Your free source for specifications, standards, and handbooks
COMML ITEM DESC (CID)
Ident. Num:
A-A-1000
Rev. Num:
-
A-A-1000, COMMERCIAL ITEM DESCRIPTION, STAY, FENCE (17 SEP 1980), This commercial item description covers zinc-coated steel fence stays.
Ident. Num:
A-A-1106
Rev. Num:
B
A-A-1106B, COMMERCIAL ITEM DESCRIPTION, EXTINGUISHER, FIRE, CARBON DIOXIDE (31 JAN 1985) [S/S BY UL154]., This commercial item description covers carbon dioxide fire extinguishers intended for use against Class B and C fires.
Ident. Num:
A-A-1192
Rev. Num:
A
A-A-1192A, COMMERCIAL ITEM DESCRIPTION, HANGER, PIPE (13 MAY 1981) [S/S BY MSS-SP58]., This commercial item description covers pipe hangers, brackets, saddles, clamps, and pipe-rols, for all types of piping systems.
Ident. Num:
A-A-1234
Rev. Num:
A
A-A-1234A, COMMERCIAL ITEM DESCRIPTION, BOX, SHIPPING (WOOD, NAIL, AND LOCK-CORNER WITH FULL CLEATED ENDS AND BUTT JOINTS) (BOX; TOP-BOTTOM, SIDES, OR ENDS) (NO S/S DOCUMENT) (24 AUG 1984)., This description covers new nailed and lock-corner wood boxes with full cleated ends and butt joints, assembled, knocked-down, or box parts (top-bottom, sides, or ends) for use as overseas shipping containers.
Ident. Num:
A-A-1241
A-A-1241, COMMERCIAL ITEM DESCRIPTION, BOX, SHIPPING (WOOD, NAIL AND LOCK-CORNER WITH TWO EXTERIOR END CLEATS) (TOP, BOTTOM, SIDE OR END) (11 JAN 1983)., The General Services Administration has authorized the use of this commercial item description in lieu of Federal Specificaiton PPP-B-621 C, Class 2, Style 4, Grade A or 6, Type 2 (average) load. This description covers new nailed and lock-corner wood boxes with two exterior end cleats, assembled, knocked down, or parts (top, bottom, sides, or ends)for use as overseas shipping containers.
Ident. Num:
A-A-1243
Rev. Num:
B
A-A-1243B, COMMERCIAL ITEM DESCRIPTION TAPE, PRESSURE-SENSITIVE ADHESIVE DOUBLE-COATED VINYL, CARPET (13 JAN 1999)., This Commercial Item Description covers double-coated vinyl carpet tape used for adhering carpet to a clean, smooth floor.
Ident. Num:
A-A-1280
Rev. Num:
B
A-A-1280B (NOTICE 1), COMMERCIAL ITEM DESCRIPTIONS (CIDS), SORBENT, OIL (ROLL, SWEEP, PAD) (19 SEP 2003)., A-A-1280B, dated 9 March 1995, has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-1556
Rev. Num:
A
A-A-1556A (NOTICE 1), COMMERCIAL ITEM DESCRIPTION, SEALING COMPOUND (ELASTOMERIC JOINT SEALANT) (4 FEB 2000)., Commercial Item Description A-A-1556A, dated December 17, 1996, is hereby cancelled. ASTM C 920, Standard Specification For Elastomeric Joint Sealants, will be used for future procurements of this commodity.
Ident. Num:
A-A-1558
Rev. Num:
A
A-A-1558A (NOTICE 1), COMMERCIAL ITEM DESCRIPTION, PAINT, STENCIL (21 OCT 2004)., Commercial Item Description, A-A- 1558A dated June 2, 1992 has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-1686
Rev. Num:
B
A-A-1686B, COMMERCIAL ITEM DESCRIPTION, TAPE, PRESSURE-SENSITIVE ADHESIVE, (LOW-TENSILE STRENGTH, POLYESTER FILAMENT, REINFORCED TAPE) (9 DEC 1982) [SUPERSEDES PPP-T-97] [S/S BY ASTM-D5330]. , This commercial item description covers a low-tensile strength polyester filament reinforced tape.
Ident. Num:
A-A-1689
Rev. Num:
B
A-A-1689B, COMMERCIAL ITEM DESCRIPTION, TAPE, PRESSURE-SENSITIVE ADHESIVE (PLASTIC FILM) (18 MAY 1989)., This commercial item description covers pressure-sensitive adhesive tape designed for sealing out moisture and sealing interior packaging. In addition to the above uses, Type I, Class 2 tape can also be used for color coding and identification and Type II tape can be used where marking or printing is required.
