EverySpec - MIL-HDBK (0700 - 0799) Documents and Specifications

Your free source for specifications, standards, and handbooks

MIL-HDBK (0700 - 0799)

MIL-HDBK-700A, MILITARY STANDARDIZATON HANDBOOK, PLASTICS

Ident. Num:

MIL-HDBK-700

Rev. Num:

MIL-HDBK-700A, The intent of this handbook is to provide fundamental guidelines for engineers and designers concerned with Plastics applications.

MIL-HDBK-701C, MILITARY HANDBOOK BLOCKING, BRACING AND SKIDDING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE

Ident. Num:

MIL-HDBK-701

Rev. Num:

MIL-HDBK-701C, MILITARY HANDBOOK BLOCKING, BRACING AND SKIDDING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE. This handbook covers approved methods of blocking, bracing, skidding, and associated procedures used for the protection of industrial plant equipment (IPE) for shipment and handling.

MIL-HDBK-702 (NOTICE 1), MILITARY STANDARDIZATION HANDBOOK ENGINEERING PRACTICES PRODUCTIVITY ENHANCEMENT

Ident. Num:

MIL-HDBK-702

MIL-HDBK-702 (NOTICE 1), MILITARY STANDARDIZATION HANDBOOK ENGINEERING PRACTICES PRODUCTIVITY ENHANCEMENT. MIL-HDBK-702, dated 1 AUGUST 1985, has been reviewed and determined to be vaild for use.

MIL-HDBK-702, MILITARY STANDARDIZATION HANDBOOK ENGINEERING PRACTICES PRODUCTIVITY ENHANCEMENT

Ident. Num:

MIL-HDBK-702

MIL-HDBK-702, MILITARY STANDARDIZATION HANDBOOK ENGINEERING PRACTICES PRODUCTIVITY ENHANCEMENT OF INDUSTRIAL PLANT EQUIPMENT AND PRODUCTION SUPPORT SYSTEMS. The industrial base activities within the DoD are challenged to improve the productivity of manufacturing in support of DoD maintenance of research and develpment.

MIL-HDBK-705C (NOTICE 1), MILITARY HANDBOOK GENERATOR SETS, ELECTRICAL, MEASUREMENT AND INSTRUMENTAL METHODS.

Ident. Num:

MIL-HDBK-705

Rev. Num:

MIL-HDBK-705C (NOTICE 1), MILITARY HANDBOOK GENERATOR SETS, ELECTRICAL, MEASUREMENT AND INSTRUMENTAL METHODS. MIL-HDBK-705, dated 29 May 1987, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-705C, MILITARY HANDBOOK GENERATOR SETS, ELECTRICAL, MEASUREMENT AND INSTRUMENTAL METHODS

Ident. Num:

MIL-HDBK-705

Rev. Num:

MIL-HDBK-705C, MILITARY HANDBOOK GENERATOR SETS, ELECTRICAL, MEASUREMENT AND INSTRUMENTAL METHODS. This handbook covers two series of methods for measuring and determining characteristics of all electric generators and generator sets as classified by MIL-STD-1332, and associated equipment.

MIL-HDBK-723A, MILITARY HANDBOOK STEEL AND IRON WROUGHT PRODUCTS

Ident. Num:

MIL-HDBK-723

Rev. Num:

MIL-HDBK-723A, MILITARY HANDBOOK STEEL AND IRON WROUGHT PRODUCTS. MIL-HDBK-723A contains technical information and data pertaining to the wrought products of three ferrous materials; wrought iron, carbon steels, and low alloys steels.

MIL-HDBK-725 (NOTICE 1), MILITARY HANDBOOK ADHESIVES A GUIDE TO THEIR PROPERTIES AND USES AS DESCRIBED BY FEDERAL AND MILITARY SPECIFICATIONS.

Ident. Num:

MIL-HDBK-725

MIL-HDBK-725 (NOTICE 1), MILITARY HANDBOOK ADHESIVES A GUIDE TO THEIR PROPERTIES AND USES AS DESCRIBED BY FEDERAL AND MILITARY SPECIFICATIONS. MIL-HDBK-725, dated 1 May 1972, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-725, MILITARY HANDBOOK ADHESIVES A GUIDE TO THEIR PROPERTIES AND USES AS DESCRIBED BY FEDERAL AND MILITARY SPECIFICATIONS.

Ident. Num:

MIL-HDBK-725

MIL-HDBK-725, MILITARY HANDBOOK ADHESIVES A GUIDE TO THEIR PROPERTIES AND USES AS DESCRIBED BY FEDERAL AND MILITARY SPECIFICATIONS. This handbook covers the salient properties and intended uses of all current Federal and Military specifications on adhesives.

MIL-HDBK-727 (NOTICE 1), MILITARY HANDBOOK DESIGN GUIDANCE FOR PRODUCIBILITY

Ident. Num:

MIL-HDBK-727

MIL-HDBK-727 (NOTICE 1), MILITARY HANDBOOK DESIGN GUIDANCE FOR PRODUCIBILITY. MIL-HDBK-727, dated 5 April 1984, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-727, MILITARY HANDBOOK DESIGN GUIDANCE FOR PRODUCIBILITY

Ident. Num:

MIL-HDBK-727

MIL-HDBK-727, MILITARY HANDBOOK DESIGN GUIDANCE FOR PRODUCIBILITY. This document provides the design engineer with information to assist him in reducing or eliminating design features that would make producibility difficult to achieve.

