Your free source for specifications, standards, and handbooks
DOE-STD
DOE-STD-1022-94, DOE STANDARD NATURAL PHENOMENA HAZARDS SITE CHARACTERIZATION CRITERIA
DOE-STD-1022-94, DOE STANDARD NATURAL PHENOMENA HAZARDS SITE CHARACTERIZATION CRITERIA.The criteria and recommendations in this standard shall apply to site characterization for the purpose of mitigating Natural Phenomena Hazards in all DOE facilities covered by DOE O 420.1. Criteria for site characterization not related to NPH are generally not included in this document unless they are deemed necessary for clarification. General and detailed site characterization requirements are provided in the areas of meteorology, hydrology, geology, seismology and geotechnical studies.
Ident. Num:
DOE-STD-1022
Rev. Num:
-
DOE-STD-1022-94, DOE STANDARD NATURAL PHENOMENA HAZARDS SITE CHARACTERIZATION CRITERIA.The criteria and recommendations in this standard shall apply to site characterization for the purpose of mitigating Natural Phenomena Hazards in all DOE facilities covered by DOE O 420.1. Criteria for site characterization not related to NPH are generally not included in this document unless they are deemed necessary for clarification. General and detailed site characterization requirements are provided in the areas of meteorology, hydrology, geology, seismology and geotechnical studies.
DOE-STD-1023-95 (CHANGE NOTICE 1 W/ ERRATA), DOE STANDARD NATURAL PHENOMENA HAZARDS ASSESSMENT CRITERIA (APR 2002)
DOE-STD-1023-95 (CHANGE NOTICE 1 W/ ERRATA), DOE STANDARD NATURAL PHENOMENA HAZARDS ASSESSMENT CRITERIA (APR 2002). The purpose of this standard, DOE-STD-1023-95, is to provide criteria for natural phenomena hazard assessments to construct hazard curves. The mean hazard curve shall be used to determine the design basis NPH event for design and/or evaluation of DOE facilities. This Standard provides specific criteria applicable to various natural phenomena hazards including seismic, wind and tornado, and flood.
Ident. Num:
DOE-STD-1023
Rev. Num:
-
DOE-STD-1023-95 (CHANGE NOTICE 1 W/ ERRATA), DOE STANDARD NATURAL PHENOMENA HAZARDS ASSESSMENT CRITERIA (APR 2002). The purpose of this standard, DOE-STD-1023-95, is to provide criteria for natural phenomena hazard assessments to construct hazard curves. The mean hazard curve shall be used to determine the design basis NPH event for design and/or evaluation of DOE facilities. This Standard provides specific criteria applicable to various natural phenomena hazards including seismic, wind and tornado, and flood.
DOE-STD-1027-92 (CHANGE NOTICE 1), DOE STANDARD HAZARD CATEGORIZATION AND ACCIDENT ANALYSIS TECHNIQUES FOR COMPLIANCE WITH DOE ORDER 5480.23, NUCLEAR
DOE-STD-1027-92 (CHANGE NOTICE 1), DOE STANDARD HAZARD CATEGORIZATION AND ACCIDENT ANALYSIS TECHNIQUES FOR COMPLIANCE WITH DOE ORDER 5480.23, NUCLEAR SAFETY ANALYSIS REPORTS. The purpose of this DOE Standard is to establish guidance for the preparation and review of hazard categorization and accident analyses techniques as required in DOE Order 5480.23, Nuclear Safety Analysis Reports. This new Order requires further guidance to ensure consistency across all nuclear facilities within the DOE complex. This DOE Standard imposes no new requirements on nuclear facilities. Instead, it focuses on (1) the definition of the standard identifying nuclear facilities required to have SARs in order to comply with the Order, (2) the SAR implementation plan and schedule, (3) the hazard categorization methodology to be applied to all facilities, and (4) the accident analysis techniques appropriate for the graded approach addressed in the Order. DOE Order 5480.23 and its attached guidance document provide some direction on the use of the graded approach. This report is intended not to supersede that direction, but to supplement and clarify it. Methods other than those suggested in this guide may be considered for applying the graded approach, but they must be justified whenever grading is applied.
