MIL-PRF-10924G, PERFORMANCE SPECIFICATION, GREASE, AUTOMOTIVE AND ARTILLERY (24 SEP 1998)

MIL-PRF-10924G, PERFORMANCE SPECIFICATION, GREASE, AUTOMOTIVE AND ARTILLERY (24 SEP 1998)., This specification covers one grade of a multi-purpose grease for lubrication of ground vehicles and equipment (see 6.1) and is identified by Military Symbol GAA and NATO Code Number G-403.

MIL-PRF-13789E, PERFORMANCE SPECIFICATION, STRAINERS, SEDIMENT: PIPELINE, BASKET TYPE

MIL-PRF-13789E, PERFORMANCE SPECIFICATION, STRAINERS, SEDIMENT: PIPELINE, BASKET TYPE. This specification covers single element basket-type sediment strainers from 0.75 to 12.00-inch nominal pipe size, for the removal of foreign material from fuel and oil service lines.

MIL-PRF-13830B, PERFORMANCE SPECIFICATION OPTICAL COMPONENTS FOR FIRE CONTROL INSTRUMENTS; GENERAL SPECIFICATION GOVERNING THE MANUFACTURE, ASSEMBLE,

MIL-PRF-13830B, PERFORMANCE SPECIFICATION OPTICAL COMPONENTS FOR FIRE CONTROL INSTRUMENTS; GENERAL SPECIFICATION GOVERNING THE MANUFACTURE, ASSEMBLE, AND INSPECTION (9 JAN 1997)., This spec covers the manufacture, assembly and inspection of finished optical components such as lenses, prisms, mirrors, reticle windows and wedges for fire control instruments.

MIL-PRF-15624F, PERFORMANCE SPECIFICATION GASKET MATERIAL, RUBBER, 50 DUROMETER HARDNESS (MAXIMUM)

MIL-PRF-15624F, PERFORMANCE SPECIFICATION GASKET MATERIAL, RUBBER, 50 DUROMETER HARDNESS (MAXIMUM)., This specification establishes the requirements for synthetic rubber materials for gaskets 50 durometer hardness maximum.

MIL-PRF-15733 (AMENDMENT 3), PERFORMANCE SPECIFICATION FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR (31 JAN 2007)

MIL-PRF-15733 (AMENDMENT 3), PERFORMANCE SPECIFICATION FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR (31 JAN 2007)., This specification covers the general requirements for low-pass filters and capacitors used to suppress radio frequency/electromagnetic interference. Filters furnished to the requirements of this specification contain shunting capacitors and series inductors (FSC 5915). Capacitors furnished to the requirements of this specification contain shunting capacitors (FSC 5910). For the purposes of this specification, feed-thru capacitor types (C circuit configuration) are referred to herein as a filter. Passband power may be alternating current (ac) and/or direct current (dc) and the filter is used primarily in the reduction of broadband radio frequency interference.

MIL-PRF-16005F, PERFORMANCE SPECIFICATION PROPELLANT HYDROGEN PEROXIDE

MIL-PRF-16005F, PERFORMANCE SPECIFICATION PROPELLANT HYDROGEN PEROXIDE. This specification covers four types and two grades of hydrogen peroxide propellant.

MIL-PRF-16173E, PERFORMANCE SPECIFICATION CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION (6 JAN 1993)

MIL-PRF-16173E, PERFORMANCE SPECIFICATION CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION (6 JAN 1993)., This specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent.

MIL-PRF-17331J, PERFORMANCE SPECIFICATION LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE (9 SEP 2003)

MIL-PRF-17331J, PERFORMANCE SPECIFICATION LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE (9 SEP 2003)., This specification covers a single classification of steam turbine and gear lubricating oil, moderate service, for use in main and auxiliary turbines and gears, air compressors, and certain hydraulic equipment, as well as for general mechanical lubrication.

