MIL-HDBK-1811, DEPARTMENT OF DEFENSE HANDBOOK MASS PROPERTIES CONTROL FOR SPACE VEHICLES (12 AUG 1998) [SUPERSEDING MIL-STD-1811]., This handbook provides guidance for establishing uniform procedures for the control, determination, and documentation of mass properties of space vehicles and their subsystems and components.

MIL-HDBK-1812, DEPARTMENT OF DEFENSE HANDBOOK TYPE DESIGNATION, ASSIGNMENT AND METHOD FOR OBTAINING (14 FEB 1997)., The purpose of this standard is to provide type designation systems and procedures for use by the Department of Defense to standardize the identification of Photographic Equipment, Aerospace Vehicle Propulsion Engines, Aeronautical Equipment, Support Equipment, and Electronic Materiel. In addition, this standard defines the method for obtaining nomenclatures and type designations.

MIL-HDBK-1814, DOD HANDBOOK INTEGRATED DIAGNOSTICS (14 FEB 1997) (SUPERSEDING MIL-STD-1814)., This standard contains generic requirements and verifications for properly incorporating Integrated Diagnostics (ID) into acquisition program events, such as creating documents and plans, accomplishing studies and tradeoffs, and conducting reviews and audits.

MIL-HDBK-1823 (NOTICE 1), DEPARTMENT OF DEFENSE HANDBOOK NONDESTRUCTIVE EVALUATION SYSTEM, RELIABILITY ASSESSMENT (14 APR 2004)., MIL-HDBK-1823, dated 30 April 1999, has been reviewed and determined to be valid for use in acquisition

MIL-HDBK-1823, DOD HANDBOOK NONDESTRUCTIVE EVALUATION SYSTEM, RELIABILITY ASSESSMENT (30 APR 1999)., This handbook applies to all agencies with the DoD and industry involving methods for testing and evaluation procedures for assessing Non-Destructive Evaluation (NDE) system capability. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-HDBK-1839A, DEPARTMENT OF DEFENSE HANDBOOK CALIBRATION AND MEASUREMENT REQUIREMENTS (27 NOV 2000)., The information and interpretive guidance provided by this handbook are intended to clarify the requirements invoked by MIL-STD-1839. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. This handbook is an informational guide intended to provide design activities (government representatives and contractor personnel) with an expanded understanding of MIL-STD- 1839 requirements, and to assist in providing for the uniform evaluation of the contractor’s compliance to the individual requirements as they apply to the contract. Accordingly, this handbook quotes (“ ”) the requirements from the respective sections of MIL-STD-1839, for easy reference, followed by interpretive guidance for the requirements of the standard. This handbook cannot modify or add to any of the MIL-STD-1839 requirements.

MIL-HDBK-1857, GROUNDING, BONDING AND SHIELDING DESIGN PRACTICES (27 MAR 1998) [SUPERSEDING MIL-STD-1857]., This standard covers the characteristics of grounding, bonding, and shielding design practices to be applied in the construction and installation of marine, fixed station, transportable, and ground mobile equipment, subsystem, and system.

MIL-HDBK-1861, DEPARTMENT OF DEFENSE HANDBOOK SELECTION AND USE OF ELECTRICAL AND ELECTRONIC ASSEMBLIES, BOARDS, CARDS, AND ASSOCIATED HARDWARE (30 OCT 1998)., This handbook provides a list of electrical and electronic assemblies, boards, cards, and associated hardware for use in the design of DoD equipment. The application information and performance characteristics contained in this handbook are offered for guidance and are not to be considered as binding. Additions to this handbook will be made periodically as the referenced documents are updated.

MIL-HDBK-1861A (w/ CHANGE 1), DOD HANDBOOK SELECTION AND USE OF ELECTRICAL AND ELECTRONIC ASSEMBLIES, BOARDS, CARDS, AND ASSOCIATED HARDWARE (26 SEP 20060., This handbook is for guidance only and cannot be cited as a requirement. If it is, the contractor does not have to comply. This handbook consists of the following: a. Selected standard items, for use in the design and manufacturer of Department of Defense equipment under the jurisdiction of the Department of Defense. b. Guides for the choice and application of items for use in Department of Defense equipment.