Ident. Num:
DOE-STD-1027
Rev. Num:
-
DOE-STD-1027-92 (CHANGE NOTICE 1), DOE STANDARD HAZARD CATEGORIZATION AND ACCIDENT ANALYSIS TECHNIQUES FOR COMPLIANCE WITH DOE ORDER 5480.23, NUCLEAR SAFETY ANALYSIS REPORTS. The purpose of this DOE Standard is to establish guidance for the preparation and review of hazard categorization and accident analyses techniques as required in DOE Order 5480.23, Nuclear Safety Analysis Reports. This new Order requires further guidance to ensure consistency across all nuclear facilities within the DOE complex. This DOE Standard imposes no new requirements on nuclear facilities. Instead, it focuses on (1) the definition of the standard identifying nuclear facilities required to have SARs in order to comply with the Order, (2) the SAR implementation plan and schedule, (3) the hazard categorization methodology to be applied to all facilities, and (4) the accident analysis techniques appropriate for the graded approach addressed in the Order. DOE Order 5480.23 and its attached guidance document provide some direction on the use of the graded approach. This report is intended not to supersede that direction, but to supplement and clarify it. Methods other than those suggested in this guide may be considered for applying the graded approach, but they must be justified whenever grading is applied.
DOE-STD-1073-2003, CONFIGURATION MANAGEMENT (OCT 2003)
DOE-STD-1073-2003, CONFIGURATION MANAGEMENT (OCT 2003). The purpose of this standard is to define the objectives of a configuration management process for DOE nuclear facilities (including activities and operations), and to provide detailed examples and supplementary guidance on methods of achieving those objectives. Configuration management is a disciplined process that involves both management and technical direction to establish and document the design requirements and the physical configuration of the nuclear facility and to ensure that they remain consistent with each other and the documentation.
Ident. Num:
DOE-STD-1073-2003
Rev. Num:
-
DOE-STD-1073-2003, CONFIGURATION MANAGEMENT (OCT 2003). The purpose of this standard is to define the objectives of a configuration management process for DOE nuclear facilities (including activities and operations), and to provide detailed examples and supplementary guidance on methods of achieving those objectives. Configuration management is a disciplined process that involves both management and technical direction to establish and document the design requirements and the physical configuration of the nuclear facility and to ensure that they remain consistent with each other and the documentation.
DOE-STD-1095-95, DOE STANDARD DEPARTMENT OF ENERGY LABORATORY
DOE-STD-1095-95, DOE STANDARD DEPARTMENT OF ENERGY LABORATORY ACCREDITATION PROGRAM FOR PERSONNEL DOSIMETRY SYSTEMS. This standard establishes the method for obtaining accreditation of personnel dosimetry systems by the Department of Energy Laboratory Accreditation Program.
Ident. Num:
DOE-STD-1095-95
DOE-STD-1095-95, DOE STANDARD DEPARTMENT OF ENERGY LABORATORY ACCREDITATION PROGRAM FOR PERSONNEL DOSIMETRY SYSTEMS. This standard establishes the method for obtaining accreditation of personnel dosimetry systems by the Department of Energy Laboratory Accreditation Program.
DOE-STD-1134-99, DOE-STD-113499, DOE STANDARD, REVIEW GUIDE FOR CRITICALITY SAFETY EVALUATIONS
DOE-STD-1134-99, DOE STANDARD, REVIEW GUIDE FOR CRITICALITY SAFETY EVALUATIONS. As in all safety disciplines, this Standard can only be constructively put to use by experienced criticality safety professionals utilizing their professional judgment and expertise. The purpose of this document is to provide a set of guidelines, not checklists, for use by DOE criticality safety personnel when reviewing criticality safety evaluations produced by the contractor. This review guide is intended to provide a consistent framework for assuring that acceptable evaluations are produced by DOE contractors.