MIL-HDBK-728/1 (NOTICE 1), MILITARY HANDBOOK NONDESTRUCTIVE TESTING

Ident. Num:

MIL-HDBK-728

Rev. Num:

MIL-HDBK-728/1 (NOTICE 1), MILITARY HANDBOOK NONDESTRUCTIVE TESTING. MIL-HDBK-728/1, dated 16 December 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-728/1, MILITARY HANDBOOK NONDESTRUCTIVE TESTING

Ident. Num:

MIL-HDBK-728

Rev. Num:

MIL-HDBK-728/1, MILITARY HANDBOOK NONDESTRUCTIVE TESTING. Although this handbook is provided as a guide to all those employed in nondestructive testing (NDT), it will be of specific interest to administrators, designers, production engineers, quality assurance personnel, and nondestructive test engineers and technicians.

MIL-HDBK-728/2 (NOTICE 1), MILITARY HANDBOOK EDDY CURRENT TESTING

Ident. Num:

MIL-HDBK-728

Rev. Num:

MIL-HDBK-728/2 (NOTICE 1), MILITARY HANDBOOK EDDY CURRENT TESTING. MIL-HDBK-728/2, dated 16 December 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-728/2, MILITARY HANDBOOK EDDY CURRENT TESTING

Ident. Num:

MIL-HDBK-728

Rev. Num:

MIL-HDBK-728/2, MILITARY HANDBOOK EDDY CURRENT TESTING. Provides the fundamental principles and guides associated with eddy current testing.

MIL-HDBK-728/3 (NOTICE 1), MILITARY HANDBOOK LIQUID PENETRANT TESTING

Ident. Num:

MIL-HDBK-728

Rev. Num:

MIL-HDBK-728/3 (NOTICE 1), MILITARY HANDBOOK LIQUID PENETRANT TESTING. MIL-HDBK-728_3, dated 16 December 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-728/3, MILITARY HANDBOOK LIQUID PENETRANT TESTING

Ident. Num:

MIL-HDBK-728

Rev. Num:

MIL-HDBK-728/3, MILITARY HANDBOOK LIQUID PENETRANT TESTING. Presents the fundamental principles and guidelines associated with liquid penetrant testing.

MIL-HDBK-728/4A, MILITARY HANDBOOK MAGNETIC PARTICLE TESTING

Ident. Num:

MIL-HDBK-728

Rev. Num:

MIL-HDBK-728/4A, MILITARY HANDBOOK MAGNETIC PARTICLE TESTING. This document is intended to provide information on the use of magnetic particle testing and inspection both broad and specific applications.

MIL-HDBK-728/5A, MILITARY HANDBOOK MIL-HDBK-728/5A RADIOLOGIC TESTING

Ident. Num:

MIL-HDBK-728

Rev. Num:

MIL-HDBK-728/5A., MILITARY HANDBOOK MIL-HDBK-728/5A RADIOLOGIC TESTING. Radiologic examination provides a nondestructive method of inspecting the internal continuity of a specimen.

MIL-HDBK-728/6, MILITARY HANDBOOK ULTRASONIC TESTING

Ident. Num:

MIL-HDBK-728

Rev. Num:

MIL-HDBK-728/6, MILITARY HANDBOOK ULTRASONIC TESTING. Ultrasonic testing employs high-frequency mechanical waves to detect various material variables.

MIL-HDBK-729 NOT 1, MILITARY HANDBOOK CORROSION AND CORROSION PREVENTION METALS

Ident. Num:

MIL-HDBK-729

Rev. Num:

MIL-HDBK-729 (Notice 1)., MILITARY HANDBOOK CORROSION AND CORROSION PREVENTION METALS. MIL-HDBK-729, dated 21 November 1983 has been reviewed and determined to be valid for usie in acquisition.

MIL-HDBK-729, MILITARY STANDARDIZATION HANDBOOK, CORROSION AND CORROSION PREVENTION METALS (21 NOV 1983)

Ident. Num:

MIL-HDBK-729

MIL-HDBK-729, MILITARY STANDARDIZATION HANDBOOK, CORROSION AND CORROSION PREVENTION METALS (21 NOV 1983). This handbook provides basic and fundemental information on corrosion and corrosion prevention of metals for the guidance of engineers and designers of military material,

MIL-HDBK-730 (NOTICE 1), MILITARY HANDBOOK MATERIALS JOINING

Ident. Num:

MIL-HDBK-730

Rev. Num:

MIL-HDBK-730 (NOTICE 1), MILITARY HANDBOOK MATERIALS JOINING. MIL-HDBK-730, dated 31 January 1986, has been reviewed and determined to be vaild for use in acquisition.

MIL-HDBK-730, MILITARY STANDARDIZATION HANDBOOK ON MATERIALS JOINING

Ident. Num:

MIL-HDBK-730

Rev. Num:

MIL-HDBK-730.pdf MILITARY STANDARDIZATION HANDBOOK ON MATERIALS JOINING. The purpose of this handbook is to provide Department of Defense engineering and quality assurance personnel with the basic principles and general knwoledge of materials joining processes.

MIL-HDBK-731 NOT 1, MILITARY HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - THERMOGRAPHY

Ident. Num:

MIL-HDBK-731

Rev. Num:

MIL-HDBK-731 (NOTICE 1), MILITARY HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - THERMOGRAPHY. MIL-HDBK-731, dated 1 August 1984, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-731, MILITARY STANDARDIZATION HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - THERMOGRAPHY

Ident. Num:

MIL-HDBK-731

Rev. Num:

MIL-HDBK-731, MILITARY STANDARDIZATION HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - THERMOGRAPHY. This is the first volume of a nine volume series on nondestructive testing of composite materials.

MIL-HDBK-732A, MILITARY HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS ACOUSTIC EMISSION

Ident. Num:

MIL-HDBK-732

Rev. Num:

MIL-HDBK-732A, MILITARY HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS ACOUSTIC EMISSION.Technical priniciples will be discussed which must be followed in order to insure that a technically sound Acoustic Emission (AE) test is performed on a composite sample.

