MIL-HDBK-2000 (NOTICE 1), SOLDERING OF ELECTRICAL AND ELECTRONIC ASSEMBLIES (NO S/S DOCUMENT. MIL-HDBK-2000, dated 4 July 1990, is hereby canceled without replacement.

MIL-HDBK-2000, SOLDERING OF ELECTRICAL AND ELECTRONIC EQUIPMENT. The scope of this handbook is the range of techniques and practices utilized in the design and manufacture of electrical and electronic assemblies. This includes the physical design of cabling, electronic printed wiring assemblies, the selection of material, and all of the processes utilized to translate the design into functional hardware.

MIL-HDBK-2036, MILITARY HANDBOOK, ELECTRONIC EQUIPMENT SPECIFICATIONS, PREPARATION OF (1 NOV 1999) [SUPERSEDING MIL-STD-2036A]., This document provides guidance for the tailoring of general and detailed requirements which must be addressed in the preparation of specifications for electronic equipment used in ships (including submarines), space, mobile (vehicular), and land applications.

MIL-HDBK-2038, DOD MILITARY HDBK REQUIREMENTS FOR EMPLOYING STANDARD POWER SUPPLIES. NOTE: "MIL-STD-2038 is hereby canceled. However, the technical information and the lessons learned from this standard have been preserved in MIL-HDBK-2038. MIL-HDBK-2038 is to be used for guidance only and should not be cited as a requirement, but information in the handbook may be useful in determining or evaluating requirements." This standard establishes the requirements for the implementation of SPS in the design and construction of military electronic systems.

MIL-HDBK-2051(SH), MILITARY HANDBOOK, FIBER OPTIC SHIPBOARD CABLE TOPOLOGY DESIGN GUIDANCE (22 MAY 1996)., This handbook contains suggested design rules for defining a fiber optic cable topology. In addition, this document describes a suggested approach for developing and designing a fiber optic cable topology (FOCT) for a Naval platform and also identifies the applicable fiber optic component specifications. This handbook is primarily intended for use by the fiber optic cable topology design engineer, but provides useful information to a system design engineer as well.

MIL-HDBK-2053, DEPARTMENT OF DEFENSE MILITARY HANDBOOK REQUIREMENTS FOR EMPLOYING STANDARD BATTERIES. This standard establishes the requirements for the use of standard batteries in the design and construction of military systems. This standard provides the methodology by which a battery type is selected and approved. Appendix A provides a list of organizations in the Department of Defense that can assist with battery standardization and development issues. Appendix B contains a list of general battery specifications. Appendix C contains instructions for the preparation of a battery selection report which will be used to seek approval for use of non-preferred batteries.

MIL-HDBK-2066 (AS), DEPARTMENT OF DEFENSE HANDBOOK CATAPULTING AND ARRESTING GEAR FORCING FUNCTIONS FOR AIRCRAFT STRUCTURAL DESIGN. This document summarizes loads, accelerations, velocities, and other parameters statistically analyzed and extracted from test data representative of the various shipboard and shore based launching and recovery equipment employed by the U.S. Navy. In determining the volume of information to be presented, every effort has been made to condense the data and yet present it, as much as possible, in a form that requires the least amount of additional calculations by the user. The data shown herein may be used to derive time histories of loads and accelerations for the design conditions of MIL-A-8863 "Airplane Strength and Rigidity, Ground Loads for Navy Procured Airplanes” and MIL-A-8866 "Airplane Strength and Rigidity, Reliability Requirements, Repeated Loads9 and Fatigue.” Source:

MIL-HDBK-2066, MILITARY HANDBOOK CATAPULTING AND ARRESTING GEAR FORCING FUNCTIONS FOR AIRCRAFT STRUCTURAL DESIGN. MIL-HDBK-2066, dated 17 March 1999, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-2067 (AS), DEPARTMENT OF DEFENSE HANDBOOK AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR (17 MAR 1999) [SUPERSEDING MIL-STD-2067]., This military handbook specifies uniform criteria for AAES (Aircrew Automated Escape Systems) reliability and maintainability programs.

MIL-HDBK-2067 (NOTICE 1), MILITARY STANDARD, AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR (7 JAN 2004)., MIL-HDBK-2067, dated 17 March 1999, has been reviewed and determined to be valid for use in acquisition

MIL-HDBK-2069, MILITARY HANDBOOK AIRCRAFT SURVIVABILITY (10 APR 1997)., This handbook provides guidance and criteria for establishing survivability requirements and conducting survivability plans and programs throughout the system life cycle for fixed and variable wing aircraft, helicopters and remotely-piloted vehicles. The survivability program will include a mix of threat avoidance, reconstitution and repairability, redundancy, and hardening techniques to enhance system survivability to the maximum practical extents.

