MIL-PRF-121G, PERFORMANCE SPECIFICATION BARRIER MATERIALS, GREASEPROOF, WATERPROOF, FLEXIBLE, HEAT-SEALABLE (30 APR 2001) [SUPERSEDING MIL-B-121F]., This specification establishes the requirements for heat-sealable, greaseproof, waterproof, flexible barrier material used for the preservation of military supplies and equipment (see 6.1).

MIL-PRF-122A (AMENDMENT 4), PERFORMANCE SPECIFICATION, RESISTORS, FIXED, PRECISION, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (24 APR 1995) [SUPERSEDING MIL-R-122] [S/S BY DSCC DWGS 97009, 97010 AND 97011].

MIL-PRF-122A, PERFORMANCE SPECIFICATION, RESISTORS, FIXED, PRECISION, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (19 FEB 1990) [SUPERSEDING MIL-R-122] [S/S BY DSCC DWGS 97009, 97010 AND 97011]., This specification covers the general requirements for hermetically sealed, high precision, low reactance, fixed, resistors that possess a high degree of stability with respect to time under severe life failure rates ranging from 1 percent to 0.001 percent per 1,000 hours (see 1.2.1.2). These failure rates are established at 60percent confidence on the basis of life tests.

MIL-PRF-123/10B, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, NONLEADED, STYLE CKS51 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/11C, PERFORMANCE SPEFICICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPARATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, NONLEADED, STYLE CKS52 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/12C, PERFORMANCE SPEFICICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPARATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, NONLEADED, STYLE CKS52 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/13C, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPARATUR STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, NONLEADED, STYLE CKS54 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/16A, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPARATUR STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS22 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/1C, PERFORMANCE SPEFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPARATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, STYLE CKS05 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/3D, PERFORMANCE SPEFICICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPARATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS07 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/4C, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS11 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/5B, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS12 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/6C, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS14 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/7C, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS15 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123/8B, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS16 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-123C (SUPPLEMENT 1), PERFORMANCE SPECIFICATION, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, GENERAL SPECIFICATION FOR (27 MAR 2003)., This supplement forms a part of MIL-PRF-123C, dated 27 March 2003.

MIL-PRF-123C, PERFORMANCE SPECIFICATION, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, GENERAL SPECIFICATION FOR (27 MAR 2003)., This specification covers the general requirements for high reliability, general purpose (BX and BR) and temperature stable (BP and BG) ceramic dielectric fixed capacitors, leaded and nonleaded for space, missile, and other high reliability applications. Capacitors covered by this specification may be used in critical frequency determining applications, timing circuits, and other applications where absolute stability is required (BP and BG), and in applications where appreciable variations in capacitance with respect to temperature, voltage, frequency, and life can be tolerated (BX and BR). Life tests in this specification are performed at two times rated voltage at maximum rated temperature, and an assumed acceleration factor of 8:1 is used to relate life test data obtained at two times rated voltage to performance at rated voltage

MIL-PRF-123D, PERFORMANCE SPECIFICATION, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, GENERAL SPECIFICATION FOR (28 SEP 2007) [SUPERSEDING MIL-C-123A]., This specification covers the general requirements for high reliability, general purpose (BX and BR) and temperature stable (BP and BG) ceramic dielectric fixed capacitors, leaded and nonleaded for space, missile, and other high reliability applications. Capacitors covered by this specification may be used in critical frequency determining applications, timing circuits, and other applications where absolute stability is required (BP and BG), and in applications where appreciable variations in capacitance with respect to temperature, voltage, frequency, and life can be tolerated (BX and BR). Life tests in this specification are performed at two times rated voltage at maximum rated temperature, and an assumed acceleration factor of 8:1 is used to relate life test data obtained at two times rated voltage to performance at rated voltage.

MIL-PRF-131K, PERFORMANCE SPECIFICATION, BARRIER MATERIALS, WATER VAPOR-PROOF, GREASE-PROOF, FLEXIBLE, HEAT-SEALABLE. This specification covers the requirements for heat-sealable, greaseproof, flexible barrier materials having low water vapor transmission characteristics for use in military packaging.

