MIL-PRF-121G, PERFORMANCE SPECIFICATION BARRIER MATERIALS, GREASEPROOF, WATERPROOF, FLEXIBLE, HEAT-SEALABLE (30 APR 2001) [SUPERSEDING MIL-B-121F]

MIL-PRF-121G, PERFORMANCE SPECIFICATION BARRIER MATERIALS, GREASEPROOF, WATERPROOF, FLEXIBLE, HEAT-SEALABLE (30 APR 2001) [SUPERSEDING MIL-B-121F]., This specification establishes the requirements for heat-sealable, greaseproof, waterproof, flexible barrier material used for the preservation of military supplies and equipment (see 6.1).

MIL-PRF-131K, PERFORMANCE SPECIFICATION, BARRIER MATERIALS, WATER VAPOR-PROOF, GREASE-PROOF, FLEXIBLE, HEAT-SEALABLE

MIL-PRF-131K, PERFORMANCE SPECIFICATION, BARRIER MATERIALS, WATER VAPOR-PROOF, GREASE-PROOF, FLEXIBLE, HEAT-SEALABLE. This specification covers the requirements for heat-sealable, greaseproof, flexible barrier materials having low water vapor transmission characteristics for use in military packaging.

MIL-PRF-2016A, PERFORMANCE SPECIFICATION CELL, GAS PHASE, ADSORBER (22 APR 2004)

MIL-PRF-2016A, PERFORMANCE SPECIFICATION CELL, GAS PHASE, ADSORBER (22 APR 2004)., This specification covers gas phase adsorber cells used to remove toxic chemical va- pors exhausted from laboratory air filtration systems. This specification does not include require- ments for the housing into which these adsorber cells are installed.

MIL-PRF-2104H, PERFORMANCE SPECIFICATION LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE (12 JUL 2004)

MIL-PRF-2104H, PERFORMANCE SPECIFICATION LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE (12 JUL 2004)., This performance specification covers engine oils suitable for lubrication of reciprocating compression-ignition internal combustion engines and for power transmission fluid applications in combat/tactical service equipment (see 6.1).

MIL-PRF-2105E, PERFORMANCE SPECIFICATION LUBRICATING OIL, GEAR, MULTIPURPOSE (22 AUG 1995) (S/S BY SAE-J2360

MIL-PRF-2105E, PERFORMANCE SPECIFICATION LUBRICATING OIL, GEAR, MULTIPURPOSE (22 AUG 1995) (S/S BY SAE-J2360)., This performance specification covers multipurpose gear-lubricating oils (see 6.1)

MIL-PRF-27F (SUPPLEMENT 1), PERFORMANCE SPECIFICATION TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR (25 FEB 2001)

MIL-PRF-27F (SUPPLEMENT 1), PERFORMANCE SPECIFICATION TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR (25 FEB 2001). This supplement forms a part of MIL-PRF-27F, dated 25 June 1999.

MIL-PRF-27F, PERFORMANCE SPECIFICATION TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR (25 JUN 1999)

MIL-PRF-27F, PERFORMANCE SPECIFICATION TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR (25 JUN 1999)., This specification covers the general requirements for power transformers, power inductors, audio transformers, audio inductors, high power pulse transformers, charging inductors, saturable transformers and saturable inductors for use in electronic and communication equipment. This specification covers transformers and inductors weighing 300 pounds or less or having root-mean-square (rms) test-voltage ratings 0f 50,000 volts or less, and also high-power pulse transformers where the peak pulse power is greater than 5 watts. Transformer and inductor assemblies incorporating any other active or passive components do not come within the scope of this specification.

MIL-PRF-3150D, PERFORMANCE SPECIFICATION LUBRICATING OIL, PRESERVATIVE, MEDIUM (6 FEB 1997) [SUPERSEDING MIL-L-3150C]

MIL-PRF-3150D, PERFORMANCE SPECIFICATION LUBRICATING OIL, PRESERVATIVE, MEDIUM (6 FEB 1997) [SUPERSEDING MIL-L-3150C]., This specification covers one grade of preservative lubricating oil, identified by Military Symbol PL-M and NATO Code Number 0-192.

MIL-PRF-3420G (AMENDMENT 1), PERFORMANCE SPECIFICATION PACKAGING MATERIALS, VOLATILE CORROSION INHIBITOR TREATED, OPAQUE (14 JUL 2004)

MIL-PRF-3420G (AMENDMENT 1), PERFORMANCE SPECIFICATION PACKAGING MATERIALS, VOLATILE CORROSION INHIBITOR TREATED, OPAQUE (14 JUL 2004). This specification covers packaging materials (carriers) which have been treated either by coating or impregnating with a corrosion inhibitor.

