound (lb) and to withstand the most severe overseas shipping and storage conditions

MIL-C-10799H, MILITARY SPECIFICATION, CLOTH, COATED, COTTON, VINYL COATED, FIRE AND MILDEW RESISTANT (29 MAR 1983)., This document covers the requirements for waterproof, fire and mildew resistant, vinyl-coated cotton cloth

MIL-C-11015/18E, MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05 (14 MAY 2001)., The requirements for acquiring the capacitors described herein shall consist of this specification and MIL-C-11015.

MIL-C-11015/19E, MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK06 (14 MAY 2001)., The requirements for acquiring the capacitors described herein shall consist of this specification and MIL-C-11015.

MIL-C-11015E (SUPPLEMENT 1), MILITARY SPECIFICATION CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) (14 MAY 2001)., This supplement forms a part of MIL-C-11015E, dated 14 May 2001.

MIL-C-11015E, MILITARY SPECIFICATION CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) (14 MAY 2001)., This specification covers the general requirements for general purpose, ceramic dielectric, insulated, fixed capacitors for use in applications where variations in capacitance with respect to temperature, voltage, frequency, and life can be tolerated.

MIL-C-1164G, MILITARY SPECIFICATION, CLOTH, TERRY, COTTON, COTTON AND POLYESTER (26 OCT 1984)., This specification covers the requirements for terry cloth of one type only

MIL-C-12369F (AMENDMENT 1), MILITARY SPECIFICATION CLOTH, BALLISTIC, NYLON (17 AUG 1977)., This specification covers nylon ballistic cloth having a specified minimum ballistic resistance.

MIL-C-12369F, MILITARY SPECIFICATION CLOTH, BALLISTIC, NYLON (28 JUN 1974)., This specification covers nylon ballistic cloth having a specified minimum ballistic resistance.

MIL-C-13077A, MILITARY SPECIFICATION, CABLE, SPECIAL PURPOSE, ELECTRICAL (CORDAGE CO-212 AND CABLE, SPECIAL PURPOSE, ELECTRICAL WD-32/U) (27 MAY 1971)., This specification covers two types of two-conductor concentric type low voltage power cables, designated as Cordage CO-212; end Cable, Special Purpose, Electrical, WD-32/u. These cables are insulated and jacketed with low temperature (-5 deg C) styrene butadinene rubber (S2R), and rated at 150 volts ac. They are designed for service entrance use.

MIL-C-13486C, CABLES, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, SINGLE CONDUCTOR AND MULTIPLE CONDUCTOR, SHIELDED AND UNSHIELDED, GENERAL SPECIFICATION FOR (6 JUN 1989) [SUPERSEDED BY MIL-DTL-13486E]., This specification covers two types (shielded and unshielded) of insulated, heavy-duty, single and multiconductor, electrical cables for use in low-tension circuits (see 6.1).

MIL-C-13766C (ME) (AMENDMENT 1), MILITARY SPECIFICATION, CONVERSION KIT, BARGE, DECK ENCLOSURE DESIGN 7006, FOR DESIGNS 213A AND 7005. (23 JUN 1987)., This amendment forms a part of MIL-C-13766C(ME), dated 14 March 1983 and is approved for use within the USA Belvoir Research, Development, and Engineering Center, Department of the Army and is available for use by all Departments and Agencies of the Department of Defense.

MIL-C-13766C, MILITARY SPECIFICATION, CONVERSION KIT, BARGE, DECK ENCLOSURE DESIGN 7006, FOR DESIGNS 213A AND 7005. (14 MAR 1983)., This specification covers the construction of a knockdown, sectionalized, deckhouse kit for covering an existing 110-foot steel deck cargo barge (Design 7005) or a 120-foot steel deck cargo barge (Design 231A) into a covered lighter. Erection tools, welding, burning, and lifting gear are not included in the kit.