Ident. Num:
A-A-1722
Rev. Num:
-
A-A-1722 (NOTICE 1), COMMERCIAL ITEM DESCRIPTION, GRAIN, ABRASIVE (SOFT BLASTING) (23 AUG 1995)., Commercial Item Description A-A-1722, dated February 5, 1981, has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-1722
Rev. Num:
-
A-A-1722, COMMERCIAL ITEM DESCRIPTION, GRAIN, ABRASIVE (SOFT BLASTING) (5 FEB 1981), This commercial item description covers soft abrasive grains to be used as abrasive blasting material for the removal of carbon from metallic surfaces.
Ident. Num:
A-A-180
Rev. Num:
C
A-A-180C, COMMERCIAL ITEM DESCRIPTION, TAPE, PRESSURE-SENSITIVE ADHESIVE DOUBLE-COATED (24 JUL 1997)., This Commercial Item Description covers double-coated tapes used for mounting photos, drawings, mounting plates used for identification, decoration, holding heavier items, such as nameplates on doors or walls.
Ident. Num:
A-A-1909
A-A-1909 (NOTICE 2), COMMERCIAL ITEM DESCRIPTION, FERTILIZER (14 FEB 1996)., Commercial Item description A-A-1909 dated February 21, 1982, including Notice 1 dated April 1, 1992, is hereby canceled without replacement.
Ident. Num:
A-A-1922A
Rev. Num:
A
A-A-1922A (NOTICE 2), COMMERCIAL ITEM DESCRIPTIONS (CIDS), SHIELD, EXPANSION (CAULKING ANCHORS, SINGLE LEAD)(28 JUN 2006)., A-A-1922A, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-1923
Rev. Num:
A
A-A-1923A (NOTICE 2), COMMERCIAL ITEM DESCRIPTIONS (CIDS), SHIELD EXPANSION (LAG, MACHINE AND EXTERNALLY THREADED WEDGE BOLT ANCHORS)(28 JUN 2006)., A-A-1923A, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-1924
Rev. Num:
A
A-A-1924A (NOTICE 2), COMMERCIAL ITEM DESCRIPTIONS (CIDS), SHIELD, EXPANSION (SELF DRILLING TUBULAR EXPANSION SHELL BOLT ANCHORS) (28 JUN 2006)., A-A-1924A, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-1925
Rev. Num:
A
A-A-1925A (NOTICE 2), COMMERCIAL ITEM DESCRIPTIONS (CIDS), SHIELD, EXPANSION (NAIL ANCHORS)(28 JUN 2006)., A-A-1925A, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-1928
Rev. Num:
C
A-A-1928C, COMMERCIAL ITEM DESCRIPTION, PADLOCK (COMBINATION) (15 MAR 2002)., This Commercial Item Description (CID) covers combination padlocks intended for low security use.
Ident. Num:
A-A-20181
Rev. Num:
A
A-A-20181A, COMMERCIAL ITEM DESCRIPTION, BAKERY MIXES, PREPARED (16 DEC 1996)., This Commercial Item Description (CID) covers bakery mixes, packed in commercially acceptable containers, suitable for use by the Federal Government.
Ident. Num:
A-A-20331
Rev. Num:
-
A-A-20331, COMMERCIAL ITEM DESCRIPTION, FOOD PACKET, SURVIVAL, AIRCRAFT LIFE RAFT (5 JAN 2000) [SUPERSEDING MIL-F-15381]., The U.S. Department of Agriculture (USDA) has authorized the use of this Commercial Item Description as a replacement for Military Specification MIL-F-15381. This Commercial Item Description (CID) covers special purpose food packets, designed for survival and for use in life rafts in aircraft, packed in commercially acceptable, flexible containers suitable for use by Federal, State, local governments and other interested parties, and as a component of operational rations.
Ident. Num:
A-A-2042
Rev. Num:
-
A-A-2042, COMMERCIAL ITEM DESCRIPTION, LAMP, INCANDESCENT (SEALED BEAM,TRADE NO. 4546) (31 AUG 1982)., This description covers a sealed beam incandescent lamp for a hand lantern.
Ident. Num:
A-A-2067
Rev. Num:
-
A-A-2067, COMMERCIAL ITEM DESCRIPTION, LAMP, INCANDESCENT (TUNGSTEN-HALOGEN, TRADE NO. Q100T3/6CL (10 DEC 1982)., This description covers a clear Tungsten-Halogen incandescent lamp for airport runway use
Ident. Num:
A-A-2132
Rev. Num:
A
A-A-2132A, COMMERCIAL ITEM DESCRIPTION HOSE ASSEMBLY, NONMETALLIC (FIRE, 800 LBS. TEST PRESSURE) (4 OCT 1983)., This description covers high pressure, all synthetic double-jacketed fire hoses, with couplings, for fire protection purposes and shall be furnished in the following sizes.
