W-S-896G, FEDERAL SPECIFICATION: SWITCHES, TOGGLE (TOGGLE AND LOCK), FLUSH MOUNTED (GENERAL SPECIFICATION) (04-NOV-2014)

W-S-896G, FEDERAL SPECIFICATION: SWITCHES, TOGGLE (TOGGLE AND LOCK), FLUSH MOUNTED (GENERAL SPECIFICATION) (04-NOV-2014)., This specification covers the general requirements for flush mounted toggle and lock switches, designed for mounting in switch boxes by means of an integral strap (see 6.1). Switches, as covered by this specification, are intended for use in any electrical circuit within voltage and current limitations and at full voltage to ground except AC-DC type switches must not be used on circuits more than 125 volts to ground and the current rating should be reduced 50 percent on inductive loads.