MIL-C-13924C (AMENDMENT 1), DETAIL SPECIFICATION COATING, OXIDE, BLACK, FOR FERROUS METALS. This amendment forms a part of Military Specification MIL--13924C, dated 9 June 1980, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-C-13924C, DETAILED SPECIFICATION COATING, OXIDE, BLACK, FOR FERROUS METALS (9 JUN 1980) [S/S BY MIL-DTL-13924D]., This specification covers black oxide coatings applied to ferrous metals (wrought iron, carbon, low alloy, and corrosion resistant steels). Black oxide coatings, with or without a supplementary preservative treatment, may be used where a black surface is required. Only very limited corrosion protection, under mildly corrosive conditions, is obtained as a result of black oxide coating.

MIL-C-14550B (AMENDMENT 3), MILITARY SPECIFICATION, COPPER PLATING (ELECTRODEPOSITED) (20 MAR 1987) [S/S BY SAE-AMS2418]., This specification covers electrodeposited copper plating on metal surfaces

MIL-C-14550B, MILITARY SPECIFICATION, COPPER PLATING (ELECTRODEPOSITED) (2 DEC 1983) [S/S BY SAE-AMS2418]., This specification covers electrodeposited copper plating on metal surfaces

MIL-C-14613A (w/ AMENDMENT 2), MILITARY SPECIFICATION, CHARGER, BOLT, CALIBER .50 BROWNING MACHINE GUN, M10 (6 MAY 2003)., This amendment forms a part of MIL-C-14613A (AR), dated 15 May 1972, and is approved by use the U.S. Army Armament, Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.

MIL-C-14613A, MILITARY SPECIFICATION, CHARGER, BOLT, CALIBER .50 BROWNING MACHINE GUN, M10 (15 MAY 1972)., This specification covers one type of manually operated charger for the Gun, Machine, Browning, Cal. .50, M2 Heavy Barrel, Turret Type.

MIL-C-14806A (AMENDMENT 2), MILITARY SPECIFICATION, COATING, REFLECTION REDUCING, FOR INSTRUMENT COVER GLASSES AND LIGHTING WEDGES (1 MAY 1974).

MIL-C-14806A, MILITARY SPECIFICATION, COATING, REFLECTION REDUCING, FOR INSTRUMENT COVER GLASSES AND LIGHTING WEDGES (12 JUN 1969)., This specification covers reflection reducing coatings applied to substrate material having indices of refraction within the range of 1.47 to 1.55 to be used as instrument cover glasses and lighting wedges herein referred to as optical elements.

MIL-C-15074E, MILITARY SPECIFICATION CORROSION PREVENTIVE, FINGERPRINT REMOVER (30 JAN 1991)., This specification covers one type of corrosion preventive intended for use as a fingerprint remover and as a temporary preservative for metallic items

MIL-C-15179B, MILITARY SPECIFICATION, CASTOR OIL, DEHYDRATED (18 JAN 1971)., This specification covers a dehydrated castor oil for paints, varnishes, lubrication, and specialized applications.

MIL-C-15479C, MILITARY SPECIFICATION CABLE, POWER, ELECTRICAL, SUBMARINE, NAVY STANDARD HARBOR DEFENSE (17 MAR 1958)., This specification covers standard marine cables for use in harbor defense systems.

MIL-C-16173E, PERFORMANCE SPECIFICATION CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION (20 OCT 1966) (S/S BY MIL-PRF-16173D)., This specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent.

MIL-C-16555D, MILITARY SPECIFICATION, COATING COMPOUND, STRIPPABLE, SPRAYABLE (24 FEB 1975)., This specification covers a strippable coating compound for application by spraying on painted or unpainted metal surfaces to seal openings and provide protection against corrosion. This specification meets Air Pollution Regulations (Rule 66).

MIL-C-1690D (NOTICE 1), MILITARY SPECIFICATION CASE, SHOTGUN, AMMUNITION, COTTON DUCK (25 JAN 1988)., Military Specification MIL-C-1690D dated 10 December 1970, has been reviewed and determined to be current.

MIL-C-1690D (NOTICE 2), MILITARY SPECIFICATION CASE, SHOTGUN, AMMUNITION, COTTON DUCK (2 AUG 2000)., MIL-C-1690D dated 10 December 1970, is hereby canceled. Future acquisitions for this item should refer to A-A-59522, Case, Shotgun, Ammunition, Cotton Duck.

