MIL-HDBK-700A, The intent of this handbook is to provide fundamental guidelines for engineers and designers concerned with Plastics applications.

MIL-HDBK-701C, MILITARY HANDBOOK BLOCKING, BRACING AND SKIDDING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE. This handbook covers approved methods of blocking, bracing, skidding, and associated procedures used for the protection of industrial plant equipment (IPE) for shipment and handling.

MIL-HDBK-702 (NOTICE 1), MILITARY STANDARDIZATION HANDBOOK ENGINEERING PRACTICES PRODUCTIVITY ENHANCEMENT. MIL-HDBK-702, dated 1 AUGUST 1985, has been reviewed and determined to be vaild for use.

MIL-HDBK-702, MILITARY STANDARDIZATION HANDBOOK ENGINEERING PRACTICES PRODUCTIVITY ENHANCEMENT OF INDUSTRIAL PLANT EQUIPMENT AND PRODUCTION SUPPORT SYSTEMS. The industrial base activities within the DoD are challenged to improve the productivity of manufacturing in support of DoD maintenance of research and develpment.

MIL-HDBK-704-1, DEPARTMENT OF DEFENSE HANDBOOK GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS (PART 1 OF 8 PARTS) (9 APR 2004)., This handbook provides guidance on test procedures for demonstration of utilization equipment to determine compliance with the aircraft electrical power characteristics of MIL-STD-704.

MIL-HDBK-705C (NOTICE 1), MILITARY HANDBOOK GENERATOR SETS, ELECTRICAL, MEASUREMENT AND INSTRUMENTAL METHODS. MIL-HDBK-705, dated 29 May 1987, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-705C, MILITARY HANDBOOK GENERATOR SETS, ELECTRICAL, MEASUREMENT AND INSTRUMENTAL METHODS. This handbook covers two series of methods for measuring and determining characteristics of all electric generators and generator sets as classified by MIL-STD-1332, and associated equipment.

MIL-HDBK-722, MILITARY HANDBOOK, GLASS (1 AUG 1969)., MIL-HDBK-722(MR) contains technical information and data pertaining to products formed from glas

MIL-HDBK-723A, MILITARY HANDBOOK STEEL AND IRON WROUGHT PRODUCTS. MIL-HDBK-723A contains technical information and data pertaining to the wrought products of three ferrous materials; wrought iron, carbon steels, and low alloys steels.

MIL-HDBK-725 (NOTICE 1), MILITARY HANDBOOK ADHESIVES A GUIDE TO THEIR PROPERTIES AND USES AS DESCRIBED BY FEDERAL AND MILITARY SPECIFICATIONS. MIL-HDBK-725, dated 1 May 1972, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-725, MILITARY HANDBOOK ADHESIVES A GUIDE TO THEIR PROPERTIES AND USES AS DESCRIBED BY FEDERAL AND MILITARY SPECIFICATIONS. This handbook covers the salient properties and intended uses of all current Federal and Military specifications on adhesives.

MIL-HDBK-726, MILITARY HANDBOOK, ULTRASONIC TESTING [S/S BY MIL-HDBK-728]., Military Handbook, MIL-HDBK-726, dated 10 Jun 74, is hereby cancelled and superseded by MIL-HDBK-728 dated 16 December 1985.

MIL-HDBK-727 (NOTICE 1), MILITARY HANDBOOK DESIGN GUIDANCE FOR PRODUCIBILITY. MIL-HDBK-727, dated 5 April 1984, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-727, MILITARY HANDBOOK DESIGN GUIDANCE FOR PRODUCIBILITY. This document provides the design engineer with information to assist him in reducing or eliminating design features that would make producibility difficult to achieve.

MIL-HDBK-728/1 (NOTICE 1), MILITARY HANDBOOK NONDESTRUCTIVE TESTING. MIL-HDBK-728/1, dated 16 December 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-728/1, MILITARY HANDBOOK NONDESTRUCTIVE TESTING. Although this handbook is provided as a guide to all those employed in nondestructive testing (NDT), it will be of specific interest to administrators, designers, production engineers, quality assurance personnel, and nondestructive test engineers and technicians.