MIL-HDBK-2084, DEPARTMENT OF DEFENSE HANDBOOK FOR MAINTAINABILITY OF AVIONICS AND ELECTRONIC SYSTEMS AND EQUIPMENT (31 JUL 1995)., This standard covers the common maintainability design requirements to be used in military specifications for avionic and electronic systems and equipment.

MIL-HDBK-2089, MILITARY HANDBOOK AIRCRAFT SURVIVABILITY TERMS (30 MAY 1997)., This document establishes standardized definitions for aircraft nonnuclear survivability terms so that communication problems that have confronted survivability practitioners as well as workers in allied disciplines, both in government agencies and industry, can be resolved. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-HDBK-2097, MILITARY HANDBOOK, ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT (25 JUL 1997) (SUPERSEDING MIL-STD-2097A)., This standard prescribes the requirements for the identification of common and peculiar support equipment for aerospace weapons systems, subsystems, or major end articles.

MIL-HDBK-2124, MILITARY HANDBOOK FLIGHT DATA RECORDER FUNCTIONAL STANDARDS FOR (10 OCT 2000) (SUPERSEDING MIL-STD-2124)., This standard establishes the functional characteristics of a DOD airborne Flight Data Recorder (FDR) used for flight incident, mishap, or crash analysis, and the parameters required to be recorded. Other uses of the FDR, such as aircraft maintenance, shall be as directed by the acquiring activity.

MIL-HDBK-2141, DEPARTMENT OF DEFENSE MILITARY HANDBOOK DEFINITIONS AND SYSTEMS OF UNITS, MAGNETIC SILENCING (1 JUN 1983) (SUPERSEDING MIL-STD-2141)., This standard contains definition, abbreviations, acronyms, units and symbols used in magnetic silencing. Definitions of abbreviations and terms are limited to statements of meaning as related to this and reference standards, rather than encyclopedia or textbook discussions.

MIL-HDBK-2150(SH), MILITARY HANDBOOK SHIP COMPARTMENT NOMENCLATURE AND SPACE CLASSIFICATION SYSTEM., The purpose of this standard is to establish a uniform system for recording and identifying the space allocated in Navy ships and to provide an alphabetical listing of all approved ship compartment titles. The Space Classification System shall be used for assignment of a space classification number to a space. The space classification number indicates the function performed by the space. The alphabetical listing shall be used to provide title for all new or modified ship compartments NOTE: MIL-STD-2150A(SH) has been redesignated as a handbook, and is to be used for guidance only. This document is no longer to be cited as a requirement. For administrative expediency, the only physical change from MIL-STD-2150A(SH) is this cover page. If cited as a requirement, contractors may disregard the requirements of this document and interpret its contents only as guidance.

MIL-HDBK-2150A (SH), DEPARTMENT OF DEFENSE HANDBOOK SHIP COMPARTMENT NOMENCLATURE AND SPACE CLASSIFICATION SYSTEM (24 APR 2008)., The purpose of this handbook is to establish a uniform system for recording and identifying the space allocated in Navy ships and to provide an alphabetical listing of all approved ship compartment titles. The Space Classification System should be used for assignment of a space classification number to a space. The space classification number indicates the function performed by the space. The alphabetical listing should be used to provide titles for all new or modified ship compartments. This handbook is for guidance only and cannot be cited as a requirement.

MIL-HDBK-2155, MILITARY HANDBOOK FAILURE REPORTING, ANALYSIS AND CORRECTIVE ACTION TAKEN (11 DEC 1995). This standard establishes uniform requirements and criteria for a Failure Reporting, Analysis, and Corrective Action System (FRACAS) to implement the FRACAS requirement of MIL-STD-785. FRACAS is intended to provide management visibility and control for reliability and maintainability improvement of hardware and associated software by timely and disciplined utilization of failure and maintenance data to generate and implement effective corrective actions to prevent failure recurrence and to simplify or reduce the maintenance tasks.

This handbook provides guidelines for Environmental Stress Screening (ESS) of electronic equipment, including environmental screening conditions, durations of exposure, procedures, equipment operation, actions taken upon detection of defects, and screening documentation.