Ident. Num:
DOE-STD-1134-99
DOE-STD-1134-99, DOE STANDARD, REVIEW GUIDE FOR CRITICALITY SAFETY EVALUATIONS. As in all safety disciplines, this Standard can only be constructively put to use by experienced criticality safety professionals utilizing their professional judgment and expertise. The purpose of this document is to provide a set of guidelines, not checklists, for use by DOE criticality safety personnel when reviewing criticality safety evaluations produced by the contractor. This review guide is intended to provide a consistent framework for assuring that acceptable evaluations are produced by DOE contractors.
DOE-STD-1138-2007, DOE STANDARD INDUSTRIAL HYGIENE FUNCTIONAL AREA QUALIFICATION STANDARD (NOV 2007)
DOE-STD-1138-2007, DOE STANDARD INDUSTRIAL HYGIENE FUNCTIONAL AREA QUALIFICATION STANDARD (NOV 2007). Industrial hygiene is the art and science of anticipation, recognition, evaluation, control and management of occupational health hazards. An industrial hygienist, through education and training, is that person whose duties are to advise on, administer, supervise, manage or perform professional and scientific work in industrial hygiene, including the identification and evaluation of conditions affecting the health and efficiency of employees or the public, the formulation and recommendation of measures to eliminate or control occupational health hazards, and the promotion of occupational health programs for instructing and motivating managers and employees in the prevention as well as correction of potential health hazards.
Ident. Num:
DOE-STD-1138
Rev. Num:
-
DOE-STD-1138-2007, DOE STANDARD INDUSTRIAL HYGIENE FUNCTIONAL AREA QUALIFICATION STANDARD (NOV 2007). Industrial hygiene is the art and science of anticipation, recognition, evaluation, control and management of occupational health hazards. An industrial hygienist, through education and training, is that person whose duties are to advise on, administer, supervise, manage or perform professional and scientific work in industrial hygiene, including the identification and evaluation of conditions affecting the health and efficiency of employees or the public, the formulation and recommendation of measures to eliminate or control occupational health hazards, and the promotion of occupational health programs for instructing and motivating managers and employees in the prevention as well as correction of potential health hazards.
DOE-STD-1146-2007 GENERAL TECHNICAL BASE QUALIFICATION STANDARD
DOE–STD–1146–2007, This technical qualification standard identifies the minimum technical competency requirements for DOE personnel. Although there are other competency requirements associated with the positions held by DOE personnel, this standard is limited to identifying the specific, common technical competencies required throughout all defense nuclear facilities. The competency requirements define the expected knowledge and/or skill that an individual must meet. Each of the competency requirements is further described by a list of supporting knowledge and/or skill statements. The supporting knowledge and/or skill statements for each competency statement are provided to challenge the employee in the breadth and depth of his/her understanding of the subject matter. Thus, the employee should be prepared to explain or demonstrate proficiency in all or part of the supporting knowledge and/or skill statements for each competency statement to the qualifying official or examining authority.
Ident. Num:
DOE–STD–1146–2007
DOE–STD–1146–2007, This technical qualification standard identifies the minimum technical competency requirements for DOE personnel. Although there are other competency requirements associated with the positions held by DOE personnel, this standard is limited to identifying the specific, common technical competencies required throughout all defense nuclear facilities. The competency requirements define the expected knowledge and/or skill that an individual must meet. Each of the competency requirements is further described by a list of supporting knowledge and/or skill statements. The supporting knowledge and/or skill statements for each competency statement are provided to challenge the employee in the breadth and depth of his/her understanding of the subject matter. Thus, the employee should be prepared to explain or demonstrate proficiency in all or part of the supporting knowledge and/or skill statements for each competency statement to the qualifying official or examining authority.
DOE-STD-1170-2007, DOE STANDARD ELECTRICAL SYSTEMS AND SAFETY OVERSIGHT FUNCTIONAL AREA QUALIFICATION STANDARD (AUG 2007)
DOE-STD-1170-2007, DOE STANDARD ELECTRICAL SYSTEMS AND SAFETY OVERSIGHT FUNCTIONAL AREA QUALIFICATION STANDARD (AUG 2007). The Electrical Systems and Safety Oversight FAQS establishes general and specific functional area competency requirements for all DOE Electrical Systems and Safety Oversight personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities and, when appropriate, to other DOE facilities.