MIL-HDBK-728/2 (NOTICE 1), MILITARY HANDBOOK EDDY CURRENT TESTING. MIL-HDBK-728/2, dated 16 December 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-728/2, MILITARY HANDBOOK EDDY CURRENT TESTING. Provides the fundamental principles and guides associated with eddy current testing.

MIL-HDBK-728/3 (NOTICE 1), MILITARY HANDBOOK LIQUID PENETRANT TESTING. MIL-HDBK-728_3, dated 16 December 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-728/3, MILITARY HANDBOOK LIQUID PENETRANT TESTING. Presents the fundamental principles and guidelines associated with liquid penetrant testing.

MIL-HDBK-728/4A, MILITARY HANDBOOK MAGNETIC PARTICLE TESTING. This document is intended to provide information on the use of magnetic particle testing and inspection both broad and specific applications.

MIL-HDBK-728/5A., MILITARY HANDBOOK MIL-HDBK-728/5A RADIOLOGIC TESTING. Radiologic examination provides a nondestructive method of inspecting the internal continuity of a specimen.

MIL-HDBK-728/6, MILITARY HANDBOOK ULTRASONIC TESTING. Ultrasonic testing employs high-frequency mechanical waves to detect various material variables.

MIL-HDBK-729 (Notice 1)., MILITARY HANDBOOK CORROSION AND CORROSION PREVENTION METALS. MIL-HDBK-729, dated 21 November 1983 has been reviewed and determined to be valid for usie in acquisition.

MIL-HDBK-729, MILITARY STANDARDIZATION HANDBOOK, CORROSION AND CORROSION PREVENTION METALS (21 NOV 1983). This handbook provides basic and fundemental information on corrosion and corrosion prevention of metals for the guidance of engineers and designers of military material,

MIL-HDBK-730 (NOTICE 1), MILITARY HANDBOOK MATERIALS JOINING. MIL-HDBK-730, dated 31 January 1986, has been reviewed and determined to be vaild for use in acquisition.

MIL-HDBK-730.pdf MILITARY STANDARDIZATION HANDBOOK ON MATERIALS JOINING. The purpose of this handbook is to provide Department of Defense engineering and quality assurance personnel with the basic principles and general knwoledge of materials joining processes.

MIL-HDBK-731 (NOTICE 1), MILITARY HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - THERMOGRAPHY. MIL-HDBK-731, dated 1 August 1984, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-731, MILITARY STANDARDIZATION HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - THERMOGRAPHY. This is the first volume of a nine volume series on nondestructive testing of composite materials.

MIL-HDBK-732A, MILITARY HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS ACOUSTIC EMISSION.Technical priniciples will be discussed which must be followed in order to insure that a technically sound Acoustic Emission (AE) test is performed on a composite sample.

MIL-HDBK-733, MILITARY HANDBOOK, NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - RADIOGRAPHY (27 JUN 1986)., This document is intended to provide information on radiographic techniques for examining discontinuities found in many type of reinforced composites.

MIL-HDBK-735 (MR), MILITARY HDBK MATERIAL DETERIORATION PREVENTION AND CONTROL GUIDE FOR ARMY MATERIEL, PART ONE, METALS. The purpose of this handbook is to provide information needed to avoid or control corrosion of metals used in Army materiel. To the extent that this information is applied, the objectives of reducing costs and improving readiness are achieved.

MIL-HDBK-737A., MILITARY HANDBOOK HANDBOOK FOR TEXTILE LABORATORY PERSONNEL. The major purpose of this handbook is to provide guidance to laboratory personnel in carrying out some of the basic test in FED-STD-191 used in the acceptance of textiles procured by the Government.

MIL-HDBK-738, MILITARY HANDBOOK, CLEANING OF OFFICE MACHINES (29 AUG 1967)., The intent of this handbook is to provide fundamental guidelines for the cleaning of office machines.

