MIL-HDBK-201B, MILITARY STANDARDIZATION HANDBOOK PETROLEUM OPERATIONS

MIL-HDBK-201B, MILITARY STANDARDIZATION HANDBOOK PETROLEUM OPERATIONS. This handbook is designed to provide general standards, procedures, and principles for the operations and operational maintenance of military petroleum facilities.

MIL-HDBK-203C, MILITARY STANDARDIZATION HANDBOOK, MANUFACTUER'S SYMBOLS AND DESIGNATIONS FOR ANTI-FRICTION BEARINGS

MIL-HDBK-203C, MILITARY STANDARDIZATION HANDBOOK, MANUFACTUER'S SYMBOLS AND DESIGNATIONS FOR ANTI-FRICTION BEARINGS

MIL-HDBK-204A (AR), DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS

MIL-HDBK-204A (AR), DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS.

MIL-HDBK-205A, MILITARY HANDBOOK PHOSPHATE COATINGS AND BLACK OXIDE COATINGS OF FERROUS METALS (15 JUL 1985)

MIL-HDBK-205A, MILITARY HANDBOOK PHOSPHATE COATINGS AND BLACK OXIDE COATINGS OF FERROUS METALS (15 JUL 1985). This handbook provides a working knowledge of phosphate and black oxide coatings of ferrous metals as used by the DoD for equipment and ordance.

MIL-HDBK-210A, MILITARY STANDARDIZATION HANDBOOK, CONVERSION FACTORS AND LOGISTICS DATA FOR PETROLEUM PLANNING

MIL-HDBK-210A, MILITARY STANDARDIZATION HANDBOOK, CONVERSION FACTORS AND LOGISTICS DATA FOR PETROLEUM PLANNING. This document provides a compilation of commonly used conversion factors, and data on characteristics of petroleum products.

MIL-HDBK-212 (NOTICE 1), GASKET MATERIALS (NON-METALLIC)

MIL-HDBK-212 (NOTICE 1), GASKET MATERIALS (NON-METALLIC). MIL-HDBK-212, Gasket Materials (non-metallic), adopted on 28 September 1958, has been reviewed and determined to be current.

MIL-HDBK-212, MILITARY HANDBOOK, GASKET MATERIALS (NONMETALLIC)

MIL-HDBK-212, MILITARY HANDBOOK, GASKET MATERIALS (NONMETALLIC). The primary objective of this handbook is to provide in a condensed form information of direct usefulness to interested military personnel. Although the handbook is general only, and is not applicable to aircraft practice, the data have been selected from a large number of industrial and government publications and have been checked for suitability for use in design.

MIL-HDBK-216 (NOTICE 11), MILITARY HANDBOOK R. F. TRANSMISSION LINES AND FITTINGS

MIL-HDBK-216 (NOTICE 11), MILITARY HANDBOOK R. F. TRANSMISSION LINES AND FITTINGS. MIL-HDBK-216, dated 4 January 1962, is hereby canceled without replacement.

MIL-HDBK-216, W/ NOTICES 1-010, RF TRANSMISSION LINES AND FITTINGS

MIL-HDBK-216, RF TRANSMISSION LINES AND FITTINGS. This handbook provides pertinent information on RF transmission lines and fittings, important assembly techniques, and necessary fabriction precautions to insure optimum operational results and to minimize the probability of failures.

MIL-HDBK-217E, MILITARY HANDBOOK RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT (27 OCT 1986)

MIL-HDBK-217E, MILITARY HANDBOOK RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT (27 OCT 1986)., The purpose of this handbook is to establish and maintain consistant and uniform methods for estimating the inherent reliability (i.e., the reliability of a mature design) of military electronic equipment and systems. It provides a common basis for reliability predictions during acquisition programs for military electronic systems and equipment. It also establishes a common basis for comparing and evaluating reliability predictions of related or competitive designs. The handbook is intended to be used as a tool to increase the reliability of the equipment being designed.

MIL-HDBK-217F (NOTICE 1), MILITARY HANDBOOK RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT (10 JUL 1992)

MIL-HDBK-217F (NOTICE 1), MILITARY HANDBOOK RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT (10 JUL 1992). The following pages of MIL-STD-217F have been revised and supersede the pages....

MIL-HDBK-217F (NOTICE 2), MILITARY HANDBOOK RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT (28 FEB 1995)

MIL-HDBK-217F (NOTICE 2), MILITARY HANDBOOK RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT (28 FEB 1995). The following pages of MIL-STD-217F have been revised and supersede the pages....

MIL-HDBK-218 (NOTICE 1), MILITARY STANDARDIZATION HANDBOOK APPLICATIONS OF ELECTRICAL RESOLVERS

MIL-HDBK-218 (NOTICE 1), MILITARY STANDARDIZATION HANDBOOK APPLICATIONS OF ELECTRICAL RESOLVERS. MIL-HDBK-218, dated 1 June 1962, has been reviewed and determined to be valid for use in acquisition.