Ident. Num:
A-A-2246
A-A-2246, COMMERCIAL ITEM DESCRIPTION, PAINT, LATEX (GLOSS, INTERIOR) (27 JUN 1984)., This description covers 5 types of gloss latex paint for interior use as follows: Type I - High hiding white suitable for tinting to pastel shades Type II - Ready mixed colors Type III - Medium shade tint base Type IV - Deep tone tint base Type V - Ultra deep tone tint base
Ident. Num:
A-A-2247
A-A-2247, COMMERCIAL ITEM DESCRIPTION, PAINT, LATEX (SEMI-GLOSS, INTERIOR) (27 JUN 1984)., This description covers 5 types of semi-gloss latex paint for interior use as follows: Type I - High hiding white suitable for tinting to pastel shades Type II - Ready mixed colors Type III - Medium shade tint base Type IV - Deep tone tint base Type V - Ultra deep tone tint base
Ident. Num:
A-A-2248
Rev. Num:
-
A-A-2248, COMMERCIAL ITEM DESCRIPTION PAINT, LATEX (FLAT, INTERIOR) (27 JUN 1984)., This description covers 5 types of flat latex paint for interior use as follows: Type I - High hiding white suitable for tinting to pastel shades Type II - Ready mixed colors Type III - Medium shade tint base Type IV - Deep tone tint base Type V - Ultra deep tone tint base
Ident. Num:
A-A-2336A
Rev. Num:
A
A-A-2336A, COMMERCIAL ITEM DESCRIPTION, PRIMER COATING, (ALKYD, EXTERIOR WOOD, WHITE AND TINTS) (1 NOV 1995)., This commercial item description covers one type of pigmented exterior alkyd primer coating having a maximum Volatile Organic Compound Content of 250 grams per liter. This primer is intended for use over wood.
Ident. Num:
A-A-2340
Rev. Num:
-
A-A-2340, COMMERCIAL ITEM DESCRIPTION, PRIMER COATING (LATEX, WHITE, FOR GYPSUM WALLBOARD) (15 JAN 1985)., The container shall not be corroded and the primer shall be free from biological growth or putrid odor. The primer shall be redispersible by a maximum of 5 minutes hand stirring to a uniform, usable condition free from persistent foam (ASTM D 2931, par 7.1).
Ident. Num:
A-A-2380
A-A-2380, COMMERCIAL ITEM DESCRIPTION, DISPENSER, PAPER TOWEL (22 AUG 1985)., This description covers paper towel dispensers.
Ident. Num:
A-A-2398
Rev. Num:
B
A-A-2398B, COMMERCIAL ITEM DESCRIPTION, CURTAIN, SHOWER AND WINDOW (22 SEP 1993)., The General Services Administration has authorized the use of this Commercial Item Description in preference to Federal Specification L-C-780.
Ident. Num:
A-A-2522
Rev. Num:
A
A-A-2522A, COMMERCIAL ITEM DESCRIPTION RAGS, WIPING (COTTON AND COTTON-SYNTHETIC) (19 JAN 1994)., This commercial item description covers cotton and cotton-synthetic blended wiping rags made from unused or reclaimed fabrics intended for use in wiping water, oil, and grease from machinery and for miscellaneous cleaning.
Ident. Num:
A-A-2622
Rev. Num:
-
A-A-2622, COMMERCIAL ITEM DESCRIPTION, ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING (20 FEB 1990)., This commercial item description covers either straight or reducing adapters, to connect hose-threaded ends to pipe-threaded ends. Adapters covered by this commercial item description are intended for applications involving air, oil, gas, and water. They are to be used in connecting units having one type of thread to units having another type of thread.
Ident. Num:
A-A-2622
Rev. Num:
A
A-A-2622A (NOTICE 1), COMMERCIAL ITEM DESCRIPTIONS (CIDS), ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING (20 JUN 2003)., A-A-2622A, dated 17 February 1998, has been reviewed and determined to be valid for use in acquisition
Ident. Num:
A-A-2668
Rev. Num:
-
A-A-2668, COMMERCIAL ITEM DESCRIPTION DISPENSER, TOILET PAPER, CABINET (26 APR 1990)., This commercial item description covers the requirements for toilet paper dispenser cabinets.
Ident. Num:
A-A-2681
Rev. Num:
-
A-A-2681, COMMERCIAL ITEM DESCRIPTION, PLASTIC SHEET, PRESSURE SENSITIVE ADHESIVE COATED, PAPER-BACKED (19 FEB 1991) [S/S BY A-A-2848]., This commercial item description covers cellulose acetate and polyester plastic sheets having an adhesive paper-backing.
Ident. Num:
A-A-271
Rev. Num:
-
A-A-271, COMMERCIAL ITEM DESCRIPTION, BICYCLES, MEN' S, & WOMEN' S (25 FEB 1980)., This commercial item description covers commercial men's and women's bicycles for the style, type, and class specified herein.
Ident. Num:
A-A-272
Rev. Num:
A
A-A-272A (NOTICE 2), COMMERCIAL ITEM DESCRIPTION, CAULKING COMPOUNDS (20 OCT 1999)., Commercial Item Description, A-A-272A dated June 7, 1995, needs the IMPROVEMENT BLOCK corrected as shown below.