MIL-HDBK-739 (NOTICE 1), MILITARY HANDBOOK FIELD REFRIGERATION EQUIPMENT. Military satandardization Handbook MIL-HDBK-739 dated 18 June 1970 has been reviewed and determined to be current.

MIL-HDBK-739, MILITARY STANDARDIZATION HANDBOOK FIELD REFRIGERATION EQUIPMENT. This handbook provides information and guidance to personnel preparing technical manuals, technical bulletins and other documents for field use. The handbook is not intended to be referenced in purchase specifications, nor shall it supersede any specification requirements

MIL-HDBK-740 (NOTICE) 1, MILITARY HANDBOOK DISWASHING OPERATIONS. MIL-HDBK-740, dated 28 December 1972, is hereby canceled without replacement.

MIL-HDBK-740, MILTIARY STANDARDIZATION HANDBOOK DISHWASHING OPERATIONS. This handbook contains information concerning the equipment, supplies, and procedures for the cleaning of tableware in single-tank and multiple-tank dishwashing machines, hand washing in kitchens and hand washing in the field.

MIL-HDBK-741 (NOTICE 1), MILITARY HANDBOOK FABRIC DESIGN. Miitary handbook MIL-HDBK-741(GL) dated 23 July 1974 has been reviewed and determined to be current.

MIL-HDBK-741, MILITARY STANDARDIZATION HANDBOOK FABRIC DESIGN. The tables in this handbook are presented to facilitate the designing of high-texture or maximum-weavable fabrics.

MIL-HDBK-742, MILITARY HANDBOOK, WASTE DISPOSAL METHODS FOR MILITARY PACKAGING MATERIALS (29 SEP 1976)., This handbook was developed to determine the best methods to be used for individual military packaging materials generated at land-based military installations.

MIL-HDBK-753, MILITARY STANDARDIZATION HANDBOOK CB COLLECTIVE PROTECTION OF MOBILE VEHICLES, VANS AND SHELTERS. This handbook summarizes the state of the art for positive pressure CB collective protection shelters and contains information useful for the planning, design, testing, and evaluation of collective protection equipment.

MIL-HDBK-754, MILITARY HANDBOOK PLASTIC MATRIX COMPOSITES WITH CONTINUOUS FIBER REINFORCEMENT. The plastic matrix composites discussed in this handbook contain continous fibers, in either a nonwoven or woven form, embedded in a common plastic matrix.

MIL-HDBK-755 (AR), MILITARY HANDBOOK, PLASTIC MATERIAL PROPERTIES FOR ENGINEERING DESIGN (16 SEP 1991)., An overview of plastic materials, including their classification and insight into their polymer structure, and a review of material properties and American Society for Testing and Materials (ASTM) standards for testing are presented. A brief discussion of environmental factors and their influence on properties is included.

MIL-HDBK-756, MILITARY HANDBOOK MANUFACTURE OF PROJECTILES, PROJECTILE COMPONENTS, AND CARTRIDGE CASES FOR ARTILLERY, TANK MAIN ARMAMENT, AND MORTARS (29 APR 1992)., This expanded revision of AMCP 706-249 covers aspects relating to production of munitions that the design engineer must consider early in the development stage of the life cycle.

MIL-HDBK-757, MILITARY HANDBOOK FUZES (15 APR 1994)., The word fuze is used to describe a wide variety of devices used with munitions to provide basically the functions of (1) safety, i.e., keeping the munitions safe for storing, handling (including accidental mishandling), transportation, and launching or emplacing,(2) arming, i.e.sensing the environment(s) associated with actual use including safe separation and, thereupon, aligning explosive trains, closing switches and/or establishing other links or logic to prepare the munition for functioning, and (3) firing, i.e., sensing the point in space or time at which initiation is to occur and effecting such initiation.