MIL-PRF-18494E, PERFORMANCE SPECIFICATION LIFE RAFTS, INFLATABLE, MULTI-PLACE (27 JUL 1999) [SUPERSEDING MIL-I-18494D]

MIL-PRF-18494E, PERFORMANCE SPECIFICATION LIFE RAFTS, INFLATABLE, MULTI-PLACE (27 JUL 1999) [SUPERSEDING MIL-I-18494D]., This specification covers the requirements for inflatable life rafts of 8-man, 12-man, and 20-man capacity.

MIL-PRF-18494F (NOTICE 1), PERFORMANCE SPECIFICATION LIFE RAFTS, INFLATABLE, MULTI-PLACE (05 MAR 2008)

MIL-PRF-18494F (NOTICE 1), PERFORMANCE SPECIFICATION LIFE RAFTS, INFLATABLE, MULTI-PLACE (05 MAR 2008)., MIL-PRF-18494F, dated 31 May 2003, has been reviewed and determined to be valid for use in acquisition.

MIL-PRF-18494F, PERFORMANCE SPECIFICATION LIFE RAFTS, INFLATABLE, MULTI-PLACE (31 MAY 2003)

MIL-PRF-18494F, PERFORMANCE SPECIFICATION LIFE RAFTS, INFLATABLE, MULTI-PLACE (31 MAY 2003)., This specification covers the requirements for inflatable life rafts of 8-man, 12-man, and 20-man capacity.

MIL-PRF-18949A, PERFORMANCE SPECIFICATION PROJECTILES, ILLUMINATING, LOCALIZED HEAT TREATMENT OF (5 JAN 1976) [SUPERSEDING MIL-P-18949 (NOrd)]

MIL-PRF-18949A, PERFORMANCE SPECIFICATION PROJECTILES, ILLUMINATING, LOCALIZED HEAT TREATMENT OF (5 JAN 1976) [SUPERSEDING MIL-P-18949 (NOrd)]., This specification covers the localized heat treatment requirements of an inner annulus of the body under the band seat on illuminating projectiles, and supplements the requirements of the projectile specification.

MIL-PRF-18949B, PERFORMANCE SPECIFICATION PROJECTILES, ILLUMINATING, LOCALIZED HEAT TREATMENT OF (26 MAY 1999)

MIL-PRF-18949B, PERFORMANCE SPECIFICATION PROJECTILES, ILLUMINATING, LOCALIZED HEAT TREATMENT OF (26 MAY 1999)., This specification covers the localized heat treatment requirements of an inner annulus of the body under the band seat on illuminating projectiles, and supplements the requirements of the projectile specification.

MIL-PRF-19207D, PERFORMANCE SPECIFICATION FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (23 AU

MIL-PRF-19207D, PERFORMANCE SPECIFICATION FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (23 AUG 1991) (SUPERSEDING MIL-F-19207C)., This specification covers the general requirements for enclosed, panel mounted, extractor post type electrical fuseholders, both blown fuse indicating and nonindicating.

MIL-PRF-19207F, PERFORMANCE SPECIFICATION FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (15 MA

MIL-PRF-19207F, PERFORMANCE SPECIFICATION FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (15 MAY 2007)., This specification covers the general requirements for enclosed, panel mounted, extractor post type electrical fuseholders, both blown fuse indicating and nonindicating.

MIL-PRF-19500L, PERFORMANCE SPECIFICATION SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR (22 OCT 1998)

MIL-PRF-19500L, PERFORMANCE SPECIFICATION SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR (22 OCT 1998)., This specification establishes the general performance requirements for semiconductor devices. Detail requirements and characteristics are specified in the performance specification sheet. Revisions to this and performance specification sheets are structured to assure the interchangeability of devices of the same part type regardless of manufacturing date code or conformance inspection (CI) completion date. Five quality levels for encapsulated devices are provided for in this specification, differentiated by the prefixes JAN, JANTX, JANTXV, JANJ, and JANS. Seven radiation hardness assurance (RHA) levels are provided for the JANTXV and JANS quality levels. These are designated by the letters M, D, L, R, F, G, and H following the quality level portion of the prefix. Two quality levels for unencapsulated devices are provided for in this specification, differentiated by the prefixes JANHC and JANKC.

