EverySpec Standards
Home > Library > MIL-PRF > MIL-PRF-030000-79999 > MIL-PRF-39016F AMENDMENT-1

MIL-PRF-39016F (w/AMENDMENT-1), PERFORMANCE SPECIFICATION: RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (26-SEP-2005) [SUPERSEDING MIL-R-39016D]

MIL-PRF-39016F (w/AMENDMENT-1), PERFORMANCE SPECIFICATION: RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (26-SEP-2005) [SUPERSEDING MIL-R-39016D]., This specification covers the general requirements for electromagnetic, hermetically sealed relays for use in electronic and communication-type equipment (see 6.1). These relays are designed to operate over the full range from low level to power switching with contact ratings up to 5 amperes alternating current (ac) or direct current (dc). The failure rate level is established at a confidence level of 90 percent for qualification and 60 percent for maintenance of qualification based on 100,000 cycles at +125°C under the rated load conditions specified herein. CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. CAUTION: Pick-up, hold, and dropout voltages are for test purposes only and are not to be used as design criteria. For additional application and caution information, see 6.1.

MIL-PRF-39016 Rev. F

    
 Status:
Active

 FSC Code:
 5945 - Relays and Solenoids

Version:
G08-2014350.05 KB MIL-PRF-39016G
G08-201416.47 KB MIL-PRF-39016G_SUPPLEMENT-1
F09-2005355.45 KB MIL-PRF-39016F_AMENDMENT-1
F11-2002356.35 KB MIL-PRF-39016F
E-1A02-200211.32 KB MIL-PRF-39016E_SUPPLEMENT-1A
E06-1998356.79 KB MIL-PRF-39016E_AMENDMENT-2
E07-19943.26 MB MIL-PRF-39016E

Simple Search
MilSpec Search



About Us   |   Terms of Use   |   DMCA   |   Privacy   |   EverySpec LLC © 2009 - 2024   All rights reserved.