MIL-HDBK-218 (NOTICE 2), MILITARY STANDARDIZATION HANDBOOK APPLICATIONS OF ELECTRICAL RESOLVERS

MIL-HDBK-218 (NOTICE 2), MILITARY STANDARDIZATION HANDBOOK APPLICATIONS OF ELECTRICAL RESOLVERS. MIL-HDBK-218, dated 1 June 1962, is hereby canceled without replacement.

MIL-HDBK-218 (TM 700-5990-1), MILITARY STANDARDIZATION HANDBOOK APPLICATIONS OF ELECTRICAL RESOLVERS.

MIL-HDBK-218 (TM 700-5990-1), MILITARY STANDARDIZATION HANDBOOK APPLICATIONS OF ELECTRICAL RESOLVERS. This Handbook contains reference data concerning the application of precision electrical resolvers and is intended for use by engineers and designers.

MIL-HDBK-220B, MILITARY HANDBOOK GLOSSARY OF TRAINING DEVICE TERMS.

MIL-HDBK-220B, MILITARY HANDBOOK GLOSSARY OF TRAINING DEVICE TERMS. This document provides uniform terminology peculier to the general field of training devices.

MIL-HDBK-221 (WP), AIRCRAFT FIRE PROTECTION HANDBOOK

MIL-HDBK-221 (WP), AIRCRAFT FIRE PROTECTION HANDBOOK. This handbook embodies requirements and design objectives for fire protection for all types of manned Naval aircraft (including helicopters) with turbine engines.

MIL-HDBK-223, MILITARY STANDARDIZATION HDBK CODED LIST OF MATERIALS

MIL-HDBK-223, MILITARY STANDARDIZATION HDBK CODED LIST OF MATERIALS. The primary purpose of this handbook is to provide a uniform basis with respect to type of material, form, shape, and unit of measure in the computation and submission of materials requirements which will be requested by separate instructions as needed.

MIL-HDBK-224 (NAVY), MILITARY STANDARDIZATION HANDBOOK, PRECISION COMPONENTS

MIL-HDBK-224 (NAVY), MILITARY STANDARDIZATION HANDBOOK, PRECISION COMPONENTS. This handbook provides the engineer with technical reference data on precision components for new design, and on components required for maintenance of existing equipment.

MIL-HDBK-225A, MILITARY HANDBOOK, SYNCHROS DESCRIPTION AND OPERATION

MIL-HDBK-225A, MILITARY HANDBOOK, SYNCHROS DESCRIPTION AND OPERATION. This handbook is intended as a guide for use by military personnel concerned with the use, interchangibility, maintenance, and repair of synchros, and the design of weapons systems.

MIL-HDBK-227A (SHIPS), MILITARY STANDARDIZATION HANDBOOK SELECTION AND INSTALLATION OF REGULATING AND CONTROL VALVES FOR NAVAL SHIPBOARD USE

MIL-HDBK-227A (SHIPS), MILITARY STANDARDIZATION HANDBOOK SELECTION AND INSTALLATION OF REGULATING AND CONTROL VALVES FOR NAVAL SHIPBOARD USE. This handbook provides criteria for the selection and installation of regulating and control valves for Naval shipboard use.

MIL-HDBK-228A (AS), MILITARY STANDARDIZATION HANDBOOK, PRESURE SENSITIE ADHESIVE, SOLVENT ACTIVATED & MISCELLANEOUS TAPES

MIL-HDBK-228A (AS), MILITARY STANDARDIZATION HANDBOOK, PRESURE SENSITIE ADHESIVE, SOLVENT ACTIVATED AND MISCELLANEOUS TAPES.

MIL-HDBK-231A, MILITARY HANDBOOK ENCODERS SHAFT ANGLE TO DIGITAL

MIL-HDBK-231A, MILITARY HANDBOOK ENCODERS SHAFT ANGLE TO DIGITAL. This handbook describes the operation of contact and non- contact (formerly brush and brushless) shaft-position, analog-to-digital encoders. It contains physical descriptions and illustrations of encoders, techniques used, theory of operation, background information on binary codes, coding principles and limitation, definitions of encoder terminology, and other criteria for selecting an encoder including identification and marking of encoders for military use.

MIL-HDBK-232A, MILITARY STANDARD RED/BLACK ENGINEERING INSTALLATION GUIDELINES

MIL-HDBK-232A, MILITARY STANDARD RED/BLACK ENGINEERING INSTALLATION GUIDELINES.

MIL-HDBK-235-1B, EM (RADIATED) ENVIRONMENT CONSIDERATIONS FOR DESIGN AND PROCUREMENT OF ELECTRICAL AND ELECTRONIC EQUIPMENT, SUBSYSTEMS, AND SYSTEMS

MIL-HDBK-235-1B (PART-1B), EM (RADIATED) ENVIRONMENT CONSIDERATIONS FOR DESIGN AND PROCUREMENT OF ELECTRICAL AND ELECTRONIC EQUIPMENT, SUBSYSTEMS, AND SYSTEMS. The intent of this handbook is to provide and establish a unifonn approach for the protection of military electronics from the adverse effects of the electromagnetic environment. The handbook is applicable to any electrical and electronic equipment, subsystem or system which may be exposed to an electromagnetic environment during its life cycle.