MIL-PRF-19500M, GENERAL SPECIFICATION FOR SEMICONDUCTOR DEVICES (22 OCT 1999)

MIL-PRF-19500M, GENERAL SPECIFICATION FOR SEMICONDUCTOR DEVICES (22 OCT 1999)., This specification establishes the general performance requirements for semiconductor devices.

MIL-PRF-19565C (AMENDMENT 1), PERFORMANCE SPECIFICATION COATING COMPOUNDS, THERMAL INSULATION, FIRE- AND WATER-RESISTANT, VAPOR-BARRIER (8 APR 1988) [

MIL-PRF-19565C (AMENDMENT 1), PERFORMANCE SPECIFICATION COATING COMPOUNDS, THERMAL INSULATION, FIRE- AND WATER-RESISTANT, VAPOR-BARRIER (8 APR 1988) [SUPERSEDING MIL-C-19565C].

MIL-PRF-1M (AMENDMENT 1),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (10 NOV 2005)

MIL-PRF-1M (AMENDMENT 1),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (10 NOV 2005).

MIL-PRF-1M (SUPPLEMENT 1),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (11 JUN 2003)

MIL-PRF-1M (SUPPLEMENT 1),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (11 JUN 2003).

MIL-PRF-1M (SUPPLEMENT 1A),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (10 NOV 2005)

MIL-PRF-1M (SUPPLEMENT 1A),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (10 NOV 2005).

MIL-PRF-1M (SUPPLEMENT 1B),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (24 OCT 2006)

MIL-PRF-1M (SUPPLEMENT 1B),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (24 OCT 2006)., This supplement forms a part of Performance Specification MIL-PRF-1M w/ AMENDMENT 1, dated 10 November 2005

MIL-PRF-1M (W/ AMENDMENT 2 - ALL PREVIOUS AMENDMENTS INCORPORATED),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (10 MAR 2006)

MIL-PRF-1M (W/ AMENDMENT 2 - ALL PREVIOUS AMENDMENTS INCORPORATED),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (10 MAR 2006).

MIL-PRF-1M,PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR 9 MAY 2003)

MIL-PRF-1M,PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR 9 MAY 2003)., This specification covers the general requirements and ratings for electron tubes used by the military departments.

MIL-PRF-20696F, PERFORMANCE SPECIFICATION CLOTH, CLOTH, WATERPROOF, WEATHER RESISTANT (2 SEP 1997)

MIL-PRF-20696F, PERFORMANCE SPECIFICATION CLOTH, CLOTH, WATERPROOF, WEATHER RESISTANT (2 SEP 1997)., This specification covers the requirements for four types and four classes of weather resistant, waterproof cloth.

MIL-PRF-21260E, PERFORMANCE SPECIFICATION, LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN (31 JUL 1998) [SUPERSEDING MIL-L-21260D]

MIL-PRF-21260E, PERFORMANCE SPECIFICATION, LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN (31 JUL 1998) [SUPERSEDING MIL-L-21260D]., This performance specification covers engine oils suitable for preservation, break-in, and lubrication of reciprocating internal combustion engines of both spark-ignition and compression-ignition types, and of power transmission fluid applications in equipment used in combat/tactical service (see 6.1, 6.7 and 6.9).

MIL-PRF-22750F, PERFORMANCE SPECIFICATION COATING, EPOXY, HIGH-SOLIDS (31 MAY 1994)

MIL-PRF-22750F, PERFORMANCE SPECIFICATION COATING, EPOXY, HIGH-SOLIDS (31 MAY 1994)., This specification covers the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) content of 340 grams/liter (g/l) (2.8 pounds/gallon (lbs/gal)). The coating is supplied as a kit.

MIL-PRF-23199/1 (SH) REV. A, PERFORMANCE SPECIFICATION PACKAGING, PACKING AND MARKING (PP&M) REQUIREMENTS FOR INSTRUMENTATION AND CONTROL EQUIPMENT (2

MIL-PRF-23199/1 (SH) REV. A, PERFORMANCE SPECIFICATION PACKAGING, PACKING AND MARKING (PP&M) REQUIREMENTS FOR INSTRUMENTATION AND CONTROL EQUIPMENT (28 FEB 2003)., This specification covers the requirements for packaging, packing, and marking of Instrumentation and Control components to safeguard cleanliness, prevent damage and corrosion, and preserve identification during shipment and storage.