MIL-HDBK-735 (MR), MILITARY HDBK MATERIAL DETERIORATION PREVENTION AND CONTROL GUIDE FOR ARMY MATERIEL, PART ONE, METALS

Ident. Num:

MIL-HDBK-735

MIL-HDBK-735 (MR), MILITARY HDBK MATERIAL DETERIORATION PREVENTION AND CONTROL GUIDE FOR ARMY MATERIEL, PART ONE, METALS. The purpose of this handbook is to provide information needed to avoid or control corrosion of metals used in Army materiel. To the extent that this information is applied, the objectives of reducing costs and improving readiness are achieved.

MIL-HDBK-737A., MILITARY HANDBOOK HANDBOOK FOR TEXTILE LABORATORY PERSONNEL

Ident. Num:

MIL-HDBK-737

Rev. Num:

MIL-HDBK-737A., MILITARY HANDBOOK HANDBOOK FOR TEXTILE LABORATORY PERSONNEL. The major purpose of this handbook is to provide guidance to laboratory personnel in carrying out some of the basic test in FED-STD-191 used in the acceptance of textiles procured by the Government.

MIL-HDBK-739 NOT 1, MILITARY HANDBOOK FIELD REFRIGERATION EQUIPMENT

Ident. Num:

MIL-HDBK-739

Rev. Num:

MIL-HDBK-739 (NOTICE 1), MILITARY HANDBOOK FIELD REFRIGERATION EQUIPMENT. Military satandardization Handbook MIL-HDBK-739 dated 18 June 1970 has been reviewed and determined to be current.

MIL-HDBK-739, MILITARY STANDARDIZATION HANDBOOK FIELD REFRIGERATION EQUIPMENT

Ident. Num:

MIL-HDBK-739

MIL-HDBK-739, MILITARY STANDARDIZATION HANDBOOK FIELD REFRIGERATION EQUIPMENT. This handbook provides information and guidance to personnel preparing technical manuals, technical bulletins and other documents for field use. The handbook is not intended to be referenced in purchase specifications, nor shall it supersede any specification requirements

MIL-HDBK-740 NOT 1, MILITARY HANDBOOK DISWASHING OPERATIONS

Ident. Num:

MIL-HDBK-740

Rev. Num:

MIL-HDBK-740 (NOTICE) 1, MILITARY HANDBOOK DISWASHING OPERATIONS. MIL-HDBK-740, dated 28 December 1972, is hereby canceled without replacement.

MIL-HDBK-740, MILTIARY STANDARDIZATION HANDBOOK DISHWASHING OPERATIONS.

Ident. Num:

MIL-HDBK-740

Rev. Num:

MIL-HDBK-740, MILTIARY STANDARDIZATION HANDBOOK DISHWASHING OPERATIONS. This handbook contains information concerning the equipment, supplies, and procedures for the cleaning of tableware in single-tank and multiple-tank dishwashing machines, hand washing in kitchens and hand washing in the field.

MIL-HDBK-741 NOT 1, MILITARY HANDBOOK FABRIC DESIGN

Ident. Num:

MIL-HDBK-741

Rev. Num:

MIL-HDBK-741 (NOTICE 1), MILITARY HANDBOOK FABRIC DESIGN. Miitary handbook MIL-HDBK-741(GL) dated 23 July 1974 has been reviewed and determined to be current.

MIL-HDBK-741, MILITARY STANDARDIZATION HANDBOOK FABRIC DESIGN

Ident. Num:

MIL-HDBK-741

Rev. Num:

MIL-HDBK-741, MILITARY STANDARDIZATION HANDBOOK FABRIC DESIGN. The tables in this handbook are presented to facilitate the designing of high-texture or maximum-weavable fabrics.

MIL-HDBK-753, MILITARY STANDARDIZATION HANDBOOK CB COLLECTIVE PROTECTION OF MOBILE VEHICLES, VANS AND SHELTERS

Ident. Num:

MIL-HDBK-753

Rev. Num:

MIL-HDBK-753, MILITARY STANDARDIZATION HANDBOOK CB COLLECTIVE PROTECTION OF MOBILE VEHICLES, VANS AND SHELTERS. This handbook summarizes the state of the art for positive pressure CB collective protection shelters and contains information useful for the planning, design, testing, and evaluation of collective protection equipment.

MIL-HDBK-754, MILITARY HANDBOOK PLASTIC MATRIX COMPOSITES WITH CONTINUOUS FIBER REINFORCEMENT

Ident. Num:

MIL-HDBK-754

Rev. Num:

MIL-HDBK-754, MILITARY HANDBOOK PLASTIC MATRIX COMPOSITES WITH CONTINUOUS FIBER REINFORCEMENT. The plastic matrix composites discussed in this handbook contain continous fibers, in either a nonwoven or woven form, embedded in a common plastic matrix.

MIL-HDBK-755 (AR), MILITARY HDBK PLASTIC MATERIAL PROPERTIES FOR ENGINEERING DESIGN

Ident. Num:

MIL-HDBK-755

Rev. Num:

MIL-HDBK-755 (AR), MILITARY HDBK PLASTIC MATERIAL PROPERTIES FOR ENGINEERING DESIGN. An overview of plastic materials, including their classification and insight into their polymer structure, and a review of material properties and American Society for Testing and Materials (ASTM) standards for testing are presented. A brief discussion of environmental factors and their influence on properties is included.

MIL-HDBK-756, MILITARY HANDBOOK MANUFACTURE OF PROJECTILES, PROJECTILE COMPONENTS, AND CARTRIDGE CASES FOR ARTILLERY, TANK MAIN ARMAMENT, AND MORTARS

Ident. Num:

MIL-HDBK-756

Rev. Num:

MIL-HDBK-756, MILITARY HANDBOOK MANUFACTURE OF PROJECTILES, PROJECTILE COMPONENTS, AND CARTRIDGE CASES FOR ARTILLERY, TANK MAIN ARMAMENT, AND MORTARS. This expanded revision of AMCP 706-249 covers aspects relating to production of munitions that the design engineer must consider early in the development stage of the life cycle.