MIL-HDBK-759B (NOTICE 1), MILITARY HANDBOOK HUMAN FACTORS ENGINEERING DESIGN FOR ARMY MATERIEL. The following pages of the MIL-HDBK-759B have been revised and supersede the pages listed

MIL-HDBK-759B (NOTICE 2), MILITARY HANDBOOK HUMAN FACTORS ENGINEERING DESIGN FOR ARMY MATERIEL. The following pages of MIL-HDBK-759B have been revised and supersede the pages listed.

MIL-HDBK-759B, MILITARY HANDBOOK HUMAN FACTORS ENGINEERING DESIGN FOR ARMY MATERIEL METRIC. This handbook provides human factors engineering guidelines, preferred practices, and reference data for design of Army materiel.

MIL-HDBK-759C (NOTICE 1), DEPARTMENT OF DEFENSE HANDBOOK HUMAN ENGINEERING DESIGN GUIDELINES. The following pages of MIL-HDBK-759C have been revised and supersede the pages listed.

MIL-HDBK-759C (NOTICE 2), DEPARTMENT OF DEFENSE HANDBOOK HUMAN ENGINEERING DESIGN GUIDELINES.The following pages of MIL-HDBK-759C have been revised and supersede the pages listed.

MIL-HDBK-759C. This document provides basic guidelines and data on human engineering design for military systems, equipment, and facilities. This handbook has been designed to supplement MIL-STD-1472D.

MIL-HDBK-761A (NOTICE 1), DEPARTMENT OF DEFENSE HANDBOOK HUMAN ENGINEERING GUIDELINES FOR MANAGEMENT INFORMATION SYSTEMS. MIL-HDBK-761A, dated 30 September 1989, is hereby cancelled without replacement.

The purpose of this document is to,provide human factors engineering design guidance for the analysis, design, and evaluation of computer based Management Information Systems. Guidance is presented in the form of 1) analysis and design techniques which should be applied to the development and evaluation of User-Computer Interface (UCI) design concepts, and 2), design guidelines which should be used during UCI requirements analysis, design, development, test and integration.

MIL-HDBK-762 (NOTICE 1), MILITARY HANDBOOK DESIGN OF AERODYNAMICALLY STABILIZED FREE ROCKETS (24 OCT 2000)., MIL-HDBK-762, dated 17 July 1990, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-762 (NOTICE 2), MILITARY HANDBOOK DESIGN OF AERODYNAMICALLY STABILIZED FREE ROCKETS (8 MAR 2006)., Design of Aerodynamically Stabilized Free Rockets MIL-HDBK-762, dated 24 October 2000, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-762, MILITARY HANDBOOK DESIGN OF AERODYNAMICALLY STABILIZED FREE ROCKETS (17 JUL 1990)., Aerodynamically stabilized free rockets offer relatively simple, reliable, small, low-cost means for delivering payloads and, when great accuracy is not required, are often the optimum systems. This handbook provides engineering design information and data for such rockets. Primarily, this handbook is intended to cover the conceptual and preliminary design phases; however, reference is made to technical approaches and computer programs required for the system development phase. The material includes operational and interface requirements as they influence the design of the total weapon system.

MIL-HDBK-764, SYSTEM SAFETY ENGINEERING DESIGN GUIDE FOR ARMY MATERIEL (12 JAN 1990). This chapter, which provides an initial overview of system safety within the US Army, begins by contrasting the obsolete principles that have guided the safety policies of the Army in the past with up-to-date principles that guide the policies of today.

MIL-HDBK-765 (NOTICE 1), MILITARY HANDBOOK GUIDELINES FOR SAFE DESIGN OF POLYPHASE ELECTRICAL SYSTEMS. The following pages of MIL-HDBK-765(MD) have been revised and supersede the pages listed.

MIL-HDBK-765 (NOTICE 2), MILITARY HANDBOOK GUIDELINES FOR SAFE DESIGN OF POLYPHASE ELECTRICAL SYSTEMS. MIL-HDBK-765 (MI)is inactive for new design and is no longer used, except for replacement purposes.