Ident. Num:
A-A-272
Rev. Num:
B
A-A-272B, COMMERCIAL ITEM DESCRIPTION, CAULKING COMPOUNDS (7 JUN 1995)., This Commercial Item Description covers three types of 1-part caulking compounds suitable for use as recommended by the manufacturers for sealing, caulking, filing, leveling and glazing in general exterior architectural service and structures. Unless otherwise specified, these requirements are predicated on caulking applied to maximum joints 0.375” wide by 0.375” deep, filled by either cartridge injection or hand spatula.
Ident. Num:
A-A-2745
Rev. Num:
A
A-A-2745A (NOTICE 1), COMMERCIAL ITEM DESCRIPTION, SPRINKLER, LAWN (15 NOV 2000)., Commercial Item Description A-A-2745A dated April 1; 1994 is hereby cancelled without replacement.
Ident. Num:
A-A-2745
Rev. Num:
A
A-A-2745A, COMMERCIAL ITEM DESCRIPTION SPRINKLER, LAWN (1 APR 1964)., This commercial item description covers water activated surface connected sprinklers for watering, soaking, or sprinkling lawns and gardens.
Ident. Num:
A-A-2848
Rev. Num:
-
A-A-2848, COMMERCIAL ITEM DESCRIPTION PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE (PET) AND GLYCOL-MODIFIED POLYETHYLENE TEREPHTHALATE (PETG) (5 APR 1994)., This commercial item description covers polyester type plastic sheets, rolls, and strips.
Ident. Num:
A-A-2850
Rev. Num:
-
A-A-2850, COMMERCIAL ITEM DESCRIPTION, COATING COMPOUND, WATERBORNE POLYMERIC (INTERIOR, WOOD) (3 FEB 1994)., This description covers a low VOC clear waterbome polymeric coating in three gloss levels for application by brush or spray. The coating is intended for use as a topcoat on interior wood, but is not suitable for use on floors.
Ident. Num:
A-A-2886
Rev. Num:
B
A-A-2886B, COMMERCIAL ITEM DESCRIPTION, PAINT, TRAFFIC, SOLVENT BASED (19 OCT 2004)., This commercial item description covers a solvent based traffic paint suitable for application to traffic bearing surfaces such as Portland cement, concrete, bituminous pavement, and plain or vitrified brick surfaces of streets, highways, bridges, tunnels, runways and parking lots.
Ident. Num:
A-A-2897
Rev. Num:
-
A-A-2897, COMMERCIAL ITEM DESCRIPTION BUTANE, PROPANE, AND BUTANE-PROPANE MIXTURES (5 JAN 1995) (S/S BY GPA-2140)., This description covers commercial liquefied petroleum gases, also know as LP gases.
Ident. Num:
A-A-2904
A-A-2904 (NOTICE 1), COMMERCIAL ITEM DESCRIPTION, THINNER, PAINT, MINERAL SPIRITS, REGULAR AND ODORLESS (20 MAR 2001), Commercial Item Description A-A-2904, dated December 01, 1995, is hereby canceled. Military Performance Specification MIL-PRF-680, Decreasing Solvent may be used for future procurements of this commodity.
Ident. Num:
A-A-3007
Rev. Num:
-
A-A-3007, COMMERCIAL ITEM DESCRIPTION THINNER: FOR PHENOL-FORMALDEHYDE AND MEDIUM OIL AND STYRENATED ALKYD PAINTS AND VARNISHES (16 JUL 1996)., This commercial item description covers paint thinners intended for reducing the viscosity of styrenated alkyd enamels and medium and long oil alkyd enamels. The thinner is also intended for reducing phenol-formaldehyde spar varnishes.
Ident. Num:
A-A-3059
A-A-3059, COMMERCIAL ITEM DESCRIPTION, PAINT: PHOTOLUMINESCENT, NONRADIOACTIVE, INTERIOR (29 JAN 1997) [SUPERSEDING TT-P-54C]., This commercial item description describes three grades of interior, latex, phosphorescent paint. These paints are nonflammable; nonradioactive, and me,et the luminance requirements of the International Maritime Organization (lMO) for Passenger Ships. They are capable of being applied to paint primers and topcoats and are visibly luminescent in the dark for a minimum of six hours.
Ident. Num:
A-A-3120
Rev. Num:
-
A-A-3120 (NOTICE 2), COMMERCIAL ITEM DESCRIPTION, PAINT: FOR SWIMMING POOLS (6 AUG 2003)., Commercial Item Description A-A-3 120, dated September 5, 1997 is hereby reinstated and may be used for acquisition.