MIL-C-1690D, MILITARY SPECIFICATION CASE, SHOTGUN, AMMUNITION, COTTON DUCK (10 DEC 1970)., This specification covers one type and size shotgun ammunition case, made of cotton duck, with compartments for 12 shotgun sheels. Loops are provided for attachment to a belt.

MIL-C-17/75F (NOTICE 1), DETAIL SPECIFICATION SHEET, CABLE, RADIO FREQUENCY FLEXIBLE COAXIAL 50 OHMS M17/75-RG214 AND M17/75-RG365 (16 APR 2003)., MIL-C-17/75F, dated 25 June 1998, has been reviewed and determined to be valid for use in acquisition.

MIL-C-17711B, MILITARY SPECIFICATION COATINGS, CHROMATE, FOR ZINC ALLOY CASTINGS AND HOT DIP GALVANIZED SURFACES (14 MAY 1974)., This specification covers chromate coatings for use with zinc base alloy cast surfaces and hot-dip galvanized surfaces.

MIL-C-17711B, MILITARY SPECIFICATION, COATINGS, CHROMATE, FOR ZINC ALLOY CASTINGS AND HOT DIP GALVANIZED SURFACES (14 MAY 1974)., This specification covers chromate coatings for use with zinc base alloy cast surfaces and hot-dip galvanized surfaces.

MIL-C-17G, MILITARY SPECIFICATION, CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERATION SPECIFICATION FOR (9 MAR 1990)., This specification covers flexible and semirigid cables with solid and semisolid dielectric cores, with single, dual and twin inner conductors. Cables covered by this specification are primarily intended for use as transmission lines to conduct energy in a simple power transfer continuously or intermittently. In general, these cables are designed for low-loss, stable operation from the relatively low frequencies through the higher frequencies in the microwave and radar regions of the frequency spectrum. Cables may also be used as circuit elements, delay lines or impedance matching devices. These cables are supplied under a reliability assurance program as specified in section 3.

MIL-C-18087A (SH), MILITARY SPECIFICATION CLUTCHES FOR PROPULSION UNITS AND AUXILIARY MACHINERY, NAVAL SHIPBOARD (15 AUG 1991)., This specification covers clutches for Naval shipboard propulsion units and auxiliary machinery. This specification does not include all types of clutches but is intended to cover those types most widely used in shipboard propulsion and auxiliary systems.

MIL-C-18244, CONTROL AND STABILIZATION SYSTEMS: AUTOMATIC, PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR (1 DEC 1962)., This specification covers design. test and performance requirements for either GFE or CFE automatic control and stabilization systems for all U.S. Navy piloted aircraft. In the event of conflict between this specification and other referenced documents the requirements of this specification shall govern. The detail requirements for a particular system shall be as specified in the detailed specification, contract or purchase order for that system. (See 6.2).

MIL-C-18244A (AS) (AMENDMENT 1), MILITARY SPECIFICATION, CONTROL AND STABILIZATION SYSTEMS: AUTOMATIC, PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR (18 AUG 1993)., This amendment forms a part of MIL-C-18244A(AS), dated 1 December 1962, and is approved for use by the Naval Air Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.

MIL-C-18244A(WEP), MILITARY SPECIFICATION, CONTROL AND STABILIZATION SYSTEMS: AUTOMATIC, PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR (1 DEC 1962)., This specification covers design. test and performance requirements for either GFE or CFE automatic control and stabilization systems for all U.S. Navy piloted aircraft. In the event of conflict between this specification and other referenced documents the requirements of this specification shall govern. The detail requirements for a particular system shall be as specified in the detailed specification, contract or purchase order for that system. (See 6.2)

MIL-C-18760, MILITARY SPECIFICATION, CARTRIDGE CASE, BRASS 8-INCH MARK 1 MOD 3 (55 CALIBER) (29 JUN 1955)., This specification covers the detail requirements for the 8-inch Mark 1 Mod 3 (55 caliber) brass cartridge case.