MIL-PRF-131K, PERFORMANCE SPECIFICATION, BARRIER MATERIALS, WATER VAPORPROOF, GREASEPROOF, FLEXIBLE, HEAT-SEALABLE (18 AUG 2005)., This specification covers the requirements for heat-sealable, greaseproof, flexible barrier materials having low water vapor transmission characteristics for use in military packaging.

MIL-PRF-2016A, PERFORMANCE SPECIFICATION CELL, GAS PHASE, ADSORBER (22 APR 2004)., This specification covers gas phase adsorber cells used to remove toxic chemical va- pors exhausted from laboratory air filtration systems. This specification does not include require- ments for the housing into which these adsorber cells are installed.

MIL-PRF-20K (SUPPLEMENT 1), PERFORMANCE SPECIFICATION, PERFORMANCE SPECIFICATION CAPACITOR, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (14 NOV 2003) [SUPERSEDING MIL-C-20G]., This supplement forms a part of MIL-PRF-20K, dated 14 November 2003.

MIL-PRF-20K, PERFORMANCE SPECIFICATION, PERFORMANCE SPECIFICATION CAPACITOR, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (14 NOV 2003) [SUPERSEDING MIL-C-20G]., This specification covers the general requirements for established reliability (ER) and non-ER, temperature compensating, fixed capacitors for use primarily where compensation is necessary for circuit applications due to temperature changes, in bypass and coupling applications. Capacitors meeting the ER requirements specified herein have a failure rate level (FRL) ranging from 1.0 percent per 1,000 hours to 0.00l percent per 1,000 hours. These failure rate levels are established at a 90-percent confidence level based on the life test parameters specified and are maintained at a 10-percent producer's risk. An acceleration factor of 8:1 has been used to relate the life test data at 200 percent of rated voltage at the applicable high test temperature to the rated voltage at the applicable high test temperature. A part per million (ppm) quality system is used for documenting and reporting the average outgoing quality of ER capacitors supplied to this specification. Statistical process control (SPC) techniques are required in the manufacturing process to minimize variation in production of ER capacitors supplied to the requirements of this specification.

MIL-PRF-2104H, PERFORMANCE SPECIFICATION LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE (12 JUL 2004)., This performance specification covers engine oils suitable for lubrication of reciprocating compression-ignition internal combustion engines and for power transmission fluid applications in combat/tactical service equipment (see 6.1).

MIL-PRF-2105E, PERFORMANCE SPECIFICATION LUBRICATING OIL, GEAR, MULTIPURPOSE (22 AUG 1995) [SUPERSEDING MIL-L-2105D] [S/S BY SAE-J2360]., This performance specification covers multipurpose gear-lubricating oils (see 6.1)

MIL-PRF-26H, PERFORMANCE SPECIFICATION, RESISTORS, FIXED, WIRE WOUND (POWER TYPE) GENERAL SPECIFICATION FOR (15 SEP 2006)., This specification covers the general requirements for power type, wire-wound, fixed resistors for use in electrical, communications, and associated equipment. Included are general purpose styles of 5 percent initial resistance tolerance, with power ratings ranging from 3 watts to 240 watts at 25OC, derated to 0 power at 350OC (characteristics N and V) and precision axial lead types of .1(B) percent, .5 (D) percent, and 1 (F) percent initial resistance tolerances with power ratings ranging from 1 watt to 10 watts at 25OC, derated to 0 power at 250OC (characteristic U).

MIL-PRF-27F (SUPPLEMENT 1), PERFORMANCE SPECIFICATION TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR (25 FEB 2001). This supplement forms a part of MIL-PRF-27F, dated 25 June 1999.

MIL-PRF-27F, PERFORMANCE SPECIFICATION TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR (25 JUN 1999) [SUPERSEDING MIL-T-27E]., This specification covers the general requirements for power transformers, power inductors, audio transformers, audio inductors, high power pulse transformers, charging inductors, saturable transformers and saturable inductors for use in electronic and communication equipment. This specification covers transformers and inductors weighing 300 pounds or less or having root-mean-square (rms) test-voltage ratings 0f 50,000 volts or less, and also high-power pulse transformers where the peak pulse power is greater than 5 watts. Transformer and inductor assemblies incorporating any other active or passive components do not come within the scope of this specification.