MIL-HDBK-236T, MILITARY STANDARDIZATION HDBK, INDEX TO STANDARDS FOR PALLETIZING, TRUCK LOADING, RAILCAR LOADING & CONTAINER LOADING OF HAZARDOUS MATL

MIL-HDBK-236T, MILITARY STANDARDIZATION HDBK, INDEX TO STANDARDS FOR PALLETIZING, TRUCK LOADING, RAILCAR LOADING AND CONTAINER LOADING OF HAZARDOUS MATERIALS

MIL-HDBK-237A, MILITARY HANDBOOK, ELECTROMAGNETIC COMPATIBILITY GUIDE FOR PLATFORMS, SYSTEMS, AND EQUIPMENT

MIL-HDBK-237A, MILITARY HANDBOOK, ELECTROMAGNETIC COMPATIBILITY GUIDE FOR PLATFORMS, SYSTEMS, AND EQUIPMENT

MIL-HDBK-237B, DOD HDBK GUIDANCE FOR CONTROLLING ELECTROMAGNETIC ENVIRONMENTAL EFFECTS ON PLATFORMS, SYSTEMS, AND EQUIPMENT

MIL-HDBK-237B, DOD HDBK GUIDANCE FOR CONTROLLING ELECTROMAGNETIC ENVIRONMENTAL EFFECTS ON PLATFORMS, SYSTEMS, AND EQUIPMENT. This handbook is intended to provide personnel responsible for the design, development, and acquisition of DoD platforms, systems, subsystems, equipment, and devices with the guidance necessary for achieving the desired level of electromagnetic compatibility (EMC). This handbook describes the tasks that should be accomplished to ensure electromagnetic environmental effects (E3) control/EMC measures are incorporated into the development and operational procedures of an item to achieve the desired level of EMC during its life cycle. This handbook may also be used by program managers (PMs) to identify the critical E3 issues that need to be addressed when preparing their required Program Status Reports.

MIL-HDBK-237C, ELECTROMAGNETIC ENVIRONMENTAL EFFECTS AND SPECTRUM CERTIFICATION GUIDANCE FOR THE ACQUISITION PROCESS

MIL-HDBK-237C, ELECTROMAGNETIC ENVIRONMENTAL EFFECTS AND SPECTRUM CERTIFICATION GUIDANCE FOR THE ACQUISITION PROCESS. This handbook provides acquisition personnel responsible for the design, development, and procurement of Department of Defense (DoD) platforms/systems and subsystems/equipment with the guidance necessary for achieving the desired level of electromagnetic (EM) compatibility (EMC). This handbook describes the tasks that should be accomplished to ensure electromagnetic environmental effects (E3) control and spectrum certification (SC) procedures are addressed during the item’s acquisition life cycle. This handbook is consistent with the policies and procedures of DoD Directives (DoDD) 5000.1, 3222.3, and 4650.1, DoD Instruction (DoDI) 5000.2, and DoD Regulation (DoDR) 5000.2-R. Provisions of this handbook should be used by research, development and acquisition activities, at appropriate times during the life cycle of any item which emits or which can be susceptible to electromagnetic energy either through intentional antennas or through other electromagnetic coupling mechanisms. Essentially, all electronics items and many electrical items fall into this classification. For example, the handbook may be used: - During acquisition to assure visibility, accountability, and controllability of the E3/SC effort, as well as its integration into the overall program, or - During the design process to assure management awareness and cost effective tailoring of applicable E3 performance requirements and interface standards. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-HDBK-237D, ELECTROMAGNETIC ENVIRONMENTAL EFFECTS AND SPECTRUM SUPPORTABILITY GUIDANCE FOR THE ACQUISITION PROCESS (20 MAY 2005)

MIL-HDBK-237D, ELECTROMAGNETIC ENVIRONMENTAL EFFECTS AND SPECTRUM SUPPORTABILITY GUIDANCE FOR THE ACQUISITION PROCESS (20 MAY 2005). This handbook provides guidance for establishing and implementing effective electromagnetic environmental effects (E3) control and spectrum supportability (SS) for the design, development, and procurement of Department of Defense (DoD) platforms, systems, subsystems, or equipment. This handbook is intended for DoD personnel responsible for requirements generation and acquisition life cycle processes, including test and evaluation of these end items. This handbook is consistent with the policies, responsibilities, and procedures of DoD Directives (DoDD) 5000.1, 3222.3, and 4650.1, DoD Instruction (DoDI) 5000.2, and the latest Chairman, Joint Chiefs of Staff Instructions (CJCSI) 3170.01 and 6212.01 and Chairman, Joint Chiefs of Staff Manual (CJCSM) 3170.01. Provisions of this handbook apply to research, development and acquisition activities for any electrical or electronic device which emits or which can be susceptible to electromagnetic (EM) energy either through intentional antenna coupling or through unintentional EM coupling mechanisms such as radiation penetration through the case and cable. Most electrical and electronic devices procured by DoD fall into these categories. The handbook may be used either to assure visibility, accountability, and control of the E3/SS effort, as well as its integration into the overall program, or to assure management awareness and cost effective tailoring of applicable E3 and SS interface and performance standards. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-HDBK-240, DOD HANDBOOK HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE (HERO) TEST GUIDE

