Ident. Num:
DOD-HDBK-178
DOD-HDBK-178 (NOTICE 1) MILITARY HANDBOOK QUANTITATIVE DESCRIPTION OF OBSCURATION FACTORS FOR ELECTRO-OPTICAL & MILLIMETER WAVE SYSTEMS (24 OCT 2000)., DOD-HDBK-178, dated 25 July 1986, has been reviewed and
determined to be valid for use in acquistion.
Ident. Num:
DOD-HDBK-178
Rev. Num:
-
DOD-HDBK-178 (ER), MILITARY HANDBOOK QUANTITATIVE DESCRIPTION OF OBSCURATION FACTORS FOR ELECTRO-OPTICAL & MILLIMETER WAVE SYSTEMS (25 JUL 1986)., This handbook is intended to be a basic design tool for the Army engineer or scientist. This handbook is structured to provided (1) a basic understanding of the optical properties of natural obscurates and battlefield-induced contaminants (2) a descritpion of type and magnitude of the effect that each obscurant may have on generic electro-optical (EO) and mmw systems; (3) the data and procedures to enable the engineer to calculate the effects of these obscurants on a user-specified systems design.
Ident. Num:
DOD-HDBK-249
Rev. Num:
A
DOD-HDBK-249A, MILITARY HANDBOOK METALS AND ALLOYS, RAPID ON-SITE IDENTIFICATION OF (RECOMMENDED PROCEDURE FOR CHEMICAL SPOT TESTING AND ASSOCIATED PHYSICAL TESTS TO VERIFY METAL ALLOY CLASSIFICATION) (26 DEC 1984)., This handbook describes the equipment and procedures for rapid on-site identification of metals and alloys. These procedures are not intended for use when quantitative chemical analysis is required, but will provide a reliable means of identifying the most common categories of metals and alloys.
Ident. Num:
DOD-HDBK-269
Rev. Num:
-
DOD-HDBK-269 (SH), MILITARY HANDBOOK FITTING OUT HANDBOOK-SHIPS (31 MAR 1982)., The purpose of this handbook is to provide information and guidance to all persons in the Department of the Navy. It establishes and promulgates policy, procedures, and general guidance to Government personnel for fitting out ships and undergoing new construction, conversion, and modernization in private and Naval Shipyards.
Ident. Num:
DOD-HDBK-281
Rev. Num:
-
DOD-HDBK-281 (NOTICE-1), MILITARY HANDBOOK, GUIDANCE FOR THE USE OF DOD-STD-1679A (21 DEC 1990).
Ident. Num:
DOD-HDBK-281
DOD-HDBK-281, MILITARY HANDBOOK, GUIDANCE FOR THE USE OF DOD-STD-1679A (22 OCT 1984)., This Handbook provides a common interpretation of DOD-STD-1679A, Software Development, and information to maximize its utility.
Ident. Num:
DOD-HDBK-282
Rev. Num:
-
DOD-HDBK-282, MILITARY HANDBOOK, FIBER OPTIC CABLE INSTALLATION PROCEDURES (28 FEB 1985)., This handbook is concerned with fiber optic cable and shipyard installation procedures.
Ident. Num:
DOD-HDBK-289
Rev. Num:
-
DOD-HDBK-289 (SH), MILITARY HANDBOOK LIGHTING ON NAVAL SHIPS (26 NOV 1986)., The purpose of this handbook is to disseminate up–to-date information
necessary for the optimum utilization of lighting fixtures and lighting installations
on Naval ships. The criteria contained herein are based on both new
requirements and past practices in general use. It should be noted, however,
that the nature and peculiarities of certain types of ships or certain areas
of application may necessitate a deviation from these criteria, thereby requiring
a judicious application of same.
Ident. Num:
DOD-HDBK-292
Rev. Num:
-
DOD-HDBK-292-1, MILITARY HANDBOOK, TRAINING MATERIALS DEVELOPMENT PART 1 OF 2 (31 OCT 1986) [S/S BY MIL-HDBK-1379/2]., This handbook provides standardized procedures and guidelines for the preparation, support, review, approval, and evaluation of military training data/materials as specified in MIL-STD-001379 for the Training Materials Development Process.
Ident. Num:
DOD-HDBK-292
Rev. Num:
-
DOD-HDBK-292-2, MILITARY HANDBOOK, TRAINING MATERIALS DEVELOPMENT PART 2 OF 2 (31 OCT 1986) [S/S BY MIL-HDBK-1379/2]., This document supplements departmental manuals, directives, and military standards and provides basic and fundamental information on training material development. It should provided valuable information on training material development.
Ident. Num:
DOD-HDBK-343
Rev. Num:
-
DOD-HDBK-343 (USAF), MILITARY HANDBOOK DESIGN, CONSTRUCTION, AND TESTING REQUIREMENTS FOR ONE OF A KIND SPACE EQUIPMENT (1 FEB 1986)., This handbook provides definitions of various classes of space programs and of various classes of space equipment. The handbook also provides detailed technical requirements for the design, construction, and testing of various classes of space equipment. These requirements are a composite of those that have previous been found to be cost effective for one of a kind space programs. The information presented is intended to aid in the formulation of more detailed requirements including design, manufacturing, and testing for specific programs.
Ident. Num:
DOD-HDBK-345
Rev. Num:
-
DOD-HDBK-345 (NOTICE 1), MILITARY HANDBOOK, MIL-STD-1567, WORK MEASUREMENT VERIFICATION AND COMPLIANCE (14 DEC 1999)., DOD-HDBK-345, dated 20 June 1988, is hereby canceled without replacement.
Ident. Num:
DOD-HDBK-345
Rev. Num:
-
DOD-HDBK-345, MILITARY HANDBOOK, MIL-STD-1567, WORK MEASUREMENT VERIFICATION AND COMPLIANCE (20 JUN 1987)., This handbook prescribes guidelines for performing verification of offerer/contractor policies and procedures with MIL-STD-1567 contractual requirements and review of contractor compliance.
Ident. Num:
DOD-HDBK-743
Rev. Num:
A
DOD-HDBK-743A, MILITARY HANDBOOK ANTHROPOMETRY OF U.S. MILITARY PERSONNEL (METRIC). The purpose of this handbook is to present body size information on
the military personnel of the United States in the form of anthropometric
data. These data are suitable for human factors engineering applications in
the design and development of military systems, equipment, and materiel and in
the design and sizing of military clothing and personal equipment.
Ident. Num:
DOD-HDBK-763
Rev. Num:
-
DOD-HDBK-763 (NOTICE 1), MILITARY HANDBOOK HUMAN ENGINEERING PROCEDURES GUIDE (28 JUL 1999) [S/S BY MIL-HDBK-46855].
Ident. Num:
DOD-HDBK-791
Rev. Num:
-
DOD-HDBK-791 (AM), MILITARY HANDBOOK, MAINTAINABILITY DESIGN TECHNIQUES (17 MAR 1988)., This document supplements departmental manuals, directives, military standards, etc., and provides
basic information on the design of equipment so that the equipment can be (a) serviced efficiently and
effectively if servicing is required and (b) repaired efficiently and effectively if it should fail. The
handbook -by text. illustrations, tables, and examples embraces information on the extent and nature of
the maintenance problem as it exists today and the principles and techniques. if included in future designs.
will reduce the problem. Designers will find this handbook an invaluable aid in applying the principles of
maintainability engineering.