MIL-PRF-3135G (AMENDMENT 4), PERFORMANCE SPECIFICATION, DECK COVERING UNDERLAY MATERIALS (14 NOV 1986)., This amendment forms a part of MIL-D-3135G, dated 21 March 1983, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-3135G, PERFORMANCE SPECIFICATION, DECK COVERING UNDERIAY MATERIALS (21 MAR 1983)., This specification covers deck covering underlay materials to smooth the surfaces of steel decks before applying deck covering materials .

MIL-PRF-3150D, PERFORMANCE SPECIFICATION LUBRICATING OIL, PRESERVATIVE, MEDIUM (6 FEB 1997) [SUPERSEDING MIL-L-3150C]., This specification covers one grade of preservative lubricating oil, identified by Military Symbol PL-M and NATO Code Number 0-192.

MIL-PRF-3420G (w/AMENDMENT 1), PERFORMANCE SPECIFICATION, PACKAGING MATERIALS, VOLATILE CORROSION, INHIBITOR TREATED, OPAQUE (14 JUL 2004)., This specification covers packaging materials (carriers) which have been treated either by coating or impregnating with a corrosion inhibitor.

MIL-PRF-3420H, PERFORMANCE SPECIFICATION, WRAPPING MATERIALS, VOLATILE CORROSION INHIBITOR TREATED, OPAQUE (31 MAR 2008) [SUPERSEDING MIL-P-3420F]., This specification covers wrapping materials (carriers) which have been treated either by coating or impregnating with a corrosion inhibitor.

MIL-PRF-3572B (AMENDMENT 1), PERFORMANCE SPECIFICATION, LUBRICANT, COLLOIDAL GRAPHITE IN OIL (30 SEP 2002) [SUPERSEDING MIL-L-3572A]., This amendment forms a part of MIL-PRF-3572B, dated 21 January 2000, and is approved for use by all departments and agencies of the Department of Defense.

MIL-PRF-3572B (NOTICE 1), PERFORMANCE SPECIFICATION, LUBRICANT, COLLOIDAL GRAPHITE IN OIL (17 APR 2008) [SUPERSEDING MIL-L-3572A]., MIL-PRF-3572B, dated 30 September 2002, has been reviewed and determined to be valid for use in acquisition.

MIL-PRF-3572B, PERFORMANCE SPECIFICATION, LUBRICANT, COLLOIDAL GRAPHITE IN OIL (21 JAN 2000) [SUPERSEDING MIL-L-3572A]., This specification covers colloidal graphite in oil lubricant primarily for ordnance but may be used for other purposes (see 6.1).

MIL-PRF-3627G, PERFORMANCE SPECIFICATION PENETROMETERS, SOIL: DIAL INDICATING AND SPRING INDICATING [SUPERSEDING MIL-P-3627]., This specification covers penetrometers used to determine the penetration resistance and degree of compaction of soils.

PERFORMANCE SPECIFICATION MIL-PRF-4556F (AMENDMENT 1), PERFORMANCE SPECIFICATION COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (16 FEB 1999)., This amendment forms a part of MIL-PRF-4556F, dated 15 December 1998, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-4556F (AMENDMENT 1), PERFORMANCE SPECIFICATION, COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (16 FEB 1999)., This amendment forms a part of MIL-PRF-4556F, dated 15 December 1998, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-4556F, PERFORMANCE SPECIFICATION COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (15 DEC 1998)., This specification covers a two-component epoxy coating system for protecting interior surfaces of steel tanks used for the transportation and storage of fuels. The coating, furnished as a kit, is lead and chromate free and has a maximum volatile organic compound (VOC) content of 340 grams/liter.