MIL-HDBK-240, DOD HANDBOOK HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE (HERO) TEST GUIDE. This handbook is concerned with Hazards of Electromagnetic Radiation to Ordnance (HERO) testing for all Air Force, Army, Navy, and Marine Corps ordnance items and support equipment, for all mission areas. Although this handbook is intended primarily for use by Department of Defense (DoD) HERO test activities, it also provides a consolidation of corporate knowledge about the subject that should be of interest to procurement authorities and system developers. This handbook supplements MIL-STD-464 by providing guidance for verification of the HERO requirements in that standard. Documentation associated with HERO testing is described in Appendix A of this handbook. This handbook is for guidance only and cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-HDBK-241B, MILITARY HANDBOOK DESIGN GUIDE FOR ELECTROMAGNETIC INTERFERENCE (EMI) REDUCTION IN POWER SUPPLIES

MIL-HDBK-241B, MILITARY HANDBOOK DESIGN GUIDE FOR ELECTROMAGNETIC INTERFERENCE (EMI) REDUCTION IN POWER SUPPLIES.

MIL-HDBK-244A, MILITARY HANDBOOK GUIDE TO AIRCRAFT/STORES

MIL-HDBK-244A, MILITARY HANDBOOK GUIDE TO AIRCRAFT/STORES COMPATIBILITY. The handbook is intended to cover all aspects of aircraft/weapons compatibility: mechanical, electrical, structural, aerodynamic, etc. These are dealt with individually as they relate to various elements of the complete system. The material has been organized to present design guidelines for the five general categories of weapon system components: aircraft, suspension equipment, stores, stores management equipment, and ground support equipment. This information deals with compatibility of the components while the system is on the ground, in flight, and during weapon delivery.

MIL-HDBK-245D, HANDBOOK FOR PREPARATION OF STATEMENT OF WORK (SOW)

MIL-HDBK-245D, HANDBOOK FOR PREPARATION OF STATEMENT OF WORK (SOW). This handbook provides guidance to enable personnel to create a completed contract Statement of Work (SOW) applicable to any material acquisition life-cycle phase. It also covers the SOW preparation for non-personal services contracts.

MIL-HDBK-246A, MILITARY HDBK, PROGRAM MANAGERS GUIDE FOR THE STANDARD ELECTRONIC MODULES PROGRAM

MIL-HDBK-246A, MILITARY HDBK, PROGRAM MANAGERS GUIDE FOR THE STANDARD ELECTRONIC MODULES PROGRAM.

MIL-HDBK-248B, MILITARY HANDBOOK ACQUISITION STREAMLINING

MIL-HDBK-248B, MILITARY HANDBOOK ACQUISITION STREAMLINING. This handbook provides guidance Information pertaining to the implementation of Department of Defense acquisition streamlining policies as directed by DODD 5000.43.

MIL-HDBK-251, MILITARY HANDBOOK RELIABILITY/DESIGN THERMAL APPLICATIONS

MIL-HDBK-251, MILITARY HANDBOOK RELIABILITY/DESIGN THERMAL APPLICATIONS. This handbook recommends and presents electronic parts stress analyis methods which lead to the selection of maximum safe temperatures for parts so that the ensuing thermal design is consistent with the required equipment reliability. These maximum parts temperature must be properly selected since they are the goals of the thermal design, a fact which is often overlooked. Many thermal designs are inadequate because improper maximum parts temperture were selected as design goals. Consequently, the necessary parts stress analysis procedures have been emphasized. Specific step by step thermal design procedures are given in chapter 4.

MIL-HDBK-253, MILITARY HANDBOOK GUIDANCE FOR THE DESIGN AND TEST OF SYSTEMS PROTECTED AGAINST THE EFFECTS OF ELECTROMAGNETIC ENERGY

MIL-HDBK-253, MILITARY HANDBOOK GUIDANCE FOR THE DESIGN AND TEST OF SYSTEMS PROTECTED AGAINST THE EFFECTS OF ELECTROMAGNETIC ENERGY. The purpose of, this document is to provide program managers with guidance for the design and test of electronic systems which are to be immune to the detrimental effects of electromagnetic energy.

MIL-HDBK-258 (AS), MILITARY HANDBOOK INTERFACE CONTROL DOCUMENT INFRARED FOR DETECTING SET AN/AAS-36

MIL-HDBK-258 (AS), MILITARY HANDBOOK INTERFACE CONTROL DOCUMENT INFRARED FOR DETECTING SET AN/AAS-36. This handbook establishes the physical and functional interface for aircraft installation of the AN/AAS-36 infrared detecting set (IRDS). The physical and electrical interfaces are defined for the IRDS supplier, the airframe contractor and the operational program

MIL-HDBK-259 (NAVY) - LIFE CYCLE COST IN NAVY ACQUISITIONS

MILITARY HANDBOOK, LIFE CYCLE COST IN NAVY ACQUISITIONS., This handbook provides information on the use of life cycle coating in system and equipment acquisitions. It makes no attempt to develop a LCC standard but rather describes the general methodology and procedures which help make life cycle coating a productive in-house tool as well as a means of program or project evaluation. As inroads are made in the usage of LCC analysis, estimating and implementation techniques should improve, particularly in the operating and support (O&S) cost areas. To maximize their usefulness, LCC analyses should be tailored to the particular needs of an acquisition.