MIL-C-18821, MILITARY SPECIFICATION, CARTRIDGE CASES, BRASS 5-INCH (38 CALIBER) (18 SEP 1990)., This specification covers the detail requirements for 5-inch (38 Caliber) brass cartridge cases.

MIL-C-19002D, MILITARY SPECIFICATION, CLOTH, COATED, AND STRIP, COATED CLOTH - POLYCHLOROPRENE ON NYLON (30 JUN 1985)., The specification covers the requirements for nylon base polychloroprene coated cloth and coated cloth strip for use in the manufacture of pneumatic life preservers and waterproof garments

MIL-C-1911J (AMENDMENT 1), MILITARY SPECIFICATION, CAP, CAMOUFLAGE PATTERN (8 MAR 1990) [S/S BY A-55212].

MIL-C-1911J, MILITARY SPECIFICATION, CAP, CAMOUFLAGE PATTERN (9 FEB 1988) [S/S BY A-55212]., This document covers a cap made from cotton and nylon with flannel lined earflaps.

MIL-C-19713B, MILITARY SPECIFICATION, COOLERS, FLUID, BLEED AIR, GAS TURBINE, NAVAL SHIPBOARD (14 FEB 1992)., This specification covers after air coolers for bleed air from gas turbine engines for Naval shipboard application. Only one classification of coolers is covered by this specification.

MIL-C-20218F, MILITARY SPECIFICATION, CHROMIUM PLATING, ELECTRO-DEPOSITED, POROUS (13 NOV 1984)., This specification covers porous, electro-deposited chromium plating applied to surfaces where a lubricating film must be sustained such as cylinder bores.

MIL-C-20709D, MILITARY SPECIFICATION, CASEWORK, METAL AND WOOD (MEDICAL AND DENTAL) (14 MAY 1984) [S/S BY AA-C-2929]., This specification covers casework for medical and dental facilities.

MIL-C-21318C, MILITARY SPECIFICATION CLOTH, BEDFORD, CORD (23 OCT 1987)., This specification covers the requirements for an aircraft upholstery ribbed nylon cloth.

MIL-C-21768A, MILITARY SPECIFICATION, COPPER ALLOY NUMBERS 210 (GILDING 95%) AND 220 (COMMERCIAL BRONZE, 90%) SHEET AND STRIP (21 JUN 1971) [S/S BY ASTM-B36]., This specification covers copper alloy numbers 210 and 220 in sheet and strip form.

MIL-C-22263B, MILITARY SPECIFICATION COUPLING FUEL LINE, FLEXIBLE, 125 PS1, GENERAL SPECIFICATION FOR (28 JUN 1972)., This specification covers flexible couplings for joining tubing in aircraft fuel systems.

MIL-C-22395B (NOTICE 1), MILITARY SPECIFICATION, COMPOUND, END SEALING, THERMAL INSULATION PIPE COVERING-FIRE-, WATER-, AND WEATHER-RESISTANT (25 JUL 1989)., MIL-C-22395B, dated 9 December 1980, has been reviewed and determined to be valid for use in acquisition.

MIL-C-22395B, MILITARY SPECIFICATION, COMPOUND, END SEALING, THERMAL INSULATION PIPE COVERING-FIRE-, WATER-, AND WEATHER-RESISTANT (29 AUG 1963)., This specification covers flexible, fire resitant and water-proof and sealing compounds for thermal insulation exterior steam systems operating at temperatures up to 400o F.

MIL-C-22587B, MILITARY SPECIFICATION, CARTRIDGE, GREASE, 14 OUNCE (FOR CARTRIDGE-TYPE GREASE GUN) (15 FEB 1962) [S/S BY SAE-AMS-C-22587]., This specification covers 14 ounce capacity grease cartridges. They are designed for use with cartridge-type grease guns conforming to MIL-G-3859.

MIL-C-22750E, MILITARY SPECIFICATION COATING, EPOXY, HIGH-SOLIDS (31 JUL 1989)., This specification covers the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) content of 340 grams/liter (g/l) (2.8 pounds/gallon (lbs/gal)). The coating is supplied as a kit.

