EverySpec Standards
Home > Library > MIL-PRF > MIL-PRF-010000-29999 > MIL-PRF-28776D

MIL-PRF-28776D, PERFORMANCE SPECIFICATION: RELAYS, HYBRID, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (01-NOV-2002) [SUPERSEDING MIL-R-28776B]

MIL-PRF-28776D, PERFORMANCE SPECIFICATION: RELAYS, HYBRID, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (01-NOV-2002) [SUPERSEDING MIL-R-28776B]., This specification establishes the general requirements for relays that use a combination of solid state circuit input elements functioning with an electro-mechanical relay that performs the switching functions associated with control system applications (see 6.1). These relays are designed to operate in low and medium power switching circuits with contact ratings up to 1 ampere alternating current (ac) or direct current (dc). The failure rate level is established at a confidence level of 90 percent for qualification and 60 percent for maintenance of qualification based on 100,000 cycles at +125°C under rated load conditions specified herein. Excludes time delay relays. CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. CAUTION: Pick-up, hold, and dropout voltages are for test purposes only and are not to be used as design criteria. For additional application and caution information, see 6.1.

MIL-PRF-28776 Rev. D

    
 Status:
Active

 FSC Code:
 5945 - Relays and Solenoids

Version:
E09-201211.34 KB MIL-PRF-28776E_SUPPLEMENT-1
E09-2012286.82 KB MIL-PRF-28776E
D12-20112.03 KB MIL-PRF-28776D_NOTICE-1
D09-2005304.28 KB MIL-PRF-28776D_AMENDMENT-1
D11-2002305.94 KB MIL-PRF-28776D
C06-1998290.06 KB MIL-PRF-28776C_AMENDMENT-1
C08-199429.92 KB MIL-PRF-28776C_SUPPLEMENT-1
C07-19942.05 MB MIL-PRF-28776C

Simple Search
MilSpec Search



About Us   |   Terms of Use   |   DMCA   |   Privacy   |   EverySpec LLC © 2009 - 2024   All rights reserved.