MIL-PRF-5041K (SUPPLEMENT 1), PERFORMANCE SPECIFICATION, TIRES, RIBBED TREAD, PNEUMATIC, AIRCRAFT (20 FEB 2007) [SUPERSEDING MIL-T-5041H]., This supplement forms a part of MIL-PRF-5041K, 20 February 2007

MIL-PRF-5041K, PERFORMANCE SPECIFICATION, TIRES, RIBBED TREAD, PNEUMATIC, AIRCRAFT (20 FEB 2007) [SUPERSEDING MIL-T-5041H]., This specification covers requirements for aircraft pneumatic tube type and tubeless ribbed tread tires intended for use on aircraft wheels.

MIL-PRF-5096F, PERFORMANCE SPECIFICATION, MANUALS, TECHNICAL - INSPECTION AND MAINTENANCE REQUIREMENTS; ACCEPTANCE AND FUNCTIONAL CHECK FLIGHT PROCEDURES AND CHECKLISTS; INSPECTION WORK CARDS; AND CHECKLISTS; PREPARATION OF (1 MAR 1996) [SUPERSEDING MIL-M-5096E(USAF)]., This performance specification covers the requirements for the preparation of inspection and maintenance requirements (-6) manuals, acceptance and functional check flight procedures (-6CF) manuals, functional check flight (-6CL) checklists, inspection (-6WC) work cards, and inspection flow/sequence charts. This performance specification also covers the general requirements for all checklists, and specific requirements for maintenance checklists (as applicable to aircraft, Communication Electronic (CE) equipment, air/ground launched missiles, drones, support/systems equipment, rockets and electronic systems). Some systems may require an inspection requirements manual only, or work cards only. For other systems a combination of both inspection manual and work cards may be more suitable. In addition to �paper� delivery, this specification provides for electronic delivery of data through the use of the Document Type Definitions (DTD) contained in Appendixes A through F.

MIL-PRF-5350F, PERFORMANCE SPECIFICATION, TRANSMITTER, SYNCHRO OPERATED, AIRCRAFT, GENERAL SPECIFICATION FOR (28 FEB 1998) [SUPERSEDING MIL-T-5350E]., This general specification covers aircraft synchro transmitters (see 6.3.2).

MIL-PRF-5480G, PERFORMANCE SPECIFICATION DATA, ENGINEERING AND TECHNICAL: REPRODUCTION. With this revision the conversion to a Performance Specification is complete. Previously, in Revision F, MIL-D-5480 incorporated the content of MIL-D-8510, which was then canceled. MIL-PRF-5480G provides performance criteria for the production, preparation for delivery, and shipment of non-digital reproducible and nonreproducible reproductions of engineering data. This specification addresses only non-digital media reproductions of original documents regardless of the media in which the original document may exist.

MIL-PRF-5480G, PERFORMANCE SPECIFICATION, DATA, ENGINEERING AND TECHNICAL: REPRODUCTION (1 JUL 1998)., This specification covers the requirements for the production, preparation for delivery, and shipment of non-digital reproducible and nonreproducible reproductions of drawings, associated lists, and related engineering and technical data. The original documents from which these reproductions are produced may be manually or computer generated and are not addressed by this specification. For the purposes of this specification, the direct output from a digital source is considered the original from which non-digital reproductions meeting the requirements herein are produced.

MIL-PRF-5503F, PERFORMANCE SPECIFICATION ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR (26 JUN 1998)., This specification establishes the general requirements for hydraulic linear actuators used in any aircraft hydraulic system except for those associated with flight controls.

MIL-PRF-5606H (AMENDMENT 3), PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 SEP 2006)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54°C to +135°C temperature range (see 6.1). This fluid is identified by military symbol OHA and NATO Code No. H-515 (see 6.5).

MIL-PRF-5606H, PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 JUN 2002) (SUPERSEDING MIL-H-5606G)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54°C to +135°C temperature range (see 6.1). This fluid is identified by military symbol OHA and NATO Code No. H-515 (see 6.5).

MIL-PRF-5920F (USAF), PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: SAMPLE BASIC WEIGHT CHECKLISTS AND LOADING DATA (11 JUL 1996) [SUPERSEDING MIL-M-5920E)., This specification covers the preparation of the Sample Basic Weight Checklists and Loading Data aircraft manuals. These manuals consist of TO 1X-XXXX-5-1, Sample Basic Weight Checklists (Chart A) and TO 1X-XXXX-5-2, Loading Data (Chart E) as approved for use in TO 1-1B- 40 and development under provisions of MIL-W-25140. In addition to "paper" delivery, this specification provides for electronic delivery of data through the use of the Document Type Definitions (DTD) contained in Appendixes A and B.

