DI-EMCS-80199B, ELECTROMAGNETIC INTERFERENCE CONTROL PROCEDURES (EMICP)(20 AUG 1999)., The EMICP provides data to evaluate the contractor's design procedures and techniques for subsystems and equipment used to meet electromagnetic interference (EMI) control requirements based on MIL-STD-461. This Data Item Description (DID) contains the format and content preparation instructions for the EMICP required by 5.1 of MIL-STD-461. This DID is related to DI-EMCS-80200B, Electromagnetic Interference Test Report (EMITR) and DI-EMCS-80201B, Electromagnetic Interference Test Procedures (EMITP). This DID supersedes DI-EMCS-80199A

DI-EMCS-80200B, ELECTROMAGNETIC INTERFERENCE TEST REPORT (EMITR) (20 AUG 1999)., The EMITR provides the data and information necessary to evaluate compliance of an equipment or subsystem with its electromagnetic interference (EMI) control requirements based on MIL-STD-461, including the discussion of recommended corrective actions, if needed. This Data Item Description (DID) contains the format and content preparation instructions for the EMITR required by 5.1 of MIL-STD-461. This DID is related to DI-EMCS-80199B, Electromagnetic Interference Control Procedures (EMICP), and DI-EMCS-80201B, Electromagnetic Interference Test Procedures (EMITP). This DID supersedes DI-EMCS-80200A.

DI-EMCS-80201B, ELECTROMAGNETIC INTERFERENCE TEST PROCEDURES (EMITP) (20 AUG 1999)., The EMITP describes the measurement procedures that will be used to demonstrate that an equipment or subsystem complies with its contractual electromagnetic interference (EMI) requirements based on MIL-STD-461, including how the general test procedures in the standard will be applied to the specific equipment or subsystem. This Data Item Description (DID) contains the format and content preparation instructions for the EMITP required by 5.1 of MIL-STD-461. This DID is related to DI-EMCS-80199B, Electromagnetic Interference Control Procedures (EMICP), and DI-EMCS-80200B, Electromagnetic Interference Test Report (EMITR). This DID supersedes DI-EMCS-80201A.

DI-EMCS-81295, ELECTROMAGNETIC EFFECTS VERIFICATION PROCEDURES (EMEVP) (31 JUL 1995)., The EMEVP describes the tests, analysis, and inspections to be performed by the contractor and the verification criteria necessary to satisfy the electromagnetic effects (EME) protection requirements.

DI-EMCS-81528, ELECTROMAGNETIC COMPATIBILITY PROGRAM PROCEDURES (14 NOV 1996)., The Electromagnetic Compatibility Program Procedures (EMCPP) provides data necessary to demonstrate that electromagnetic environmental effects (E3) have been met and that they will be satisfied throughout the life cycle of the platform, system, or equipment,

DI-EMCS-81540A, ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3) INTEGRATION AND ANALYSIS REPORT (E3IAR) (19 DEC 2002)., The E3IAR describes implementation of E3 interface and performance requirements into system hardware and software and provides the means for the government to evaluate E3 compliance with requirements throughout the life cycle of the system. a. This DID contains the format and content preparation instructions for data resulting from the work task described by 4.1 of MIL-STD-464 and is intended for airborne, sea, space, and ground systems, including associated ordnance. It is normally applied to the System Design and Development phase of a program, but it can be used in any phase. d. This DID is related to DI-EMCS-81541A and DI-EMCS-81542A.

DI-EMCS-81541A, ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3) VERIFICATION PROCEDURES (E3VP) (19 DEC 2002)., The E3VP describes the methods of test, analysis, and inspection used by the contractor to verify compliance with the electromagnetic environmental effects (E3) interface and performance requirements of a system. The E3VP provides the means for the government to understand and duplicate verification methods used by the contractor to verify E3 requirements. a. This DID contains the format and content preparation instructions for data resulting from the work task described by 4.1 of MIL-STD-464 and is intended for airborne, sea, space, and ground systems, including associated ordnance. It is normally applied to the System Design and Development phase of a program, but it can be used in any phase. d. This DID is related to DI-EMCS-81540A and DI-EMCS-81542A.

DI-EMCS-81542A, ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3) VERIFICATION REPORT (E3VR) (19 DEC 2002)., The E3VR describes the tests, analyses, and inspections used by the contractor and documents the results verifying compliance with the E3 interface and performance requirements of a system. The E3VR provides the means for the government to evaluate E3 verification results. a. This DID contains the format and content preparation instructions for data resulting from the work task described by 4.1 of MIL-STD-464 and is intended for airborne, sea, space, and ground systems, including associated ordnance. It is normally applied to the System Design and Development phase of a program, but it can be used in any phase. d. This DID is related to DI-EMCS-81540A and DI-EMCS-81541A.