MIL-HDBK-260, DOD HANDBOOK, REFERENCE DATA FOR LOGISTICS METRICS

MIL-HDBK-260, DOD HANDBOOK, REFERENCE DATA FOR LOGISTICS METRICS. This handbook contains abbreviated reference information in logistics metrics.

MIL-HDBK-263B, MILITARY HANDBOOK ELECTROSTATIC DISCHARGE CONTROL HNBK FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES, AND EQUIPMENT (EX

MIL-HDBK-263B, MILITARY HANDBOOK ELECTROSTATIC DISCHARGE CONTROL HNBK FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES, AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) (METRIC). Electrostatic Discharge Control Handbook for protection of electrical and electronic parts, assemblies and equipment (excluding electrically initiated explosive devices). This handbook provides guidance for developing, implementing and monitoring an ESD control program in accordance with the requirements of MIL-STD-1686.

MIL-HDBK-264, MILITARY HANDBOOK STEEL SHAPES & PLATE BEAM COMBINATION USED IN SHIPBUILDING, PROPERTIES OF (30 SEP 1980)

MIL-HDBK-264, MILITARY HANDBOOK STEEL SHAPES & PLATE BEAM COMBINATION USED IN SHIPBUILDING, PROPERTIES OF (30 SEP 1980)., This handbook contains tabulations of the properties of the following items (using the 1978 American Institute of Steel Construction standard series of wide flange shapes): Combined beam and plate, Columns, and Structural shape catalogs.

MIL-HDBK-267A (SH), GUIDE FOR SELECTION OF LUBRICANTS AND HYDRAULIC FLUIDS FOR USE IN SHIPBOARD EQUIPMENT

MIL-HDBK-267A (SH), GUIDE FOR SELECTION OF LUBRICANTS AND HYDRAULIC FLUIDS FOR USE IN SHIPBOARD EQUIPMENT. This handbook provides basic and fundamental information on the selection and limitations of lubricants and hydraulic fluids for use in shipboard equipment.

MIL-HDBK-268 (AS), SURVIVABILITY ENHANCEMENT, AIRCRAFT CONVENTIONAL WEAPON THREATS, DESIGN AND EVALUATION GUIDELINES

MIL-HDBK-268 (AS). SURVIVABILITY ENHANCEMENT, AIRCRAFT CONVENTIONAL WEAPON THREATS, DESIGN AND EVALUATION GUIDELINES.This handbook is a reference document providing uniform design and evaluation guidelines for the survivability enhancement of aircraft Mission-Essential Weapon Systems (MEWS) for the Naval Air Systems Command, to ensure that effective combat operations are achieved when operating in a conventional weapon threat environment. The design guidelines encompass signature suppression (or its control) and vulnerability reduction. Those elements and design activities that are related to survivability enhancement, but are derived from the degradation of threat subsystem functions (e.g., electronic warfare) or from the ways that the aircraft can be utilized in a hostile environment (e.g., tactics) are not included. The evaluation guidelines, for the purpose of achieving systematic quantification and evaluation of combat survivability, include definition of mission scenario and associated threat environment, vulnerability to threat damage mechanisms, encounter survivability, and survivability enhancement trade-offs.

MIL-HDBK-270A, MILITARY HANDBOOK METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS

MIL-HDBK-270A, MILITARY HANDBOOK METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC). his handbook provides the following technical data and information for metals and alloys (in particular, aluminum, copper, nickel, and titanium alloys, and corrosion-resisting stainless steel).

MIL-HDBK-272A, MILITARY HDBK NUCLEAR WEAPONS SYSTEMS, SAFETY DESIGN AND EVALUATION , CRITERIA FOR

MIL-HDBK-272A, MILITARY HDBK NUCLEAR WEAPONS SYSTEMS, SAFETY DESIGN AND EVALUATION , CRITERIA FOR, This handbook provides safety design and evaluation criteria that apply to nuclear weapon systems and their associated equipment for which funding and tasking are the responsibility of NAVSEA or the appropriate PEO and Program Managers.

MIL-HDBK-273 (AS), MILITARY HANDBOOK SURVIVABILITY ENHANCEMENT, AIRCRAFT, NUCLEAR WEAPON THREAT, DESIGN AND EVALUATION GUIDELINES

MIL-HDBK-273 (AS), MILITARY HANDBOOK SURVIVABILITY ENHANCEMENT, AIRCRAFT, NUCLEAR WEAPON THREAT, DESIGN AND EVALUATION GUIDELINES. This handbook is a reference document providing uniform design and evaluation guidelines for the survivability enhancement of aircraft Mission-Essential Weapons Systems (MEWS), within or for the Naval Air Systems Command, to ensure that effective combat operations are achieved when operating in a nuclear threat environment. Those elements and design activities that are related to survivability enhancement but are derived from the degradation of threat subsystem functions (e.g., electronic warfare) or from the ways that the aircraft can be utilized in a hostile environment (e.g., tactics) are not included. The evaluation guidelines, for the purpose of achieving systematic quantification and evaluation of combat survivability, include definition of mission scenario and associated threat environment, vulnerability to threat damage mechanisms, encounter survivability, and survivability enhancement trade-offs.