MIL-PRF-6081D, PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE (10 NOV 1997) [SUPERSEDING MIL-L-6081C]., This specification covers the requirements for two grades of jet engine lubricating oil.

MIL-PRF-6106L (SUPPLEMENT 1), PERFORMANCE SPECIFICATION RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (10 NOV 2000) [SUPERSEDING MIL-PRF-6106K & MIL-R-6106J].

MIL-PRF-6106L, PERFORMANCE SPECIFICATION RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (10 NOV 2000) [SUPERSEDING MIL-PRF-6106K & MIL-R-6106J]., This specification establishes general requirements for electromechanical relays with contact ratings from 25 amperes resistive (unless otherwise specified) and upward for use in electrical applications. Auxiliary contacts may be rated at lower currents. Relays covered by this specification are capable of meeting the electrical and environmental requirements when mounted directly to the structure of aircraft, missile, spacecraft, ship, and other primary vehicles or in ground support and shipboard equipment. Other ratings may be as specified (see 3.1). CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.

MIL-PRF-680B, PERFORMANCE SPECIFICATION DEGREASING SOLVENT (26 OCT 2006)., This specification covers degreasing solvent that consists of four types of petroleum distillates. The different types are referred to as "Stoddard solvent", "141 degrees Fahrenheit (degrees F) (60.6 degrees Celsius (degrees C)) solvent", "200 degrees F (93.3 degrees C) solvent", and "141 degrees F d-limonene blended solvent". They are used for degreasing of machine parts in equipment maintenance.

MIL-PRF-7024E, MILITARY SPECIFICATION, CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS (1 OCT 1997) [SUPERSEDING MIL-C-7024D]., This specification covers the requirements for three types of calibrating fluid used in the calibration of aircraft fuel system components.

MIL-PRF-7024E, PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS (1 OCT 1997)., This specification covers the requirements for three types of calibrating fluid used in the calibration of aircraft fuel system components.

MIL-PRF-7700GF (USAF), DETAILED SPECIFICATION FLIGHT MANUALS, AIR REFUELING PROCEDURES, AND ABBREVIATED CHECKLISTS (1 MAR 1996) (SUPERSEDING MIL-M-7700E (USAF)., This specification covers the requirements for the preparation of four (4) types of flight manuals and three (3) types of abbreviated flight manual checklists for all types of aircraft. This specification contains appendices which will allow for the tagging of flight manual information for digital delivery to the government. These will allow the flight manual to be prepared in either a paper or electronic presentation. Appendices A through C provide the Document Type Definitions (DTD) required to prepare the manuals specified herein. Adherence to this specification is essential to assure maximum standardization of the flight manual program; however, requirements that are not applicable to a specific aircraft will not be included. Further, any features applicable to a specific aircraft, but not specified herein, will be included in the manual unless waived by the acquiring activity (see 6.2).

MIL-PRF-7726K, PERFORMANCE SPECIFICATION, RETREAD TIRES, RIBBED TREAD, PNEUMATIC AIRCRAFT (20 FEB 2007) [SUPERSEDING MIL-R-7726H]., This specification covers the requirements for a retreaded bias ply or radial ply aircraft tire, which has had a worn casing restored by renewing the tread material or the tread and sidewall material. A rebuilt aircraft pneumatic tire may be a tube-type or tubeless ribbed and is intended for use on an aircraft wheel. The drawing and slash sheet matrix (shown as Table I) identifies these retreaded tires by size and ply rating.

MIL-PRF-7726K, PERFORMANCE SPECIFICATION, RETREAD TIRES, RIBBED TREAD, PNEUMATIC AIRCRAFT (20 FEB 2007) [SUPERSEDING MIL-R-7726J]. This supplement forms a part of MIL-PRF-7726K, 22 February 2007.