MIL-HDBK-765, MILITARY HANDBOOK GUIDELINES FOR SAFE DESIGN OF POLYPHASE ELECTRICAL SYSTEMS. Covered in this handbook are polyphase electrical systems used by the US Army that either may be powered continuously by an engine-driven-generator set or powered by a backup engine-driven-generator set, which supplies power when the primary supply is disabled.

MIL-HDBK-766 (NOTICE 1), MILITARY HANDBOOK DESIGN TO COST. MIL-HDBK-766, dated 25 August 1989, is hereby canceled without replacement.

MIL-HDBK-766, MILITARY HANDBOOK DESIGN TO COST (25 AUG 1989)., This handbook provides information and guidance for appliation of the DTC policies contained in Department of Defense Directive (DODD) 4245.3, "Design to Cost."

MIL-HDBK-767, MILITARY HANDBOOK DESIGN GUIDANCE FOR INTERIOR NOISE REDUCTION IN LIGHT-ARMORED TRACKED VEHICLES (17 SEP 1993). Techniques available to reduce interior noise in light-armored tracked vehicles are discussed.

MIL-HDBK-770A (NOTICE 1), MILITARY HANDBOOK SHRINK FILM/STRETCH FILM IN MILITARY PACKAGING. MIL-HDBK-770A, dated 13 September 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-770A, MILITARY STANDARDIZATION HDBK SHRINK FILM/STRECH FILM IN MILITARY PACKAGING. This standardization handbook was developed for use by DOD activities having applications for shrink film and/or stretch film in packaging for shipment or storage. This publication was approved on 13 September 1985 for printing and inclusion in the military standardization handbook series. This two-part document provides basic and fundamental information on the use of shrink-film/stretch-film packaging applications and equipment. It provides basic information to personnel engaged in developing packaging directives as well as to personnel involved in actual packaging of materiel for storage and distribution. This handbook is not intended to be referenced in purchase specifications except for informational purposes, nor shall it supersede any specification requirements.

MIL-HDBK-772, MILITARY STANDARDIZATION HANDBOOK, MILITARY PACKAGING ENGINEERING (30 MAR 1981)., This document provides basic and fundamental packaging engineering principles and practices for the packaging of military supplies and equipment.

MIL-HDBK-773 (NOTICE 1), MILITARY HANDBOOK ELECTROSTATIC DISCHARGE. The following pages of MIL-HDBK-773 have been revised and supersede the pages listed.

MIL-HDBK-773, MILITARY HANDBOOK ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING. This handbook provides detailed guidance for DOD personnel who use, handle, package, or store ESDS items.

MIL-HDBK-773A, DEPARTMENT OF DEFENSE HANDBOOK ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING (30 JUN 2005)., This handbook provides detailed guidance for DoD personnel who use, handle, package, or store Electrostatic Discharge Sensitive (ESDS) items. It is designed to promote the use of standardized packaging materials as well as promote an understanding of the Electrostatic Discharge (ESD) threat through all levels of maintenance and supply. This handbook is for guidance only and cannot be cited as a requirement.

MIL-HDBK-774, DEPARTMENT OF DEFENSE HANDBOOK PALLETIZED UNIT LOADS (25 MAR 1996) [SUPERSEDING MIL-STD-147D]., This standard establishes the methods, materials, and techniques to be employed in the formation of bonded palletized unit loads of military supplies which are adaptable to unit loading.

MIL-HDBK-774A, DEPARTMENT OF DEFENSE HANDBOOK PALLETIZED UNIT LOADS (30 AUG 2004). This handbook establishes the methods, materials, and techniques to be employed in the formation of bonded palletized unit loads of military supplies, which are adaptable to unit loading. The methods prescribed herein are to be utilized with standard, general purpose, 40- by 48-inch pallets conforming to the various classes, types, and styles in ASME MH 1, Part 9. However, the various methods of bonding and types of storage aids may be modified for use with other size pallets. This handbook will not be used for the palletization of ammunition, explosives, or semi-perishable subsistence unless specifically prescribed by the cognizant technical activity. (Ammunition unit loads should be in accordance with MIL-STD-1660, while semi-perishable subsistence unit loads will be in accordance with DSCP Form 3507.) This handbook is for guidance only and cannot be cited as a requirement.