MIL-HDBK-757, MILITARY HANDBOOK FUZES

Ident. Num:

MIL-HDBK-757

Rev. Num:

MIL-HDBK-757, MILITARY HANDBOOK FUZES.

MIL-HDBK-759B NOT 1, MILITARY HANDBOOK HUMAN FACTORS ENGINEERING DESIGN FOR ARMY MATERIEL

Ident. Num:

MIL-HDBK-759

Rev. Num:

MIL-HDBK-759B (NOTICE 1), MILITARY HANDBOOK HUMAN FACTORS ENGINEERING DESIGN FOR ARMY MATERIEL. The following pages of the MIL-HDBK-759B have been revised and supersede the pages listed

MIL-HDBK-759B NOT 2, MILITARY HANDBOOK HUMAN FACTORS ENGINEERING DESIGN FOR ARMY MATERIEL

Ident. Num:

MIL-HDBK-759

Rev. Num:

MIL-HDBK-759B (NOTICE 2), MILITARY HANDBOOK HUMAN FACTORS ENGINEERING DESIGN FOR ARMY MATERIEL. The following pages of MIL-HDBK-759B have been revised and supersede the pages listed.

MIL-HDBK-759B, MILITARY HANDBOOK HUMAN FACTORS ENGINEERING DESIGN FOR ARMY MATERIEL METRIC

Ident. Num:

MIL-HDBK-759

Rev. Num:

MIL-HDBK-759B, MILITARY HANDBOOK HUMAN FACTORS ENGINEERING DESIGN FOR ARMY MATERIEL METRIC. This handbook provides human factors engineering guidelines, preferred practices, and reference data for design of Army materiel.

MIL-HDBK-759C NOT 1, DEPARTMENT OF DEFENSE HANDBOOK HUMAN ENGINEERING DESIGN GUIDELINES

Ident. Num:

MIL-HDBK-759

Rev. Num:

MIL-HDBK-759C (NOTICE 1), DEPARTMENT OF DEFENSE HANDBOOK HUMAN ENGINEERING DESIGN GUIDELINES. The following pages of MIL-HDBK-759C have been revised and supersede the pages listed.

MIL-HDBK-759C NOT 2, DEPARTMENT OF DEFENSE HANDBOOK HUMAN ENGINEERING DESIGN GUIDELINES

Ident. Num:

MIL-HDBK-759

Rev. Num:

MIL-HDBK-759C (NOTICE 2), DEPARTMENT OF DEFENSE HANDBOOK HUMAN ENGINEERING DESIGN GUIDELINES.The following pages of MIL-HDBK-759C have been revised and supersede the pages listed.

MIL-HDBK-759C, HANDBOOK FOR HUMAN ENGINEERING DESIGN GUIDELINES

Ident. Num:

MIL-HDBK-759

Rev. Num:

MIL-HDBK-759C. This document provides basic guidelines and data on human engineering design for military systems, equipment, and facilities. This handbook has been designed to supplement MIL-STD-1472D.

MIL-HDBK-761A NOT 1, DEPARTMENT OF DEFENSE HANDBOOK HUMAN ENGINEERING GUIDELINES FOR MANAGEMENT INFORMATION SYSTEMS

Ident. Num:

MIL-HDBK-761

Rev. Num:

MIL-HDBK-761A (NOTICE 1), DEPARTMENT OF DEFENSE HANDBOOK HUMAN ENGINEERING GUIDELINES FOR MANAGEMENT INFORMATION SYSTEMS. MIL-HDBK-761A, dated 30 September 1989, is hereby cancelled without replacement.

MIL-HDBK-761A, HUMAN ENGINEERING GUIDELINES FOR MANAGEMENT INFORMATION SYSTEMS

Ident. Num:

MIL-HDBK-761

Rev. Num:

The purpose of this document is to,provide human factors engineering design guidance for the analysis, design, and evaluation of computer based Management Information Systems. Guidance is presented in the form of 1) analysis and design techniques which should be applied to the development and evaluation of User-Computer Interface (UCI) design concepts, and 2), design guidelines which should be used during UCI requirements analysis, design, development, test and integration.

MIL-HDBK-762 (NOTICE 2), MILITARY HANDBOOK DESIGN OF AERODYNAMICALLY STABILIZED FREE ROCKETS (8 MAR 2006

Ident. Num:

MIL-HDBK-762

Rev. Num:

MIL-HDBK-762 (NOTICE 2), MILITARY HANDBOOK DESIGN OF AERODYNAMICALLY STABILIZED FREE ROCKETS (8 MAR 2006)., Design of Aerodynamically Stabilized Free Rockets MIL-HDBK-762, dated 24 October 2000, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-762 NOT 1, MILITARY HANDBOOK

Ident. Num:

MIL-HDBK-762

Rev. Num:

MIL-HDBK-762 (NOTICE 1), MILITARY HANDBOOK DESIGN OF AERODYNAMICALLY STABILIZED FREE ROCKETS. MIL-HDBK-762, dated 17 July 1990, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-762, MILITARY HANDBOOK DESIGN OF AERODYNAMICALLY STABILIZED FREE ROCKETS

Ident. Num:

MIL-HDBK-762

Rev. Num:

MIL-HDBK-762, MILITARY HANDBOOK DESIGN OF AERODYNAMICALLY STABILIZED FREE ROCKETS. This handbook, which is primarily intended for conceptual and preliminiary design, divides system design into three phases: (1) concept selection, (2) preliminary design, and (3) systems validation.