Ident. Num:
A-A-3130
Rev. Num:
A
A-A-3130A, COMMERCIAL ITEM DESCRIPTION, PAINT (FOR APPLICATION TO WET SURFACES) (13 JUN 2003)., This commercial item description covers a liquid paint for application to an abrasive-blasted, steel surface, which is wet with condensation or flowing water, at the time of application. The paints designed for long-term corrosion protection of the steel in the condensing or immersion environment.
Ident. Num:
A-A-3132A
Rev. Num:
A
A-A-3132A, COMMERCIAL ITEM DESCRIPTION, COATING SYSTEM: EPOXY PRIMER/URETHANE TOPCOAT, FOR MINIMALLY PREPARED ATMOSPHERIC STEEL (13 JUN 2003)., This coating system consists of a commercially available epoxy primer and urethane topcoat, produced by a single manufacturer, and marketed for use as a system. The coating system is suitable for use on minimally prepared rusted and /or painted ferrous metal substrates. As a minimum, the topcoat shall be available in white, black, gray, and safety yellow.
Ident. Num:
A-A-3165
Rev. Num:
A
A-A-3165A, COMMERCIAL ITEM DESCRIPTION LACQUER, GLOSS, FOR AIRCRAFT USE (16 NOV 2007)., The General Services Administration has authorized the use of this commercial item description as a replacement for Federal Specification TT-L-32 for all federal agencies. This description covers a durable, pigmented, high gloss lacquer for spray or hand application on primed or prepared surfaces.
Ident. Num:
A-A-344
Rev. Num:
A
A-A-344A, COMMERCIAL ITEM DESCRIPTION, LACQUER (CLEAR GLOSS) (30 APR 1984)., This description covers a water-clear high-gloss lacquer for application by brush, cloth, or roller. The lacquer is intended for general interior and exterior primed metal or sealed wood.
Ident. Num:
A-A-344B
Rev. Num:
B
A-A-344B (NOTICE 1), COMMERCIAL ITEM DESCRIPTION, LACQUER, CLEAR GLOSS, EXTERIOR/INTERIOR (26 JUL 2001)., Commercial Item Description A-A-344B, dated August 15, 1996: is hereby canceled without replacement.
Ident. Num:
A-A-373
Rev. Num:
A
A-A-373A, COMMERCIAL ITEM DESCRIPTION, GLAZING COMPOUND, SASH (METAL) FOR BACK BEDDING AND FACE GLAZING (NOT FOR CHANNEL OR STOP GLAZING) (23 JUL 1980) [SUPERSEDING TT-G-410] [S/S BY ASTM-C669]., This commercial item description covers glazing materials for the use on steel, aluminum, and other metal sash and is applicable for exterior or interior exposure.
Ident. Num:
A-A-378
A-A-378(NOTICE 1), COMMERCIAL ITEM DESCRIPTIONS (CIDS), PUTTY, LINSEED OIL TYPE, (FOR WOOD SASH GLAZING) (4 NOV 1999)., A-A-378, dated 18 October 1979, is hereby canceled without replacement.
Ident. Num:
A-A-393
Rev. Num:
A
A-A-393A, COMMERCIAL ITEM DESCRIPTION, EXTINGUISHER, FIRE, DRY CHEMICAL (HAND PORTABLE) (2 OCT 1996)., This commercial item description (CID) covers dry chemical hand portable fire extinguishers.
Ident. Num:
A-A-50012
A-A-50012 (NOTICE 1), COMMERCIAL ITEM DESCRIPTIONS (CIDS), GARBAGE DISPOSAL MACHINE, COMMERCIAL (19 SEP 2003)., A-A-50012, dated 28 October 1981, has been reviewed and determined to be valid for use in acquisition
Ident. Num:
A-A-50012
Rev. Num:
-
A-A-50012, COMMERCIAL ITEM DESCRIPTION, GARBAGE DISPOSAL MACHINE, COMMERCIAL (28 OCT 1981)., This commercial item description covers commercial garbage disposal machines for automatic grinding and disposal of food scraps.
Ident. Num:
A-A-50032B
Rev. Num:
B
A-A-50032B (NOTICE 1), COMMERCIAL ITEM DESCRIPTION, FANS, VENTILATING, PROPELLER (11 DEC 1998)., A-A-50032B, dated September 10, 1992, is hereby canceled without replacement.
Ident. Num:
A-A-50032B
Rev. Num:
B
A-A-50032B, COMMERCIAL ITEM DESCRIPTION, FANS, VENTILATING, PROPELLER (10 SEP 1992)., This commercial item description covers propeller ventilating fans for non-hazardous and hazardous locations in the following types, classes, styles, and sizes as specified.
Ident. Num:
A-A-50037
Rev. Num:
A
A-A-50037A, COMMERCIAL ITEM DESCRIPTION, GRIDDLES, SELF HEATING, GAS, COUNTER OR STAND MOUNTED (26 SEP 1986)., This commercial item description covers gas heated griddles for counter or stand mounting in the following types and sizes.