MIL-C-22931/13A (NOTICE 1), DETAIL SPECIFICATION SHEET CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, 1.625 TO 1.830 INCHES OUTSIDE DIAMETER, 50 OHMS (1 MAY 2003)., MIL-C-22931/13A, dated 20 January 1972, has been reviewed and determined to be valid for use in acquisition

MIL-C-22992E (SUPPLEMENT 1), DETAIL SPECIFICATION CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE, GENERAL SPECIFICATION FOR (28 AUG 1974) [S/S BY MIL-DTL-22992F).

MIL-C-22992E, DETAIL SPECIFICATION CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE, GENERAL SPECIFICATION FOR (28 AUG 1974) [S/S BY MIL-DTL-22992F)., This specification covers multi-contact, heavy duty, quick disconnect, waterproof, electrical plug and receptacle connectors and associated accessories for electronic and electrical power and control circuits. Connectors are rated for -55°C to +125°C (see 6.1).

MIL-C-23217, MILITARY SPECIFICATION, COATING, ALUMINUM, VACUUM DEPOSITED (ASG) (25 AUG 1969)., This specification covers vacuum-deposited aluminum coatings.

MIL-C-24066C, MILITARY SPECIFICATION, CLIP, COMPONENT, NON-ELECTRICAL, GENERAL SPECIFICATION FOR (6 JUL 1992) [S/S BY NAS1463]., This specification covers the general requirements for non-electrical component clips designed to hold miscellaneous electronic component parts.

MIL-C-24231D (SH), CONNECTORS, PLUGS, RECEPTACLES, ADAPTERS, HULL INSERTS, AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR (15 MAY 1987)., This specification covers pressure-proof single and multiple cable connectors, plugs, receptacles, adapters, hull inserts, and hull insert plugs.

MIL-C-24231D(AMENDMENT 1), MILITARY SPECIFICATION, CONNECTORS, PLUGS, RECEPTACLES, ADAPTERS, HULL INSERTS, AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR (7 AUG 1989).

MIL-C-24231D(SUPPLEMENT 1), MILITARY SPECIFICATION, CONNECTORS, PLUGS, RECEPTACLES, ADAPTERS, HULL INSERTS, AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR (15 MAY 1987)., This specification covers pressure-proof single and multiple cable connectors, plugs, receptacles, adapters, hull inserts, and hull insert plugs.

MIL-C-24308C, PERFORMANCE SPECIFICATION SPECIFICATION CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR (26 JAN 1989)., This specification covers the performance requirements for nonenvironmental, polarized shell, miniature, rack and panel connectors having pin and socket, crimp (removable), solder (nonremovable), or insulation displacement (nonremovable) contacts with rigid or float mounting, designed for -55EC to +125EC operating temperature.

MIL-C-24449A, MILITARY SPECIFICATION, CAST POLYMETHYL METHACRYLATE FOR SHEET STOCK, CUSTOM CASTINGS, AND FINISHED WINDOWS (3 AUG 1981)., This specification covers polymerized methyl methacrylate sheet stock, custom castings, and windows of optical quality for service in pressure vessels for human occupancy.

MIL-C-24615A, MILITARY SPECIFICATION, CASTINGS, NICKEL-CHROMIUM-MOLYBDENUM-COLUMBIUM ALLOY (14 OCT 1988)., This specification covers nickel-chromium-molybdenum-columbium (Ni-CR-Mo-Cb) (UNS N06625) alloy castings for corrosion-resistant service.

MIL-C-24707 (SUPPLEMENT 1), MILITARY SPECIFICATION, CASTINGS, FERROUS, GENERAL SPECIFICATION FOR (27 JAN 1989).

MIL-C-24707, MILITARY SPECIFICATION, CASTINGS, FERROUS, GENERAL SPECIFICATION FOR (27 JAN 1989)., This specification covers the general requirements for carbon, alloy and corrosion resisting steel castings.