MIL-PRF-4556F (AMENDMENT 1), PERFORMANCE SPECIFICATION COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (16 FEB 1999)

PERFORMANCE SPECIFICATION MIL-PRF-4556F (AMENDMENT 1), PERFORMANCE SPECIFICATION COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (16 FEB 1999)., This amendment forms a part of MIL-PRF-4556F, dated 15 December 1998, and is approved for use by all Departments and Agencies of the Department of Defense.

MIL-PRF-4556F, PERFORMANCE SPECIFICATION COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (15 DEC 1998)

MIL-PRF-4556F, PERFORMANCE SPECIFICATION COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (15 DEC 1998)., This specification covers a two-component epoxy coating system for protecting interior surfaces of steel tanks used for the transportation and storage of fuels. The coating, furnished as a kit, is lead and chromate free and has a maximum volatile organic compound (VOC) content of 340 grams/liter.

MIL-PRF-5480G, PERFORMANCE SPECIFICATION DATA, ENGINEERING AND TECHNICAL: REPRODUCTION

MIL-PRF-5480G, PERFORMANCE SPECIFICATION DATA, ENGINEERING AND TECHNICAL: REPRODUCTION. With this revision the conversion to a Performance Specification is complete. Previously, in Revision F, MIL-D-5480 incorporated the content of MIL-D-8510, which was then canceled. MIL-PRF-5480G provides performance criteria for the production, preparation for delivery, and shipment of non-digital reproducible and nonreproducible reproductions of engineering data. This specification addresses only non-digital media reproductions of original documents regardless of the media in which the original document may exist.

MIL-PRF-5503F, PERFORMANCE SPECIFICATION ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR (26 JUN 1998)

MIL-PRF-5503F, PERFORMANCE SPECIFICATION ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR (26 JUN 1998)., This specification establishes the general requirements for hydraulic linear actuators used in any aircraft hydraulic system except for those associated with flight controls.

MIL-PRF-5606H (AMENDMENT 3), PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 SEP 2006)

MIL-PRF-5606H (AMENDMENT 3), PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 SEP 2006)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54°C to +135°C temperature range (see 6.1). This fluid is identified by military symbol OHA and NATO Code No. H-515 (see 6.5).

MIL-PRF-5606H, PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 JUN 2002) (SUPERSEDING MIL-H-5606G)

MIL-PRF-5606H, PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 JUN 2002) (SUPERSEDING MIL-H-5606G)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54°C to +135°C temperature range (see 6.1). This fluid is identified by military symbol OHA and NATO Code No. H-515 (see 6.5).

MIL-PRF-5920F (USAF), PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: SAMPLE BASIC WEIGHT CHECKLISTS AND LOADING DATA (11 JUL 1996) [SUPERSEDING MIL-M-5920E)

MIL-PRF-5920F (USAF), PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: SAMPLE BASIC WEIGHT CHECKLISTS AND LOADING DATA (11 JUL 1996) [SUPERSEDING MIL-M-5920E)., This specification covers the preparation of the Sample Basic Weight Checklists and Loading Data aircraft manuals. These manuals consist of TO 1X-XXXX-5-1, Sample Basic Weight Checklists (Chart A) and TO 1X-XXXX-5-2, Loading Data (Chart E) as approved for use in TO 1-1B- 40 and development under provisions of MIL-W-25140. In addition to "paper" delivery, this specification provides for electronic delivery of data through the use of the Document Type Definitions (DTD) contained in Appendixes A and B.

MIL-PRF-6106L (SUPPLEMENT 1), PERFORMANCE SPECIFICATION RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (10 NOV 2000) [SUPERSEDING MIL-PRF-6106K & MIL-R-6106J]

MIL-PRF-6106L (SUPPLEMENT 1), PERFORMANCE SPECIFICATION RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (10 NOV 2000) [SUPERSEDING MIL-PRF-6106K & MIL-R-6106J].

MIL-PRF-6106L, PERFORMANCE SPECIFICATION RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (10 NOV 2000) [SUPERSEDING MIL-PRF-6106K & MIL-R-6106J]

MIL-PRF-6106L, PERFORMANCE SPECIFICATION RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (10 NOV 2000) [SUPERSEDING MIL-PRF-6106K & MIL-R-6106J]., This specification establishes general requirements for electromechanical relays with contact ratings from 25 amperes resistive (unless otherwise specified) and upward for use in electrical applications. Auxiliary contacts may be rated at lower currents. Relays covered by this specification are capable of meeting the electrical and environmental requirements when mounted directly to the structure of aircraft, missile, spacecraft, ship, and other primary vehicles or in ground support and shipboard equipment. Other ratings may be as specified (see 3.1). CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.