Ident. Num:
A-A-50045
Rev. Num:
-
A-A-50045, COMMERCIAL ITEM DESCRIPTION, DISPENSER, CONDIMENTS, COUNTERTOP (18 MAR 1983) [SUPERSEDING MIL-D-43551].
Ident. Num:
A-A-50094
A-A-50094 (NOTICE 2) COMMERCIAL ITEM DESCRIPTION, BALER, AUTOMATIC, VERTICAL (9 MAY 1995)., Commercial item description A-A-50094, dated February 26, 1987, is hereby reinstated and may be used for acquisition.
Ident. Num:
A-A-50271
A-A-50271, COMMERCIAL ITEM DESCRIPTION, PLATE, IDENTIFICATION (1 FEB 1996) [SUPERSEDING MIL-P-514D]., This commercial item description covers identification plates for attachment to equipment ot provide identification and other miscellaneous data.
Ident. Num:
A-A-50272
Rev. Num:
-
A-A-50272, COMMERCIAL ITEM DESCRIPTION ADHESIVES, EPOXY (28 OCT 1997) (S/S MIL-A-47280)., This Commercial Item Description (CID) covers two types of room temperature curing, epoxy adhesives. These epoxy adhesives are intended for bonding metal to metal, metal to plastic, plastic to plastic, and electronic components to boards or metal surfaces where excellent physical and electrical properties are required.
Ident. Num:
A-A-50352
Rev. Num:
B
A-A-50352B, COMMERCIAL ITEM DESCRIPTION, CLAMP, MATERIAL LIFTING (PLATE, VERTICAL LIFT) (29 MAR 1991)., This CID covers vertical plate material lifting clamps of the eccentric cam gripping type with the lock-open, lock-closed feature for use with various mobile and overhead cranes in lifting, turning, and moving or transporting flat steel plate.
Ident. Num:
A-A-50352C
Rev. Num:
C
A-A-50352C (NOTICE 1), COMMERCIAL ITEM DESCRIPTION, CLAMP, MATERIAL LIFTING (PLATE, VERTCAL LIFT) (19 MAR 2003)., A-A-50352 dated 27 Mar 1998 has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-50354
Rev. Num:
B
A-A-50354B, COMMERCIAL ITEM DESCRIPTION, COFFEE MAKERS, PERCOLATOR: ELECTRIC (4 MAR 1996)., This commercial item description covers automatic, commercial percolator type coffee makers equipped with integral electrical heating elements, and a draw-off faucet. These coffee makers are intended for use in coffee messes, clubs for military personnel, cafeterias, exchanges, large galley messes where larger spray-over and pour-over coffee makers are required, and for stand-by, off-hour service in large mess halls.
Ident. Num:
A-A-50435
Rev. Num:
B
A-A-50435B, COMMERCIAL ITEM DESCRIPTION, ROPES (ARAMID) (24 MAR 1992)., This commercial item description covers four strand Aramid Fiber Rope which is intended for use as mooring lines and floating dry dock tending lines.
Ident. Num:
A-A-50456
A-A-50456, COMMERCIAL ITEM DESCRIPTION, VALVES, RADIATOR, HEATING, PACKED BONNET, 100 AND 150 PSIG (15 JAN 1982)., This Commercial Item Description covers the requirements for Valves, Radiator, Heating (packed bonnet). Stuffing box with adjustable packing unit for classes 100 and 150 psig of the straight way and angle globe pattern for steam service with female threaded inlet and male threaded outlet connection with union nut and male threaded tailpiece and hand wheel operator.
Ident. Num:
A-A-50457
Rev. Num:
-
A-A-50457, COMMERCIAL ITEM DESCRIPTION, VALVES, RADIATOR, HEATING, PACKLESS BONNET, 125 PSIG (15 JAN 1982)., This commercial item description covers the requirements for Valves, Raditor, Heating, Packless Bonnet. Metallic diaphragm seal for class 125 psig of the angle globe pattern for steam service with female threaded inlet and male threaded outlet connections with union nut and male threaded tailpiece and hand wheel operator.
Ident. Num:
A-A-50457A
Rev. Num:
A
A-A-50457A (NOTICE 2)., COMMERCIAL ITEM DESCRIPTIONS (CIDS), VALVES, RADIATOR, HEATING PACKLESS BONNET, CLASS 125 PSIG (14 JUN 2006)., A-A-50457A, dated 06 August 2001, has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-50458
Rev. Num:
-
A-A-50458, COMMERCIAL ITEM DESCRIPTION, VALVES, RADIATOR, HEATING, PACKLESS BONNET, 25 PSIG (15 JAN 1982)., This Commercial Item Description covers the requirements for Valves, Radiator, Heating (packless bonnet). Metallic bellows seal for class 25 psig of the straight and angle globe pattern for steam service with female threaded inlet and male threaded outlet connection with union nut and male threaded tailpiece and hand wheel operator.