MIL-HDBK-764, SYSTEM SAFETY ENGINEERING DESIGN GUIDE FOR ARMY MATERIEL (12 JAN 1990)

Ident. Num:

MIL-HDBK-764

Rev. Num:

MIL-HDBK-764, SYSTEM SAFETY ENGINEERING DESIGN GUIDE FOR ARMY MATERIEL (12 JAN 1990). This chapter, which provides an initial overview of system safety within the US Army, begins by contrasting the obsolete principles that have guided the safety policies of the Army in the past with up-to-date principles that guide the policies of today.

MIL-HDBK-765 NOT 1, MILITARY HANDBOOK GUIDELINES FOR SAFE DESIGN OF POLYPHASE ELECTRICAL SYSTEMS

Ident. Num:

MIL-HDBK-765

Rev. Num:

MIL-HDBK-765 (NOTICE 1), MILITARY HANDBOOK GUIDELINES FOR SAFE DESIGN OF POLYPHASE ELECTRICAL SYSTEMS. The following pages of MIL-HDBK-765(MD) have been revised and supersede the pages listed.

MIL-HDBK-765 NOT 2, MILITARY HANDBOOK GUIDELINES FOR SAFE DESIGN OF POLYPHASE ELECTRICAL SYSTEMS

Ident. Num:

MIL-HDBK-765

Rev. Num:

MIL-HDBK-765 (NOTICE 2), MILITARY HANDBOOK GUIDELINES FOR SAFE DESIGN OF POLYPHASE ELECTRICAL SYSTEMS. MIL-HDBK-765 (MI)is inactive for new design and is no longer used, except for replacement purposes.

MIL-HDBK-765, MILITARY HANDBOOK GUIDELINES FOR SAFE DESIGN OF POLYPHASE ELECTRICAL SYSTEMS

Ident. Num:

MIL-HDBK-765

Rev. Num:

MIL-HDBK-765, MILITARY HANDBOOK GUIDELINES FOR SAFE DESIGN OF POLYPHASE ELECTRICAL SYSTEMS. Covered in this handbook are polyphase electrical systems used by the US Army that either may be powered continuously by an engine-driven-generator set or powered by a backup engine-driven-generator set, which supplies power when the primary supply is disabled.

MIL-HDBK-766 NOT 1, MILITARY HANDBOOK DESIGN TO COST

Ident. Num:

MIL-HDBK-766

Rev. Num:

MIL-HDBK-766 (NOTICE 1), MILITARY HANDBOOK DESIGN TO COST. MIL-HDBK-766, dated 25 August 1989, is hereby canceled without replacement.

MIL-HDBK-766, MILITARY HANDBOOK DESIGN TO COST

Ident. Num:

MIL-HDBK-766

Rev. Num:

MIL-HDBK-766, MILITARY HANDBOOK DESIGN TO COST. This handbook provides information and guidance for appliation of the DTC policies contained in Department of Defense Directive (DODD) 4245.3, "Design to Cost."

MIL-HDBK-767, MILITARY HANDBOOK DESIGN GUIDANCE FOR INTERIOR NOISE REDUCTION IN LIGHT-ARMORED TRACKED VEHICLES (17 SEP 1993)

Ident. Num:

MIL-HDBK-767

Rev. Num:

MIL-HDBK-767, MILITARY HANDBOOK DESIGN GUIDANCE FOR INTERIOR NOISE REDUCTION IN LIGHT-ARMORED TRACKED VEHICLES (17 SEP 1993). Techniques available to reduce interior noise in light-armored tracked vehicles are discussed.

MIL-HDBK-770A NOT 1, MILITARY HANDBOOK SHRINK FILM/STRETCH FILM IN MILITARY PACKAGING

Ident. Num:

MIL-HDBK-770

Rev. Num:

MIL-HDBK-770A (NOTICE 1), MILITARY HANDBOOK SHRINK FILM/STRETCH FILM IN MILITARY PACKAGING. MIL-HDBK-770A, dated 13 September 1985, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-770A, MILITARY STANDARDIZATION HDBK SHRINK FILM/STRECH FILM IN MILITARY PACKAGING

Ident. Num:

MIL-HDBK-770

Rev. Num:

MIL-HDBK-770A, MILITARY STANDARDIZATION HDBK SHRINK FILM/STRECH FILM IN MILITARY PACKAGING. This standardization handbook was developed for use by DOD activities having applications for shrink film and/or stretch film in packaging for shipment or storage. This publication was approved on 13 September 1985 for printing and inclusion in the military standardization handbook series. This two-part document provides basic and fundamental information on the use of shrink-film/stretch-film packaging applications and equipment. It provides basic information to personnel engaged in developing packaging directives as well as to personnel involved in actual packaging of materiel for storage and distribution. This handbook is not intended to be referenced in purchase specifications except for informational purposes, nor shall it supersede any specification requirements.

MIL-HDBK-773 NOT 1, MILITARY HANDBOOK ELECTROSTATIC DISCHARGE

Ident. Num:

MIL-HDBK-773

Rev. Num:

MIL-HDBK-773 (NOTICE 1), MILITARY HANDBOOK ELECTROSTATIC DISCHARGE. The following pages of MIL-HDBK-773 have been revised and supersede the pages listed.

MIL-HDBK-773, MILITARY HANDBOOK ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING

Ident. Num:

MIL-HDBK-773

Rev. Num:

MIL-HDBK-773, MILITARY HANDBOOK ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING. This handbook provides detailed guidance for DOD personnel who use, handle, package, or store ESDS items.

MIL-HDBK-773A, DEPARTMENT OF DEFENSE HANDBOOK ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING (30 JUN 2005)

Ident. Num:

MIL-HDBK-773

Rev. Num:

MIL-HDBK-773A, DEPARTMENT OF DEFENSE HANDBOOK ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING (30 JUN 2005)., This handbook provides detailed guidance for DoD personnel who use, handle, package, or store Electrostatic Discharge Sensitive (ESDS) items. It is designed to promote the use of standardized packaging materials as well as promote an understanding of the Electrostatic Discharge (ESD) threat through all levels of maintenance and supply. This handbook is for guidance only and cannot be cited as a requirement.

MIL-HDBK-774 NOT 1, MILITARY STANDARD PALLETIZED UNIT LOADS

Ident. Num:

MIL-HDBK-774

Rev. Num:

MIL-HDBK-774 (NOTICE 1), MILITARY STANDARD PALLETIZED UNIT LOADS. MIL-STD-147D, dated 10 December 1988, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-774, DEPARTMENT OF DEFENSE HANDBOOK PALLETIZED UNIT LOADS (25 MAR 1996)

Ident. Num:

MIL-HDBK-774

Rev. Num:

MIL-HDBK-774, DEPARTMENT OF DEFENSE HANDBOOK PALLETIZED UNIT LOADS (25 MAR 1996). This standard establishes the methods, materials, and techniques to be employed in the formation of bonded palletized unit loads of military supplies which are adaptable to unit loading.

MIL-HDBK-774A, DEPARTMENT OF DEFENSE HANDBOOK PALLETIZED UNIT LOADS (30 AUG 2004)

Ident. Num:

MIL-HDBK-774

Rev. Num:

MIL-HDBK-774A, DEPARTMENT OF DEFENSE HANDBOOK PALLETIZED UNIT LOADS (30 AUG 2004). This handbook establishes the methods, materials, and techniques to be employed in the formation of bonded palletized unit loads of military supplies, which are adaptable to unit loading. The methods prescribed herein are to be utilized with standard, general purpose, 40- by 48-inch pallets conforming to the various classes, types, and styles in ASME MH 1, Part 9. However, the various methods of bonding and types of storage aids may be modified for use with other size pallets. This handbook will not be used for the palletization of ammunition, explosives, or semi-perishable subsistence unless specifically prescribed by the cognizant technical activity. (Ammunition unit loads should be in accordance with MIL-STD-1660, while semi-perishable subsistence unit loads will be in accordance with DSCP Form 3507.) This handbook is for guidance only and cannot be cited as a requirement.

MIL-HDBK-775, HANDBOOK FOAM-IN-PLACE PACKAGING, PROCEDURES FOR (19 APR 1996)

Ident. Num:

MIL-HDBK-775

Rev. Num:

MIL-HDBK-775, HANDBOOK FOAM-IN-PLACE PACKAGING, PROCEDURES FOR (19 APR 1996). This standard provides the requirements and procedures (techniques) for packaging aupplies using foam-in-place (FIP) materials.

MIL-HDBK-776 NOT 1, MILITARY HANDBOOK SHAFTS, ELASTIC TORSIONAL STRESS ANALYSIS OF

Ident. Num:

MIL-HDBK-776

Rev. Num:

MIL-HDBK-776 (NOTICE 1), MILITARY HANDBOOK SHAFTS, ELASTIC TORSIONAL STRESS ANALYSIS OF. MIL-HDBK-776, dated 15 September 1981, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-776 NOT 2, MILITARY HANDBOOK SHAFTS, ELASTICS TORSIONAL STRESS ANALYSIS OF

Ident. Num:

MIL-HDBK-776

Rev. Num:

MIL-HDBK-776 NOT 2, MILITARY HANDBOOK SHAFTS, ELASTICS TORSIONAL STRESS ANALYSIS OF. MIL-HDBK-776, dated 15 September 1981, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-776, MILITARY HANDBOOK SHAFTS, ELASTIC TORSIONAL STRESS ANALYSIS OF DEPARTMENT OF DEFENSE

Ident. Num:

MIL-HDBK-776

Rev. Num:

MIL-HDBK-776, MILITARY HANDBOOK SHAFTS, ELASTIC TORSIONAL STRESS ANALYSIS OF DEPARTMENT OF DEFENSE. Design charts and tables have been developed for the elastic torisional stress analyses of free prismatic shafts, splines and spring bars with virtually all common industrially encountered thick cross sections.

MIL-HDBK-780B, MILITARY HANDBOOK STANDARDIZED MILITARY DRAWINGS

Ident. Num:

MIL-HDBK-780

Rev. Num:

MIL-HDBK-780B, MILITARY HANDBOOK STANDARDIZED MILITARY DRAWINGS. This handbook provides guidance and infromation concerning standardized military drawings (SMD's)>

MIL-HDBK-780C, DEPARTMENT OF DEFENSE HANDBOOK STANDARD MICROCIRCUIT DRAWINGS

Ident. Num:

MIL-HDBK-780

Rev. Num:

MIL-HDBK-780C, DEPARTMENT OF DEFENSE HANDBOOK STANDARD MICROCIRCUIT DRAWINGS. This handbook provides guidance and information concerning standard microcircuit drawings (SMD's).

MIL-HDBK-780D, DEPARTMENT OF DEFENSE HANDBOOK STANDARD MICROCIRCUIT DRAWINGS (28 MAY 2004)

Ident. Num:

MIL-HDBK-780

Rev. Num:

MIL-HDBK-780D, DEPARTMENT OF DEFENSE HANDBOOK STANDARD MICROCIRCUIT DRAWINGS (28 MAY 2004). This handbook provides guidance and information concerning standard microcircuit drawings (SMD's).

MIL-HDBK-781, RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION, AND PRODUCTION

Ident. Num:

MIL-HDBK-781

MIL-HDBK-781, RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION, AND PRODUCTION. This handbook provides test methods, test plans, and test environment profiles which can be used in reliability testing during the development, qualification and production of systems and equipment.

MIL-HDBK-781A, HANDBOOK FOR RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING, DEVELOPMENT QUALIFICATION, AND PRODUCTION

Ident. Num:

MIL-HDBK-781

Rev. Num:

MIL-HDBK-781A, HANDBOOK FOR RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING, DEVELOPMENT QUALIFICATION, AND PRODUCTION. This handbook provides test methods, test plans, and test environmental profiles which can be used in reliability testing during the development, qualification, and production of systems and equipment.

MIL-HDBK-781A, RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION, AND PRODUCTION

Ident. Num:

MIL-HDBK-781

Rev. Num:

MIL-HDBK-781A, RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION, AND PRODUCTION. This handbook provides test methods, test plans, and test environmental profiles which can be used in reliability testing during the development, qualification, and production of systems and equipment.

MIL-HDBK-782 NOT 1, MILITARY STANDARD SOFTWARE SUPPORT ENVIRONMENT ACQUISITION

Ident. Num:

MIL-HDBK-782

Rev. Num:

MIL-HDBK-782 NOT 1, MILITARY STANDARD SOFTWARE SUPPORT ENVIRONMENT ACQUISITION. MIL-HDBK-782(AR), dated 29 February 1988, is hereby canceled. See MIL-HDBK-1467.

MIL-HDBK-782, MILITARY HANDBOOK SOFTWARE SUPPORT ENVIRONMENT ACQUISTION

Ident. Num:

MIL-HDBK-782

Rev. Num:

MIL-HDBK-782, MILITARY HANDBOOK SOFTWARE SUPPORT ENVIRONMENT ACQUISTION. MIL-HDBK-782(AR) provides a common interpretation of the requirement and uses DOD-STD-1467 and the information needed to use it effectively.

MIL-HDBK-783, MILITARY HANDBOOK CHEMICAL AND BIOLOGICAL (CB) CONTAMINATION AVOIDANCE AND DECONTAMINATION

Ident. Num:

MIL-HDBK-783

Rev. Num:

MIL-HDBK-783, MILITARY HANDBOOK CHEMICAL AND BIOLOGICAL (CB) CONTAMINATION AVOIDANCE AND DECONTAMINATION. This handbook is primarily for project managers, design engineers, and scientist who need an overview of potential threat agents, available decontamination and contamination avoidance countermeasures, and design systems that can operate effectively in a CB-agent-contaminated environment.

MIL-HDBK-784,MILITARY HANDBOOK GUIDELINES-DESIGN TO MINIMIZE CONTAMINATION AND TO FACILITATE DECONTAMINATION OF MILITARY VEHICLES AND OTHER EQUIPMENT

Ident. Num:

MIL-HDBK-784

Rev. Num:

MIL-HDBK-784, MILITARY HANDBOOK GUIDELINES-DESIGN TO MINIMIZE CONTAMINATION AND TO FACILITATE DECONTAMINATION OF MILITARY VEHICLES AND OTHER EQUIPMENT: INTERIROS AND EXTERIORS. This handbook provides guidelines for designing military equipment so as to minimze contamination by nuclear, biological, and chemical (NBC) agents and to increase the effectiveness of decontamination processes.

MIL-HDBK-785 (AR), MILITARY HANDBOOK, DESIGN OF TOWED ARTILLERY SYSTEMS

Ident. Num:

MIL-HDBK-785 (AR)

MIL-HDBK-785 (AR), DESIGN OF TOWED ARTILLERY SYSTEMS

MIL-HDBK-786 NOT 1, MILITARY HANDBOOK FIELD ASSURANCE OF ACOUSTIC EMISSION SYSTEM OPERATION USING SIMULATED ACOUSTIC EMISSION EVENTS

Ident. Num:

MIL-HDBK-786

Rev. Num:

MIL-HDBK-786 NOT 1, MILITARY HANDBOOK FIELD ASSURANCE OF ACOUSTIC EMISSION SYSTEM OPERATION USING SIMULATED ACOUSTIC EMISSION EVENTS. MIL-HDBK-786, dated 1 October 1987, has been reviewed and determined to be valid for usie in acquisition.

MIL-HDBK-786, MILITARY STANDARDIZATION HANDBOOK, FIELD ASSURANCE OF ACOUSTIC EMISSION SYSTEM OPERATIONUSING SIMULATED ACOUSTIC EMISSION EVENTS

Ident. Num:

MIL-HDBK-786

Rev. Num:

MIL-HDBK-786, MILITARY STANDARDIZATION HANDBOOK, FIELD ASSURANCE OF ACOUSTIC EMISSION SYSTEM OPERATIONUSING SIMULATED ACOUSTIC EMISSION EVENTS. This handbook provides a procedure for assuring the proper operation of an acoustic emission system installed on a field test article.

MIL-HDBK-787 NOT 1, MILITARY HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - ULTRASONIC

Ident. Num:

MIL-HDBK-787

Rev. Num:

MIL-HDBK-787 (NOTICE 1), MILITARY HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - ULTRASONIC. MIL-HDBK-787, dated 1 April 1988, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-787, MILITARY STANDARDIZATION HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS-ULTRASONIC

Ident. Num:

MIL-HDBK-787

Rev. Num:

MIL-HDBK-787, MILITARY STANDARDIZATION HANDBOOK NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS-ULTRASONIC. This ocument is intended to provide information on using ultrasound to study several types of discontinuities found in various composite materials.

MIL-HDBK-788 NOT 1, MILITARY HANDBOOK SELECTION OF ACOUSTIC EMISSION SENSORS

Ident. Num:

MIL-HDBK-788

Rev. Num:

MIL-HDBK-788 (NOTICE 1), MILITARY HANDBOOK SELECTION OF ACOUSTIC EMISSION SENSORS. MIL-HDBK-788, dated 25 July 1989, hsa been reviewed and determined to be valid for usie in acquisition.

MIL-HDBK-788. MILITARY STANDARDIZATION HANDBOOK SELECTION OF ACOUSTIC EMISSION SENSORS

Ident. Num:

MIL-HDBK-788

Rev. Num:

MIL-HDBK-788, MILITARY STANDARDIZATION HANDBOOK SELECTION OF ACOUSTIC EMISSION SENSORS. This handbook provides quidelines for selecting sensors for a particular application.

MIL-HDBK-790 NOT 1, MILITARY HANDBOOK FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED STUCTURAL CERAMICS

Ident. Num:

MIL-HDBK-790

Rev. Num:

MIL-HDBK-790 NOT 1, MILITARY HANDBOOK FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED STUCTURAL CERAMICS. The following pages of MIL-HDBK-790 have been revised and supersede the pages listed.

MIL-HDBK-790 NOT 2, FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED STRUCTURAL CERAMICS

Ident. Num:

MIL-HDBK-790

Rev. Num:

MIL-HDBK-790 (NOTICE 2), FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED STRUCTURAL CERAMICS. Notice 1 of MIL-HDBK-790 is hereby cancelled and is no longer applicable.

MIL-HDBK-790, MILITARY HANDBOOK FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED STRUCTURAL CERAMICS

Ident. Num:

MIL-HDBK-790

Rev. Num:

MIL-HDBK-790, MILITARY HANDBOOK FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED STRUCTURAL CERAMICS. The objective of this handbook is to provide an efficient and consistent methodology to locate and characterize fracture originis in advanced structural cermics.

MIL-HDBK-791 (AM), MAINTAINABILITY DESIGN TECHNIQUES (METRIC)

Ident. Num:

MIL-HDBK-791

MIL-HDBK-791 (AM), MAINTAINABILITY DESIGN TECHNIQUES (METRIC. Maintainability and reliability are the two major system characteristics which combine to form the commonly used effectiveness index availability. Although reliability and maintainability share co-importance, maintainability merits special consideration because of its influence on system maintenance activities, i.e., the expenditure of man-hours and material, which represent significant budgetary costs over the life of the system. Maintenance activities also reduce the operational readiness of a system.

MIL-HDBK-792,MILITARY HANDBOOK PROVE OUT OF PRODUCTION FACILITIES (24 MAR 1989)

Ident. Num:

MIL-HDBK-792

Rev. Num:

MIL-HDBK-792,MILITARY HANDBOOK PROVE OUT OF PRODUCTION FACILITIES (24 MAR 1989). This handbook covers a statistically based methodology for prove-out of production or manufacturing facilities.

MIL-HDBK-793, NONDESTRUCTIVE ACTIVE TESTING TECHNIQUES FOR STRUCTURAL COMPOSITES

Ident. Num:

MIL-HDBK-793

Rev. Num:

MIL-HDBK-793, NONDESTRUCTIVE ACTIVE TESTING TECHNIQUES FOR STRUCTURAL COMPOSITES. Nondestructive testing is the testing of materials or structures wihtout causing failure of the item being tested.

MIL-HDBK-797, MILITARY HANDBOOK POLYMIDE (NYLON) PLASTICS: PROPERTIES, PROCESSING, PERFORMANCE, AND MILITARY APPLICATIONS

Ident. Num:

MIL-HDBK-797

Rev. Num:

MIL-HDBK-797, MILITARY HANDBOOK POLYMIDE (NYLON) PLASTICS: PROPERTIES, PROCESSING, PERFORMANCE, AND MILITARY APPLICATIONS. This handbook provides a summary of nylon technology and technical information for these important plastic materials.

MIL-HDBK-798, SYSTEM ENGINEER'S DESIGN FOR DISCARD HANDBOOK

Ident. Num:

MIL-HDBK-798

Rev. Num:

MIL-HDBK-798, SYSTEM ENGINEER'S DESIGN FOR DISCARD HANDBOOK. This handbook includes information on design for discard that is useful to the intended audience and is not otherwise conveiently available.

MIL-HDBK-799 (AR), DEPARTMENT OF DEFENSE HANDBOOK FIRE CONTROL SYSTEMS - GENERAL (5 APR 1996)

Ident. Num:

MIL-HDBK-799

Rev. Num:

MIL-HDBK-799 (AR), DEPARTMENT OF DEFENSE HANDBOOK FIRE CONTROL SYSTEMS - GENERAL (5 APR 1996)., This handbook was developed to provide guidance and general approaches to the develop- ment of ﬁre control systems. In particular, the handbook has been prepared to aid the designers of Army ﬁre control equipment and to serve as a reference guide for all military and civilian person- nel who may be interested in the design aspects of such materiel. The guidance in this handbook is based on the fundamental parameters of the ﬁre control problem and its solution. Primary emphasis is placed on the systematic approach required in the design of present-day ﬁre control equipment and systems. This approach involves thorough analysis of the particular ﬁre control problem at hand, establishment of the most suitable mathematical model, and computerization and mechanization of the mathematical model.

MIL-HDBK-799 (AR), DOD HANDBOOK FIRE CONTROL SYSTEMS - GENERAL

Ident. Num:

MIL-HDBK-799

Rev. Num:

MIL-HDBK-799 (AR), DOD HANDBOOK FIRE CONTROL SYSTEMS - GENERAL. This handbook was developed to provide guidance and general approaches to the development of fire control systems. In particular, the handbook has been prepared to aid the designers of Army fire control equipment and to serve as a reference guide for all military and civilian personnel who may be interested in the design aspects of such materiel. The guidance in this handbook is based on the fundamental parameters of the fire control problem and its solution. Primary emphasis is placed on the systematic approach required in the design of present-day fire control equipment and systems. This approach involves thorough analysis of the particular fire control problem at hand, establishment of the most suitable mathematical model, and computerization and mechanization of the mathematical model.