MIL-C-24758C, MILITARY SPECIFICATION CONDUIT SYSTEMS, FLEXIBLE, WEATHERPROOF (5 AUG 1991)., This specification covers the general requirements for flexible, weatherproof conduit and associated fittings primarily for use in external areas on U.S. Navy Ship's to shield cables against electromagnetic (EM) radiation from own-ship transmitters and from an electromagnetic pulse (EMP).

MIL-C-24929A (AMENDMENT 1), MILITARY SPECIFICATION, CLOTH, LAMINATED, ALUMINIZED (PARA-ARAMID BASE) (4 JAN 1993).

MIL-C-24929A, MILITARY SPECIFICATION, CLOTH, LAMINATED, ALUMINIZED (PARA-ARAMID BASE) (30 SEP 1988)., This specification covers the requirements for knitted. aluminized, para-aramid fabrics.

MIL-C-25050A (AMENDMENT 4), MILITARY SPECIFICATION, COLORS, AERONAUTICAL LIGHTS AND LIGHTING EQUIPMENT, GENERAL SPECIFICATION FOR (30 MAR 1989) [S/S BY SAE-AS25050].

MIL-C-25050A (NOTICE 2), MILITARY SPECIFICATION COLORS, AERONAUTICAL LIGHTS AND LIGHTING EQUIPMENT, GENERAL REQUIREMENTS FOR (13 SEP 1999)., MIL-C-25050A(2) dated 30 March 1989, is hereby canceled. Future acquisition for this item should refer to SAE-AS25050, “Colors, Aeronautical Lights and Lighting Equipment, General Requirements For.”

MIL-C-25050A, MILITARY SPECIFICATION, COLORS, AERONAUTICAL LIGHTS AND LIGHTING EQUIPMENT, GENERAL SPECIFICATION FOR (2 DEC 1963) [S/S BY SAE-AS25050]., This specification covers the chromaticity and transmission requirements of equipment light transmitting ware in the descending order of transmission.

MIL-C-26074C (AMENDMENT 1), MILITARY SPECIFICATION COATINGS, ELECTROLESS NICKEL REQUIREMENTS FOR. This amendment forms a part of military specification MIL-C-26074C, dated 3 May 1985. and is approved for use by all Department and agencies of the Department of Defense.

MIL-C-26074D, COATINGS, MILITARY SPECIFICATION ELECTROLESS NICKEL, REQUIREMENTS FOR. This specification covers the requirements for electroless (autocatalytic chemical reduction) deposition of nickel or nickel coatings on metal surfaces.

MIL-C-26074E (SH) (NOTICE 1), COATINGS, MILITARY SPECIFICATION ELECTROLESS NICKEL, REQUIREMENTS FOR. MIL-C-26074E, dated October 1990,is hereby canceled.

MIL-C-26074E (SH) (NOTICE 3), COATINGS, MILITARY SPECIFICATION ELECTROLESS NICKEL, REQUIREMENTS FOR. MIL-C-26074E, dated 30 October 1990, is hereby reinstated by the Naval Sea Systems Command, Department of the Navy, and maybe used for acquisition.

MIL-C-2607E, (NOTICE 2) MILITARY SPECIFICATION COATINGS, ELECTROLESS NICKEL REQUIREMENTS FOR. MIL-C-2607E, Dated 30 October 1990, is hereby cancelled.

MIL-C-2607E, MILITARY SPECIFICATION COATINGS, ELECTROLESS NICKEL REQUIREMENTS FOR. This specification covers the requirements for electroless (autocatalytic chemical reduction) deposition of nickel-phosphorous alloy coatings on metal and composite surfaces.

MIL-C-27487G, MILITARY SPECIFICATION COUPLING HALVES, QUICK-DISCONNECT, CAM-LOCKING TYPE (19 SEP 1986) (S/S BY A-A-59326)., This specification covers cam-locking type, quick-disconnect coupling halves.

MIL-C-27505B (USA), MILITARY SPECIFICATION CARTRIDGE, ENGINE STARTER MXU-4A/A (15 JUN 1967)., This specification covers the requirements for one type of solid propellant engine starter cartridge, designated MXU-4A/A.