MIL-PRF-680B, PERFORMANCE SPECIFICATION DEGREASING SOLVENT (26 OCT 2006)

MIL-PRF-680B, PERFORMANCE SPECIFICATION DEGREASING SOLVENT (26 OCT 2006)., This specification covers degreasing solvent that consists of four types of petroleum distillates. The different types are referred to as "Stoddard solvent", "141 degrees Fahrenheit (degrees F) (60.6 degrees Celsius (degrees C)) solvent", "200 degrees F (93.3 degrees C) solvent", and "141 degrees F d-limonene blended solvent". They are used for degreasing of machine parts in equipment maintenance.

MIL-PRF-7024E, PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS (1 OCT 1997)

MIL-PRF-7024E, PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS (1 OCT 1997)., This specification covers the requirements for three types of calibrating fluid used in the calibration of aircraft fuel system components.

MIL-PRF-7700GF (USAF), DETAILED SPECIFICATION FLIGHT MANUALS, AIR REFUELING PROCEDURES, AND ABBREVIATED CHECKLISTS (1 MAR 1996) (SUPERSEDING MIL-M-770

MIL-PRF-7700GF (USAF), DETAILED SPECIFICATION FLIGHT MANUALS, AIR REFUELING PROCEDURES, AND ABBREVIATED CHECKLISTS (1 MAR 1996) (SUPERSEDING MIL-M-7700E (USAF)., This specification covers the requirements for the preparation of four (4) types of flight manuals and three (3) types of abbreviated flight manual checklists for all types of aircraft. This specification contains appendices which will allow for the tagging of flight manual information for digital delivery to the government. These will allow the flight manual to be prepared in either a paper or electronic presentation. Appendices A through C provide the Document Type Definitions (DTD) required to prepare the manuals specified herein. Adherence to this specification is essential to assure maximum standardization of the flight manual program; however, requirements that are not applicable to a specific aircraft will not be included. Further, any features applicable to a specific aircraft, but not specified herein, will be included in the manual unless waived by the acquiring activity (see 6.2).

MIL-PRF-7808L, PERFORMANCE SPECIFICATION LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE (2 MAY 1997) [SUPERSEDING MIL-L-7808K]

MIL-PRF-7808L, PERFORMANCE SPECIFICATION LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE (2 MAY 1997) [SUPERSEDING MIL-L-7808K]., This specification covers the requirements for two grades of aircraft turbine engine lubricating oil.

MIL-PRF-8031F (USAF), PERFORMANCE SPECIFICATION LIST OF APPLICABLE PUBLICATIONS (LOAP), PREPARATION OF (29 AUG 1996) (SUPERSEDING MIL-L-8031E(USAF))

MIL-PRF-8031F (USAF), PERFORMANCE SPECIFICATION LIST OF APPLICABLE PUBLICATIONS (LOAP), PREPARATION OF (29 AUG 1996) (SUPERSEDING MIL-L-8031E(USAF))., This performance specification covers the detail requirements for the preparation of the list of publications, referred to throughout this specification as the LOAP. In addition to "paper" delivery, this specification provides for electronic delivery of data through the use of the Document Type Definition (DTD) contained in Appendix A.

MIL-PRF-8184F, PERFORMANCE SPECIFICATION PLASTIC SHEET, ACRYLIC, MODIFIED (5 OCT 1998)

MIL-PRF-8184F, PERFORMANCE SPECIFICATION PLASTIC SHEET, ACRYLIC, MODIFIED (5 OCT 1998)., This specification covers optical quality, transparent, modified acrylic plastic sheet.

MIL-PRF-8516F, MILITARY SPECIFICATION SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED (31 JUL 1997) (SU

MIL-PRF-8516F, MILITARY SPECIFICATION SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED (31 JUL 1997) (SUPERSEDING MIL-S-8516F)., This specification covers a two-component, chemically cured synthetic rubber compound for insulating, sealing, reinforcing, and corrosion protection of electric connectors, wiring, and other electric apparatus. This specification has provisions for shelf-life extension (see 3.2.4).

MIL-PRF-8565K, MILITARY SPECIFICATION, BATTERY STORAGE, AIRCRAFT, GENERAL SPECIFICATION FOR (25 JUN 2001) [SUPERSEDING MIL-B-8865J)

MIL-PRF-8565K, MILITARY SPECIFICATION, BATTERY STORAGE, AIRCRAFT, GENERAL SPECIFICATION FOR (25 JUN 2001) [SUPERSEDING MIL-B-8865J)., This specification covers the general requirements for rechargeable aircraft storage batteries. The batteries are nominal 24-volt batteries that are generally used for medium current engine starting/utility applications, have non-removable covers, and designed for maintenance-free operation (see 6.15.10).

MIL-PRF-9000H, PERFORMANCE SPECIFICATION LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL (16 SEP 1987)

MIL-PRF-9000H, PERFORMANCE SPECIFICATION LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL (16 SEP 1987)., This specification covers one grade of lubricating oil, Military Symbol 9250 (NATO Code 0-278), for use in advanced design high-output shipboard main propulsion and auxiliary diesel engines using fuel conforming to MIL-P-16884.

MIL-PRF-900F (NOTICE 1), PERFORMANCE SPECIFICATION RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS

MIL-PRF-900F (NOTICE 1), PERFORMANCE SPECIFICATION RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS., MIL-PRF-900F/MIL-R-900F, DATED 30 MARCH 1973, HAS BEEN REVIEWED AND DETERMINED TO BE VALID FOR USE IN ACQUISITION.

MIL-PRF-900F, PERFORMANCE SPECIFICATION RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS (30 MAR 1973)

MIL-PRF-900F, PERFORMANCE SPECIFICATION RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS (30 MAR 1973)., This specification covers rubber gasket material for watertight and airtight closures, in the temperature range of -20 Deg. to 130 Deg. F (-28.9 Deg. to 54.4 Deg. C), and other uses.

MIL-PRF-907E, PERFORMANCE SPECIFICATION ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE

MIL-PRF-907E, PERFORMANCE SPECIFICATION ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE. This specification covers antiseize compound for use on threads of steel nuts, studs, bolts and other mating surfaces, including those of superheated steam installations, at temperatures up to 1050 degrees Fahrenheit (°F) (566 degrees Celsius (°C)).

MIL-PRF-907F, PERFORMANCE SPECIFICATION ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE

MIL-PRF-907F, PERFORMANCE SPECIFICATION ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE. This specification covers antiseize compound for use on threads of steel nuts, studs, bolts and other mating surfaces, including those of superheated steam installations, at temperatures up to 1050 degrees Fahrenheit (°F) (566 degrees Celsius (°C)).

MIL-PRF-9854C (AMENDMENT 1), PERFORMANCE SPECIFICATION TECHNICAL MANUALS: STRUCTURAL REPAIR (AIRCRAFT) (11 FEB 2002) [SUPERSEDING MIL-M-9854B]

MIL-PRF-9854C (AMENDMENT 1), PERFORMANCE SPECIFICATION TECHNICAL MANUALS: STRUCTURAL REPAIR (AIRCRAFT) (11 FEB 2002) [SUPERSEDING MIL-M-9854B].

MIL-PRF-9854C, PERFORMANCE SPECIFICATION TECHNICAL MANUALS: STRUCTURAL REPAIR (AIRCRAFT) (29 NOV 1996) [SUPERSEDING MIL-M-9854B]

MIL-PRF-9854C, PERFORMANCE SPECIFICATION TECHNICAL MANUALS: STRUCTURAL REPAIR (AIRCRAFT) (29 NOV 1996) [SUPERSEDING MIL-M-9854B]., This specification covers the requirements for technical manuals containing aircraft structural repair instructions, excluding battle damage repair. In addition to paper" delivery, this specification provides for electronic delivery of data.

MIL-PRF-9977K(USAF)(w/AMENDMENT 1), PERFORMANCE SPECIFICATION MANUALS, TECHNICAL AND CHECKLISTS: MUNITIONS/WEAPONS LOADING PROCEDURES, NONNUCLEAR AND NUCLEAR AND PACKAGES, STANDARD DATA: MUNITIONS LOADING PROCEDURES, NONNUCLEAR (18 DEC 2003)

MIL-PRF-9977K(USAF)(w/AMENDMENT 1), PERFORMANCE SPECIFICATION MANUALS, TECHNICAL AND CHECKLISTS: MUNITIONS/WEAPONS LOADING PROCEDURES, NONNUCLEAR AND NUCLEAR AND PACKAGES, STANDARD DATA: MUNITIONS LOADING PROCEDURES, NONNUCLEAR (18 DEC 2003)., This document establishes the requirements for preparation of manuals and checklists for loading/unloading nuclear weapons and nonnuclear munitions on aircraft, and for checking various armament systems used to control/release/fire munitions and weapons that are approved for loading on an aircraft. In addition to “paper” delivery, this specification provides for electronic delivery of data through the use of the Document Type Definitions (DTD) contained in Appendixes A through J (see 6.2).