Ident. Num:
A-A-50459
Rev. Num:
-
A-A-50459, COMMERCIAL ITEM DESCRIPTION, SHEARS, METAL CUTTING, ELECTRIC (PORTABLE) (24 MAY 1983)., This commercial item description covers commercial shears that are used for straight or contour cutting of ferrous and nonferrous materials.
Ident. Num:
A-A-50459A
Rev. Num:
A
A-A-50459A, COMMERCIAL ITEM DESCRIPTION, SHEARS, METAL CUTTING, ELECTRIC (PORTABLE) (14 APR 1989)., This commercial item description (CID) covers two types of portable electric shears for straight and/or contour cutting of ferrous and nonferrous sheet materials.
Ident. Num:
A-A-50460A
Rev. Num:
A
A-A-50460A, COMMERCIAL ITEM DESCRIPTION, CARRIER, STORAGE BATTERY, HAND (21 AUG 1989)., Hand transported storage battery carriers are used in automotive and battery service stations to facilitate the safe handling of storage batteries and to prevent breakage and accidental contact by personnel with spilled acid.
Ident. Num:
A-A-50460B
Rev. Num:
B
A-A-50460B (NOTICE 1), COMMERCIAL ITEM DESCRIPTIONS (CIDS), CARRIER, STORAGE BATTERY, HAND (19 SEP 2003)., A-A-50460B, dated 18 February 1998, has been reviewed and determined to be valid for use in acquisition
Ident. Num:
A-A-50461B
Rev. Num:
B
A-A-50461B, COMMERCIAL ITEM DESCRIPTION, NOZZLES; GARDEN HOSE (FOR 5/8- AND 3/4-INCH HOSE) (26 MAR 1993)., This Commercial Item Description (CID) covers the requirements for garden hose nozzles, for 5/8- and 3/4-inch hose. The nozzles shall be of a twist type flow-control, and shall regulate the flow of water from full close position to fine spray, jet stream, and flood stream.
Ident. Num:
A-A-50461C
Rev. Num:
C
A-A-50461C (NOTICE 1), COMMERCIAL ITEM DESCRIPTIONS (CIDS), NOZZLES; GARDEN HOSE (FOR 5/8- AND 3/4-INCH HOSE) (19 SEP 2007)., A-A-50461C, dated 04 December 2002, has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-50464
Rev. Num:
B
A-A-50464B, COMMERCIAL ITEM DESCRIPTION, CAP, FLUE, CYLINDRICAL (13 FEB 1996)., The flue caps are intended to be used as a chimney outlet component for single wall flue gas vent from oil-fired appliances.
Ident. Num:
A-A-50468
Rev. Num:
A
A-A-50468A, COMMERCIAL ITEM DESCRIPTION, GATE, BLAST, LOW PRESSURE, SHEET METAL PIPE SYSTEMS (29 MAR 1991)., This CID covers metal blast gates designed for use in round, low pressure type, sheet metal air ducts.
Ident. Num:
A-A-50469B
Rev. Num:
B
A-A-50469B, COMMERCIAL ITEM DESCRIPTION, HOOK, REGULAR EYE, LATCH TYPE (3 JUN 1994)., This CID applies to latch type hooks that support a load in a direct-pull configuration, and such load is carried in the base (bowl-saddle) of the hook. The hook is intended for use in material handling operations.
Ident. Num:
A-A-50470
Rev. Num:
B
A-A-50470B, COMMERCIAL ITEM DESCRIPTION, OILERS, HAND, FILLER (21 JUN 21 1993)., This CID covers the requirements for filler hand oilers intended to be used for filling large oil cups on heavy machinery with heavier oils, such as 30 or 40 grade. The oiler shall be similar to figure 1 and shall be of either cold-rolled steel or copper as specified in the contract or order. The oiler shall consist essentially of a one-piece seamless body with attached bottom, handle, spout, cap, and chain, when specified in contract or order. The oiler shall comply with the requirements of table I for the size as specified in the contract or order.
Ident. Num:
A-A-50472
Rev. Num:
A
A-A-50472A, COMMERCIAL ITEM DESCRIPTION, HOOK, SWIVEL, LATCH TYPE (21 SEP 1988)., This commercial item description (CID) applies to latch type swivel hoist hooks that support a load in a direct-pull configuration, and such load is carried in the base (bowl-saddle) of the hook. The hook is intended for use in material handling operations.
Ident. Num:
A-A-50473
Rev. Num:
B
A-A-50473B, COMMERCIAL ITEM DESCRIPTION, OILERS, HAND, PUSH-BOTTOM (21 JUN 1993)., This CID covers the requirements for push-bottom hand oilers. The oiler shall be of cold-rolled steel. The oiler shall consist essentially of a top section with spring-action bottom, a washer, and a threaded removable spout.