MIL-C-28981, MILITARY SPECIF CATION, CASE, SMALL ARMS AMMUNITION, 30 ROUND MAGAZINE M-16 RIFLE (31 JAN 1972)., This specification covers the requirements for one type and size ammunition case used as a unit of the lightweight individual clothing and load carrying equipment.

MIL-C-29106B, MILITARY SPECIFICATION, COAT, MAN'S, WOOL, WINTER (1 MAR 1982)., This specification covers the requirements for a double breasted dress coat constructed of 15 ounce blue wool serge cloth.

MIL-C-29184B (NOTICE 3), DETAIL SPECIFICATION, CABLE ASSEMBLIES, POWER, ELECTRICAL, FOR PORTABLE PANELBOARDS, GENERAL SPECIFICATION FOR (17 NOV 2006), MIL-C-29184B, dated 16 April 2001, remains inactive for new design; however, the document is valid for use.

MIL-C-29240 (NOTICE 1), MILITARY SPECIFICATION, PERFORMANCE SPECIFICATIONS FOR CASEWORK, MOVEABLE AND MODULAR FOR HOSPITAL LABORATORIES AND PHARMACIES (1 APR 1991)., MIL-C-29240, dated 10 May 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-C-29240, MILITARY SPECIFICATION, CASEWORK, MOVEABLE AND MODULAR, FOR HOSPITAL LABORATORIES AND PHARMACIES, PERFORMANCE SPECIFICATIONS FOR (10 MAY 1985)., This performance specification covers modular, moveable casework configuration for hospital laboratories and pharmacies.

MIL-C-29475 (MC), MILITARY SPECIFICATION, COATING, WATER BORNE POLYURETHANE CAMOUFLAGE (7 JUL 1994)., This specification covers the requirements of a camouflage, chemical agent resistant, reduced volatile organic compound (VOC) water reducible polyurethane coating, for use as a finished coat on military equipment.

MIL-C-320C (NOTICE 1), CONCERTINA, BARBED WIRE (29 JUL 1985) [S/S BY MIL-B-52775].

MIL-C-3301C, MILITARY SPECIFICATION COMPOUND, ASPHALTIC, HOT MELT (CAVITY LINING) (15 SEP 1970)., This specification covers a hot-melt asphaltic compound for coating the inner walls of metal cases prior to filling with explosives.

MIL-C-3432F, DETAIL SPECIFICATION CABLES, (POWER AND SPECIAL PURPOSE) AND WIRE, ELECTRICAL (300 AND 600 VOLTS) (2 NOV 1992) [S/S BY MIL-DTL-3432G]., This specification covers single and multiple conductor cables with and without shields for use in 300 and 600 volts root mean square (rms) applications (see 6.1).

MIL-C-38999J (SUPPLEMENT 1), MILITARY SPECIFICATION, CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR (20 JUN 1990) [S/S BY MIL-DTL-38999].

MIL-C-38999J, MILITARY SPECIFICATION, CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR (6 APR 1990) [S/S BY MIL-DTL-38999]., This specification covers four series of miniature, high density bayonet, threaded, or breech coupling, circular, environment resistant, electrical connectors using removable crimp or fixed hermetic solder contacts, and are capable of operation within a temperature range of -65 deg C to +200 deg C.

MIL-C-39029D (SUPPLEMENT 1A, MILITARY SPECIFICATION CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR (2 MAY 1988) (S/S BY SAE-AS39029)., This supplement forms a part of Military Specification MIL-C-3902D, dated 02 May 1988.

MIL-C-39029D, MILITARY SPECIFICATION CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR (2 MAY 1988) (S/S BY SAE-AS39029)., This specification covers the general requirements for removable crimp, solderless wrap, and solder type electrical contacts for use in connectors and other electric and electronic components.

MIL-C-3998E, MILITARY SPECIFICATION, CRANE TRUCKS, WAREHOUSE, DIESEL ENGINE, PNEUMATIC RUBBER TIRES (31 MAR 1994)., This specification covers diesel-engine-driven, wheel mounted, self-propelled, rotating and telescoping boom, warehouse and industrial handling cranes.