Your free source for specifications, standards, and handbooks
DI-RELI
DI-RELI-80247, THERMAL SURVEY REPORT
DI-RELI-80248, VIBRATION SURVEY REPORT
DI-RELI-80249, ENVIRONMENTAL STRESS SCREENING (ESS) REPORT.,
Ident. Num:
DI-RELI-80250
DI-RELI-80250, RELIABILITY TEST PLAN., This plan describes teh overall reliability test planning and its relationship to the total integrated test requirements. It delineates required reliability tests, their purpose, and schedule.
DI-RELI-80251, RELIABILITY TEST PROCEDURES.
Ident. Num:
DI-RELI-80254
Rev. Num:
-
DI-RELI-80254, CORRECTIVE ACTION PLAN. This plan outlines the action to be taken by the contractor when a formal reliability test reaches a reject decision or when pattern failures have been identified.
Ident. Num:
DI-RELI-80255
Rev. Num:
-
DI-RELI-80255, FAILURE SUMMARY AND ANALYSIS REPORT. This report presents a cumulative tabulation of failures that occur prior to and during the reporting period, describes the analysis performed, and encompasses individual Failed Item Analysis Reports prepared during the reporting period.
Ident. Num:
DI-RELI-80261
Rev. Num:
-
DI-RELI-80261, PRODUCTION INSPECTION EQUIPMENT TEST SYSTEMS ENGINEERING DESIGN DATA (17 NOV 1986)., Engineering design data provides information pertinent to the design of components, equipment, or software and necessary for the understanding of these items during subsequent test.
DI-RELI-80323, CERTIFICATION DEMONSTRATION PROCEDURES.
Ident. Num:
DI-RELI-80669
Rev. Num:
A
DI-RELI-80669A, ELECTROSTATIC DISCHARGE (ESD) CONTROL PROGRAM PLAN (28 AUG 1992)., This plan describes the contractor's electrostatic discharge (ESD) control program and the controls and monitoring provisions leveled on subcontractors and suppliers to establish, implement, document, and monitor the ESD control program. The principle use is to provide the acquiring activity a basis for review and evaluation of the ESD control program for determination of contractual compliance.
Ident. Num:
DI-RELI-80671
Rev. Num:
A
DI-RELI-80671A, HANDLING PROCEDURES FOR ELECTROSTATIC DISCHARGE (ESD) SENSITIVE ITEMS. Handling procedures describe the contractor's documented requirements for recurrent personnel training and ESD damage prevention handling procedures for all areas where ESD sensitive items are handled, processes, tested, or packaged.
Ident. Num:
DI-RELI-80685
Rev. Num:
-
DI-RELI-80685, CRITICAL ITEMS LIST (30 SEP 1988)., The Critical Items List (CIL) contains a listing of items which can critically impact the reliability of contract end items.
Ident. Num:
DI-RELI-80687
Rev. Num:
-
DI-RELI-80687, FAILURE MODES, EFFECTS, AND CRITICALITY ANALYSIS (FMECA)REPORT (30 SEP 1988)., The report contains the results of the contractor;s failure modes, effects, and criticality analysis (FMECA).
DI-RELI-80807, FAILURE DATA AND TRACEABILITY RECORD.
Ident. Num:
DI-RELI-81315
Rev. Num:
-
DI-RELI-81315, FAILURE ANALYSIS AND CORRECTIVE ACTION REPORT. Provides immediate reporting of failure and subsequent details of failure analysis results and corrective action recommendations.
Ident. Num:
DI-RELI-81496
Rev. Num:
-
DI-RELI-81496 RELIABILITY BLOCK DIAGRAMS AND MATHEMATICAL MODELS REPORT. This report documents data used to determine mission reliability and support reliability allocations, predictions, assessments, design analyses, and trade-offs associated with end items and units of the hardware breakdown structure.
Ident. Num:
DI-RELI-81497
Rev. Num:
-
DI-RELI-81497, RELIABILITY PREDICTION AND DOCUMENTATION OF SUPPORTING DATA. This report documents contractor quantitative predictions of end item reliability.
DI-RELI-81498, STRUCTURAL DESIGN CRITERIA REPORT (HELICOPTERS).
Ident. Num:
DI-RELI-81500
Rev. Num:
-
DI-RELI-81500, SURVIVABILITY COST EFFECTIVENESS TRADEOFF STUDIES REPORT., This report presents the results of three independent analysis. These are used to indicate the probability that aircraft will survive a specified combat mission against specified threats and to provide measures of cost-effectiveness and design trade-off studies by which candidate survivability enhancement techniques may be evaluated.