MIL-HDBK-775, HANDBOOK FOAM-IN-PLACE PACKAGING, PROCEDURES FOR (19 APR 1996). This standard provides the requirements and procedures (techniques) for packaging aupplies using foam-in-place (FIP) materials.

MIL-HDBK-776 (NOTICE 1), MILITARY HANDBOOK SHAFTS, ELASTIC TORSIONAL STRESS ANALYSIS OF. MIL-HDBK-776, dated 15 September 1981, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-776 NOT 2, MILITARY HANDBOOK SHAFTS, ELASTICS TORSIONAL STRESS ANALYSIS OF. MIL-HDBK-776, dated 15 September 1981, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-776, MILITARY HANDBOOK SHAFTS, ELASTIC TORSIONAL STRESS ANALYSIS OF DEPARTMENT OF DEFENSE. Design charts and tables have been developed for the elastic torisional stress analyses of free prismatic shafts, splines and spring bars with virtually all common industrially encountered thick cross sections.

MIL-HDBK-780B, MILITARY HANDBOOK STANDARDIZED MILITARY DRAWINGS. This handbook provides guidance and infromation concerning standardized military drawings (SMD's)>

MIL-HDBK-780C, DEPARTMENT OF DEFENSE HANDBOOK STANDARD MICROCIRCUIT DRAWINGS. This handbook provides guidance and information concerning standard microcircuit drawings (SMD's).

MIL-HDBK-780D, DEPARTMENT OF DEFENSE HANDBOOK STANDARD MICROCIRCUIT DRAWINGS (28 MAY 2004). This handbook provides guidance and information concerning standard microcircuit drawings (SMD's).

MIL-HDBK-781, RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION, AND PRODUCTION. This handbook provides test methods, test plans, and test environment profiles which can be used in reliability testing during the development, qualification and production of systems and equipment.

MIL-HDBK-781A, HANDBOOK FOR RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING, DEVELOPMENT QUALIFICATION, AND PRODUCTION. This handbook provides test methods, test plans, and test environmental profiles which can be used in reliability testing during the development, qualification, and production of systems and equipment.

MIL-HDBK-781A, RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION, AND PRODUCTION. This handbook provides test methods, test plans, and test environmental profiles which can be used in reliability testing during the development, qualification, and production of systems and equipment.

MIL-HDBK-782 NOT 1, MILITARY STANDARD SOFTWARE SUPPORT ENVIRONMENT ACQUISITION. MIL-HDBK-782(AR), dated 29 February 1988, is hereby canceled. See MIL-HDBK-1467.

MIL-HDBK-782, MILITARY HANDBOOK SOFTWARE SUPPORT ENVIRONMENT ACQUISTION. MIL-HDBK-782(AR) provides a common interpretation of the requirement and uses DOD-STD-1467 and the information needed to use it effectively.

MIL-HDBK-783, MILITARY HANDBOOK CHEMICAL AND BIOLOGICAL (CB) CONTAMINATION AVOIDANCE AND DECONTAMINATION. This handbook is primarily for project managers, design engineers, and scientist who need an overview of potential threat agents, available decontamination and contamination avoidance countermeasures, and design systems that can operate effectively in a CB-agent-contaminated environment.

MIL-HDBK-784, MILITARY HANDBOOK GUIDELINES-DESIGN TO MINIMIZE CONTAMINATION AND TO FACILITATE DECONTAMINATION OF MILITARY VEHICLES AND OTHER EQUIPMENT: INTERIROS AND EXTERIORS. This handbook provides guidelines for designing military equipment so as to minimze contamination by nuclear, biological, and chemical (NBC) agents and to increase the effectiveness of decontamination processes.