Ident. Num:
DOE-STD-1170
Rev. Num:
-
DOE-STD-1170-2007, DOE STANDARD ELECTRICAL SYSTEMS AND SAFETY OVERSIGHT FUNCTIONAL AREA QUALIFICATION STANDARD (AUG 2007). The Electrical Systems and Safety Oversight FAQS establishes general and specific functional area competency requirements for all DOE Electrical Systems and Safety Oversight personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities and, when appropriate, to other DOE facilities.
DOE-STD-1182-2004, DOE STANDARD CIVIL/STRUCTURAL ENGINEERING FUNCTIONAL AREA QUALIFICATION STANDARD (MAR 2004)
DOE-STD-1182-2004, DOE STANDARD CIVIL/STRUCTURAL ENGINEERING FUNCTIONAL AREA QUALIFICATION STANDARD (MAR 2004)., The Civil/Structural Engineering Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. The technical Functional Area Qualification Standard has been developed as a tool to assist DOE Program and Field offices in the development and implementation of the Technical Qualification Program in their organization. For ease of transportability of qualifications between DOE elements, Program and Field offices are expected to use this technical Functional Area Qualification Standard without modification or additions. Needed additional office/site/facility specific technical competencies should be handled separately. Satisfactory and documented attainment of the competency requirements contained in this technical Functional Area Qualification Standard ensures that personnel possess the requisite competence to fulfill their functional area duties and responsibilities. Office/Facility-Specific Qualification Standards supplement this technical Functional Area Qualification Standard and establish unique operational competency requirements at the Headquarters or Field element, site, or facility level.
Ident. Num:
DOE–STD–1182-2004
Rev. Num:
-
DOE-STD-1182-2004, DOE STANDARD CIVIL/STRUCTURAL ENGINEERING FUNCTIONAL AREA QUALIFICATION STANDARD (MAR 2004)., The Civil/Structural Engineering Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. The technical Functional Area Qualification Standard has been developed as a tool to assist DOE Program and Field offices in the development and implementation of the Technical Qualification Program in their organization. For ease of transportability of qualifications between DOE elements, Program and Field offices are expected to use this technical Functional Area Qualification Standard without modification or additions. Needed additional office/site/facility specific technical competencies should be handled separately. Satisfactory and documented attainment of the competency requirements contained in this technical Functional Area Qualification Standard ensures that personnel possess the requisite competence to fulfill their functional area duties and responsibilities. Office/Facility-Specific Qualification Standards supplement this technical Functional Area Qualification Standard and establish unique operational competency requirements at the Headquarters or Field element, site, or facility level.
DOE-STD-1182-2004, DOE STANDARD CIVIL/STRUCTURAL ENGINEERING FUNCTIONAL AREA QUALIFICATION STANDARD, DOE Defense Nuclear Facilities Technical Personn
DOE–STD–1182-2004, DOE STANDARD CIVIL/STRUCTURAL ENGINEERING FUNCTIONAL AREA QUALIFICATION STANDARD, DOE Defense Nuclear Facilities Technical Personnel. DOE M 426.1-1, Federal Technical Capability Manual, commits the Department to continuously strive for technical excellence. The Technical Qualification Program, along with the supporting Technical Qualification Standards, complements the personnel processes that support the Department's drive for technical excellence. In support of this goal, the competency requirements defined in the Technical Qualification Standards should be aligned with and integrated into the recruitment and staffing processes for technical positions. The Technical Qualification Standards should form the primary basis for developing vacancy announcements, qualification requirements, crediting plans, interviewing questions, and other criteria associated with the recruitment, selection, and internal placement of technical personnel. Office of Personnel Management minimum qualifications standards will be greatly enhanced by application of appropriate materials from the technical Functional Area Qualification Standards.