MIL-PRF-23199E, PERFORMANCE SPECIFICATION PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIRS PARTS (28 FEB 1997)

MIL-PRF-23199E, PERFORMANCE SPECIFICATION PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIRS PARTS (28 FEB 1997)., This specification covers the requirements for packaging, packing, and marking of mechanical components to safeguard cleanliness, prevent damage and corrosion, and preserve identification during shipment and storage.

MIL-PRF-23236C, PERFORMANCE SPECIFICATION COATING SYSTEMS FOR SHIP STRUCTURES (12 AUG 2003)

MIL-PRF-23236C, PERFORMANCE SPECIFICATION COATING SYSTEMS FOR SHIP STRUCTURES (12 AUG 2003)., This specification covers five types of air pollution regulated ship and structure coatings that comply with the National Emission Standards for Hazardous Air Pollutants (NESHAP) for shipbuilding for state and federal regulations (except Type VIII and VIIIA). There are 17 classes of coating systems. There are four grades of coating systems based on temperature of application and cure. In addition to tanks, all paint systems qualified to this specification are suitable for use on any ship structures, interior or exterior, for corrosion control. Except for trace levels, all types are free of Lead, Chromium, Cadmium, and Asbestos (see 3.2.3). All types, except type IV, have levels of hazardous air pollutants (HAPs) that do not exceed applicable NESHAP levels (see 3.2.2). Dry Type V, VI, VII and VIII coating residues and debris are non-hazardous waste under U.S. Environmental Protection Agency (USEPA) regulations in effect on the date of this specification. Type VII coating will not have any solvent added to either the base resin component or the hardener component.

MIL-PRF-23377H, PERFORMANCE SPECIFICATION PRIMER COATINGS: EPOXY, HIGH-SOLIDS

MIL-PRF-23377H, PERFORMANCE SPECIFICATION PRIMER COATINGS: EPOXY, HIGH-SOLIDS. This specification covers the requirements for corrosion inhibiting, chemical and solvent resistant, solvent-borne, epoxy primer coatings that have a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L)(2.8 pounds per gallon [lb/gal]).

MIL-PRF-23377J (AMENDMENT 2), PERFORMANCE SPECIFICATION PRIMER COATINGS: EPOXY, HIGH-SOLIDS

MIL-PRF-23377J (AMENDMENT 2), PERFORMANCE SPECIFICATION PRIMER COATINGS: EPOXY, HIGH-SOLIDS. This specification covers corrosion inhibiting, chemical and solvent resistant, solvent-borne, high-solids epoxy primer coatings that have a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L)(2.8 pounds per gallon [lb/gal]).

MIL-PRF-23699F, PERFORMANCE SPECIFICAITON LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE, NATO CODE NUMBER O-156 (21 MAY 1997) [SUPERSEDING MIL-L-23699E]

MIL-PRF-23699F, PERFORMANCE SPECIFICATION LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE, NATO CODE NUMBER O-156 (21 MAY 1997) [SUPERSEDING MIL-L-23699E]. This specification covers three classes of gas turbine engine lubricating oils, primarily used for aircraft engines, which have a nominal viscosity of 5 centistokes at 100 Deg. C and which are typically made with neopentyl polyol ester base stocks. This oil is identified by NATO Code Number 0-156.