MIL-HDBK-785 (AR), DESIGN OF TOWED ARTILLERY SYSTEMS

MIL-HDBK-786 NOT 1, MILITARY HANDBOOK FIELD ASSURANCE OF ACOUSTIC EMISSION SYSTEM OPERATION USING SIMULATED ACOUSTIC EMISSION EVENTS. MIL-HDBK-786, dated 1 October 1987, has been reviewed and determined to be valid for usie in acquisition.

MIL-HDBK-786, MILITARY STANDARDIZATION HANDBOOK, FIELD ASSURANCE OF ACOUSTIC EMISSION SYSTEM OPERATIONUSING SIMULATED ACOUSTIC EMISSION EVENTS. This handbook provides a procedure for assuring the proper operation of an acoustic emission system installed on a field test article.

MIL-HDBK-787 (NOTICE 1), MILITARY HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - ULTRASONIC. MIL-HDBK-787, dated 1 April 1988, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-787, MILITARY STANDARDIZATION HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS-ULTRASONIC. This ocument is intended to provide information on using ultrasound to study several types of discontinuities found in various composite materials.

MIL-HDBK-788 (NOTICE 1), MILITARY HANDBOOK SELECTION OF ACOUSTIC EMISSION SENSORS. MIL-HDBK-788, dated 25 July 1989, hsa been reviewed and determined to be valid for usie in acquisition.

MIL-HDBK-788, MILITARY STANDARDIZATION HANDBOOK SELECTION OF ACOUSTIC EMISSION SENSORS. This handbook provides quidelines for selecting sensors for a particular application.

MIL-HDBK-790 NOT 1, MILITARY HANDBOOK FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED STUCTURAL CERAMICS. The following pages of MIL-HDBK-790 have been revised and supersede the pages listed.

MIL-HDBK-790 (NOTICE 2), FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED STRUCTURAL CERAMICS. Notice 1 of MIL-HDBK-790 is hereby cancelled and is no longer applicable.

MIL-HDBK-790, MILITARY HANDBOOK FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED STRUCTURAL CERAMICS. The objective of this handbook is to provide an efficient and consistent methodology to locate and characterize fracture originis in advanced structural cermics.

MIL-HDBK-791 (AM), MAINTAINABILITY DESIGN TECHNIQUES (METRIC. Maintainability and reliability are the two major system characteristics which combine to form the commonly used effectiveness index availability. Although reliability and maintainability share co-importance, maintainability merits special consideration because of its influence on system maintenance activities, i.e., the expenditure of man-hours and material, which represent significant budgetary costs over the life of the system. Maintenance activities also reduce the operational readiness of a system.

MIL-HDBK-792,MILITARY HANDBOOK PROVE OUT OF PRODUCTION FACILITIES (24 MAR 1989). This handbook covers a statistically based methodology for prove-out of production or manufacturing facilities.

MIL-HDBK-793, NONDESTRUCTIVE ACTIVE TESTING TECHNIQUES FOR STRUCTURAL COMPOSITES. Nondestructive testing is the testing of materials or structures wihtout causing failure of the item being tested.

MIL-HDBK-797, MILITARY HANDBOOK POLYMIDE (NYLON) PLASTICS: PROPERTIES, PROCESSING, PERFORMANCE, AND MILITARY APPLICATIONS. This handbook provides a summary of nylon technology and technical information for these important plastic materials.

MIL-HDBK-798, SYSTEM ENGINEER'S DESIGN FOR DISCARD HANDBOOK. This handbook includes information on design for discard that is useful to the intended audience and is not otherwise conveiently available.

MIL-HDBK-799 (AR), DEPARTMENT OF DEFENSE HANDBOOK FIRE CONTROL SYSTEMS - GENERAL (5 APR 1996)., This handbook was developed to provide guidance and general approaches to the develop- ment of fire control systems. In particular, the handbook has been prepared to aid the designers of Army fire control equipment and to serve as a reference guide for all military and civilian person- nel who may be inte