Ident. Num:
DOE-STD-1182-2004
Rev. Num:
-
DOE–STD–1182-2004, DOE STANDARD CIVIL/STRUCTURAL ENGINEERING FUNCTIONAL AREA QUALIFICATION STANDARD, DOE Defense Nuclear Facilities Technical Personnel. DOE M 426.1-1, Federal Technical Capability Manual, commits the Department to continuously strive for technical excellence. The Technical Qualification Program, along with the supporting Technical Qualification Standards, complements the personnel processes that support the Department's drive for technical excellence. In support of this goal, the competency requirements defined in the Technical Qualification Standards should be aligned with and integrated into the recruitment and staffing processes for technical positions. The Technical Qualification Standards should form the primary basis for developing vacancy announcements, qualification requirements, crediting plans, interviewing questions, and other criteria associated with the recruitment, selection, and internal placement of technical personnel. Office of Personnel Management minimum qualifications standards will be greatly enhanced by application of appropriate materials from the technical Functional Area Qualification Standards.
DOE-STD-1183-2007, DOE STANDARD NUCLEAR SAFETY SPECIALIST FUNCTIONAL AREA QUALIFICATION STANDARD (NOV 2007)
DOE-STD-1183-2007, DOE STANDARD NUCLEAR SAFETY SPECIALIST FUNCTIONAL AREA QUALIFICATION STANDARD (NOV 2007). The Nuclear Safety Specialist FAQS establishes common functional area competency requirements for all DOE nuclear safety specialist personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. The technical FAQS has been developed as a tool to assist DOE program and field offices in the development and implementation of the TQP in their organization. For ease of transportability of qualifications between DOE elements, program and field offices are expected to use this technical FAQS without modification.
Ident. Num:
DOE-STD-1183
Rev. Num:
-
DOE-STD-1183-2007, DOE STANDARD NUCLEAR SAFETY SPECIALIST FUNCTIONAL AREA QUALIFICATION STANDARD (NOV 2007). The Nuclear Safety Specialist FAQS establishes common functional area competency requirements for all DOE nuclear safety specialist personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. The technical FAQS has been developed as a tool to assist DOE program and field offices in the development and implementation of the TQP in their organization. For ease of transportability of qualifications between DOE elements, program and field offices are expected to use this technical FAQS without modification.
DOE-STD-1185-2007, DOE STANDARD NUCLEAR EXPLOSIVE SAFETY STUDY FUNCTIONAL AREA QUALIFICATION STANDARD (SEP 2007)
DOE-STD-1185-2007, DOE STANDARD NUCLEAR EXPLOSIVE SAFETY STUDY FUNCTIONAL AREA QUALIFICATION STANDARD (SEP 2007). A Nuclear Explosive Safety Study (NESS) is performed on all DOE Nuclear Explosive Operations (NEOs) in accordance with DOE Order (O) 452.2C Nuclear Explosive Safety, and DOE-STD-3015-2004, Nuclear Explosive Safety Evaluation Process. This qualification standard applies to Nuclear Explosive Safety Study Group (NESSG) members and chairs. Similar qualifications for non-Federal NESSG members are found in DOE-STD-3015-2004. The NESSG insures that the DOE nuclear explosive safety standards and criteria contained in DOE O 452.2C have been met before the National Nuclear Security Administration (NNSA) approves NEOs.
Ident. Num:
DOE-STD-1185
Rev. Num:
-
DOE-STD-1185-2007, DOE STANDARD NUCLEAR EXPLOSIVE SAFETY STUDY FUNCTIONAL AREA QUALIFICATION STANDARD (SEP 2007). A Nuclear Explosive Safety Study (NESS) is performed on all DOE Nuclear Explosive Operations (NEOs) in accordance with DOE Order (O) 452.2C Nuclear Explosive Safety, and DOE-STD-3015-2004, Nuclear Explosive Safety Evaluation Process. This qualification standard applies to Nuclear Explosive Safety Study Group (NESSG) members and chairs. Similar qualifications for non-Federal NESSG members are found in DOE-STD-3015-2004. The NESSG insures that the DOE nuclear explosive safety standards and criteria contained in DOE O 452.2C have been met before the National Nuclear Security Administration (NNSA) approves NEOs.