MIL-HDBK-274 (AS), MILITARY HANDBOOK, ELECTRICAL GROUNDING FOR AIRCRAFT SAFETY

MIL-HDBK-274 (AS), MILITARY HANDBOOK, ELECTRICAL GROUNDING FOR AIRCRAFT SAFETY. This handbook was developed for use by the Naval Air Systems Command and will provide a single source reference to ensure that aircraft under it6 jurisdiction are properly grounded and bonded. This handbook is not intended to be referenced in purchase specifications except for informational purposes nor shall it super6ede any specification requirements, 2. This document reflects the latest equipment and procedures used for the electrical grounding and bonding of Naval aircraft. It is the intent to review this handbook periodically to insure its completeness and currency.

MIL-HDBK-275A, MILITARY HANDBOOK GUIDE FOR SELECTION OF LUBRICANT FLUIDS AND COMPOUNDS FOR USE IN FLIGHT VEHICLES AND COMPONENTS

MIL-HDBK-244A, MILITARY HANDBOOK GUIDE TO AIRCRAFT/STORES COMPATIBILITY. The handbook is intended to cover all aspects of aircraft/weapons compatibility: mechanical, electrical, struc- tural, aerodynamic, etc. Theseare dealt with individually as they relate to various elements of the complete system. The material has been organized to present design guidelines for the five general categories of weapon system components: aircraft, suspension equipment, stores, stores management equipment, and ground support equipment. This information deals with compatibility of the components while the system is on the ground, in flight, and during weapon delivery.

MIL-HDBK-275A, MILITARY HANDBOOK GUIDE FOR SELECTION OF LUBRICANT FLUIDS AND COMPOUNDS FOR USE IN FLIGHT VEHICLES AND COMPONENTS

MIL-HDBK-275A, MILITARY HANDBOOK GUIDE FOR SELECTION OF LUBRICANT FLUIDS AND COMPOUNDS FOR USE IN FLIGHT VEHICLES AND COMPONENTS. This handbook establishes design guides for selection of suitable lubricant fluids and compounds that conform to approved specifications, as required by MIL-STD-838.

MIL-HDBK-276-1 (MC), MILITARY HANDBOOK LIFE CYCLE COST MODEL FOR DEFENSE MATERIEL SYSTEMS DATA COLLECTION WORKBOOK (3 FEB 1984)

MIL-HDBK-276-1 (MC), MILITARY HANDBOOK LIFE CYCLE COST MODEL FOR DEFENSE MATERIEL SYSTEMS DATA COLLECTION WORKBOOK (3 FEB 1984)., This handbook provides information on the cost elements and structure of the Marine Corps Life Cycle Cost Model for Defense Materiel Systems.

MIL-HDBK-278 (NOTICE 1), MILITARY HANDBOOK SYSTEM DESIGN GUIDE FOR APPLYING FIBER OPTIC TECHNOLOGY TO SHIPBOARD SYSTEMS (31 MAR 1993) (NO SUPERSEDING

MIL-HDBK-278 (NOTICE 1), MILITARY HANDBOOK SYSTEM DESIGN GUIDE FOR APPLYING FIBER OPTIC TECHNOLOGY TO SHIPBOARD SYSTEMS (31 MAR 1993) (NO SUPERSEDING DOCUMENT).

MIL-HDBK-278, MILITARY HANDBOOK SYSTEM DESIGN GUIDE FOR APPLYING FIBER OPTIC TECHNOLOGY TO SHIPBOARD SYSTEMS (03 AUG 1984).

MIL-HDBK-278, MILITARY HANDBOOK SYSTEM DESIGN GUIDE FOR APPLYING FIBER OPTIC TECHNOLOGY TO SHIPBOARD SYSTEMS (03 AUG 1984)., This System Design Guide (SDG) has been written to provide guidance to the system designer who will be using fiber optic technology onboard all ships.

MIL-HDBK-279 (NOTICE 1), MILITARY HDBK TOTAL-DOSE HARDNESS ASSURANCE GUIDELINES FOR SEMICONDUCTOR AND MICROCIRCUITS

MIL-HDBK-279 (NOTICE 1), MILITARY HANDBOOK TOTAL-DOSE HARDNESS ASSURANCE GUIDELINES FOR SEMICONDUCTOR AND MICROCIRCUITS. MIL-HDBK-279, dated 25 January 1985, is hereby canceled. It has been superseded by MIL-HDBK-814, “Ionizing Dose and Neutron Hardness Assurance Guidelines for Microcircuits and Semiconductor Devices”.

MIL-HDBK-279, MILITARY HDBK TOTAL-DOSE HARDNESS ASSURANCE GUIDELINES FOR SEMICONDUCTOR AND MICROCIRUIT

MIL-HDBK-279, MILITARY HDBK TOTAL-DOSE HARDNESS ASSURANCE GUIDELINES FOR SEMICONDUCTOR AND MICROCIRUITS. The scope of this document is limited to total-dose effects on electronic piece parts. It does not address overall system hardness assurance activities. However, occasionally, specific system requirements may be briefly addresses when it facilitates the discussion.