MIL-PRF-23827C (W/ AMENDMENT 2), MILITARY SPECIFICATION, PERFORMANCE SPECIFICATION, GREASE, AIRCRAFT AND INSTRUMENT, GEAR AND ACTUATOR SCREW (29 SEP 2006) [SUPERSEDING MIL-G-23827C W/ AMENDMENT 1)

MIL-PRF-23827C (W/ AMENDMENT 2), MILITARY SPECIFICATION, PERFORMANCE SPECIFICATION, GREASE, AIRCRAFT AND INSTRUMENT, GEAR AND ACTUATOR SCREW (29 SEP 2006) [SUPERSEDING MIL-G-23827C W/ AMENDMENT 1)., This specification covers the requirements for one grade of grease for use at extremely low temperatures on aircraft and instruments. This grease is effective in the temperature range from -73° to 121°C. The type I grease is identified by NATO code Number G-354 (see 6.8).

MIL-PRF-24021K, ELECTRIC POWER MONITORS, PERFORMANCE SPECIFICATION EXTERNAL, AIRCRAFT

MIL-PRF-24021K, ELECTRIC POWER MONITORS, PERFORMANCE SPECIFICATION EXTERNAL, AIRCRAFT. This specification covers electric power monitors which are installed in aircraft to monitor external electric power to prevent power outside the limits of this specification from being applied to equipment in the aircraft.

MIL-PRF-24139A (AMENDMENT 3), GREASE, MULTIPURPOSE, WATER RESISTANT (12 MAR 1987) [SUPERSEDING AMENDMENT 2 AND MIL-G-24139 (SHIPS)]

MIL-PRF-24139A (AMENDMENT 3), GREASE, MULTIPURPOSE, WATER RESISTANT (12 MAR 1987) [SUPERSEDING AMENDMENT 2 AND MIL-G-24139 (SHIPS)].

MIL-PRF-24139A, GREASE, MULTIPURPOSE, WATER RESISTANT (1 MAY 1984) [SUPERSEDING MIL-G-24139 (SHIPS)]

MIL-PRF-24139A, GREASE, MULTIPURPOSE, WATER RESISTANT (1 MAY 1984)[SUPERSEDING MIL-G-24139 (SHIPS)]., This specification covers one grade of grease for multipurpose usage in applications requiring water resistance. It is to be used at temperatures ranging from 0 degrees Fahrenheit (*F) to 230 Deg. F (110 degrees Celsuis (*C)) in all shipboard applications requiring dispensing through long lengths of tubing. Temperature range for use in ball and roller bearing applications is minus 20 to 250 Deg. F.

MIL-PRF-24236/29, PERFORMANCE SPECIFICATION SHEET SWITCHES, THERMOSTATIC, (BIMETALLIC), TYPE I, HERMETICALLY SEALED, SINGLE POLE, SINGLE THROW (SPST),

MIL-PRF-24236/29, PERFORMANCE SPECIFICATION SHEET SWITCHES, THERMOSTATIC, (BIMETALLIC), TYPE I, HERMETICALLY SEALED, SINGLE POLE, SINGLE THROW (SPST), 10 AMPERE (21 OCT 2006)., The requirements for acquiring the switches described herein shall consist of this specification and the latest issue of MIL-PRF-24236.

MIL-PRF-24236C (SUPPLEMENT 1), PERFORMANCE SPECIFICATION SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR (2 MAR 2001) [SUPERSEDING MIL-S-24236B]

MIL-PRF-24236C (SUPPLEMENT 1), PERFORMANCE SPECIFICATION SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR (2 MAR 2001) [SUPERSEDING MIL-S-24236B].

MIL-PRF-24236C, PERFORMANCE SPECIFICATION SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR (3 SEP 1999) [SUPERSEDING MIL-S-24236B]

MIL-PRF-24236C, PERFORMANCE SPECIFICATION SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR (3 SEP 1999) [SUPERSEDING MIL-S-24236B]., This specification covers the general requirements for metallic-element actuated, thermostatic switches intended primarily for use in electrical and electronic equipment, in alternating current (ac) and direct current (dc) applications, where temperature protection, overheat detection, or accurate temperature control is required. The operating temperatures and operating temperature ranges of switches are covered by this specification (see 3.1 and 6.2.2).

MIL-PRF-24236D (SUPPLEMENT 1), PERFORMANCE SPECIFICATION SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR (5 APR 2006)

MIL-PRF-24236D (SUPPLEMENT 1), PERFORMANCE SPECIFICATION SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR (5 APR 2006).