DOE-STD-1187-2007, DOE TECHNICAL STANDARD BERYLLIUM-ASSOCIATED WORKER REGISTRY DATA COLLECTION AND MANAGEMENT GUIDANCE (JUN 2007)
DOE-STD-1187-2007, DOE TECHNICAL STANDARD BERYLLIUM-ASSOCIATED WORKER REGISTRY DATA COLLECTION AND MANAGEMENT GUIDANCE (JUN 2007). This standard provides acceptable methods for compliance with the requirements of Title 10 Code of Federal Regulations, Part 850.39 (10 CFR 850.39) “Recordkeeping and Use of Information.” It should be used by responsible employers subject to the requirements of 10 CFR 850 “Chronic Beryllium Disease Prevention Program” to guide their submission of information to the Department of Energy (DOE) Beryllium-Associated Worker Registry. Use of this standard promotes consistent reporting and efficient analysis and dissemination of information to those who need to know.
Ident. Num:
DOE-STD-1187
Rev. Num:
-
DOE-STD-1187-2007, DOE TECHNICAL STANDARD BERYLLIUM-ASSOCIATED WORKER REGISTRY DATA COLLECTION AND MANAGEMENT GUIDANCE (JUN 2007). This standard provides acceptable methods for compliance with the requirements of Title 10 Code of Federal Regulations, Part 850.39 (10 CFR 850.39) “Recordkeeping and Use of Information.” It should be used by responsible employers subject to the requirements of 10 CFR 850 “Chronic Beryllium Disease Prevention Program” to guide their submission of information to the Department of Energy (DOE) Beryllium-Associated Worker Registry. Use of this standard promotes consistent reporting and efficient analysis and dissemination of information to those who need to know.
DOE-STD-1190-2007, DOE STANDARD ILLNESS AND INJURY SURVEILLANCE PROGRAM GUIDELINES
DOE-STD-1190-2007, DOE STANDARD ILLNESS AND INJURY SURVEILLANCE PROGRAM GUIDELINES. This standard provides recommended guidelines for the performance of Illness and Injury Surveillance by occupational medicine programs at Department of Energy (DOE)-owned and operated sites and at DOE-owned, contractor-operated sites regulated by the Atomic Energy Act, Energy Reorganization Act of 1974, and Department of Energy Organization Act, 1977. The aforementioned Acts state that DOE has the legislative mandate to monitor the impact of its operations on the environment, the health of its workforce, and the residents of communities surrounding DOE sites.
Ident. Num:
DOE-STD-1190-2007
Rev. Num:
-
DOE-STD-1190-2007, DOE STANDARD ILLNESS AND INJURY SURVEILLANCE PROGRAM GUIDELINES. This standard provides recommended guidelines for the performance of Illness and Injury Surveillance by occupational medicine programs at Department of Energy (DOE)-owned and operated sites and at DOE-owned, contractor-operated sites regulated by the Atomic Energy Act, Energy Reorganization Act of 1974, and Department of Energy Organization Act, 1977. The aforementioned Acts state that DOE has the legislative mandate to monitor the impact of its operations on the environment, the health of its workforce, and the residents of communities surrounding DOE sites.