MIL-HDBK-280 (NOTICE 1), MILITARY HANDBOOK NEUTRON HARDNESS ASSURANCE GUIDELINES FOR SEMICONDUCTOR DEVICES AND MICROCIRCUITS

MIL-HDBK-280 (NOTICE 1), MILITARY HANDBOOK NEUTRON HARDNESS ASSURANCE GUIDELINES FOR SEMICONDUCTOR DEVICES AND MICROCIRCUITS. MIL-HDBK-280, dated 19 February 1985, is hereby canceled and superseded by MIL-HDBK-814, “Ionizing Dose and Neutron Hardness Assurance Guidelines for Microcircuits and Semiconductor Devices”.

MIL-HDBK-280, MILITARY HANDBOOK NEUTRON HARDNESS ASSURANCE GUIDELINES FOR SEMICONDUCTOR DEVICES AND MICROCIRCUITS

MIL-HDBK-280, MILITARY HANDBOOK NEUTRON HARDNESS ASSURANCE GUIDELINES FOR SEMICONDUCTOR DEVICES AND MICROCIRCUITS. The purpose of this handbook is to provide guidelines of a systematic approach to the selection and procurement of electronic piece parts, which shall be used in a system that must survive in a specified neutron environment.

MIL-HDBK-283 (SH), MILITARY HANDBOOK STRUCTURAL SHIPBUILDING DETAILS USING TEE STIFFENERS

MIL-HDBK-283 (SH), MILITARY HANDBOOK STRUCTURAL SHIPBUILDING DETAILS USING TEE STIFFENERS. This handbook provides a convenient procedure for the selection of a variety of structural details for use in the construction of combatant, special auxiliary and assault ships of the U.S. Navy. The specific guidance provided throughout this document reflects the general guidance provided in Drawings 805-2460264-B and 805-2878699-A. This handbook resolves ambiguities and eliminates subjective interpretations of the information presented in those drawings. As a result, this handbook replaces those drawings. Comments regarding the method of presentation and utility of the information contained herein are solicited.

MIL-HDBK-284-1, MILITARY HDBK INTERACTIVE COURSEWARE (ICS) FOR MILITARY TRAINING, MANAGER'S GUIDE FOR DEVELOPMENT, ACQUISITION, AND MGMT OF (1 OF 3)

MIL-HDBK-284-1, MILITARY HDBK INTERACTIVE COURSEWARE (ICS) FOR MILITARY TRAINING, MANAGER'S GUIDE FOR DEVELOPMENT, ACQUISITION, AND MGMT OF (1 OF 3 PARTS). This handbook describes all phases of ICW analysis, design, development, implementation, and logistic and life cycle support through the application of MIL-STD-1379 task descriptions and associated data item descriptions to appropriate contract vehicles.

MIL-HDBK-284-2, MILITARY HDBK INTERACTIVE COURSEWARE (ICS) FOR MILITARY TRAINING, MANAGER'S GUIDE FOR DEVELOPMENT, ACQUISITION, AND MGMT OF (2 OF 3)

MIL-HDBK-284-2, MILITARY HDBK INTERACTIVE COURSEWARE (ICS) FOR MILITARY TRAINING, MANAGER'S GUIDE FOR DEVELOPMENT, ACQUISITION, AND MGMT OF (2 OF 3 PARTS). This handbook describes all phases of ICW analysis, design, development, implementation, and logistic and life cycle support through the application of MIL-STD-1379 task descriptions and associated data item descriptions to appropriate contract vehicles.

MIL-HDBK-284-3, MILITARY HDBK INTERACTIVE COURSEWARE (ICS) FOR MILITARY TRAINING, MANAGER'S GUIDE FOR DEVELOPMENT, ACQUISITION, AND MGMT OF (3 OF 3)

MIL-HDBK-284-3, MILITARY HDBK INTERACTIVE COURSEWARE (ICS) FOR MILITARY TRAINING, MANAGER'S GUIDE FOR DEVELOPMENT, ACQUISITION, AND MGMT OF (3 OF 3 PARTS). This handbook describes all phases of ICW analysis, design, development, implementation, and logistic and life cycle support through the application of MIL-STD-1379 task descriptions and associated data item descriptions to appropriate contract vehicles.

MIL-HDBK-286, MILITARY HDBK A GUIDE FOR DOD-STD-2168 DEFENSE SYSTEM SOFTWARE QUALITY PROGRAM

MIL-HDBK-286, MILITARY HANDBOOK A GUIDE FOR DOD-STD-2168 DEFENSE SYSTEM SOFTWARE QUALITY PROGRAM. This handbook provides guidance to Government Program managers and other program office staff responsible for applying DOD-STD-2168, Defense System Software Quality Program.

MIL-HDBK-287 A Tailoring Guide for DOD-STD-2167A, Defense System Software Development

A Tailoring Guide for DOD-STD-2167A, Defense System Software Development. This handbook provides guidance to Government program managers and other program office staff responsible for tailoring DOD-STD-2167A for a software development or support contract.