MIL-PRF-24236D, PERFORMANCE SPECIFICATION SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR (5 APR 2006)

MIL-PRF-24236D, PERFORMANCE SPECIFICATION SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR (5 APR 2006)., This specification covers the general requirements for metallic-element actuated, thermostatic switches intended primarily for use in electrical and electronic equipment, in alternating current (ac) and direct current (dc) applications, where temperature protection, overheat detection, or accurate temperature control is required. The operating temperatures and operating temperature ranges of switches are covered by this specification (see 3.1 and 6.2.2).

MIL-PRF-24308D, PERFORMANCE SPECIFICATION SPECIFICATION CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANE

MIL-PRF-24308D, PERFORMANCE SPECIFICATION SPECIFICATION CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR (15 JUL 1996)., This specification covers the performance requirements for nonenvironmental, polarized shell, miniature, rack and panel connectors having pin and socket, crimp (removable), solder (nonremovable), or insulation displacement (nonremovable) contacts with rigid or float mounting, designed for -55EC to +125EC operating temperature.

MIL-PRF-24613A(SH), PERFORMANCE SPECIFICATION DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC (3 NOV 2007)

MIL-PRF-24613A(SH), PERFORMANCE SPECIFICATION DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC (3 NOV 2007)., This specification establishes the performance requirements for cosmetic polymeric deck covering materials to be applied either directly over primed or unprimed, clean steel and aluminum interior deck surfaces, or over deck covering underlay materials conforming to MIL-PRF-3135, that provide a wear resistant, low maintenance deck surface.

MIL-PRF-24635C(SH)(w/INTERIM AMENDMENT 1) PERFORMANCE SPECIFICATION ENAMEL, SILICONE ALKYD COPOLYMER (26 JUN 2006)

MIL-PRF-24635C(SH)(w/INTERIM AMENDMENT 1) PERFORMANCE SPECIFICATION ENAMEL, SILICONE ALKYD COPOLYMER (26 JUN 2006). , This specification covers copolymerized silicone alkyd enamel for use on primed, smooth metal, glass reinforced plastic (GRP), wood and plastic/composite surfaces. Enamels to FED-STD-595 color numbers 26173, 26270, 26373 and 26008 qualified to this specification are low solar absorbent (see 3.6 and Table VI). Two of these enamels (color numbers 26008 and 26270 to FED-STD-595) may also be qualified to this specification with anti-stain properties (see 3.7).

MIL-PRF-24712A, MILITARY SPECIFICATION COATINGS, POWDER (25 MAY 1995)

MIL-PRF-24712A, MILITARY SPECIFICATION COATINGS, POWDER (25 MAY 1995), This specification covers powder coatings for interior steel, aluminum, copper-nickel and bronze equipment, furniture, and electrical box surfaces and on exterior steel, aluminum, copper-nickel, and bronze surfaces exposed to marine atmosphere, high humidity, seawater and weathering.

MIL-PRF-24758A (SH), PERFORMANCE SPECIFICATION CONDUIT SYSTEMS, FLEXIBLE, WEATHERPROOF (24 SEP 2004)

MIL-PRF-24758A (SH), PERFORMANCE SPECIFICATION CONDUIT SYSTEMS, FLEXIBLE, WEATHERPROOF (24 SEP 2004)., This specification covers the performance requirements for weatherproof flexible conduit systems (see 6.3.12) for use primarily in exposed areas (see 6.3.10) on U.S. Navy ships, to shield against electromagnetic (EM) radiation from own-ship transmitters and emissions external to the ship, electromagnetic pulse (EMP) (see 6.3.8) events, and to minimize corrosion (see 6.3.6) while being field repairable to reduce maintenance.

MIL-PRF-25690B (AMENDMENT 1), PERFORMANCE SPECIFICATION PLASTIC, SHEETS, AND FORMED PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK PROPAGATION RESIST

MIL-PRF-25690B (AMENDMENT 1), PERFORMANCE SPECIFICATION PLASTIC, SHEETS, AND FORMED PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK PROPAGATION RESISTANT (27 JUN 1995).