MIL-HDBK-2165, MILITARY HDBK TESTABILITY PROGRAM FOR SYSTEMS AND EQUIPMENTS. This standard prescribes a uniform approach to testability program planning, establishment of diagnostic concepts and testability (including BIT) requirements, testability and test design and assessment, and requirements for conducting testability program review

MIL-HDBK-2173 (AS) (NOTICE 1), DOD HANDBOOK RELIABILITY-CENTERED MAINTENANCE REQUIREMENTS FOR NAVAL AIRCRAFT, WEAPONS SYSTEMS AND SUPPORT EQUIPMENT. MIL-HDBK-2173(AS), dated 30 January 1998, is hereby canceled. Future acquisitions should refer to the Naval Aviation RCM Process, Guide Manual, NAVAIR 00-25-403.

MIL-HDBK-2173 (AS), RELIABILITY-CENTERED MAINTENANCE REQUIREMENTS FOR NAVAL AIRCRAFT, WEAPONS SYSTEMS AND SUPPORT EQUIPMENT (REFER TO NAVAL AVIATION RCM PROCESS, GUIDE MANUAL, NAVAIR 00-25-403). The purpose of this standard is to provide the procedures for a Reliablity-Centered Maintenance (RCM) for Naval Aircraft, weapons systems, and support equipment.

MIL-HDBK-2189 (SH) SECTION 243-1, DOD MILITARY HANDBOOK DESIGN METHODS FOR NAVAL SHIPBOARD SYSTEMS SECTION 243-1 PART 1 PROPULSION SHAFTING. This document applies to the propulsion shafting design of all naval ships, surface and submarine, single- or multiple-shaft. NOTE: MIL-STD-2189-243-1 has been redesignated as a handbook, and is to be used for guidance only. This document is no longer to be cited as a requirement. For administrative expediency, the only physical change from MIL-STD-2189-243-1 is this cover page. If cited as a requirement, contractors may disregard the requirements of this document and interpret its contents only as guidance.

MIL-HDBK-2189 (SH) SECTION 672-1, DOD MILITARY HANDBOOK DESIGN METHODS FOR NAVAL SHIPBOARD SYSTEMS SECTION 672-1 CALCULATION OF STOREROOM CAPACITIES. This standard establishes the method of calculating storeroom data and provides the format for documenting the storeroom capacity table. NOTE: MIL-STD-2189-672-1 has been redesignated as a handbook, and is to be used for guidance only. This document is no longer to be cited as a requirement. For administrative expediency, the only physical change from MIL-STD-2189-672-1 is this cover page. If cited as a requirement, contractors may disregard the requirements of this document and interpret its contents only as guidance.

MIL-HDBK-2189 (SH), MILITARY HANDBOOK DESIGN METHODS FOR NAVAL SHIPBOARD SYSTEMS. The purpose of this standard and the supporting sections is to provide textbook-type information and guidance for use in the design and construction of ships. The supporting sections illustrate typical design and calculation methods and procedures which are acceptable to the Government.

MIL-HDBK-2193 (SH), DEPARTMENT OF DEFENSE MILITARY HANDBOOK HYDRAULIC SYSTEM COMPONENTS, SHIP., This standard provides general requirements that are common to most components used in ship hydraulic (power transmission and control) systems. This standard does not establish configuration requirements, pressure, flow, or performance requirements for any specific component.. MIL-STD-2193(SH) has been redesignated as a handbook, and is to be used for guidance only. This document is no longer to be cited as a requirement. For administrative expediency, the only physical change from MIL-STD-2193(SH) is this cover page. If cited as a requirement, contractors may disregard the requirements of this document and interpret its contents only as guidance.

MIL-HDBK-2361B (AC) - ARMY DIGITAL PUBLICATIONS DEVELOPMENT IMPLEMENTATION GUIDE. This handbook provides guidance on the implementation of Standard Generalized Markup Language (SGML) and Extensible Markup Language (XML) as it pertains to MIL-STD-2361, Department of Defense, Interface Standard, Army Digital Publications. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-STD-2182, DEPARTMENT OF DEFENSE STANDARD ENGINEERING CHROMIUM PLATING (ELECTRODEPOSITED) FOR REPAIR OF CHROMIUM PLATING (29 JAN 1985) [SUPERSEDING NAVSEA 0919-LP-000-9010]., This Military Standard establishes uniform standards for repair and refurbishment of shafting not subject to sea water service.