Ident. Num:
A-A-50475B
Rev. Num:
B
A-A-50475B, COMMERCIAL ITEM DESCRIPTION, POLISHER, FLOOR, ELECTRIC, DIVIDED WEIGHT (COMMERCIAL TYPE) (3 JAN 1994)., This CID covers commercial type electric floor polishers which are used for heavy-duty wet or dry scrubbing, for polishing and buffing wood, tile, or linoleum covered floors, and for rug shampooing.
Ident. Num:
A-A-50476
Rev. Num:
B
A-A-50476B, COMMERCIAL ITEM DESCRIPTION, POLISHER, FLOOR, ELECTRIC, CONCENTRATED WEIGHT TWO-BRUSH (COMMERCIAL TYPE) (21 JAN 21 1994)., This CID covers commercial type electric floor polishers that are used for heavy-duty wet or dry scrubbing, for polishing and buffing wood, tile or linoleum.
Ident. Num:
A-A-50477
Rev. Num:
C
A-A-50477C, COMMERCIAL ITEM DESCRIPTION, OILERS, HAND, PUMP (21 JUN 1993)., This CID covers the requirements for hand-operated pump oilers. Configuration of the oiler shall be class A, lever-operated pump oiler, with handle; class B, lever-operated pump oiler, without handle; or class C, plunger-operated pump oiler, with handle, as specified in the contract or order.
Ident. Num:
A-A-50478
Rev. Num:
B
A-A-50478B, COMMERCIAL ITEM DESCRIPTION, POLISHER, FLOOR, ELECTRIC, CONCENTRATED WEIGHT SINGLE BRUSH (COMMERCIAL TYPE) (21 JAN 1994)., This CID covers commercial type electric floor polishers that are used for heavy-duty wet or dry scrubbing, for polishing and buffing wood and tile or linoleum covered floors, and for rug shampooing.
Ident. Num:
A-A-50486A
Rev. Num:
A
A-A-50486A, COMMERCIAL ITEM DESCRIPTION, CONTAINER, INSULATED, SHIPPING (NOV 23, 1992)., The containers covered by this commercial item description are used for temporary storage of frozen food for periods up to 24 hours.
Ident. Num:
A-A-50492
Rev. Num:
A
A-A-50492A, COMMERCIAL ITEM DESCRIPTION OILERS, AIR LINE (REPLACES MIL-O-82042)., This Commercial Item Description is approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies. This CID is to be used in preference to Military Specification MIL-0-82042, which is canceled.
Ident. Num:
A-A-50493
A-A-50493 COMMERCIAL ITEM DESCRIPTION OIL, PENETRATING (FOR LOOSENING FROZEN METALLIC PARTS)., The General Service Administration has authorized the use of this commercial item description (CID) as a replacement for Federal Specification VV-P-216c which is canfeled.
Ident. Num:
A-A-50493B
Rev. Num:
B
A-A-50493B (NOTICE 1), COMMERCIAL ITEM DESCRIPTIONS (CIDS), OIL, PENETRATING (FOR LOOSENING FROZEN METALLIC PARTS)(17 NOV 2006)., A-A-50493B, dated 30 August 2001, has been reviewed and determined to be valid for use in acquisition.
Ident. Num:
A-A-50494
A-A-50494 (NOTICE 1), COMMERCIAL ITEM DESCRIPTION, EXHAUST HEAD, STEAM (27 NOV 2002)., Commercial Item Description A-A-50494, dated 16 April 1990, is hereby canceled without replacement. Exhaust heads manufactured using this CID are no longer used or required.
Ident. Num:
A-A-50494
A-A-50494, COMMERCIAL ITEM DESCRIPTION, EXHAUST HEAD, STEAM (16 APR 1990)., This description covers exhaust heads made of cast iron or steel, for moisture and oil entrapment and discharge of exhaust steam into the atmosphere.
Ident. Num:
A-A-50495
Rev. Num:
B
A-A-50495B, COMMERCIAL ITEM DESCRIPTION HEATING ELEMENT, ELECTRICAL (REPLACEMENTS FOR DOMESTIC APPLIANCES) (20 SEP 1995)., The electrical heating element is intended to be used as a replacement item for domestic water heaters, ranges, dishwashers, dryers, and hot plates.
Ident. Num:
A-A-50496
Rev. Num:
-
A-A-50496, COMMERCIAL ITEM DESCRIPTION, COFFEE MAKER, PERCOLATOR, ELECTRIC (10 SEP 1990)., This commercial item description covers automatic, percolator-type coffee makers equipped with integral electric heating elements and pouring spout.
Ident. Num:
A-A-50497
A-A-50497, COMMERCIAL ITEM DESCRIPTION, COFFEE MAKER, ELECTRIC, AUTOMATIC (11 SEP 1990)., This commercial item description covers coffee makers comprising bowl units (metal or glass) with 12 cup (60 ounce) minimum brewing capacity. The coffee maker includes a thermostatically controlled heat exchanger or electrically heated tank to make available hot water for continuous operation.