MIL-PRF-26626F, MILITARY SPECIFICATION HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN (5 FEB 2008)

MIL-PRF-26626F, MILITARY SPECIFICATION HOSE ASSEMBLY, REINFORCED, CRYOGENIC, OXYGEN (5 FEB 2008)., This specification covers reinforced cryogenic oxygen hose assemblies with flared tube style fittings.

MIL-PRF-27210G, PERFORMANCE SPECIFICATION (4 APR 1997) [SUPERSEDING MIL-O-27210F]

MIL-PRF-27210G, PERFORMANCE SPECIFICATION (4 APR 1997) [SUPERSEDING MIL-O-27210F]., This specification covers the requirements for two types of aviator’s breathing oxygen.

MIL-PRF-27401E, PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, NITROGEN (23 FEB 2007)

MIL-PRF-27401E, PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, NITROGEN (23 FEB 2007)., This specification covers the requirements for three grades and two types of nitrogen.

MIL-PRF-27401F, PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, NITROGEN (10 JAN 2008)

MIL-PRF-27401F, PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, NITROGEN (10 JAN 2008)., This specification covers the requirements for three grades and two types of nitrogen.

MIL-PRF-27402C, PERFORMANCE SPECIFICATION PROPELLANT, HYDRAZINE uns-DIMETHYLHYDRAZINE (50% N2H4 - 50% UDMH)

MIL-PRF-27402C, PERFORMANCE SPECIFICATION PROPELLANT, HYDRAZINE uns-DIMETHYLHYDRAZINE (50% N2H4 - 50% UDMH). This specification covers the requirements for hydrazine - uns-dimethylhydrazine (N2H4 - UDMH) propellant.

MIL-PRF-28000A (AMENDMENT 1), PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES AP

MIL-PRF-28000A (AMENDMENT 1), PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROTOCOLS (14 DEC 1992)., To all holders of MIL-PRF-28000A, make the following pen and ink changes.

MIL-PRF-28000A, PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROT

MIL-PRF-28000A, PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROTOCOLS (10 FEB 1992)., This specification identifies the requirements to be met when product definition data is delivered in the digital format of the Initial Graphics Exchange Specification (IGES, in accordance with the American National Standard (ANS) / United States Product Data Association (US PRO) standard. Discrete subsets and application protocols of the IGES entities are identified by class according to the application for which the digital data was prepared.

MIL-PRF-28000B, PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROT

MIL-PRF-28000B, PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROTOCOLS (30 SEP 1999)., This specification identifies the requirements to be met when product definition data is delivered in the digital format of the Initial Graphics Exchange Specification (IGES, in accordance with the American National Standard (ANS) / United States Product Data Association (US PRO) standard. Discrete subsets and application protocols of the IGES entities are identified by class according to the application for which the digital data was prepared.

MIL-PRF-28001C, PERFORMANCE SPECIFICATION MARKUP REQUIREMENTS AND GENERIC STYLE SPECIFICATION FOR EXCHANGE OF TEXT AND ITS PRESENTATION (2 MAY 1997)

MIL-PRF-28001C, PERFORMANCE SPECIFICATION MARKUP REQUIREMENTS AND GENERIC STYLE SPECIFICATION FOR EXCHANGE OF TEXT AND ITS PRESENTATION (2 MAY 1997)., To set forth the overall requirements for the creation and management of Standard Generalized Markup Language (SGML) applications. This specification defines performance characteristics for the following SGML applications: a. Document type declaration. b. Document Type Definition (DTD). c. Document instance. d. Formatting Output Specification Instance (FOSI).

MIL-PRF-28002C, PERFORMANCE SPECIFICATION RASTER GRAPHICS REPRESENTATION IN BINARY FORMAT, REQUIREMENTS FOR (30 SEP 1997)

MIL-PRF-28002C, PERFORMANCE SPECIFICATION RASTER GRAPHICS REPRESENTATION IN BINARY FORMAT, REQUIREMENTS FOR (30 SEP 1997)., This specification identifies the requirements to be met when raster data represented in digital, binary format are delivered to the Government.