MIL-HDBK-1884 (AT), DEPARTMENT OF DEFENSE HANDBOOK COATING, PLASMA SPRAY DEPOSITION (14 MAR 1998) [SUPERSEDING MIL-STD-1884A]., NOTE: MIL-STD-1884A(AT) has been redesignated as a handbook, and is to be used for guidance purposes only. This document is no longer to be cited as a requirement. For administrative expediency, the only physical change from MIL-STD-1884A(AT) is this cover page. However, this document is no longer to be cited as a requirement. If cited as a requirement, contractors may disregard the requirements of this document and interpret its contents only as guidance. The procedures covered by this standard are intended to ensure that plasma spray coating operations, either manual or automated, meet prescribed requirements. This process can be used on parts requiring protection from wear, heat, corrosion (with sealer), abrasion and to restore dimensionally discrepant parts. This standard covers the requirements for thermal coating by means of plasma spray deposition.

MIL-HDBK-1886(AT), DEPARTMENT OF DEFENSE HANDBOOK TUNGSTEN CARBIDE-COBALT COATING, DETONATION PROCESS FOR (27 MAR 1998) [SUPERSEDING MIL-STD-1886]., NOTE: MIL-STD-1886 has been redesignated as a handbook, and is to be used for guidance purposes only. This document is no longer to be cited as a requirement. This standard covers the procedure for applying tungsten carbide-cobalt coatings to metal parts by the detonation process and the acceptance criteria for the finished parts. This detonation process for applying tungsten carbide-cobalt coating provides a hard, wear-resistant surface on metal parts which do not operate at temperatures higher than 1,000 degrees Fahrenheit (°F) [538 degrees Celsius (538°C)]. The coating is not recommended for surfaces with deep v-shaped grooves, blind cavities, narrow holes, sharp corners, or where deformation of the base metal is expected.

MIL-HDBK-1890 (AT) (NOTICE 1), DEPARTMENT OF DEFENSE HANDBOOK, INSPECTION OF WELDED JOINTS (15 APR 2004) [SUPERSEDING MIL-STD-1890A(AT)]., MIL-HDBK-1890, dated 10 May 1996, has been reviewed and determined to be valid for use in acquisition

MIL-HDBK-1890 (AT), DEPARTMENT OF DEFENSE HANDBOOK, INSPECTION OF WELDED JOINTS (10 MAY 1996) [SUPERSEDING MIL-STD-1890A(AT)]., This handbook gives guidance for nondestructive inspection of welded joints. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-HDBK-1897 (NOTICE 1), DEPARTMENT OF DEFENSE HANDBOOK TOLERANCES FOR INVESTMENT CASTINGS (15 APR 2004)., MIL-HDBK-1897, dated 17 May 1996, has been reviewed and determined to be valid for use in acquisitions.

MIL-HDBK-1897, DEPARTMENT OF DEFENSE HANDBOOK TOLERANCES FOR INVESTMENT CASTINGS (17 MAY 1996)., This handbook covers general tolerances applicable to ferrous and nonferrous as-cast investment castings. The purpose of this handbook is to provide design engineers with the tolerance capabilities of investment casting sources.

MIL-HDBK-1908B, DEPARTMENT OF DEFENSE HANDBOOK DEFINITIONS OF HUMAN FACTORS TERMS (16 AUG 1999)., This handbook defines terms frequently used in human factors standardization documents by providing common meanings of such terms to ensure that they will be interpreted consistently and in the manner intended.

MIL-HDBK-1916, DOD HANDBOOK COMPANION DOCUMENT TO MIL-STD-1916 (10 FEB 1999)., The purpose of this handbook is to: a. Provide guidance on using MIL-STD-1916 to improve industrial practices through statistical process control and other continuous improvement techniques. b. Furnish an understanding of how the sampling inspection plans work and how they can be replaced by alternate acceptance methods.

MIL-HDBK-1941, MILITARY HANDBOOK METAL-ARC WELDING OF HOMOGENEOUS ARMOR (16 SEP 1998)., This handbook covers the requirements for the fabrication of weldments by metal-arc welding processes, which weldments are constructed of homogeneous rolled and cast armor and the steel attachments to this armor. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply