MIL-HDBK-300M, DOD HANDBOOK TECHNICAL INFORMATION FILE OF SUPPORT EQUIPMENT. This handbook is intended to provide the Department of Defense design, engineering, maintenance, training personnel and government contractors access to a data base, via hyperlink, (http://www.afmc-pub.wpafb.af.mil/HQ-AFMC/LG/lgi-page/lgis/MIL300/Milindex.htm) displaying DoD In-inventory Aerospace and Missile Support Equipment (SE). This data base will include a functional and technical description, associated technical orders, technical manuals, or commercial catalogues, relationship to similar equipment, end item(s) this support equipment is used on, and a simple line drawing. For government contractors, the handbook database is intended to provide sufficient information on an piece of support equipment so that it may be considered for a contemplated application. Use of this data system is intended to provide for maximum usage of in-inventory assets, and the elimination of duplicate design or development of support equipment for different weapon systems.

MIL-HDBK-303 (NOTICE 1), MILITARY STANDARDIZATION HANDBOOK MICRO-REPRODUCTION OF ENGINEERING DOCUMENTS. The following pages of MIL-HDBK-303 have been revised and supersede the pages listed.

MIL-HDBK-303 (NOTICE 2), MILITARY STANDARDIZATION HANDBOOK MICRO-REPRODUCTION OF ENGINEERING DOCUMENTS. MIL-HDBK-303, dated 15 September 1964, and Notice 1, dated 15 March 1971, are hereby canceled without replacement.

MIL-HDBK-303, MILITARY STANDARDIZATION HANDBOOK MICRO-REPRODUCTION OF ENGINEERING DOCUMENTS. This handbook contains information regarding preparation and techniques which affect the quality, legibility, permanence and the interchange capabilities between military activities of all engineering documents in the form of microfilms or the photographs and the reproductions thereof.

MIL-HDBK-304B (NOTICE 1), MILITARY HANDBOOK PACKAGE CUSHIONING DESIGN. The following revised pages of MIL-HDBK-304B supersede the pages listed.

MIL-HDBK-304B, MILITARY STANDARDIZATION HANDBOOK PACKAGE CUSHIONING DESIGN (31 OCT 1978). This document provides basic and fundamental information on cushioning materials and their uses. It will provide valuable information and guidance to engineering and technical personnel concerned with designing cushioning systems and specifying required cushioning for protecting fragile equipment. This handbook is not intended to be referenced in purchase specifications except for informational purposes, nor shall it supersede any specification requirements. Every effort has been made to reflect the latest information on the use of cushioning materials and designing cushioning systems for fragile equipment. It is the intent to review this handbook periodically to insure its completeness and currency.

MIL-HDBK-304C, DEPARTMENT OF DEFENSE HANDBOOK PACKAGE CUSHIONING DESIGN (1 JUN 1997).This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. The information in this handbook applies chiefly to conventional cushioning materials. These materials include polyurethane foam, foamed polystyrene, and foamed polyethylene.

MIL-HDBK-305 (NOTICE 1), MILITARY HANDBOOK ALLOY AND TEMPER DESIGNATION SYSTEM FOR MAGNESIUM BASE ALLOYS. MIL-HDBK-305, dated 18 July 1996, has been reviewed and determined to be valid for use in acquisition when needed.

MIL-HDBK-305, MILITARY HANDBOOK ALLOY AND TEMPER DESIGNATION SYSTEM FOR MAGNESIUM BASE ALLOYS (18 JUL 1996)., This standard establishes a uniform system for designating the alloying elements, the respective percentages of these elements, the serial letters, and the temper designations for magnesium base alloys.

MIL-HDBK-310, MILITARY HANDBOOK, GLOBAL CLIMATIC DATA FOR DEVELOPING MILITARY PRODUCTS (23 JUN 1997)., This handbook provides climatic data primarily for use in engineering analyses to develop and test military equipment and materiel. 1.1 Purpose. The data provided are intended to serve as natural environmental starting points for the sequence of engineering analyses to derive environmental design criteria for materiel. The climatic data are also intended toprovide guidance in the development of environmental tests of materiel.

MIL-HDBK-331D (NOTICE 1), MILITARY HANDBOOK DIRECTORY OF DOD ENGINEERING DATA REPOSITORIES. During the printing process of the 15 Aug 89 "D" version, the following error occurred (i.e., pages were omitted).

MIL-HDBK-331D, MILITARY HANDBOOK DIRECTORY OF DOD ENGINEERING DATA REPOSITORIES. The purpose of this handbook is to identify each service's primary repository organizational concept, type of data available, and address information (including DODAAC and EDRS control activity code).

MIL-HDBK-331E, MILITARY HANDBOOK DIRECTORY OF DOD ENGINEERING DATA REPOSITORIES. The purpose of this handbook is to identify each service's primary repository organizational concept, type of data available, and address information (including DODAAC and EDRS code).

MIL-HDBK-331F, MILITARY HANDBOOK DIRECTORY OF DOD ENGINEERING DATA REPOSITORIES. The purpose of this handbook is to identify the engineering data repository sites within each service.

MIL-HDBK-332, MILITARY STANDARDIZATION HANDBOOK , EVALUATION OF HIGH FREQUENCY ANTENNAS IN AN OPERATIONAL ENVIRONMENT.This document provides valuable information concerning maintenance evaluation procedures of the antenna-transmission line systems of High Frequency antennas. The handbook presents the results of evaluation-analysis of various test methods, procedures and test equipment used in several operational environments in the form of detailed test methods, procedures and test equipment. To enhance the use of these tests, applicable antenna and transmission line concepts, and the Smith Chart are discussed in detail. The application of these tests and procedures should be very beneficial in maintaining the required system performance particularly in cases where the antenna transmission line or other parts of the antenna system have been damaged.

MIL-HDBK-332(USAF) (NOTICE 1), EVALUATION OF HIGH FREQUENCY ANTENNAS IN AN OPERATIONAL ENVIRONMENT. MIL-HDBK-332(USAF), dated 14 December 1970, has been reviewed and determined to be current.

MIL-HDBK-334, MILITARY HANDBOOK, EVALUATION OF A CONTRACTOR'S SOFTWARE QUALITY ASSURANCE PROGRAM (15 JUL 1981)., When referenced in the item specification, contract, or order, this specification shall apply to the acquisition of software (computer programs and related data & documentation) where the acquisition involves either soft-ware alone or software as a portion of a system or subsystem.

MIL-HDBK-335(USAF) (NOTICE 1), MILITARY HANDBOOK MANAGEMENT AND DESIGN GUIDANCE ELECTROMAGNETIC RADIATION HARDNESS FOR AIR LAUNCHED ORDINANCE SYSTEMS. MIL-HDBK-335(USAF), dated 15 January 1981, has been reviewed and determined to be current.

MIL-HDBK-335(USAF) (NOTICE 2), MILITARY HANDBOOK MANAGEMENT AND DESIGN GUIDANCE ELECTROMAGNETIC RADIATION HARDNESS FOR AIR LAUNCHED ORDINANCE SYSTEMS. MIL-HDBK-335(USAF), dated 15 January 1981, has been reviewed and determined to be current.

MIL-HDBK-335(USAF) (NOTICE 3), MILITARY HANDBOOK MANAGEMENT AND DESIGN GUIDANCE ELECTROMAGNETIC RADIATION HARDNESS FOR AIR LAUNCHED ORDINANCE SYSTEMS. MIL-HDBK-335(USAF), date 15 January 1981, and any subsequent revisions or change notices are inactive for new design and shall no longer used as a guidance reference for new design.

MIL-HDBK-335(USAF), MILITARY HANDBOOK MANAGEMENT AND DESIGN GUIDANCE ELECTROMAGNETIC RADIATION HARDNESS FOR AIR LAUNCHED ORDINANCE SYSTEMS. The material in this handbook is intended to be applied during the development, design, production, and deployment of air launched ordinance systems. The material is designed to provide protection for air launched ordinance systems during that portion of the life cycle from the time the system is attached to the delivery aircraft until the system impacts a target. The EMR environments are considered to extend from 1MHz to 100 GHz.

MIL-HDBK-336-1 (NOTICE 1), MILITARY HANDBOOK SURVIVABILITY, AIRCRAFT, NONNUCLEAR, GENERAL CRITERIA (VOLUME 1) (30 SEP 1988)., MIL-HDBK-336_1 dated 25 October 1982, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-336-1, MILITARY HANDBOOK SURVIVABILITY, AIRCRAFT, NONNUCLEAR, GENERAL CRITERIA (VOLUME 1) (25 OCT 1982)., This is the first volume in a four-volume design handbook for nonnuclear survivability of military aircraft. Each volume is structured to be used in conjunction with the other three volumes, as needed, in the design process. This volume contains general information pertaining to vulnerability and survivability analysis techniques, weapon terminal effects, computer program descriptions, and basic subsystem design concepts. Volume 1 is arranged in a manner that allows the user to easily identify the specific information of interest. APPLICATION: The data contained in this design handbook have been arranged to support the development of both fixed and rotary wing military aircraft. Each has unique mission and performance characteristics that require specialized attention and design solutions. The subystem design categories have been established with these considerations in mind. For example, the power train and rotor blade subsystems deal primarily with military helicopter applications, while the launch/recovery systems deal with those subsystem elements for both fixed and rotary wing aircraft landing gear systems and for those systems related to the assisted takeoff (launching) and deceleration (recovery) methods most used by the Air Force and Navy fixed-wing aircraft.

MIL-HDBK-336-2 (NOTICE 1), MILITARY HANDBOOK SURVIVABILITY, AIRCRAFT, NONNUCLEAR, GENERAL CRITERIA (VOLUME 2) (30 SEP 1988)., MIL-HDBK-336_2 dated 21 September 1983, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-336-2, MILITARY HANDBOOK SURVIVABILITY, AIRCRAFT, NONNUCLEAR, GENERAL CRITERIA (VOLUME 2) (21 SEP 1983)., This is the first volume in a four-volume design handbook for nonnuclear survivability of military aircraft. Each volume is structured to be used in conjunction with the other three volumes, as needed, in the design process. This volume contains specific subsystem design concepts, procedures, and other pertinent information. The information and design guidance contained in this volume is arranged in a manner to enhance its use in the conceptual design process, system research, design, test, and evaluation (RDT&E) programs, and existing aircraft modification programs where nonnuclear survivability features are required. Specific information pertinent to each subsystem is contained therein. This volume is arranged to permit the designer or analyst to select the specific area or subject of concern in the design or modification of an aircraft system and find the candidate design methods that may be considered for use. Table 1-1 is a matrix of the general survivability enhancement methods and the subsystems associated with military aircraft. The general applicability of the listed methods, for each subsystem, is indicated by a dot in the matrix. This serves as a preliminary check list for the user to ensure that all potential candidate survivability enhancement methods are considered. The use of this chart is an essential step in the process of selecting the most effective combination of survival enhancement features for the given aircraft design concept. APPLICATION: The data contained in this design handbook have been arranged to support the development of both fixed and rotary wing military aircraft. Each has unique mission and performance characteristics that require specialized attention and design solutions. The subystem design categories have been established with these considerations in mind. For example, the power train and rotor blade subsystems deal primarily with military helicopter applications, while the launch/recovery systems deal with those subsystem elements for both fixed and rotary wing aircraft landing gear systems and for those systems related to the assisted takeoff (launching) and deceleration (recovery) methods most used by the Air Force and Navy fixed-wing aircraft.

MIL-HDBK-336-3 (NOTICE 1), MILITARY HANDBOOK SURVIVABILITY, AIRCRAFT, NONNUCLEAR, GENERAL CRITERIA (VOLUME 3) (30 SEP 1988)., MIL-HDBK-336-3 dated 4 February 1983, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-336-3, MILITARY HANDBOOK SURVIVABILITY, AIRCRAFT, NONNUCLEAR, GENERAL CRITERIA (VOLUME 3) (4 FEB 1983)., This is the first volume in a four-volume design handbook for nonnuclear survivability of military aircraft. Each volume is structured to be used in conjunction with the other three volumes, as needed, in the design process. The objective of Volume 3 is to provide a ready reference containing design information on military aircraft engine and propulsion system survivability. It contains data on design-techniques to reduce visual, infrared, radar, and aural detectability; and projectile and high-energy laser vulnerability of military aircraft engines and engine installations. The design techniques discussed ranged from combat- and test- proven systems, through development, laboratory, and breadboard equipment, to undeveloped concepts. Turbine engines are stressed, but piston engines are also presented. APPLICATION: The data contained in this design handbook have been arranged to support the development of both fixed and rotary wing military aircraft. Each has unique mission and performance characteristics that require specialized attention and design solutions. The subystem design categories have been established with these considerations in mind. For example, the power train and rotor blade subsystems deal primarily with military helicopter applications, while the launch/recovery systems deal with those subsystem elements for both fixed and rotary wing aircraft landing gear systems and for those systems related to the assisted takeoff (launching) and deceleration (recovery) methods most used by the Air Force and Navy fixed-wing aircraft.

MIL-HDBK-337, MILITARY STANDARDIZATION HANDBOOK ADHESIVE BONDED AEROSPACE STRUCTURE REPAIR. This handbook contains a description of standard methods for the repair of bonded-sandwich-and-metal-laminate-type aircraft construction. The items covered include prerepair damage evaluation, preparation of the part for repair, a description of the materials, and repair procedures. The repair methods designated in section 6.0 will cover the majority of small damage repair cases. These methods have been selected from those used in the current aircraft repair technical orders (T.O.'s). Large area repairs are covered in section 7.0. Postrepair inspection instruction is also included.

MIL-HDBK-338 (NOTICE 1), MILITARY HANDBOOK ELECTRONIC RELIABILITY DESIGN HANDBOOK. MIL-HNBK-338, VOL II OF II shall now include the statement "This handbook is for guidance only - do not cite this document as a requirement."

MIL-HDBK-338, MILITARY HANDBOOK ELECTRONIC RELIABILITY DESIGN HANDBOOK. This Handbook provides procuring activities and development contractors with an understanding of the concepts, principles, and methodologies covering all aspects of electronic systems reliability engineering and cost analysis as they relate to the design, acquisition, and deployment of DoD equipment/systems.

MIL-HDBK-338 (NOTICE 1), DOD HANDBOOK ELECTRONIC RELIABILITY DESIGN HANDBOOK. MIL-HDBK-338B, dated 1 October 1998, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-338B, MILITARY HANDBOOK ELECTRONIC RELIABILITY HANDBOOK. This handbook provides procuring activities and development contractors with an understanding of the concepts, principles, and methodologies covering all aspects of electronic systems reliability engineering and cost analysis as they relate to the design,acquisition and deployment of DoD equipment/systems.

MIL-HDBK-339(USAF) (NOTICE 1), MILITARY HANDBOOK CUSTOM LARGE SCALE INTEGRATED CIRCUIT DEVELOPMENT AND ACQUISITION FOR SPACE VEHICLES. MIL-HDBK-339(USAF), dated 31 Jul 84, has been reviewed and determined to be valid for use in aquisition.

MIL-HDBK-339(USAF), MILITARY HANDBOOK CUSTOM LARGE SCALE INTEGRATED CIRCUIT DEVELOPMENT AND ACQUISITION FOR SPACE VEHICLES. This handbook presents requirements for the management, design, and manufacturing control of custom monolithic large scale integrated circuits intended for use in high reliability space systems. In addition, this handbook presents the general requirements for the application or use of such devices in high reliability applications such as space systems and launch systems. This handbook is intended to provide the required guidance to ensure coordinated management of the design, development, application, procurement, control, and standardization of Custom Large Scale Integrated Circuits (CLSICs) in order to eliminate any failures of such devices and to reduce any problems in their acquisition.

MIL-HDBK-340 (USAF) (NOTICE 1), APPLICATION GUIDELINES FOR MIL–STD-1540B; TEST REQUIREMENTS FOR SPACE VEHICLES. The following pages of MIL-HDBK-340 (USAF) have been revised and supersede the pages listed.

MIL-HDBK-340(USAF), APPLICATION GUIDELINES FOR MIL-STD-1540B - TEST REQUIREMENTS FOR SPACE VEHICLES This handbook provides additional information pertaining to the test requirements of MIL-STD-1540B. The information is intended to aid in the formulation and review of the detailed test requirements for space vehicles including tailoring of MIL-STD-1540B requirements into specific program specifications or contracts.

MIL-HDBK-340 (usaf), APPLICATION GUIDELINES FOR MIL-STD-1540B, TEST REQUIREMENTS FOR SPACE VEHICLES. This handbook provides additional information pertaining to the test requirements of MIL-STD-1540B, "Test Requirements for Space Vehicles.” This handbook includes information Only on those test requirements for which additional explanations and guidance have been developed beyond that given in MIL-STD-1540B. Section 13 of this handbook provides an index and a cross reference from MIL-STD-1540B paragraph numbers to the corresponding paragraph numbers of this handbook. Further information and additional sections may be developed and added to the handbook in future revisions.

MIL-HDBK-340A (USAF), TEST REQUIREMENTS FOR LAUNCH, UPPER-STAGE, AND SPACE VEHICLES Vol I: Baselines. This handbook provides guidance for establishing uniform procedures for the control, determination, and documentation of product verification test requirements for launch, upper-stage, and space vehicles. 1.1 Purpose. Volume I of this handbook establishes environmental and structural ground test baselines for high priority launch vehicles, upper-stage vehicles, space vehicles, and for their sub-system and units. In addition, a uniform set of definitions of related terms is established. Volume II of this handbook addresses the tailoring of the testing baselines to meet the requirements of individual programs

MIL-HDBK-341 (NOTICE 1), DEPARTMENT OF DEFENSE HANDBOOK COATING, ALUMINUM, AND SILICON DIFFUSION, PROCESS FOR. MIL-HDBK-341(AT), dated 29 March 1988, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-341, DEPARTMENT OF DEFENSE HANDBOOK COATING, ALUMINUM, AND SILICON DIFFUSION, PROCESS FOR. PURPOSE: This is one of the coating processes used to provide a coating on certain metallic parts to protect them against oxidation, sulfidation or erosion at high temperature operation, and resistance to thermal shock during cycling. SCOPE: This standard covers the procedure for applying aluminum and silicon by the diffusion coating process.

MIL-HDBK-343, MILITARY HANDBOOK DESIGN, CONSTRUCTION, AND TESTING REQUIREMENTS FOR ONE OF A KIND SPACE EQUIPMENT. This handbook provides definitions of various classes of space programs and of various classes or space equipment. The handbook also provides detailed technical requirements for the design, construction, and testing of various classes of space equipment.

MIL-HDBK-344A, MILITARY HANDBOOK ENVIRONMENTAL STRESS SCREENING (ESS) OF ELECTRONIC EQUIPMENT. This handbook provides uniform procedures, methods and techniques for planning, monitoring and controlling the cost effectiveness of ESS programs for electronic equipment.

MIL-HDBK-344A, MILITARY HANDBOOK ENVIRONMENTAL STRESS SCREENING (ESS) OF ELECTRONIC EQUIPMENT. This handbook provides uniform procedures, methods and techniques for planning, monitoring and controlling the cost effectiveness of ESS programs for electronic equipment. It is intended to support the requirements of MIL-STD-785, Task 301, "Environmental Stress Screening" and/or MIL-STD-781, Task 401, "Environmental Stress Screening" and to implement Air Force R&M 2000 ESS recommendations and guidelines.

MIL-HDBK-347, MILITARY HANDBOOK MISSION-CRITICAL COMPUTER RESOURCES SOFTWARE SUPPORT. This handbook presents software support concepts, procedures, and guidance to all managers responsible for Mission-Critical Computer Resources (MCCR) development or support.

MIL-HDBK-348(USAF) (NOTICE 1), SATELLITE CONTROL NETWORK HARDWARE AND SOFTWARE OPERATIONAL ACCEPTANCE PROCESS. This document establishes the baseline for the site technical acceptance, and the procedures for turnover to site operations, of ground equipment and associated computer software in the Air Force Satellite Control Network (AFSCN). This includes transitioning modifications or upgrades of the existing resources to operational capability and the transfer of operations and maintenance responsibility from the implementing to the operating agencies. Status codes are established and defined for standardized progress reporting of hardware modifications or installations and the associated documentation. This handbook also contains definitions applicable to the satellite control network.

MIL-HDBK-348(USAF), SATELLITE CONTROL NETWORK HARDWARE AND SOFTWARE OPERATIONAL ACCEPTANCE PROCESS. This document establishes the baseline for the site technical acceptance, and the procedures for turnover to site operations, of ground equipment and associated computer software in the Air Force Satellite Control Network (AFSCN). This includes transitioning modifications or upgrades of the existing resources to operational capability and the transfer of operations and maintenance responsibility from the implementing to the operating agencies. Status codes are established and defined for standardized progress reporting of hardware modifications or installations and the associated documentation. This handbook also contains definitions applicable to the satellite control network.

MIL-HDBK-349, MANUFACTURE AND INSPECTION OF ADHESIVE BONDED, ALUMINUM HONEYCOMB SANDWICH ASSEMBLIES FOR AIRCRAFT. This handbook presents information on the manufacture and inspection of adhesive bonded, aluminum honeycomb sandwich assemblies for aircraft.

MIL-HDBK-350, MILITARY HANDBOOK A GUIDE FOR MIL-STD-1520 CORRECTIVE ACTION AN DISPOSITION SYSTEM FOR NONCONFORMING MATERIAL (7 JUN 1991)., This standard sets forth the requirements for a cost-effective corrective action and disposition system for non-conforming material.

MIL-HDBK-353, MILITARY HANDBOOK PLANNING AND COMMISSIONING WASTEWATER TREATMENT PLANTS. This handbook serves as a planning guide for commissioning wastewater treatment plants (WWTPs). Adequate planning prevents unnecessary construction delays and costly modifications and ensures efficient plant operation.

MIL-HDBK-400, MILITARY HANDBOOK CRITERIA FOR PREPARATION OF GEAR AND SPLINE ENGINEERING DRAWINGS. The following pages of MIL-HDBK-400 have been revised and supersede the pages listed.

MIL-HDBK-400, MILITARY HANDBOOK CRITERIA FOR PREPARATION OF GEAR AND SPLINE ENGINEERING DRAWINGS. This handbook covers parallel, intersecting, and nonintersecting axes gears, whose respective pitch surfaces of revolution are cylinders, cones and hyperboloida. It limits its coverage of splines to involute, parallel sided and straight nonparallel sided tooth forms. It does not attempt to cover either helical or tapered splines. Coverage of gear and spline types is, however, broad enough to permit adequate specification of special gear and spline configurations by supplementing or modifying comparable types within the scope of this handbook.

MIL-HDBK-402A (NOTICE 1), MILITARY HANDBOOK GUIDELINES FOR THE IMPLEMENTATION OF THE DoD PARTS CONTROL PROGRAM (21 AUG 2001) [SUPERSEDING MIL-STD-40000] [S/S BY MIL-HDBK-402A & SD-19]. MIL-HDBK-402A, dated 14 May 1993, is hereby canceled. For future guidance, please refer to MIL-HDBK-512, “Parts Management” and SD-19, “Life Cycle Cost Savings Through Parts Management”.

MIL-HDBK-402A, MILITARY HANDBOOK GUIDELINES FOR THE IMPLEMENTATION OF THE DoD PARTS CONTROL PROGRAM (14 MAY 1993) [SUPERSEDING MIL-STD-40000] [S/S BY MIL-HDBK-402A & SD-19]., This handbook is to be used by the Government components in applying the PCP to "contracts for major weapon systems, end-items of equipment where logistics support is required, and in which acquisition managers foresee appreciable life cycle cost savings". It will be used to identify the various conditions and elements that should be considered for tailoring and applying MIL-STD-965 (Ref. 2) requirements to specific aquisitions.

MIL-HDBK-404 (NOTICE 1), MILITARY HANDBOOK CALCULATION AND DESIGN OF MASTER GEARS (12 APR 2004)., MIL-HDBK-404, dated 12 June 1990, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-404, MILITARY HANDBOOK CALCULATION AND DESIGN OF MASTER GEARS (12 JUN 1990). This handbook includes the instructions for the design, development, and calculation and for specifying requirements of master gears for the functional inspection of external and internal, spur and helical, parallel and askew axis, involute profile gears. Materials pertinent to the inspection of bevel and worm gears and related inspection equipment are also covered.

MIL-HDBK-405, MILITARY HANDBOOK TRAILERS AND SEMITRAILERS, TACTICAL (MILITARY) DESIGN CHARACTERISTICS OF (15 JAN 1975) (NO S/S DOCUMENT). MIL-HDBK-405, dated 3 July 1963, is hereby cancelled. There is no superseding document.

MIL-HDBK-406 (NOTICE 1), MILITARY STANDARDIZATION, CONTAMINATION CONTROL TECHNOLOGY CLEANING MATERIALS FOR PRECISION PRECLEANING AND USE IN CLEAN ROOMS AND CLEAN WORK STATIONS. MIL-HDBK-406, dated 31 October 1971, has been reviewed and determined to be current.

MIL-HDBK-406 (NOTICE 2), MILITARY STANDARDIZATION, CONTAMINATION CONTROL TECHNOLOGY CLEANING MATERIALS FOR PRECISION PRECLEANING AND USE IN CLEAN ROOMS AND CLEAN WORK STATIONS. To all holders of MIL-HDBK-406: Make the following pen and ink changes.

MIL-HDBK-406, MILITARY STANDARDIZATION HDBK, CONTAMINATION CONTROL TECHNOLOGY CLEANING MATERIALS FOR PRECISION PRECLEANING AND USE IN CLEAN ROOMS AND CLEAN WORK STATIONS. This Handbook serves as a guide and establishes the minimum requirements for selection, storage and capability considerations of cleaning agents for use in Clean Rooms and Clean Work Stations and Controlled Environmental Facilities.

MIL-HDBK-407, MILITARY STANDARDIZATION HANDBOOK CONTAMINATION CONTROL TECHNOLOGY PRECISION CLEANING METHODS AND PROCEDURES. The purpose of this program is to delineate requirements to that extent necessary to establish general data for operational and performance characteristics essential to developing an adequate documents support structure suitable for use in contamination control technology.

MIL-HDBK-408, MILITARY HANDBOOK CONTAMINATION CONTROL TECHNOLOGY MICROBIAL DETERIORATION IN ELECTRONICS ITS ORIGIN AND CONTROL (24 OCT 1994) (NO S/S DOCUMENT)., MIL-HDBK-480, dated 19 January 1972, is hereby cancelled without replacement.

MIL-HDBK-410 (NOTICE 1), MILITARY STANDARDIZATION HANDBOOK CONTAMINATION CONTROL TECHNOLOGY LOGISTIC PROTECTION OF PRECISION CLEANED MATERIEL. Military Handbook 410, dated 15 October 1973, has been reviewed and determined to be current.

MIL-HDBK-410 (NOTICE 2), MILITARY STANDARDIZATION HANDBOOK CONTAMINATION CONTROL TECHNOLOGY LOGISTIC PROTECTION OF PRECISION CLEANED MATERIEL. Military Handbook 410, dated 15 October 1973, is hereby canceled without replacement.

MIL-HDBK-410, MILITARY STANDARDIZATION HANDBOOK CONTAMINATION CONTROL TECHNOLOGY LOGISTIC PROTECTION OF PRECISION CLEANED MATERIEL. This handbook is a compilation of data on contamination control technology and covers the criteria necessary for establishing general data on operational and performance characteristics of precision packaging materials and procedures.

MIL-HDBK-411B (NOTICE 1), MILITARY HANDBOOK POWER AND THE ENVIRONMENT FOR SENSITIVE DoD ELECTRONIC EQUIPMENT (GENERAL) VOLUME 1. MIL-HDBK-411B, dated 15 May 1990, has been reviewed and determined to be valid for use in aquisition.

MIL-HDBK-411B, MILITARY HANDBOOK POWER AND THE ENVIRONMENT FOR SENSITIVE DoD ELECTRONIC EQUIPMENT (GENERAL) VOLUME 1. This three-volume handbook is a reference for the planning and engineering of power and the environmental control systems for fixed Department of Defense (DoD) communications, data processing, and information systems facilities.

MIL-HDBK-412 (NOTICE 1), MILITARY HANDBOOK AND FACILITY DESIGN HANDBOOK FOR SATELLITE EARTH STATIONS. MIL-HDBK-412, dated 20 May 1981, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-412, MILITARY HANDBOOK AND FACILITY DESIGN HANDBOOK FOR SATELLITE EARTH STATIONS. This handbook presents selected topics in earth station facility engineering to telecommunications engineers, managers, and senior operations and maintenance (O&M) personnel. These topics cover the site selection process and the design of site facilities (including physical structures and the electrical power and ground systems).

MIL-HDBK-413, MILITARY HANDBOOK DESIGN HANDBOOK FOR HIGH FREQUENCY RADIO COMMUNICATIONS SYSTEMS. This handbook provides uniform guidelines for communications engineers and staff planners for the implementation of high frequency (HF) radio communications systems. This handbook provides general technical information pertaining to facility and system design of manpack, vehicular, transportable, and fixed station high frequency radio communications systems, receiving and transmitting sites, and antenna installations.

MIL-HDBK-413, MILITARY HANDBOOK DESIGN HANDBOOK FOR HIGH FREQUENCY RADIO COMMUNICATIONS SYSTEMS. MIL-HDBK-413, dated 28 March 1986, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-414, MILITARY HANDBOOK, TECHNICAL CONTROL FACILITIES AND EQUIPMENT FOR LONG HAUL COMMUNICATIONS VOLUME 1 OF 2 VOLUMES (23 MAR 1981)., This handbook provides pertinent information regarding the application and electrical characteristics of equipment employed in Technical Control or Patch and Test Facilites in the Defense Communication System.

MIL-HDBK-415, MILITARY HANDBOOK DESIGN HANDBOOK FOR FIBER OPTIC COMMUNICATIONS SYSTEMS. This handbook provides engineers and other communications personnel with standard guidelines for use in planning and engineering fiber optic communications systems.

MIL-HDBK-415A (NOTICE 1), MILITARY HANDBOOK DESIGN HANDBOOK FOR FIBER OPTIC COMMUNICATIONS SYSTEMS. MIL-HDBK-415A, dated 17 October 1994, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-415A, MILITARY HANDBOOK DESIGN HANDBOOK FOR FIBER OPTIC COMMUNICATIONS SYSTEMS. The purpose of this handbook is to provide uniform Department of Defense (DoD) guidelines for communication engineers, and installation, operation, and maintenance personnel working with fiber optic communication systems.

MIL-HDBK-416 (NOTICE 1), MILITARY HANDBOOK, DESIGN HANDBOOK FOR LINE OF SIGHT (LOS) MICROWAVE COMMUNICATION SYSTEMS (15 JUL 1999)., MIL-HDBK-416, dated 15 November 1977, is hereby canceled without replacement.

MIL-HDBK-416, MILITARY HANDBOOK, DESIGN HANDBOOK FOR LINE OF SIGHT (LOS) MICROWAVE COMMUNICATION SYSTEMS (15 NOV 1977)., This handbook for line-of-site (LOS) radio systems include techniques and procedures necessary for communications engineers to design systems utilizing state-of-the-art principles existing now.

MIL-HDBK-417 (NOTICE 1), MILITARY HANDBOOK FACILITY DESIGN FOR TROPOPHERIC SCATTER (TRANSHORIZON MICROWAVE SYSTEM DESIGN). MIL-HDBK-417, dated 25 November 1977, is hereby canceled without replacement.

MIL-HDBK-417, MILITARY HANDBOOK FACILITY DESIGN FOR TROPOPHERIC SCATTER (TRANSHORIZON MICROWAVE SYSTEM DESIGN). This handbook for transhorizon radio systems includes techniques and procedures necessary for communications engineers to design systems utilizing state-of-the-art principles existing now.

MIL-HDBK-419A, MILITARY HANDBOOK GROUNDING, BONDING, AND SHIELDING FOR ELECTRONIC EQUIPMENTS AND FACILITIES (VOL I OF 2 VOLUMES) BASIC THEORY (28 DEC 87). This handbook emphasizes the necessity for including considerations of grounding, bonding, and shielding in all phases of design, construction, operation, and maintenance of electronic equipment and facilities. Volume I, Basic Theory, develops the principles of personnel protection, fault protection, lightning protection, interference reduction, and EMP protection for C-E facilities. In addition, the basic theories of earth connections, signal grounding, electromagnetic shielding, and electrical bonding are presented. The subjects are not covered independently, rather they are considered from the standpoint of how they influence the design of the earth electrode subsystem of a facility, the selection of ground reference networks for equipments and structures, shielding requirements, facility and equipment bonding practices, etc. Volume I also provides the basic background of theory and principles that explain the technical basis for the recommended practices and procedures; illustrates the necessity for care and thoroughness in implementation of grounding, bonding, and shielding, and provides supplemental information to assist in the solution of those problems and situations not specifically addressed. In Volume II, Applications, the principles and theories, including RED/BLACK protection, are reduced to the practical steps and procedures which are to be followed in structural and facility development, electronic engineering, and in equipment development. These applications should assure personnel, equipment and structural safety, minimize electromagnetic interference (EMI) problems in the final operating system; and minimize susceptibility to and generation of undesirable emanations. The emphasis in Volume11 goes beyond development to assembly and construction, to installation and checkout, and to maintenance for long term use.

MIL-HDBK-419A, MILITARY HANDBOOK GROUNDING, BONDING, AND SHIELDING FOR ELECTRONIC EQUIPMENTS AND FACILITIES (VOL II OF 2 VOLUMES) APPLICATIONS (29 DEC 87). This handbook emphasizes the necessity for including considerations of grounding, bonding, and shielding in all phases of design, construction, operation, and maintenance of electronic equipment and facilities. Volume I, Basic Theory, develops the principles of personnel protection, fault protection, lightning protection, interference reduction, and EMP protection for C-E facilities. In addition, the basic theories of earth connections, signal grounding, electromagnetic shielding, and electrical bonding are presented. The subjects are not covered independently, rather they are considered from the standpoint of how they influence the design of the earth electrode subsystem of a facility, the selection of ground reference networks for equipments and structures, shielding requirements, facility and equipment bonding practices, etc. Volume I also provides the basic background of theory and principles that explain the technical basis for the recommended practices and procedures; illustrates the necessity for care and thoroughness in implementation of grounding, bonding, and shielding, and provides supplemental information to assist in the solution of those problems and situations not specifically addressed. In Volume II, Applications, the principles and theories, including RED/BLACK protection, are reduced to the practical steps and procedures which are to be followed in structural and facility development, electronic engineering, and in equipment development. These applications should assure personnel, equipment and structural safety, minimize electromagnetic interference (EMI) problems in the final operating system; and minimize susceptibility to and generation of undesirable emanations. The emphasis in Volume11 goes beyond development to assembly and construction, to installation and checkout, and to maintenance for long term use.

MIL-HDBK-420 (NOTICE 1), SITE SURVEY HANDBOOK FOR COMMUNICATIONS FACILITIES. MIL-HDBK-420, dated 20 March 1987, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-420, SITE SURVEY HANDBOOK FOR COMMUNICATIONS FACILITIES. This handbook describes the responsibilities and suggests procedures for conducting site surveys, used in conjunction with site-specific handbooks and other applicable documents to identify requirements needed to support the acquisition, establishment, or upgrading of telecommunications sites.

MIL-HDBK-421 (NOTICE 1), MILITARY HANDBOOK COMMUNICATIONS TIMING AND SYNCRONIZATION SUBSYSTEMS. MIL-HDBK-421, dated 17 May 1991, has been reviewed and determined to be valid for use in acquistion.

MIL-HDBK-421, MILITARY HANDBOOK COMMUNICATIONS TIMING AND SYNCHRONIZATION SUBSYSTEMS. This handbook has been prepared to assist engineers and staff planners in understanding military communications timing and synchronization characteristics found in the timing and synchronization needs of the military communications environment.

MIL-HDBK-423, HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR FIXED AND TRANSPORTABLE GROUND - BASED C4I FACILITIES - VOLUME 1 - FIXED FACILITIES (15 MAY 1993)., The two-volume MIL-HDBK-423 handbook set provides information to managers and engineers responsible for the design, construction, testing, and hardness maintenance/hardness surveillance of fixed and transportable ground-based facilities that must be hardened against the high altitude electromagnetic pulse (HEMP). The primary purpose of this Volume I is to provide detailed guidance to implement HEMP protection of fixed facilities in accordance with requirements of MIL-STD-188-125, "High Altitude Electromagnetic Pulse (HEMP) Protection for Ground-Based C4I Facilities Performing Critical, Time Urgent Missions." Volume II provides similar guidance for ground-mobile and transportable facilities. - THIS IS A CONTROLLED DISTRIBUTION DOCUMENT AND NOT IN THE PUBLIC DOMAIN -

MIL-HDBK-454 (NOTICE 1), DOD HANDBOOK GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT (28 MAY 1997). TO ALL HOLDERS OF MIL-HDBK-454: 1. THE FOLLOWING PAGES OF MIL-HDBK-454, DATED 28 APRIL 1995, HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

MIL-HDBK-454, MILITARY HANDBOOK, GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT (28 APR 1995)., This handbook covers the common guidelines to be used military specifications for electronic equipment.

MIL-HDBK-454A, DEPARTMENT OF DEFENSE HANDBOOK, GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT (3 NOV 2000) [SUPERSEDING MIL-STD-454N]., This handbook provides guidance and lessons learned in the selection of documentation for the design of electronic equipment.

MIL-HDBK-454B, DEPARTMENT OF DEFENSE HANDBOOK, GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT (15 APR 2007) [SUPERSEDING MIL-HDBK-454A AND MIL-STD-454N]., This handbook is the technical baseline for the design and construction of electronic equipment for the Department of Defense. It captures in one document, under suitable subject heading, fundamental design guidelines for multiple general electronic specifications. The opportunity to focus on a single document, afforded to contractors, results in substantial savings to the Government. This handbook was prepared by, and is regularly updated through, the cooperative efforts of Government and industry. The documents listed below are not necessarily all of the documents referenced herein, but are those needed to understand the information provided by this handbook. (i) DOD-E-8983 Electronic Equipment, Aerospace, Extended Space Environment, General Specification for.; (ii) MIL-F-18870 Fire Control Equipment, Naval Ship and Shore, General Specification for.; (iii) MIL-PRF-28800 Test Equipment for Use with Electrical and Electronic Equipment, General Specification for.; and (iv) MIL-HDBK-2036 Electronic Equipment Specifications, Preparation of.

MIL-HDBK-470A, MILITARY HANDBOOK, DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS (4 AUG 1997)., This document provides information to help the reader view maintainability in the context of an overall systems engineering effort.