MIL-PRF-28800F, MILITARY SPECIFICATION TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR (24 JUN 1996) (S/S M

MIL-PRF-28800F, MILITARY SPECIFICATION TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR (24 JUN 1996) (S/S MIL-T-28800E)., This specification covers the general requirements for test equipment (see 6.5.2.14) used in testing and calibrating electrical and electronic equipment. The test equipment may be of commercial design and includes general purpose, special purpose, peculiar, console mounted, automatic test equipment (ATE), and calibration standards. This specification should also be used for built-in test equipment (BITE) (see 6.5.2.6) when the requirements for built-in test (BIT) (see 6.5 .2.5) are not included in the system specification. Detailed requirements for particular test equipment should be tailored in a purchase description (see 6.5.2.22) for that equipment.

MIL-PRF-28876E, PERFORMANCE SPECIFICATION CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, GENERAL SPECIFICAT

MIL-PRF-28876E, PERFORMANCE SPECIFICATION CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, GENERAL SPECIFICATION FOR (4 OCT 2004) [SUPERSEDING MIL-C-28876D]., This specification covers the performance requirements for circular, plug and receptacle style, multiple removable termini, fiber optic connectors that are for Department of Defense applications and that are compatible with multiple transmission element cables. Fiber optic connectors specified herein cover a family of general purpose, interconnection hardware providing a variety of compatible optical coupling arrangements. Connector parts specified within this specification include connector shells, connector inserts, connector insert retention nuts, connector backshells, and connector dust caps.

MIL-PRF-29250C, PERFORMANCE SPECIFICATION LOADING JACK SYSTEM, ISO CONTAINER (24 JUN 1997) [SUPERSEDING MIL-L-29250B (YD)]

MIL-PRF-29250C, PERFORMANCE SPECIFICATION LOADING JACK SYSTEM, ISO CONTAINER (24 JUN 1997) [SUPERSEDING MIL-L-29250B (YD)]., This specification covers the International Organization of Standardization (ISO) container loading jack system (ILJS) which is used to provide level loading and unloading on aircraft. The ILJS also is used to provide on and off loading of 102-inch (2 591 millimetre (mm)) wide flatbed trailers and all 25K-loaders, and mobility and maneuverability for freight containers having ISO corner fittings (hereinafter referred to as ISO containers).

MIL-PRF-29607 (AMENDMENT 1), PERFORMANCE SPECIFICATION CLEANING COMPOUND, AVIONICS COMPONENTS, NON-OZONE DEPLETING (25 NOV 1997)

MIL-PRF-29607 (AMENDMENT 1), PERFORMANCE SPECIFICATION CLEANING COMPOUND, AVIONICS COMPONENTS, NON-OZONE DEPLETING (25 NOV 1997)., This amendment forms a part of MIL-PRF-29607(AS), dated 19 September 1996, and is approved for use by the Naval Air Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-29607 (AS), PERFORMANCE SPECIFICATION CLEANING COMPOUND, AVIONICS COMPONENTS, NON-OZONE DEPLETING (19 SEP 1996)

MIL-PRF-29607 (AS), PERFORMANCE SPECIFICATION CLEANING COMPOUND, AVIONICS COMPONENTS, NON-OZONE DEPLETING (19 SEP 1996)., This specification establishes the requirements for an aqueous cleaning compound to be used in ultrasonic and immersion cleaning of avionics components.

MIL-PRF-29608A, PERFORMANCE SPECIFICATION CLEANING AND CLEANING-LUBRICATING COMPOUNDS, ELECTRICAL CONTACT (31 MAR 2008)

MIL-PRF-29608A, PERFORMANCE SPECIFICATION CLEANING AND CLEANING-LUBRICATING COMPOUNDS, ELECTRICAL CONTACT (31 MAR 2008)., This specification covers cleaning and cleaning-lubricant aerosol compounds that do not contain Ozone Depleting Substances (ODSs) for use on electrical contacts, connectors, and switches.