MIL-PRF-7808L, PERFORMANCE SPECIFICATION LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE (2 MAY 1997) [SUPERSEDING MIL-L-7808K]., This specification covers the requirements for two grades of aircraft turbine engine lubricating oil.

MIL-PRF-7870C, PERFORMANCE SPECIFICATION, LUBRICATING OIL: GENERAL PURPOSE, LOW TEMPERATURE (17 FEB 1998) [SUPERSEDING MIL-L-7870B]., This specification covers one grade of general purpose, low temperature lubricating oil. This lubricating oil is identified by NATO Code 0-142 (see 6.4).

MIL-PRF-7907C, PERFORMANCE SPECIFICATION, CLEANING COMPOUND, DECONTAMINATING (FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES) (13 JUL 2007) [SUPERSEDING MIL-C-7907A(WP)]., This specification establishes the requirements for a decontaminating cleaning compound for soiled and radioactive contaminated surfaces that is soluble in water, hard water, and sea water (see 6.1).

MIL-PRF-8031F (USAF), PERFORMANCE SPECIFICATION LIST OF APPLICABLE PUBLICATIONS (LOAP), PREPARATION OF (29 AUG 1996) (SUPERSEDING MIL-L-8031E(USAF))., This performance specification covers the detail requirements for the preparation of the list of publications, referred to throughout this specification as the LOAP. In addition to "paper" delivery, this specification provides for electronic delivery of data through the use of the Document Type Definition (DTD) contained in Appendix A.

MIL-PRF-8184F, PERFORMANCE SPECIFICATION PLASTIC SHEET, ACRYLIC, MODIFIED (5 OCT 1998)., This specification covers optical quality, transparent, modified acrylic plastic sheet.

MIL-PRF-8184F, PERFORMANCE SPECIFICATION, PLASTIC SHEET, ACRYLIC, MODIFIED (5 OCT 1998) [SUPERSEDING MIL-P-8184E]., This specification covers optical quality, transparent, modified acrylic plastic sheet.

MIL-PRF-8188D, PERFORMANCE SPECIFICATION, CORROSION-PREVENTIVE, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE (10 DEC 1997) [SUPERSEDING MIL-C-8188C]., This specification covers the requirements for one type of corrosion-preventive oil for preservation of engines which normally operate on synthetic base oils. This oil is identified by NATO Code Number C-638..

MIL-PRF-8516F, MILITARY SPECIFICATION SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED (31 JUL 1997) (SUPERSEDING MIL-S-8516F)., This specification covers a two-component, chemically cured synthetic rubber compound for insulating, sealing, reinforcing, and corrosion protection of electric connectors, wiring, and other electric apparatus. This specification has provisions for shelf-life extension (see 3.2.4).

MIL-PRF-8565K, MILITARY SPECIFICATION, BATTERY STORAGE, AIRCRAFT, GENERAL SPECIFICATION FOR (25 JUN 2001) [SUPERSEDING MIL-B-8865J)., This specification covers the general requirements for rechargeable aircraft storage batteries. The batteries are nominal 24-volt batteries that are generally used for medium current engine starting/utility applications, have non-removable covers, and designed for maintenance-free operation (see 6.15.10).

MIL-PRF-8805F (SUPPLEMENT 1), PERFORMANCE SPECIFICATION SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR (12 OCT 2006) [SUPERSEDING MIL-S-8805F].

MIL-PRF-8805F (w/ AMENDMENT 1), PERFORMANCE SPECIFICATION SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR (5 DEC 2007) [SUPERSEDING MIL-S-8805F]., This specification covers the general requirements for snap action sensitive switches and switch assemblies. The sensitive switch assemblies include limit, push-button, and toggle operated types. The term switches includes switch assemblies, see 6.5.19. For intended use and application see 6.1. For definitions of terms used in this specification, see 6.5..

MIL-PRF-9000H, PERFORMANCE SPECIFICATION LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL (16 SEP 1987)., This specification covers one grade of lubricating oil, Military Symbol 9250 (NATO Code 0-278), for use in advanced design high-output shipboard main propulsion and auxiliary diesel engines using fuel conforming to MIL-P-16884.