MIL-HDBK-288 (MC), REVIEW AND ACCEPTANCE OF ENGINEERING DRAWING PACKAGES

MIL-HDBK-288 (MC), REVIEW AND ACCEPTANCE OF ENGINEERING DRAWING PACKAGES. This handbook provides a method to review and document the review of EDP's.

MIL-HDBK-288A (MC), REVIEW AND ACCEPTANCE OF ENGINEERING DRAWING PACKAGES

MIL-HDBK-288A (MC), REVIEW AND ACCEPTANCE OF ENGINEERING DRAWING PACKAGES. This handbook provides a method to review and document the review of Engineering Data Packages (EDP).

MIL-HDBK-288B, REVIEW AND ACCEPTANCE OF ENGINEERING DRAWING PACKAGES

MIL-HDBK-288B, REVIEW AND ACCEPTANCE OF ENGINEERING DRAWING PACKAGES. This handbook provides a method to review and document the review of Engineering Data Packages (EDP).

MIL-HDBK-290 (SH) (NOTICE 1), STANDARD ELECTRICAL SYMBOL LIST

MIL-HDBK-290 (SH) (NOTICE 1), STANDARD ELECTRICAL SYMBOL LIST. The following pages of MIL-HDBK-290 (SH) have been revised and supersede the pages listed.

MIL-HDBK-290 (SH), MILITARY HANDBOOK STANDARD ELECTRICAL SYMBOL LIST

MIL-HDBK-290 (SH), MILITARY HANDBOOK STANDARD ELECTRICAL SYMBOL LIST. This handbook covers standard symbol numbers which are used in the preparation, revision, and interpretation of ship's electrical and electronic system drawings.

MIL-HDBK-291, MILITARY HANDBOOK CARGO TANK CLEANING

MIL-HDBK-291, MILITARY HANDBOOK CARGO TANK. This handbook provides basic and fundamental information for cargo tank cleaning requirements, safety precautions, equipment and procedures.

MIL-HDBK-293, MILITARY HDBK ELECTRONIC COUNTER-COUNTERMEASURES CONSIDERATIONS IN RADAR SYSTEMS ACQUISITION

MIL-HDBK-293, MILITARY HDBK ELECTRONIC COUNTER-COUNTERMEASURES CONSIDERATIONS IN RADAR SYSTEMS ACQUISITION. This handbook provides guidelines for incorporating electronic counter-countermeasures (ECCM) into United States Naval radar Systems during the System acquisition process. The handbook should be useful to project or acquisition directors and other participants in the acquisition process, particularly cognizant managers in the office of the Chief of Naval Operations (CNO), the Naval Systems Commands (SYSCOM), the Naval Intelligence Center (NIC), the Naval Security Group (NSG), and personnel in the design, development and production agencies.

MIL-HDBK-294, MILITARY HDBK ELECTRONIC COUNTER-COUNTERMEASURES CONSIDERATIONS IN NAVAL COMMUNICATIONS SYSTEMS

MIL-HDBK-294, MILITARY HDBK ELECTRONIC COUNTER-COUNTERMEASURES CONSIDERATIONS IN NAVAL COMMUNICATIONS SYSTEMS. his handbook provides guidelines for incorporating electronic counter-countermeasures (ECCM) into United States Naval communication systems during the system acquisition process. While the handbook is specifically addressed to the project or acquisition director, it should be useful to other participants in the acquisition process, particularly cognizant managers in the office of the Chief of Naval Operations (CNO), the Naval Intelligence Center (NIC), the Naval Security Group (NSG), and personnel in the design, development, and production agencies.

MIL-HDBK-297, MIL-HDBK-297, MILITARY HANDBOOK, INTRODUCTION TO WEAPON EFFECTS FOR SHIPS (METRIC)

MIL-HDBK-297, MILITARY HANDBOOK, INTRODUCTION TO WEAPONEFFECTS FOR SHIPS (METRIC). This handbook has been prepared to provide a tutorial on the basic concepts of explosion phenomena and damage effects from nuclear and non-nuclear weapons. It is recommended reading for engineers desiring an introduction to these subjects as they relate to the vulnerability or survivability of ships and mission essential weapons systems, and to passive protection design.

MIL-HDBK-298, MILITARY HDBK SELECTION, INSTALLATION AND TROUBLESHOOTING OF RESISTANCE THERMOMETERS AND THERMOCOUPLE SENSORS

MIL-HDBK-298, MILITARY HDBK SELECTION, INSTALLATION AND TROUBLESHOOTING OF RESISTANCE THERMOMETERS AND THERMOCOUPLE SENSORS. This handbook covers the selection, installation and trouble-shooting of thermocouple sensors and resistance thermometers that are constructed in accordance with MIL-T-24388

MIL-HDBK-299, MILITARY HANDBOOK, CABLE COMPARISON HDBK DATA PERTAINING TO ELECTRICAL SHIPBOARD CABLE

MIL-HDBK-299, MILITARY HANDBOOK, CABLE COMPARISON HDBK DATA PERTAINING TO ELECTRICAL SHIPBOARD CABLE. This document supplements departmental manuals, directives, military standards, and so forth, and provides basic information on shipboard cables.