DOE-STD-3007-2007, DOE STANDARD GUIDELINES FOR PREPARING CRITICALITY SAFETY EVALUATIONS AT DEPARTMENT OF ENERGY NONREACTOR NUCLEAR FACILITIES (FEB 200
DOE-STD-3007-2007, DOE STANDARD GUIDELINES FOR PREPARING CRITICALITY SAFETY EVALUATIONS AT DEPARTMENT OF ENERGY NONREACTOR NUCLEAR FACILITIES (FEB 2007). This standard provides a framework for generating Criticality Safety Evaluations (CSE) supporting fissionable material operations at Department of Energy (DOE) nonreactor nuclear facilities. This standard imposes no new criticality safety analysis requirements
Ident. Num:
DOE-STD-3007
Rev. Num:
-
DOE-STD-3007-2007, DOE STANDARD GUIDELINES FOR PREPARING CRITICALITY SAFETY EVALUATIONS AT DEPARTMENT OF ENERGY NONREACTOR NUCLEAR FACILITIES (FEB 2007). This standard provides a framework for generating Criticality Safety Evaluations (CSE) supporting fissionable material operations at Department of Energy (DOE) nonreactor nuclear facilities. This standard imposes no new criticality safety analysis requirements
DOE-STD-3025-2007, DOE TECHNICAL STANDARD QUALITY ASSURANCE INSPECTION AND TESTING OF HEPA FILTERS
DOE-STD-3025-2007, DOE TECHNICAL STANDARD QUALITY ASSURANCE INSPECTION AND TESTING OF HEPA FILTERS. This standard establishes essential elements of a DOE program for quality assurance inspection and performance testing of High Efficiency Particulate Air (HEPA) filters to be installed in DOE nuclear facilities that fall within the scope of DOE-STD-3020.
Ident. Num:
DOE-STD-3025-2007
DOE-STD-3025-2007, DOE TECHNICAL STANDARD QUALITY ASSURANCE INSPECTION AND TESTING OF HEPA FILTERS. This standard establishes essential elements of a DOE program for quality assurance inspection and performance testing of High Efficiency Particulate Air (HEPA) filters to be installed in DOE nuclear facilities that fall within the scope of DOE-STD-3020.
DOE-STD-4001-2000, DOE STANDARD DESIGN CRITERIA STANDARD FOR ELECTRONIC RECORDS MANAGEMENT SOFTWARE APPLICATIONS (MAR 2000)
DOE-STD-4001-2000, DOE STANDARD DESIGN CRITERIA STANDARD FOR ELECTRONIC RECORDS MANAGEMENT SOFTWARE APPLICATIONS (MAR 2000)., This Standard establishes the recommended method for meeting the functional requirements of the laws and regulations pertaining to managing records using Electronic Records Management Application (RMA) software. This Standard will be used by DOE Components in the implementation of their records management programs. This standard describes the minimum records management requirements that must be met in accordance with 44 U.S.C. 2902, reference 1.a, and guidance and implementing regulations promulgated by the National Archives and Records Administration (NARA).
Ident. Num:
DOE-STD-4001
Rev. Num:
-
DOE-STD-4001-2000, DOE STANDARD DESIGN CRITERIA STANDARD FOR ELECTRONIC RECORDS MANAGEMENT SOFTWARE APPLICATIONS (MAR 2000)., This Standard establishes the recommended method for meeting the functional requirements of the laws and regulations pertaining to managing records using Electronic Records Management Application (RMA) software. This Standard will be used by DOE Components in the implementation of their records management programs. This standard describes the minimum records management requirements that must be met in accordance with 44 U.S.C. 2902, reference 1.a, and guidance and implementing regulations promulgated by the National Archives and Records Administration (NARA).
DOE-STD-5506-2007, Preparation of Safety Basis Documents for Transuranic (TRU) Waste Facilities
DOE-STD-5506-2007, This Standard provides detailed guidance for consistently analyzing hazards and selecting controls for TRU waste activities. The hazards analysis, accident analysis, and controls for TRU waste activities must be integrated into the overall SB documents for DOE Category 1, 2, or 3 nuclear facilities prepared in accordance with 10 CFR Part 830, Subpart B requirements (or alternate methodology where approved in accordance with the regulation).
Ident. Num:
DOE-STD-5506-2007
DOE-STD-5506-2007, This Standard provides detailed guidance for consistently analyzing hazards and selecting controls for TRU waste activities. The hazards analysis, accident analysis, and controls for TRU waste activities must be integrated into the overall SB documents for DOE Category 1, 2, or 3 nuclear facilities prepared in accordance with 10 CFR Part 830, Subpart B requirements (or alternate methodology where approved in accordance with the regulation).