MIL-PRF-900F (NOTICE 1), PERFORMANCE SPECIFICATION RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS., MIL-PRF-900F/MIL-R-900F, DATED 30 MARCH 1973, HAS BEEN REVIEWED AND DETERMINED TO BE VALID FOR USE IN ACQUISITION.

MIL-PRF-900F, PERFORMANCE SPECIFICATION RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS (30 MAR 1973)., This specification covers rubber gasket material for watertight and airtight closures, in the temperature range of -20 Deg. to 130 Deg. F (-28.9 Deg. to 54.4 Deg. C), and other uses.

MIL-PRF-907E (AMENDMENT 2), PERFORMANCE SPECIFICATION ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (SUPERSEDING MIL-A-907D). This specification covers antiseize compound for use on threads of steel nuts, studs, bolts and other mating surfaces, including those of superheated steam installations, at temperatures up to 1050 degrees Fahrenheit (°F) (566 degrees Celsius (°C)).

MIL-PRF-907F, PERFORMANCE SPECIFICATION ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (17 NOV 2004) [SUPERSEDING MIL-A-907D]., . This specification covers antiseize compound for use on threads of steel nuts, studs, bolts and other mating surfaces, including those of superheated steam installations, at temperatures up to 1050 degrees Fahrenheit (°F) (566 degrees Celsius (°C)).

MIL-PRF-914C, PERFORMANCE SPECIFICATION, RESISTOR NETWORKS, FIXED, FILM, SURFACE MOUNT, NON-ESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (22 APR 2008) [SUPERSEDING MIL-R-914]., This specification covers the general requirements for non-established reliability (non-ER) and established reliability (ER), hermetically sealed (see 3.27) and nonhermetically sealed networks (see 3.27.1). These networks consist entirely of fixed, film resistors. They are primarily intended for use in surface mount applications where space is a major concern. ER resistors covered by this specification will have life failure rates (FR) ranging from 1 percent to 0.001 percent per 1,000 hours (see 1.2.1.7). The ER FR are established at a minimum 60-percent confidence level on the basis of life tests.

MIL-PRF-9854C (AMENDMENT 1), PERFORMANCE SPECIFICATION TECHNICAL MANUALS: STRUCTURAL REPAIR (AIRCRAFT) (11 FEB 2002) [SUPERSEDING MIL-M-9854B].

MIL-PRF-9854C, PERFORMANCE SPECIFICATION TECHNICAL MANUALS: STRUCTURAL REPAIR (AIRCRAFT) (29 NOV 1996) [SUPERSEDING MIL-M-9854B]., This specification covers the requirements for technical manuals containing aircraft structural repair instructions, excluding battle damage repair. In addition to paper" delivery, this specification provides for electronic delivery of data.

MIL-PRF-9884, PERFORMANCE SPECIFICATION, PAD, ENERGY DISSIPATOR (27 May 1997) [SUPERSEDING MIL-H-9884E]., This specification covers the performance and acceptance requirements for a pad which dissipates the energy at impact of items that are airdropped

MIL-PRF-9954C, PERFORMANCE SPECIFICATION, GLASS BEADS: FOR CLEANING AND PEENING (31 JAN 2008) [SUPERSEDING MIL-G-9954A]., This specification covers glass beads to be used with pressure/suction type blasting equipment.

MIL-PRF-9977K(USAF)(w/AMENDMENT 1), PERFORMANCE SPECIFICATION MANUALS, TECHNICAL AND CHECKLISTS: MUNITIONS/WEAPONS LOADING PROCEDURES, NONNUCLEAR AND NUCLEAR AND PACKAGES, STANDARD DATA: MUNITIONS LOADING PROCEDURES, NONNUCLEAR (18 DEC 2003)., This document establishes the requirements for preparation of manuals and checklists for loading/unloading nuclear weapons and nonnuclear munitions on aircraft, and for checking various armament systems used to control/release/fire munitions and weapons that are approved for loading on an aircraft. In addition to “paper” delivery, this specification provides for electronic delivery of data through the use of the Document Type Definitions (DTD) contained in Appendixes A through J (see 6.2).